Merge branch 'dp83640-next'

Stefan Sørensen says:

====================
dp83640: Increase support perout pins

This patch series increases the number of periodic output pins supported
on the dp83640 to 7, and allows for reprogramming the calibration pin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/dp83640.c

@@ -40,6 +40,7 @@
 #define LAYER2		0x01
 #define MAX_RXTS	64
 #define N_EXT_TS	6
+#define N_PER_OUT	7
 #define PSF_PTPVER	2
 #define PSF_EVNT	0x4000
 #define PSF_RX		0x2000
@@ -47,7 +48,6 @@
 #define EXT_EVENT	1
 #define CAL_EVENT	7
 #define CAL_TRIGGER	7
-#define PER_TRIGGER	6
 #define DP83640_N_PINS	12
 
 #define MII_DP83640_MICR 0x11
@@ -300,23 +300,23 @@ static u64 phy2txts(struct phy_txts *p)
 }
 
 static int periodic_output(struct dp83640_clock *clock,
-			   struct ptp_clock_request *clkreq, bool on)
+			   struct ptp_clock_request *clkreq, bool on,
+			   int trigger)
 {
 	struct dp83640_private *dp83640 = clock->chosen;
 	struct phy_device *phydev = dp83640->phydev;
 	u32 sec, nsec, pwidth;
-	u16 gpio, ptp_trig, trigger, val;
+	u16 gpio, ptp_trig, val;
 
 	if (on) {
-		gpio = 1 + ptp_find_pin(clock->ptp_clock, PTP_PF_PEROUT, 0);
+		gpio = 1 + ptp_find_pin(clock->ptp_clock, PTP_PF_PEROUT,
+					trigger);
 		if (gpio < 1)
 			return -EINVAL;
 	} else {
 		gpio = 0;
 	}
 
-	trigger = PER_TRIGGER;
-
 	ptp_trig = TRIG_WR |
 		(trigger & TRIG_CSEL_MASK) << TRIG_CSEL_SHIFT |
 		(gpio & TRIG_GPIO_MASK) << TRIG_GPIO_SHIFT |
@@ -353,6 +353,11 @@ static int periodic_output(struct dp83640_clock *clock,
 	ext_write(0, phydev, PAGE4, PTP_TDR, sec >> 16);       /* sec[31:16] */
 	ext_write(0, phydev, PAGE4, PTP_TDR, pwidth & 0xffff); /* ns[15:0] */
 	ext_write(0, phydev, PAGE4, PTP_TDR, pwidth >> 16);    /* ns[31:16] */
+	/* Triggers 0 and 1 has programmable pulsewidth2 */
+	if (trigger < 2) {
+		ext_write(0, phydev, PAGE4, PTP_TDR, pwidth & 0xffff);
+		ext_write(0, phydev, PAGE4, PTP_TDR, pwidth >> 16);
+	}
 
 	/*enable trigger*/
 	val &= ~TRIG_LOAD;
@@ -491,9 +496,9 @@ static int ptp_dp83640_enable(struct ptp_clock_info *ptp,
 		return 0;
 
 	case PTP_CLK_REQ_PEROUT:
-		if (rq->perout.index != 0)
+		if (rq->perout.index >= N_PER_OUT)
 			return -EINVAL;
-		return periodic_output(clock, rq, on);
+		return periodic_output(clock, rq, on, rq->perout.index);
 
 	default:
 		break;
@@ -505,6 +510,16 @@ static int ptp_dp83640_enable(struct ptp_clock_info *ptp,
 static int ptp_dp83640_verify(struct ptp_clock_info *ptp, unsigned int pin,
 			      enum ptp_pin_function func, unsigned int chan)
 {
+	struct dp83640_clock *clock =
+		container_of(ptp, struct dp83640_clock, caps);
+
+	if (clock->caps.pin_config[pin].func == PTP_PF_PHYSYNC &&
+	    !list_empty(&clock->phylist))
+		return 1;
+
+	if (func == PTP_PF_PHYSYNC)
+		return 1;
+
 	return 0;
 }
 
@@ -594,7 +609,11 @@ static void recalibrate(struct dp83640_clock *clock)
 	u16 cal_gpio, cfg0, evnt, ptp_trig, trigger, val;
 
 	trigger = CAL_TRIGGER;
-	cal_gpio = gpio_tab[CALIBRATE_GPIO];
+	cal_gpio = 1 + ptp_find_pin(clock->ptp_clock, PTP_PF_PHYSYNC, 0);
+	if (cal_gpio < 1) {
+		pr_err("PHY calibration pin not avaible - PHY is not calibrated.");
+		return;
+	}
 
 	mutex_lock(&clock->extreg_lock);
 
@@ -944,7 +963,7 @@ static void dp83640_clock_init(struct dp83640_clock *clock, struct mii_bus *bus)
 	clock->caps.max_adj	= 1953124;
 	clock->caps.n_alarm	= 0;
 	clock->caps.n_ext_ts	= N_EXT_TS;
-	clock->caps.n_per_out	= 1;
+	clock->caps.n_per_out	= N_PER_OUT;
 	clock->caps.n_pins	= DP83640_N_PINS;
 	clock->caps.pps		= 0;
 	clock->caps.adjfreq	= ptp_dp83640_adjfreq;

drivers/ptp/ptp_chardev.c

@@ -86,17 +86,12 @@ int ptp_set_pinfunc(struct ptp_clock *ptp, unsigned int pin,
 			return -EINVAL;
 		break;
 	case PTP_PF_PHYSYNC:
-		pr_err("sorry, cannot reassign the calibration pin\n");
-		return -EINVAL;
+		if (chan != 0)
+			return -EINVAL;
 	default:
 		return -EINVAL;
 	}
 
-	if (pin2->func == PTP_PF_PHYSYNC) {
-		pr_err("sorry, cannot reprogram the calibration pin\n");
-		return -EINVAL;
-	}
-
 	if (info->verify(info, pin, func, chan)) {
 		pr_err("driver cannot use function %u on pin %u\n", func, chan);
 		return -EOPNOTSUPP;