Merge tag 'omap-for-v5.0/fixes-rc4' of...

Merge tag 'omap-for-v5.0/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

SoC fixes for omaps for v5.0-rc cycle

This series contains two SoC regression fixes and one uninitialized
variable fix:

- Fix inverted nirq pin handling for omap5 that started producing
  warnings with earlier GIC direction checks and took a while to
  understand and confirm. Basically there are two sys_nirq pins
  that are bypassing peripheral modules and inverted automatically
  by the SoC and need to be handled with a custom irq_set_type()

- Recent ti-sysc changes caused a regression to the pwm-omap-dmtimer
  code where the device tree handling code for timer source clock
  gets confused. It looks like we can remove that code eventually,
  but for now we just drop a bogus pm_runtime_irq_safe() for the
  timers with the related quirks caused by pm_runtime_irq_safe(),
  and have the standard assigned-clocks and assigned-clock-parents
  deal with setting the source clock

- Fix potentially uninitialized value for display init code if
  regmap_read() fails

* tag 'omap-for-v5.0/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Variable "reg" in function omap4_dsi_mux_pads() could be uninitialized
  ARM: dts: Configure clock parent for pwm vibra
  bus: ti-sysc: Fix timer handling with drop pm_runtime_irq_safe()
  ARM: OMAP5+: Fix inverted nirq pin interrupts with irq_set_type
  clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting

arch/arm/boot/dts/omap4-droid4-xt894.dts

@@ -644,6 +644,17 @@ OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
 	};
 };
 
+/* Configure pwm clock source for timers 8 & 9 */
+&timer8 {
+	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_clkin_ck>;
+};
+
+&timer9 {
+	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_clkin_ck>;
+};
+
 /*
  * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
  * uart1 wakeirq.

arch/arm/boot/dts/omap5-board-common.dtsi

@@ -317,7 +317,8 @@ &usbhost_wkup_pins
 
 	palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
 		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */
+			/* sys_nirq1 is pulled down as the SoC is inverting it for GIC */
+			OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0)
 		>;
 	};
 
@@ -385,7 +386,8 @@ &i2c1 {
 
 	palmas: palmas@48 {
 		compatible = "ti,palmas";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
+		/* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x48>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
@@ -651,7 +653,8 @@ twl6040: twl@4b {
 		pinctrl-names = "default";
 		pinctrl-0 = <&twl6040_pins>;
 
-		interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
+		/* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_LOW>;
 
 		/* audpwron gpio defined in the board specific dts */
 

arch/arm/boot/dts/omap5-cm-t54.dts

@@ -181,6 +181,13 @@ ads7846_pins: pinmux_ads7846_pins {
 			OMAP5_IOPAD(0x0042, PIN_INPUT_PULLDOWN | MUX_MODE6)  /* llib_wakereqin.gpio1_wk15 */
 		>;
 	};
+
+	palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
+		pinctrl-single,pins = <
+			/* sys_nirq1 is pulled down as the SoC is inverting it for GIC */
+			OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
 };
 
 &omap5_pmx_core {
@@ -414,8 +421,11 @@ at24@50 {
 
 	palmas: palmas@48 {
 		compatible = "ti,palmas";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
 		reg = <0x48>;
+		pinctrl-0 = <&palmas_sys_nirq_pins>;
+		pinctrl-names = "default";
+		/* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		ti,system-power-controller;

arch/arm/mach-omap2/display.c

@@ -83,6 +83,7 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
 	u32 enable_mask, enable_shift;
 	u32 pipd_mask, pipd_shift;
 	u32 reg;
+	int ret;
 
 	if (dsi_id == 0) {
 		enable_mask = OMAP4_DSI1_LANEENABLE_MASK;
@@ -98,7 +99,11 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
 		return -ENODEV;
 	}
 
-	regmap_read(omap4_dsi_mux_syscon, OMAP4_DSIPHY_SYSCON_OFFSET, &reg);
+	ret = regmap_read(omap4_dsi_mux_syscon,
+					  OMAP4_DSIPHY_SYSCON_OFFSET,
+					  &reg);
+	if (ret)
+		return ret;
 
 	reg &= ~enable_mask;
 	reg &= ~pipd_mask;

arch/arm/mach-omap2/omap-wakeupgen.c

@@ -50,6 +50,9 @@
 #define OMAP4_NR_BANKS		4
 #define OMAP4_NR_IRQS		128
 
+#define SYS_NIRQ1_EXT_SYS_IRQ_1	7
+#define SYS_NIRQ2_EXT_SYS_IRQ_2	119
+
 static void __iomem *wakeupgen_base;
 static void __iomem *sar_base;
 static DEFINE_RAW_SPINLOCK(wakeupgen_lock);
@@ -153,6 +156,37 @@ static void wakeupgen_unmask(struct irq_data *d)
 	irq_chip_unmask_parent(d);
 }
 
+/*
+ * The sys_nirq pins bypass peripheral modules and are wired directly
+ * to MPUSS wakeupgen. They get automatically inverted for GIC.
+ */
+static int wakeupgen_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	bool inverted = false;
+
+	switch (type) {
+	case IRQ_TYPE_LEVEL_LOW:
+		type &= ~IRQ_TYPE_LEVEL_MASK;
+		type |= IRQ_TYPE_LEVEL_HIGH;
+		inverted = true;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		type &= ~IRQ_TYPE_EDGE_BOTH;
+		type |= IRQ_TYPE_EDGE_RISING;
+		inverted = true;
+		break;
+	default:
+		break;
+	}
+
+	if (inverted && d->hwirq != SYS_NIRQ1_EXT_SYS_IRQ_1 &&
+	    d->hwirq != SYS_NIRQ2_EXT_SYS_IRQ_2)
+		pr_warn("wakeupgen: irq%li polarity inverted in dts\n",
+			d->hwirq);
+
+	return irq_chip_set_type_parent(d, type);
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 static DEFINE_PER_CPU(u32 [MAX_NR_REG_BANKS], irqmasks);
 
@@ -446,7 +480,7 @@ static struct irq_chip wakeupgen_chip = {
 	.irq_mask		= wakeupgen_mask,
 	.irq_unmask		= wakeupgen_unmask,
 	.irq_retrigger		= irq_chip_retrigger_hierarchy,
-	.irq_set_type		= irq_chip_set_type_parent,
+	.irq_set_type		= wakeupgen_irq_set_type,
 	.flags			= IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND,
 #ifdef CONFIG_SMP
 	.irq_set_affinity	= irq_chip_set_affinity_parent,

drivers/bus/ti-sysc.c

@@ -781,12 +781,12 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 	SYSC_QUIRK("smartreflex", 0, -1, 0x38, -1, 0x00000000, 0xffffffff,
 		   SYSC_QUIRK_LEGACY_IDLE),
 	SYSC_QUIRK("timer", 0, 0, 0x10, 0x14, 0x00000015, 0xffffffff,
-		   SYSC_QUIRK_LEGACY_IDLE),
+		   0),
 	/* Some timers on omap4 and later */
 	SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x50002100, 0xffffffff,
-		   SYSC_QUIRK_LEGACY_IDLE),
+		   0),
 	SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x4fff1301, 0xffff00ff,
-		   SYSC_QUIRK_LEGACY_IDLE),
+		   0),
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff,
 		   SYSC_QUIRK_LEGACY_IDLE),
 	/* Uarts on omap4 and later */

drivers/clocksource/timer-ti-dm.c

@@ -154,6 +154,10 @@ static int omap_dm_timer_of_set_source(struct omap_dm_timer *timer)
 	if (IS_ERR(parent))
 		return -ENODEV;
 
+	/* Bail out if both clocks point to fck */
+	if (clk_is_match(parent, timer->fclk))
+		return 0;
+
 	ret = clk_set_parent(timer->fclk, parent);
 	if (ret < 0)
 		pr_err("%s: failed to set parent\n", __func__);
@@ -864,7 +868,6 @@ static int omap_dm_timer_probe(struct platform_device *pdev)
 	timer->pdev = pdev;
 
 	pm_runtime_enable(dev);
-	pm_runtime_irq_safe(dev);
 
 	if (!timer->reserved) {
 		ret = pm_runtime_get_sync(dev);