Merge remote-tracking branch 'scott/next' into next

Highlights include corenet board file consolidation, the ability to run
userspaces with lwsync on e500v1/v2, some cleanup patches that other KVM
patches will build on, support for stripped-down e6500 emulation targets,
and some fixes of minor longstanding issues.

arch/powerpc/Kconfig

@@ -420,7 +420,7 @@ config FA_DUMP
 
 config IRQ_ALL_CPUS
 	bool "Distribute interrupts on all CPUs by default"
-	depends on SMP && !MV64360
+	depends on SMP
 	help
 	  This option gives the kernel permission to distribute IRQs across
 	  multiple CPUs.  Saying N here will route all IRQs to the first

arch/powerpc/boot/dts/b4860emu.dts

+/*
+ * B4860 emulator Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/dts-v1/;
+
+/include/ "fsl/e6500_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,B4860";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		dma0 = &dma0;
+		dma1 = &dma1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e6500@0 {
+			device_type = "cpu";
+			reg = <0 1>;
+			next-level-cache = <&L2>;
+		};
+		cpu1: PowerPC,e6500@2 {
+			device_type = "cpu";
+			reg = <2 3>;
+			next-level-cache = <&L2>;
+		};
+		cpu2: PowerPC,e6500@4 {
+			device_type = "cpu";
+			reg = <4 5>;
+			next-level-cache = <&L2>;
+		};
+		cpu3: PowerPC,e6500@6 {
+			device_type = "cpu";
+			reg = <6 7>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
+
+/ {
+	model = "fsl,B4860QDS";
+	compatible = "fsl,B4860EMU", "fsl,B4860QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <25 2 0 0>;
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 2>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 8>;
+	};
+
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 9>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,b4-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000>;
+		interrupts = <16 2 1 4>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,b4-corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 0>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 1>;
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <8 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+	};
+
+/include/ "fsl/qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,b4-device-config";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0";
+		reg = <0xe1000 0x1000>;
+	};
+
+/include/ "fsl/qoriq-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+	};
+
+/include/ "fsl/qoriq-dma-1.dtsi"
+	dma@101300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
+
+/include/ "fsl/qoriq-i2c-0.dtsi"
+/include/ "fsl/qoriq-i2c-1.dtsi"
+/include/ "fsl/qoriq-duart-0.dtsi"
+/include/ "fsl/qoriq-duart-1.dtsi"
+
+	L2: l2-cache-controller@c20000 {
+		compatible = "fsl,b4-l2-cache-controller";
+		reg = <0xc20000 0x1000>;
+		next-level-cache = <&cpc>;
+	};
+};

arch/powerpc/boot/dts/b4qds.dtsi

@@ -120,25 +120,38 @@ sdhc@114000 {
 		};
 
 		i2c@118000 {
-			eeprom@50 {
-				compatible = "at24,24c64";
-				reg = <0x50>;
-			};
-			eeprom@51 {
-				compatible = "at24,24c256";
-				reg = <0x51>;
-			};
-			eeprom@53 {
-				compatible = "at24,24c256";
-				reg = <0x53>;
-			};
-			eeprom@57 {
-				compatible = "at24,24c256";
-				reg = <0x57>;
-			};
-			rtc@68 {
-				compatible = "dallas,ds3232";
-				reg = <0x68>;
+			mux@77 {
+				compatible = "nxp,pca9547";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					eeprom@50 {
+						compatible = "at24,24c64";
+						reg = <0x50>;
+					};
+					eeprom@51 {
+						compatible = "at24,24c256";
+						reg = <0x51>;
+					};
+					eeprom@53 {
+						compatible = "at24,24c256";
+						reg = <0x53>;
+					};
+					eeprom@57 {
+						compatible = "at24,24c256";
+						reg = <0x57>;
+					};
+					rtc@68 {
+						compatible = "dallas,ds3232";
+						reg = <0x68>;
+					};
+				};
 			};
 		};
 

arch/powerpc/boot/dts/c293pcie.dts

@@ -45,6 +45,7 @@ memory {
 	ifc: ifc@fffe1e000 {
 		reg = <0xf 0xffe1e000 0 0x2000>;
 		ranges = <0x0 0x0 0xf 0xec000000 0x04000000
+			  0x1 0x0 0xf 0xff800000 0x00010000
 			  0x2 0x0 0xf 0xffdf0000 0x00010000>;
 
 	};

arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi

@@ -34,6 +34,8 @@
 
 /dts-v1/;
 
+/include/ "e6500_power_isa.dtsi"
+
 / {
 	compatible = "fsl,B4420";
 	#address-cells = <2>;

arch/powerpc/boot/dts/fsl/b4860si-post.dtsi

@@ -41,7 +41,7 @@ &pci0 {
 
 &rio {
 	compatible = "fsl,srio";
-	interrupts = <16 2 1 11>;
+	interrupts = <16 2 1 20>;
 	#address-cells = <2>;
 	#size-cells = <2>;
 	fsl,iommu-parent = <&pamu0>;

arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi

@@ -34,6 +34,8 @@
 
 /dts-v1/;
 
+/include/ "e6500_power_isa.dtsi"
+
 / {
 	compatible = "fsl,B4860";
 	#address-cells = <2>;

arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi

@@ -130,7 +130,7 @@ usb@22000 {
 
 /include/ "pq3-esdhc-0.dtsi"
 	sdhc@2e000 {
-		fsl,sdhci-auto-cmd12;
+		sdhci,auto-cmd12;
 		interrupts = <41 0x2 0 0>;
 	};
 

arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi

@@ -33,6 +33,9 @@
  */
 
 /dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
 / {
 	compatible = "fsl,BSC9131";
 	#address-cells = <2>;

arch/powerpc/boot/dts/t4240emu.dts

+/*
+ * T4240 emulator Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "fsl/e6500_power_isa.dtsi"
+/ {
+	compatible = "fsl,T4240";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		dma0 = &dma0;
+		dma1 = &dma1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e6500@0 {
+			device_type = "cpu";
+			reg = <0 1>;
+			next-level-cache = <&L2_1>;
+		};
+		cpu1: PowerPC,e6500@2 {
+			device_type = "cpu";
+			reg = <2 3>;
+			next-level-cache = <&L2_1>;
+		};
+		cpu2: PowerPC,e6500@4 {
+			device_type = "cpu";
+			reg = <4 5>;
+			next-level-cache = <&L2_1>;
+		};
+		cpu3: PowerPC,e6500@6 {
+			device_type = "cpu";
+			reg = <6 7>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu4: PowerPC,e6500@8 {
+			device_type = "cpu";
+			reg = <8 9>;
+			next-level-cache = <&L2_2>;
+		};
+		cpu5: PowerPC,e6500@10 {
+			device_type = "cpu";
+			reg = <10 11>;
+			next-level-cache = <&L2_2>;
+		};
+		cpu6: PowerPC,e6500@12 {
+			device_type = "cpu";
+			reg = <12 13>;
+			next-level-cache = <&L2_2>;
+		};
+		cpu7: PowerPC,e6500@14 {
+			device_type = "cpu";
+			reg = <14 15>;
+			next-level-cache = <&L2_2>;
+		};
+
+		cpu8: PowerPC,e6500@16 {
+			device_type = "cpu";
+			reg = <16 17>;
+			next-level-cache = <&L2_3>;
+		};
+		cpu9: PowerPC,e6500@18 {
+			device_type = "cpu";
+			reg = <18 19>;
+			next-level-cache = <&L2_3>;
+		};
+		cpu10: PowerPC,e6500@20 {
+			device_type = "cpu";
+			reg = <20 21>;
+			next-level-cache = <&L2_3>;
+		};
+		cpu11: PowerPC,e6500@22 {
+			device_type = "cpu";
+			reg = <22 23>;
+			next-level-cache = <&L2_3>;
+		};
+	};
+};
+
+/ {
+	model = "fsl,T4240QDS";
+	compatible = "fsl,T4240EMU", "fsl,T4240QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <25 2 0 0>;
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.7",
+				"fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.7",
+				"fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 22>;
+	};
+
+	ddr3: memory-controller@a000 {
+		compatible = "fsl,qoriq-memory-controller-v4.7",
+				"fsl,qoriq-memory-controller";
+		reg = <0xa000 0x1000>;
+		interrupts = <16 2 1 21>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,t4240-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000
+		       0x12000 0x1000>;
+		interrupts = <16 2 1 27
+			      16 2 1 26
+			      16 2 1 25>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x6000>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+	};
+
+/include/ "fsl/qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,t4240-device-config", "fsl,qoriq-device-config-2.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
+		reg = <0xe1000 0x1000>;
+	};
+
+/include/ "fsl/qoriq-dma-0.dtsi"
+/include/ "fsl/qoriq-dma-1.dtsi"
+
+/include/ "fsl/qoriq-i2c-0.dtsi"
+/include/ "fsl/qoriq-i2c-1.dtsi"
+/include/ "fsl/qoriq-duart-0.dtsi"
+/include/ "fsl/qoriq-duart-1.dtsi"
+
+	L2_1: l2-cache-controller@c20000 {
+		compatible = "fsl,t4240-l2-cache-controller";
+		reg = <0xc20000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+	L2_2: l2-cache-controller@c60000 {
+		compatible = "fsl,t4240-l2-cache-controller";
+		reg = <0xc60000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+	L2_3: l2-cache-controller@ca0000 {
+		compatible = "fsl,t4240-l2-cache-controller";
+		reg = <0xca0000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+};

arch/powerpc/boot/dts/t4240qds.dts

@@ -118,36 +118,53 @@ flash@0 {
 		};
 
 		i2c@118000 {
-			eeprom@51 {
-				compatible = "at24,24c256";
-				reg = <0x51>;
-			};
-			eeprom@52 {
-				compatible = "at24,24c256";
-				reg = <0x52>;
-			};
-			eeprom@53 {
-				compatible = "at24,24c256";
-				reg = <0x53>;
-			};
-			eeprom@54 {
-				compatible = "at24,24c256";
-				reg = <0x54>;
-			};
-			eeprom@55 {
-				compatible = "at24,24c256";
-				reg = <0x55>;
-			};
-			eeprom@56 {
-				compatible = "at24,24c256";
-				reg = <0x56>;
-			};
-			rtc@68 {
-				compatible = "dallas,ds3232";
-				reg = <0x68>;
-				interrupts = <0x1 0x1 0 0>;
+			mux@77 {
+				compatible = "nxp,pca9547";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					eeprom@51 {
+						compatible = "at24,24c256";
+						reg = <0x51>;
+					};
+					eeprom@52 {
+						compatible = "at24,24c256";
+						reg = <0x52>;
+					};
+					eeprom@53 {
+						compatible = "at24,24c256";
+						reg = <0x53>;
+					};
+					eeprom@54 {
+						compatible = "at24,24c256";
+						reg = <0x54>;
+					};
+					eeprom@55 {
+						compatible = "at24,24c256";
+						reg = <0x55>;
+					};
+					eeprom@56 {
+						compatible = "at24,24c256";
+						reg = <0x56>;
+					};
+					rtc@68 {
+						compatible = "dallas,ds3232";
+						reg = <0x68>;
+						interrupts = <0x1 0x1 0 0>;
+					};
+				};
 			};
 		};
+
+		sdhc@114000 {
+			voltage-ranges = <1800 1800 3300 3300>;
+		};
 	};
 
 	pci0: pcie@ffe240000 {

arch/powerpc/configs/corenet32_smp_defconfig

@@ -23,11 +23,7 @@ CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
-CONFIG_P2041_RDB=y
-CONFIG_P3041_DS=y
-CONFIG_P4080_DS=y
-CONFIG_P5020_DS=y
-CONFIG_P5040_DS=y
+CONFIG_CORENET_GENERIC=y
 CONFIG_HIGHMEM=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m
@@ -104,6 +100,7 @@ CONFIG_FSL_PQ_MDIO=y
 CONFIG_E1000=y
 CONFIG_E1000E=y
 CONFIG_VITESSE_PHY=y
+CONFIG_AT803X_PHY=y
 CONFIG_FIXED_PHY=y
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set

arch/powerpc/configs/corenet64_smp_defconfig

@@ -21,10 +21,7 @@ CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
-CONFIG_B4_QDS=y
-CONFIG_P5020_DS=y
-CONFIG_P5040_DS=y
-CONFIG_T4240_QDS=y
+CONFIG_CORENET_GENERIC=y
 # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y

arch/powerpc/configs/mpc85xx_defconfig

@@ -138,6 +138,7 @@ CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
+CONFIG_AT803X_PHY=y
 CONFIG_FIXED_PHY=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set

arch/powerpc/configs/mpc85xx_smp_defconfig

@@ -138,6 +138,7 @@ CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
+CONFIG_AT803X_PHY=y
 CONFIG_FIXED_PHY=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set

arch/powerpc/configs/ppc64e_defconfig

@@ -23,7 +23,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
 CONFIG_EFI_PARTITION=y
-CONFIG_P5020_DS=y
+CONFIG_CORENET_GENERIC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y

arch/powerpc/configs/ppc6xx_defconfig

@@ -71,7 +71,7 @@ CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 CONFIG_PPC_BESTCOMM=y
 CONFIG_GPIO_MPC8XXX=y
-CONFIG_MCU_MPC8349EMITX=m
+CONFIG_MCU_MPC8349EMITX=y
 CONFIG_HIGHMEM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y

arch/powerpc/include/asm/emulated_ops.h

@@ -43,6 +43,7 @@ extern struct ppc_emulated {
 	struct ppc_emulated_entry popcntb;
 	struct ppc_emulated_entry spe;
 	struct ppc_emulated_entry string;
+	struct ppc_emulated_entry sync;
 	struct ppc_emulated_entry unaligned;
 #ifdef CONFIG_MATH_EMULATION
 	struct ppc_emulated_entry math;

arch/powerpc/include/asm/ppc-opcode.h

@@ -143,6 +143,8 @@
 #define PPC_INST_LSWX			0x7c00042a
 #define PPC_INST_LWARX			0x7c000028
 #define PPC_INST_LWSYNC			0x7c2004ac
+#define PPC_INST_SYNC			0x7c0004ac
+#define PPC_INST_SYNC_MASK		0xfc0007fe
 #define PPC_INST_LXVD2X			0x7c000698
 #define PPC_INST_MCRXR			0x7c000400
 #define PPC_INST_MCRXR_MASK		0xfc0007fe

arch/powerpc/include/asm/processor.h

@@ -167,21 +167,7 @@ struct thread_vr_state {
 	vector128	vscr __attribute__((aligned(16)));
 };
 
-struct thread_struct {
-	unsigned long	ksp;		/* Kernel stack pointer */
-#ifdef CONFIG_PPC64
-	unsigned long	ksp_vsid;
-#endif
-	struct pt_regs	*regs;		/* Pointer to saved register state */
-	mm_segment_t	fs;		/* for get_fs() validation */
-#ifdef CONFIG_BOOKE
-	/* BookE base exception scratch space; align on cacheline */
-	unsigned long	normsave[8] ____cacheline_aligned;
-#endif
-#ifdef CONFIG_PPC32
-	void		*pgdir;		/* root of page-table tree */
-	unsigned long	ksp_limit;	/* if ksp <= ksp_limit stack overflow */
-#endif
+struct debug_reg {
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
 	/*
 	 * The following help to manage the use of Debug Control Registers
@@ -218,6 +204,24 @@ struct thread_struct {
 	unsigned long	dvc2;
 #endif
 #endif
+};
+
+struct thread_struct {
+	unsigned long	ksp;		/* Kernel stack pointer */
+#ifdef CONFIG_PPC64
+	unsigned long	ksp_vsid;
+#endif
+	struct pt_regs	*regs;		/* Pointer to saved register state */
+	mm_segment_t	fs;		/* for get_fs() validation */
+#ifdef CONFIG_BOOKE
+	/* BookE base exception scratch space; align on cacheline */
+	unsigned long	normsave[8] ____cacheline_aligned;
+#endif
+#ifdef CONFIG_PPC32
+	void		*pgdir;		/* root of page-table tree */
+	unsigned long	ksp_limit;	/* if ksp <= ksp_limit stack overflow */
+#endif
+	struct debug_reg debug;
 	struct thread_fp_state	fp_state;
 	struct thread_fp_state	*fp_save_area;
 	int		fpexc_mode;	/* floating-point exception mode */

arch/powerpc/include/asm/reg_booke.h

@@ -381,7 +381,7 @@
 #define DBCR0_IA34T	0x00004000	/* Instr Addr 3-4 range Toggle */
 #define DBCR0_FT	0x00000001	/* Freeze Timers on debug event */
 
-#define dbcr_iac_range(task)	((task)->thread.dbcr0)
+#define dbcr_iac_range(task)	((task)->thread.debug.dbcr0)
 #define DBCR_IAC12I	DBCR0_IA12			/* Range Inclusive */
 #define DBCR_IAC12X	(DBCR0_IA12 | DBCR0_IA12X)	/* Range Exclusive */
 #define DBCR_IAC12MODE	(DBCR0_IA12 | DBCR0_IA12X)	/* IAC 1-2 Mode Bits */
@@ -395,7 +395,7 @@
 #define DBCR1_DAC1W	0x20000000	/* DAC1 Write Debug Event */
 #define DBCR1_DAC2W	0x10000000	/* DAC2 Write Debug Event */
 
-#define dbcr_dac(task)	((task)->thread.dbcr1)
+#define dbcr_dac(task)	((task)->thread.debug.dbcr1)
 #define DBCR_DAC1R	DBCR1_DAC1R
 #define DBCR_DAC1W	DBCR1_DAC1W
 #define DBCR_DAC2R	DBCR1_DAC2R
@@ -441,7 +441,7 @@
 #define DBCR0_CRET	0x00000020	/* Critical Return Debug Event */
 #define DBCR0_FT	0x00000001	/* Freeze Timers on debug event */
 
-#define dbcr_dac(task)	((task)->thread.dbcr0)
+#define dbcr_dac(task)	((task)->thread.debug.dbcr0)
 #define DBCR_DAC1R	DBCR0_DAC1R
 #define DBCR_DAC1W	DBCR0_DAC1W
 #define DBCR_DAC2R	DBCR0_DAC2R
@@ -475,7 +475,7 @@
 #define DBCR1_IAC34MX	0x000000C0	/* Instr Addr 3-4 range eXclusive */
 #define DBCR1_IAC34AT	0x00000001	/* Instr Addr 3-4 range Toggle */
 
-#define dbcr_iac_range(task)	((task)->thread.dbcr1)
+#define dbcr_iac_range(task)	((task)->thread.debug.dbcr1)
 #define DBCR_IAC12I	DBCR1_IAC12M	/* Range Inclusive */
 #define DBCR_IAC12X	DBCR1_IAC12MX	/* Range Exclusive */
 #define DBCR_IAC12MODE	DBCR1_IAC12MX	/* IAC 1-2 Mode Bits */

arch/powerpc/include/asm/switch_to.h

@@ -35,6 +35,7 @@ extern void giveup_vsx(struct task_struct *);
 extern void enable_kernel_spe(void);
 extern void giveup_spe(struct task_struct *);
 extern void load_up_spe(struct task_struct *);
+extern void switch_booke_debug_regs(struct thread_struct *new_thread);
 
 #ifndef CONFIG_SMP
 extern void discard_lazy_cpu_state(void);

arch/powerpc/kernel/asm-offsets.c

@@ -115,7 +115,7 @@ int main(void)
 #endif /* CONFIG_SPE */
 #endif /* CONFIG_PPC64 */
 #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0));
+	DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, debug.dbcr0));
 #endif
 #ifdef CONFIG_KVM_BOOK3S_32_HANDLER
 	DEFINE(THREAD_KVM_SVCPU, offsetof(struct thread_struct, kvm_shadow_vcpu));

arch/powerpc/kernel/exceptions-64e.S

@@ -399,7 +399,7 @@ interrupt_end_book3e:
 
 /* Altivec Unavailable Interrupt */
 	START_EXCEPTION(altivec_unavailable);
-	NORMAL_EXCEPTION_PROLOG(0x200, BOOKE_INTERRUPT_ALTIVEC_UNAVAIL,
+	NORMAL_EXCEPTION_PROLOG(0x200, BOOKE_INTERRUPT_SPE_ALTIVEC_UNAVAIL,
 				PROLOG_ADDITION_NONE)
 	/* we can probably do a shorter exception entry for that one... */
 	EXCEPTION_COMMON(0x200, PACA_EXGEN, INTS_KEEP)
@@ -421,7 +421,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 
 /* AltiVec Assist */
 	START_EXCEPTION(altivec_assist);
-	NORMAL_EXCEPTION_PROLOG(0x220, BOOKE_INTERRUPT_ALTIVEC_ASSIST,
+	NORMAL_EXCEPTION_PROLOG(0x220,
+				BOOKE_INTERRUPT_SPE_FP_DATA_ALTIVEC_ASSIST,
 				PROLOG_ADDITION_NONE)
 	EXCEPTION_COMMON(0x220, PACA_EXGEN, INTS_DISABLE)
 	bl	.save_nvgprs

arch/powerpc/kernel/head_8xx.S

@@ -858,6 +858,9 @@ initial_mmu:
 	addis	r11, r11, 0x0080	/* Add 8M */
 	mtspr	SPRN_MD_RPN, r11
 
+	addi	r10, r10, 0x0100
+	mtspr	SPRN_MD_CTR, r10
+
 	addis	r8, r8, 0x0080		/* Add 8M */
 	mtspr	SPRN_MD_EPN, r8
 	mtspr	SPRN_MD_TWC, r9

arch/powerpc/kernel/head_fsl_booke.S

@@ -555,27 +555,27 @@ END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
 #ifdef CONFIG_SPE
 	/* SPE Unavailable */
 	START_EXCEPTION(SPEUnavailable)
-	NORMAL_EXCEPTION_PROLOG(SPE_UNAVAIL)
+	NORMAL_EXCEPTION_PROLOG(SPE_ALTIVEC_UNAVAIL)
 	beq	1f
 	bl	load_up_spe
 	b	fast_exception_return
 1:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	EXC_XFER_EE_LITE(0x2010, KernelSPE)
 #else
-	EXCEPTION(0x2020, SPE_UNAVAIL, SPEUnavailable, \
+	EXCEPTION(0x2020, SPE_ALTIVEC_UNAVAIL, SPEUnavailable, \
 		  unknown_exception, EXC_XFER_EE)
 #endif /* CONFIG_SPE */
 
 	/* SPE Floating Point Data */
 #ifdef CONFIG_SPE
-	EXCEPTION(0x2030, SPE_FP_DATA, SPEFloatingPointData, \
-		  SPEFloatingPointException, EXC_XFER_EE);
+	EXCEPTION(0x2030, SPE_FP_DATA_ALTIVEC_ASSIST, SPEFloatingPointData,
+		  SPEFloatingPointException, EXC_XFER_EE)
 
 	/* SPE Floating Point Round */
 	EXCEPTION(0x2050, SPE_FP_ROUND, SPEFloatingPointRound, \
 		  SPEFloatingPointRoundException, EXC_XFER_EE)
 #else
-	EXCEPTION(0x2040, SPE_FP_DATA, SPEFloatingPointData, \
+	EXCEPTION(0x2040, SPE_FP_DATA_ALTIVEC_ASSIST, SPEFloatingPointData,
 		  unknown_exception, EXC_XFER_EE)
 	EXCEPTION(0x2050, SPE_FP_ROUND, SPEFloatingPointRound, \
 		  unknown_exception, EXC_XFER_EE)

arch/powerpc/kernel/kgdb.c

@@ -151,15 +151,16 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs)
 	return 1;
 }
 
+static DEFINE_PER_CPU(struct thread_info, kgdb_thread_info);
 static int kgdb_singlestep(struct pt_regs *regs)
 {
 	struct thread_info *thread_info, *exception_thread_info;
-	struct thread_info *backup_current_thread_info;
+	struct thread_info *backup_current_thread_info =
+		&__get_cpu_var(kgdb_thread_info);
 
 	if (user_mode(regs))
 		return 0;
 
-	backup_current_thread_info = kmalloc(sizeof(struct thread_info), GFP_KERNEL);
 	/*
 	 * On Book E and perhaps other processors, singlestep is handled on
 	 * the critical exception stack.  This causes current_thread_info()
@@ -185,7 +186,6 @@ static int kgdb_singlestep(struct pt_regs *regs)
 		/* Restore current_thread_info lastly. */
 		memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info);
 
-	kfree(backup_current_thread_info);
 	return 1;
 }
 

arch/powerpc/kernel/process.c

@@ -314,28 +314,28 @@ static DEFINE_PER_CPU(struct arch_hw_breakpoint, current_brk);
  */
 static void set_debug_reg_defaults(struct thread_struct *thread)
 {
-	thread->iac1 = thread->iac2 = 0;
+	thread->debug.iac1 = thread->debug.iac2 = 0;
 #if CONFIG_PPC_ADV_DEBUG_IACS > 2
-	thread->iac3 = thread->iac4 = 0;
+	thread->debug.iac3 = thread->debug.iac4 = 0;
 #endif
-	thread->dac1 = thread->dac2 = 0;
+	thread->debug.dac1 = thread->debug.dac2 = 0;
 #if CONFIG_PPC_ADV_DEBUG_DVCS > 0
-	thread->dvc1 = thread->dvc2 = 0;
+	thread->debug.dvc1 = thread->debug.dvc2 = 0;
 #endif
-	thread->dbcr0 = 0;
+	thread->debug.dbcr0 = 0;
 #ifdef CONFIG_BOOKE
 	/*
 	 * Force User/Supervisor bits to b11 (user-only MSR[PR]=1)
 	 */
-	thread->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US |	\
+	thread->debug.dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US |
 			DBCR1_IAC3US | DBCR1_IAC4US;
 	/*
 	 * Force Data Address Compare User/Supervisor bits to be User-only
 	 * (0b11 MSR[PR]=1) and set all other bits in DBCR2 register to be 0.
 	 */
-	thread->dbcr2 = DBCR2_DAC1US | DBCR2_DAC2US;
+	thread->debug.dbcr2 = DBCR2_DAC1US | DBCR2_DAC2US;
 #else
-	thread->dbcr1 = 0;
+	thread->debug.dbcr1 = 0;
 #endif
 }
 
@@ -348,22 +348,22 @@ static void prime_debug_regs(struct thread_struct *thread)
 	 */
 	mtmsr(mfmsr() & ~MSR_DE);
 
-	mtspr(SPRN_IAC1, thread->iac1);
-	mtspr(SPRN_IAC2, thread->iac2);
+	mtspr(SPRN_IAC1, thread->debug.iac1);
+	mtspr(SPRN_IAC2, thread->debug.iac2);
 #if CONFIG_PPC_ADV_DEBUG_IACS > 2
-	mtspr(SPRN_IAC3, thread->iac3);
-	mtspr(SPRN_IAC4, thread->iac4);
+	mtspr(SPRN_IAC3, thread->debug.iac3);
+	mtspr(SPRN_IAC4, thread->debug.iac4);
 #endif
-	mtspr(SPRN_DAC1, thread->dac1);
-	mtspr(SPRN_DAC2, thread->dac2);
+	mtspr(SPRN_DAC1, thread->debug.dac1);
+	mtspr(SPRN_DAC2, thread->debug.dac2);
 #if CONFIG_PPC_ADV_DEBUG_DVCS > 0
-	mtspr(SPRN_DVC1, thread->dvc1);
-	mtspr(SPRN_DVC2, thread->dvc2);
+	mtspr(SPRN_DVC1, thread->debug.dvc1);
+	mtspr(SPRN_DVC2, thread->debug.dvc2);
 #endif
-	mtspr(SPRN_DBCR0, thread->dbcr0);
-	mtspr(SPRN_DBCR1, thread->dbcr1);
+	mtspr(SPRN_DBCR0, thread->debug.dbcr0);
+	mtspr(SPRN_DBCR1, thread->debug.dbcr1);
 #ifdef CONFIG_BOOKE
-	mtspr(SPRN_DBCR2, thread->dbcr2);
+	mtspr(SPRN_DBCR2, thread->debug.dbcr2);
 #endif
 }
 /*
@@ -371,12 +371,13 @@ static void prime_debug_regs(struct thread_struct *thread)
  * debug registers, set the debug registers from the values
  * stored in the new thread.
  */
-static void switch_booke_debug_regs(struct thread_struct *new_thread)
+void switch_booke_debug_regs(struct thread_struct *new_thread)
 {
-	if ((current->thread.dbcr0 & DBCR0_IDM)
-		|| (new_thread->dbcr0 & DBCR0_IDM))
+	if ((current->thread.debug.dbcr0 & DBCR0_IDM)
+		|| (new_thread->debug.dbcr0 & DBCR0_IDM))
 			prime_debug_regs(new_thread);
 }
+EXPORT_SYMBOL_GPL(switch_booke_debug_regs);
 #else	/* !CONFIG_PPC_ADV_DEBUG_REGS */
 #ifndef CONFIG_HAVE_HW_BREAKPOINT
 static void set_debug_reg_defaults(struct thread_struct *thread)

arch/powerpc/kernel/ptrace32.c

@@ -266,7 +266,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 		if (addr > 0)
 			break;
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
-		ret = put_user(child->thread.dac1, (u32 __user *)data);
+		ret = put_user(child->thread.debug.dac1, (u32 __user *)data);
 #else
 		dabr_fake = (
 			(child->thread.hw_brk.address & (~HW_BRK_TYPE_DABR)) |

arch/powerpc/kernel/signal_32.c

@@ -1312,7 +1312,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx,
 	unsigned char tmp;
 	unsigned long new_msr = regs->msr;
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
-	unsigned long new_dbcr0 = current->thread.dbcr0;
+	unsigned long new_dbcr0 = current->thread.debug.dbcr0;
 #endif
 
 	for (i=0; i<ndbg; i++) {
@@ -1327,7 +1327,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx,
 			} else {
 				new_dbcr0 &= ~DBCR0_IC;
 				if (!DBCR_ACTIVE_EVENTS(new_dbcr0,
-						current->thread.dbcr1)) {
+						current->thread.debug.dbcr1)) {
 					new_msr &= ~MSR_DE;
 					new_dbcr0 &= ~DBCR0_IDM;
 				}
@@ -1362,7 +1362,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx,
 	   the user is really doing something wrong. */
 	regs->msr = new_msr;
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
-	current->thread.dbcr0 = new_dbcr0;
+	current->thread.debug.dbcr0 = new_dbcr0;
 #endif
 
 	if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx))

arch/powerpc/kernel/traps.c

@@ -351,8 +351,8 @@ static inline int check_io_access(struct pt_regs *regs)
 #define REASON_TRAP		ESR_PTR
 
 /* single-step stuff */
-#define single_stepping(regs)	(current->thread.dbcr0 & DBCR0_IC)
-#define clear_single_step(regs)	(current->thread.dbcr0 &= ~DBCR0_IC)
+#define single_stepping(regs)	(current->thread.debug.dbcr0 & DBCR0_IC)
+#define clear_single_step(regs)	(current->thread.debug.dbcr0 &= ~DBCR0_IC)
 
 #else
 /* On non-4xx, the reason for the machine check or program
@@ -1018,6 +1018,13 @@ static int emulate_instruction(struct pt_regs *regs)
 		return emulate_isel(regs, instword);
 	}
 
+	/* Emulate sync instruction variants */
+	if ((instword & PPC_INST_SYNC_MASK) == PPC_INST_SYNC) {
+		PPC_WARN_EMULATED(sync, regs);
+		asm volatile("sync");
+		return 0;
+	}
+
 #ifdef CONFIG_PPC64
 	/* Emulate the mfspr rD, DSCR. */
 	if ((((instword & PPC_INST_MFSPR_DSCR_USER_MASK) ==
@@ -1461,7 +1468,8 @@ void SoftwareEmulation(struct pt_regs *regs)
 
 	if (!user_mode(regs)) {
 		debugger(regs);
-		die("Kernel Mode Software FPU Emulation", regs, SIGFPE);
+		die("Kernel Mode Unimplemented Instruction or SW FPU Emulation",
+			regs, SIGFPE);
 	}
 
 	if (!emulate_math(regs))
@@ -1482,7 +1490,7 @@ static void handle_debug(struct pt_regs *regs, unsigned long debug_status)
 	if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) {
 		dbcr_dac(current) &= ~(DBCR_DAC1R | DBCR_DAC1W);
 #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE
-		current->thread.dbcr2 &= ~DBCR2_DAC12MODE;
+		current->thread.debug.dbcr2 &= ~DBCR2_DAC12MODE;
 #endif
 		do_send_trap(regs, mfspr(SPRN_DAC1), debug_status, TRAP_HWBKPT,
 			     5);
@@ -1493,24 +1501,24 @@ static void handle_debug(struct pt_regs *regs, unsigned long debug_status)
 			     6);
 		changed |= 0x01;
 	}  else if (debug_status & DBSR_IAC1) {
-		current->thread.dbcr0 &= ~DBCR0_IAC1;
+		current->thread.debug.dbcr0 &= ~DBCR0_IAC1;
 		dbcr_iac_range(current) &= ~DBCR_IAC12MODE;
 		do_send_trap(regs, mfspr(SPRN_IAC1), debug_status, TRAP_HWBKPT,
 			     1);
 		changed |= 0x01;
 	}  else if (debug_status & DBSR_IAC2) {
-		current->thread.dbcr0 &= ~DBCR0_IAC2;
+		current->thread.debug.dbcr0 &= ~DBCR0_IAC2;
 		do_send_trap(regs, mfspr(SPRN_IAC2), debug_status, TRAP_HWBKPT,
 			     2);
 		changed |= 0x01;
 	}  else if (debug_status & DBSR_IAC3) {
-		current->thread.dbcr0 &= ~DBCR0_IAC3;
+		current->thread.debug.dbcr0 &= ~DBCR0_IAC3;
 		dbcr_iac_range(current) &= ~DBCR_IAC34MODE;
 		do_send_trap(regs, mfspr(SPRN_IAC3), debug_status, TRAP_HWBKPT,
 			     3);
 		changed |= 0x01;
 	}  else if (debug_status & DBSR_IAC4) {
-		current->thread.dbcr0 &= ~DBCR0_IAC4;
+		current->thread.debug.dbcr0 &= ~DBCR0_IAC4;
 		do_send_trap(regs, mfspr(SPRN_IAC4), debug_status, TRAP_HWBKPT,
 			     4);
 		changed |= 0x01;
@@ -1520,19 +1528,20 @@ static void handle_debug(struct pt_regs *regs, unsigned long debug_status)
 	 * Check all other debug flags and see if that bit needs to be turned
 	 * back on or not.
 	 */
-	if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0, current->thread.dbcr1))
+	if (DBCR_ACTIVE_EVENTS(current->thread.debug.dbcr0,
+	    current->thread.debug.dbcr1))
 		regs->msr |= MSR_DE;
 	else
 		/* Make sure the IDM flag is off */
-		current->thread.dbcr0 &= ~DBCR0_IDM;
+		current->thread.debug.dbcr0 &= ~DBCR0_IDM;
 
 	if (changed & 0x01)
-		mtspr(SPRN_DBCR0, current->thread.dbcr0);
+		mtspr(SPRN_DBCR0, current->thread.debug.dbcr0);
 }
 
 void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 {
-	current->thread.dbsr = debug_status;
+	current->thread.debug.dbsr = debug_status;
 
 	/* Hack alert: On BookE, Branch Taken stops on the branch itself, while
 	 * on server, it stops on the target of the branch. In order to simulate
@@ -1549,8 +1558,8 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 
 		/* Do the single step trick only when coming from userspace */
 		if (user_mode(regs)) {
-			current->thread.dbcr0 &= ~DBCR0_BT;
-			current->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC;
+			current->thread.debug.dbcr0 &= ~DBCR0_BT;
+			current->thread.debug.dbcr0 |= DBCR0_IDM | DBCR0_IC;
 			regs->msr |= MSR_DE;
 			return;
 		}
@@ -1578,13 +1587,13 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 			return;
 
 		if (user_mode(regs)) {
-			current->thread.dbcr0 &= ~DBCR0_IC;
-			if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0,
-					       current->thread.dbcr1))
+			current->thread.debug.dbcr0 &= ~DBCR0_IC;
+			if (DBCR_ACTIVE_EVENTS(current->thread.debug.dbcr0,
+					       current->thread.debug.dbcr1))
 				regs->msr |= MSR_DE;
 			else
 				/* Make sure the IDM bit is off */
-				current->thread.dbcr0 &= ~DBCR0_IDM;
+				current->thread.debug.dbcr0 &= ~DBCR0_IDM;
 		}
 
 		_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
@@ -1811,6 +1820,7 @@ struct ppc_emulated ppc_emulated = {
 	WARN_EMULATED_SETUP(popcntb),
 	WARN_EMULATED_SETUP(spe),
 	WARN_EMULATED_SETUP(string),
+	WARN_EMULATED_SETUP(sync),
 	WARN_EMULATED_SETUP(unaligned),
 #ifdef CONFIG_MATH_EMULATION
 	WARN_EMULATED_SETUP(math),

arch/powerpc/mm/init_32.c

@@ -213,7 +213,12 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 	 */
 	BUG_ON(first_memblock_base != 0);
 
+#ifdef CONFIG_PIN_TLB
+	/* 8xx can only access 24MB at the moment */
+	memblock_set_current_limit(min_t(u64, first_memblock_size, 0x01800000));
+#else
 	/* 8xx can only access 8MB at the moment */
 	memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000));
+#endif
 }
 #endif /* CONFIG_8xx */

arch/powerpc/mm/pgtable.c

@@ -32,8 +32,6 @@
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
 
-#include "mmu_decl.h"
-
 static inline int is_exec_fault(void)
 {
 	return current->thread.regs && TRAP(current->thread.regs) == 0x400;
@@ -72,7 +70,7 @@ struct page * maybe_pte_to_page(pte_t pte)
  * support falls into the same category.
  */
 
-static pte_t set_pte_filter(pte_t pte, unsigned long addr)
+static pte_t set_pte_filter(pte_t pte)
 {
 	pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
 	if (pte_looks_normal(pte) && !(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) ||
@@ -81,17 +79,6 @@ static pte_t set_pte_filter(pte_t pte, unsigned long addr)
 		if (!pg)
 			return pte;
 		if (!test_bit(PG_arch_1, &pg->flags)) {
-#ifdef CONFIG_8xx
-			/* On 8xx, cache control instructions (particularly
-			 * "dcbst" from flush_dcache_icache) fault as write
-			 * operation if there is an unpopulated TLB entry
-			 * for the address in question. To workaround that,
-			 * we invalidate the TLB here, thus avoiding dcbst
-			 * misbehaviour.
-			 */
-			/* 8xx doesn't care about PID, size or ind args */
-			_tlbil_va(addr, 0, 0, 0);
-#endif /* CONFIG_8xx */
 			flush_dcache_icache_page(pg);
 			set_bit(PG_arch_1, &pg->flags);
 		}
@@ -111,7 +98,7 @@ static pte_t set_access_flags_filter(pte_t pte, struct vm_area_struct *vma,
  * as we don't have two bits to spare for _PAGE_EXEC and _PAGE_HWEXEC so
  * instead we "filter out" the exec permission for non clean pages.
  */
-static pte_t set_pte_filter(pte_t pte, unsigned long addr)
+static pte_t set_pte_filter(pte_t pte)
 {
 	struct page *pg;
 
@@ -193,7 +180,7 @@ void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
 	 * this context might not have been activated yet when this
 	 * is called.
 	 */
-	pte = set_pte_filter(pte, addr);
+	pte = set_pte_filter(pte);
 
 	/* Perform the setting of the PTE */
 	__set_pte_at(mm, addr, ptep, pte, 0);

arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c

@@ -204,7 +204,6 @@ static int mcu_remove(struct i2c_client *client)
 	ret = mcu_gpiochip_remove(mcu);
 	if (ret)
 		return ret;
-	i2c_set_clientdata(client, NULL);
 	kfree(mcu);
 	return 0;
 }

arch/powerpc/platforms/85xx/Kconfig

@@ -218,83 +218,16 @@ config GE_IMP3A
 	  This board is a 3U CompactPCI Single Board Computer with a Freescale
 	  P2020 processor.
 
-config P2041_RDB
-	bool "Freescale P2041 RDB"
-	select DEFAULT_UIMAGE
-	select PPC_E500MC
-	select PHYS_64BIT
-	select SWIOTLB
-	select ARCH_REQUIRE_GPIOLIB
-	select GPIO_MPC8XXX
-	select HAS_RAPIDIO
-	select PPC_EPAPR_HV_PIC
-	help
-	  This option enables support for the P2041 RDB board
-
-config P3041_DS
-	bool "Freescale P3041 DS"
-	select DEFAULT_UIMAGE
-	select PPC_E500MC
-	select PHYS_64BIT
-	select SWIOTLB
-	select ARCH_REQUIRE_GPIOLIB
-	select GPIO_MPC8XXX
-	select HAS_RAPIDIO
-	select PPC_EPAPR_HV_PIC
-	help
-	  This option enables support for the P3041 DS board
-
-config P4080_DS
-	bool "Freescale P4080 DS"
-	select DEFAULT_UIMAGE
-	select PPC_E500MC
-	select PHYS_64BIT
-	select SWIOTLB
-	select ARCH_REQUIRE_GPIOLIB
-	select GPIO_MPC8XXX
-	select HAS_RAPIDIO
-	select PPC_EPAPR_HV_PIC
-	help
-	  This option enables support for the P4080 DS board
-
 config SGY_CTS1000
 	tristate "Servergy CTS-1000 support"
 	select GPIOLIB
 	select OF_GPIO
-	depends on P4080_DS
+	depends on CORENET_GENERIC
 	help
 	  Enable this to support functionality in Servergy's CTS-1000 systems.
 
 endif # PPC32
 
-config P5020_DS
-	bool "Freescale P5020 DS"
-	select DEFAULT_UIMAGE
-	select E500
-	select PPC_E500MC
-	select PHYS_64BIT
-	select SWIOTLB
-	select ARCH_REQUIRE_GPIOLIB
-	select GPIO_MPC8XXX
-	select HAS_RAPIDIO
-	select PPC_EPAPR_HV_PIC
-	help
-	  This option enables support for the P5020 DS board
-
-config P5040_DS
-	bool "Freescale P5040 DS"
-	select DEFAULT_UIMAGE
-	select E500
-	select PPC_E500MC
-	select PHYS_64BIT
-	select SWIOTLB
-	select ARCH_REQUIRE_GPIOLIB
-	select GPIO_MPC8XXX
-	select HAS_RAPIDIO
-	select PPC_EPAPR_HV_PIC
-	help
-	  This option enables support for the P5040 DS board
-
 config PPC_QEMU_E500
 	bool "QEMU generic e500 platform"
 	select DEFAULT_UIMAGE
@@ -310,10 +243,8 @@ config PPC_QEMU_E500
 	  unset based on the emulated CPU (or actual host CPU in the case
 	  of KVM).
 
-if PPC64
-
-config T4240_QDS
-	bool "Freescale T4240 QDS"
+config CORENET_GENERIC
+	bool "Freescale CoreNet Generic"
 	select DEFAULT_UIMAGE
 	select E500
 	select PPC_E500MC
@@ -324,26 +255,14 @@ config T4240_QDS
 	select HAS_RAPIDIO
 	select PPC_EPAPR_HV_PIC
 	help
-	  This option enables support for the T4240 QDS board
-
-config B4_QDS
-	bool "Freescale B4 QDS"
-	select DEFAULT_UIMAGE
-	select E500
-	select PPC_E500MC
-	select PHYS_64BIT
-	select SWIOTLB
-	select GPIOLIB
-	select ARCH_REQUIRE_GPIOLIB
-	select HAS_RAPIDIO
-	select PPC_EPAPR_HV_PIC
-	help
-	  This option enables support for the B4 QDS board
-	  The B4 application development system B4 QDS is a complete
-	  debugging environment intended for engineers developing
-	  applications for the B4.
+	  This option enables support for the FSL CoreNet based boards.
+	  For 32bit kernel, the following boards are supported:
+	    P2041 RDB, P3041 DS and P4080 DS
+	  For 64bit kernel, the following boards are supported:
+	    T4240 QDS and B4 QDS
+	  The following boards are supported for both 32bit and 64bit kernel:
+	    P5020 DS and P5040 DS
 
-endif
 endif # FSL_SOC_BOOKE
 
 config TQM85xx

arch/powerpc/platforms/85xx/Makefile

@@ -18,13 +18,7 @@ obj-$(CONFIG_P1010_RDB)   += p1010rdb.o
 obj-$(CONFIG_P1022_DS)    += p1022_ds.o
 obj-$(CONFIG_P1022_RDK)   += p1022_rdk.o
 obj-$(CONFIG_P1023_RDS)   += p1023_rds.o
-obj-$(CONFIG_P2041_RDB)   += p2041_rdb.o corenet_ds.o
-obj-$(CONFIG_P3041_DS)    += p3041_ds.o corenet_ds.o
-obj-$(CONFIG_P4080_DS)    += p4080_ds.o corenet_ds.o
-obj-$(CONFIG_P5020_DS)    += p5020_ds.o corenet_ds.o
-obj-$(CONFIG_P5040_DS)    += p5040_ds.o corenet_ds.o
-obj-$(CONFIG_T4240_QDS)   += t4240_qds.o corenet_ds.o
-obj-$(CONFIG_B4_QDS)	  += b4_qds.o corenet_ds.o
+obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
 obj-$(CONFIG_SBC8548)     += sbc8548.o

arch/powerpc/platforms/85xx/b4_qds.c

-/*
- * B4 QDS Setup
- * Should apply for QDS platform of B4860 and it's personalities.
- * viz B4860/B4420/B4220QDS
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/phy.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-
-#include <linux/of_platform.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <asm/ehv_pic.h>
-
-#include "corenet_ds.h"
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init b4_qds_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
-	extern struct smp_ops_t smp_85xx_ops;
-#endif
-
-	if ((of_flat_dt_is_compatible(root, "fsl,B4860QDS")) ||
-		(of_flat_dt_is_compatible(root, "fsl,B4420QDS")) ||
-			(of_flat_dt_is_compatible(root, "fsl,B4220QDS")))
-		return 1;
-
-	/* Check if we're running under the Freescale hypervisor */
-	if ((of_flat_dt_is_compatible(root, "fsl,B4860QDS-hv")) ||
-		(of_flat_dt_is_compatible(root, "fsl,B4420QDS-hv")) ||
-			(of_flat_dt_is_compatible(root, "fsl,B4220QDS-hv"))) {
-		ppc_md.init_IRQ = ehv_pic_init;
-		ppc_md.get_irq = ehv_pic_get_irq;
-		ppc_md.restart = fsl_hv_restart;
-		ppc_md.power_off = fsl_hv_halt;
-		ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
-		/*
-		 * Disable the timebase sync operations because we can't write
-		 * to the timebase registers under the hypervisor.
-		  */
-		smp_85xx_ops.give_timebase = NULL;
-		smp_85xx_ops.take_timebase = NULL;
-#endif
-		return 1;
-	}
-
-	return 0;
-}
-
-define_machine(b4_qds) {
-	.name			= "B4 QDS",
-	.probe			= b4_qds_probe,
-	.setup_arch		= corenet_ds_setup_arch,
-	.init_IRQ		= corenet_ds_pic_init,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-#endif
-/* coreint doesn't play nice with lazy EE, use legacy mpic for now */
-#ifdef CONFIG_PPC64
-	.get_irq		= mpic_get_irq,
-#else
-	.get_irq		= mpic_get_coreint_irq,
-#endif
-	.restart		= fsl_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-#ifdef CONFIG_PPC64
-	.power_save		= book3e_idle,
-#else
-	.power_save		= e500_idle,
-#endif
-};
-
-machine_arch_initcall(b4_qds, corenet_ds_publish_devices);
-
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(b4_qds, swiotlb_setup_bus_notifier);
-#endif

arch/powerpc/platforms/85xx/corenet_ds.h

-/*
- * Corenet based SoC DS Setup
- *
- * Copyright 2009 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef CORENET_DS_H
-#define CORENET_DS_H
-
-extern void __init corenet_ds_pic_init(void);
-extern void __init corenet_ds_setup_arch(void);
-extern int __init corenet_ds_publish_devices(void);
-
-#endif

arch/powerpc/platforms/85xx/corenet_ds.c → arch/powerpc/platforms/85xx/corenet_generic.c

@@ -25,13 +25,14 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/mpic.h>
+#include <asm/ehv_pic.h>
 
 #include <linux/of_platform.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include "smp.h"
 
-void __init corenet_ds_pic_init(void)
+void __init corenet_gen_pic_init(void)
 {
 	struct mpic *mpic;
 	unsigned int flags = MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU |
@@ -49,7 +50,7 @@ void __init corenet_ds_pic_init(void)
 /*
  * Setup the architecture
  */
-void __init corenet_ds_setup_arch(void)
+void __init corenet_gen_setup_arch(void)
 {
 	mpc85xx_smp_init();
 
@@ -90,7 +91,92 @@ static const struct of_device_id of_device_ids[] = {
 	{}
 };
 
-int __init corenet_ds_publish_devices(void)
+int __init corenet_gen_publish_devices(void)
 {
 	return of_platform_bus_probe(NULL, of_device_ids, NULL);
 }
+
+static const char * const boards[] __initconst = {
+	"fsl,P2041RDB",
+	"fsl,P3041DS",
+	"fsl,P4080DS",
+	"fsl,P5020DS",
+	"fsl,P5040DS",
+	"fsl,T4240QDS",
+	"fsl,B4860QDS",
+	"fsl,B4420QDS",
+	"fsl,B4220QDS",
+	NULL
+};
+
+static const char * const hv_boards[] __initconst = {
+	"fsl,P2041RDB-hv",
+	"fsl,P3041DS-hv",
+	"fsl,P4080DS-hv",
+	"fsl,P5020DS-hv",
+	"fsl,P5040DS-hv",
+	"fsl,T4240QDS-hv",
+	"fsl,B4860QDS-hv",
+	"fsl,B4420QDS-hv",
+	"fsl,B4220QDS-hv",
+	NULL
+};
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init corenet_generic_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+#ifdef CONFIG_SMP
+	extern struct smp_ops_t smp_85xx_ops;
+#endif
+
+	if (of_flat_dt_match(root, boards))
+		return 1;
+
+	/* Check if we're running under the Freescale hypervisor */
+	if (of_flat_dt_match(root, hv_boards)) {
+		ppc_md.init_IRQ = ehv_pic_init;
+		ppc_md.get_irq = ehv_pic_get_irq;
+		ppc_md.restart = fsl_hv_restart;
+		ppc_md.power_off = fsl_hv_halt;
+		ppc_md.halt = fsl_hv_halt;
+#ifdef CONFIG_SMP
+		/*
+		 * Disable the timebase sync operations because we can't write
+		 * to the timebase registers under the hypervisor.
+		  */
+		smp_85xx_ops.give_timebase = NULL;
+		smp_85xx_ops.take_timebase = NULL;
+#endif
+		return 1;
+	}
+
+	return 0;
+}
+
+define_machine(corenet_generic) {
+	.name			= "CoreNet Generic",
+	.probe			= corenet_generic_probe,
+	.setup_arch		= corenet_gen_setup_arch,
+	.init_IRQ		= corenet_gen_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_coreint_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+#ifdef CONFIG_PPC64
+	.power_save		= book3e_idle,
+#else
+	.power_save		= e500_idle,
+#endif
+};
+
+machine_arch_initcall(corenet_generic, corenet_gen_publish_devices);
+
+#ifdef CONFIG_SWIOTLB
+machine_arch_initcall(corenet_generic, swiotlb_setup_bus_notifier);
+#endif

arch/powerpc/platforms/85xx/p1010rdb.c

@@ -66,6 +66,8 @@ static int __init p1010_rdb_probe(void)
 
 	if (of_flat_dt_is_compatible(root, "fsl,P1010RDB"))
 		return 1;
+	if (of_flat_dt_is_compatible(root, "fsl,P1010RDB-PB"))
+		return 1;
 	return 0;
 }
 

arch/powerpc/platforms/85xx/p2041_rdb.c

-/*
- * P2041 RDB Setup
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/phy.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-
-#include <linux/of_platform.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <asm/ehv_pic.h>
-
-#include "corenet_ds.h"
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init p2041_rdb_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
-	extern struct smp_ops_t smp_85xx_ops;
-#endif
-
-	if (of_flat_dt_is_compatible(root, "fsl,P2041RDB"))
-		return 1;
-
-	/* Check if we're running under the Freescale hypervisor */
-	if (of_flat_dt_is_compatible(root