Commit 2f2632ff authored by Dave Airlie's avatar Dave Airlie

Merge tag 'drm-intel-fixes-2013-10-29' of...

Merge tag 'drm-intel-fixes-2013-10-29' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes

Regression and warn fixes for i915.

* tag 'drm-intel-fixes-2013-10-29' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: Fix the PPT fdi lane bifurcate state handling on ivb
  drm/i915: No LVDS hardware on Intel D410PT and D425KT
  drm/i915/dp: workaround BIOS eDP bpp clamping issue
  drm/i915: Add HSW CRT output readout support
  drm/i915: Add support for pipe_bpp readout
parents 7314e613 1fbc0d78
......@@ -83,8 +83,7 @@ static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
return true;
}
static void intel_crt_get_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
static unsigned int intel_crt_get_flags(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_crt *crt = intel_encoder_to_crt(encoder);
......@@ -102,7 +101,27 @@ static void intel_crt_get_config(struct intel_encoder *encoder,
else
flags |= DRM_MODE_FLAG_NVSYNC;
pipe_config->adjusted_mode.flags |= flags;
return flags;
}
static void intel_crt_get_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
{
struct drm_device *dev = encoder->base.dev;
pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder);
}
static void hsw_crt_get_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
{
intel_ddi_get_config(encoder, pipe_config);
pipe_config->adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC |
DRM_MODE_FLAG_NHSYNC |
DRM_MODE_FLAG_PVSYNC |
DRM_MODE_FLAG_NVSYNC);
pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder);
}
/* Note: The caller is required to filter out dpms modes not supported by the
......@@ -799,7 +818,10 @@ void intel_crt_init(struct drm_device *dev)
crt->base.mode_set = intel_crt_mode_set;
crt->base.disable = intel_disable_crt;
crt->base.enable = intel_enable_crt;
crt->base.get_config = intel_crt_get_config;
if (IS_HASWELL(dev))
crt->base.get_config = hsw_crt_get_config;
else
crt->base.get_config = intel_crt_get_config;
if (I915_HAS_HOTPLUG(dev))
crt->base.hpd_pin = HPD_CRT;
if (HAS_DDI(dev))
......
......@@ -1249,8 +1249,8 @@ static void intel_ddi_hot_plug(struct intel_encoder *intel_encoder)
intel_dp_check_link_status(intel_dp);
}
static void intel_ddi_get_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
void intel_ddi_get_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
......@@ -1268,6 +1268,23 @@ static void intel_ddi_get_config(struct intel_encoder *encoder,
flags |= DRM_MODE_FLAG_NVSYNC;
pipe_config->adjusted_mode.flags |= flags;
switch (temp & TRANS_DDI_BPC_MASK) {
case TRANS_DDI_BPC_6:
pipe_config->pipe_bpp = 18;
break;
case TRANS_DDI_BPC_8:
pipe_config->pipe_bpp = 24;
break;
case TRANS_DDI_BPC_10:
pipe_config->pipe_bpp = 30;
break;
case TRANS_DDI_BPC_12:
pipe_config->pipe_bpp = 36;
break;
default:
break;
}
}
static void intel_ddi_destroy(struct drm_encoder *encoder)
......
......@@ -2327,9 +2327,10 @@ static void intel_fdi_normal_train(struct drm_crtc *crtc)
FDI_FE_ERRC_ENABLE);
}
static bool pipe_has_enabled_pch(struct intel_crtc *intel_crtc)
static bool pipe_has_enabled_pch(struct intel_crtc *crtc)
{
return intel_crtc->base.enabled && intel_crtc->config.has_pch_encoder;
return crtc->base.enabled && crtc->active &&
crtc->config.has_pch_encoder;
}
static void ivb_modeset_global_resources(struct drm_device *dev)
......@@ -2979,6 +2980,48 @@ static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
I915_READ(VSYNCSHIFT(cpu_transcoder)));
}
static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t temp;
temp = I915_READ(SOUTH_CHICKEN1);
if (temp & FDI_BC_BIFURCATION_SELECT)
return;
WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
temp |= FDI_BC_BIFURCATION_SELECT;
DRM_DEBUG_KMS("enabling fdi C rx\n");
I915_WRITE(SOUTH_CHICKEN1, temp);
POSTING_READ(SOUTH_CHICKEN1);
}
static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
{
struct drm_device *dev = intel_crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
switch (intel_crtc->pipe) {
case PIPE_A:
break;
case PIPE_B:
if (intel_crtc->config.fdi_lanes > 2)
WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
else
cpt_enable_fdi_bc_bifurcation(dev);
break;
case PIPE_C:
cpt_enable_fdi_bc_bifurcation(dev);
break;
default:
BUG();
}
}
/*
* Enable PCH resources required for PCH ports:
* - PCH PLLs
......@@ -2997,6 +3040,9 @@ static void ironlake_pch_enable(struct drm_crtc *crtc)
assert_pch_transcoder_disabled(dev_priv, pipe);
if (IS_IVYBRIDGE(dev))
ivybridge_update_fdi_bc_bifurcation(intel_crtc);
/* Write the TU size bits before fdi link training, so that error
* detection works. */
I915_WRITE(FDI_RX_TUSIZE1(pipe),
......@@ -4983,6 +5029,22 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
if (!(tmp & PIPECONF_ENABLE))
return false;
if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
switch (tmp & PIPECONF_BPC_MASK) {
case PIPECONF_6BPC:
pipe_config->pipe_bpp = 18;
break;
case PIPECONF_8BPC:
pipe_config->pipe_bpp = 24;
break;
case PIPECONF_10BPC:
pipe_config->pipe_bpp = 30;
break;
default:
break;
}
}
intel_get_pipe_timings(crtc, pipe_config);
i9xx_get_pfit_config(crtc, pipe_config);
......@@ -5576,48 +5638,6 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc,
return true;
}
static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t temp;
temp = I915_READ(SOUTH_CHICKEN1);
if (temp & FDI_BC_BIFURCATION_SELECT)
return;
WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
temp |= FDI_BC_BIFURCATION_SELECT;
DRM_DEBUG_KMS("enabling fdi C rx\n");
I915_WRITE(SOUTH_CHICKEN1, temp);
POSTING_READ(SOUTH_CHICKEN1);
}
static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
{
struct drm_device *dev = intel_crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
switch (intel_crtc->pipe) {
case PIPE_A:
break;
case PIPE_B:
if (intel_crtc->config.fdi_lanes > 2)
WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
else
cpt_enable_fdi_bc_bifurcation(dev);
break;
case PIPE_C:
cpt_enable_fdi_bc_bifurcation(dev);
break;
default:
BUG();
}
}
int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
{
/*
......@@ -5811,9 +5831,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
&intel_crtc->config.fdi_m_n);
}
if (IS_IVYBRIDGE(dev))
ivybridge_update_fdi_bc_bifurcation(intel_crtc);
ironlake_set_pipeconf(crtc);
/* Set up the display plane register */
......@@ -5881,6 +5898,23 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
if (!(tmp & PIPECONF_ENABLE))
return false;
switch (tmp & PIPECONF_BPC_MASK) {
case PIPECONF_6BPC:
pipe_config->pipe_bpp = 18;
break;
case PIPECONF_8BPC:
pipe_config->pipe_bpp = 24;
break;
case PIPECONF_10BPC:
pipe_config->pipe_bpp = 30;
break;
case PIPECONF_12BPC:
pipe_config->pipe_bpp = 36;
break;
default:
break;
}
if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
struct intel_shared_dpll *pll;
......@@ -8612,6 +8646,9 @@ intel_pipe_config_compare(struct drm_device *dev,
PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
PIPE_CONF_CHECK_X(dpll_hw_state.fp1);
if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5)
PIPE_CONF_CHECK_I(pipe_bpp);
#undef PIPE_CONF_CHECK_X
#undef PIPE_CONF_CHECK_I
#undef PIPE_CONF_CHECK_FLAGS
......
......@@ -1401,6 +1401,26 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
else
pipe_config->port_clock = 270000;
}
if (is_edp(intel_dp) && dev_priv->vbt.edp_bpp &&
pipe_config->pipe_bpp > dev_priv->vbt.edp_bpp) {
/*
* This is a big fat ugly hack.
*
* Some machines in UEFI boot mode provide us a VBT that has 18
* bpp and 1.62 GHz link bandwidth for eDP, which for reasons
* unknown we fail to light up. Yet the same BIOS boots up with
* 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as
* max, not what it tells us to use.
*
* Note: This will still be broken if the eDP panel is not lit
* up by the BIOS, and thus we can't get the mode at module
* load.
*/
DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
pipe_config->pipe_bpp, dev_priv->vbt.edp_bpp);
dev_priv->vbt.edp_bpp = pipe_config->pipe_bpp;
}
}
static bool is_edp_psr(struct intel_dp *intel_dp)
......
......@@ -765,6 +765,8 @@ extern void intel_ddi_prepare_link_retrain(struct drm_encoder *encoder);
extern bool
intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector);
extern void intel_ddi_fdi_disable(struct drm_crtc *crtc);
extern void intel_ddi_get_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config);
extern void intel_display_handle_reset(struct drm_device *dev);
extern bool intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
......
......@@ -698,6 +698,22 @@ static const struct dmi_system_id intel_no_lvds[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Q900"),
},
},
{
.callback = intel_no_lvds_dmi_callback,
.ident = "Intel D410PT",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Intel"),
DMI_MATCH(DMI_BOARD_NAME, "D410PT"),
},
},
{
.callback = intel_no_lvds_dmi_callback,
.ident = "Intel D425KT",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Intel"),
DMI_EXACT_MATCH(DMI_BOARD_NAME, "D425KT"),
},
},
{
.callback = intel_no_lvds_dmi_callback,
.ident = "Intel D510MO",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment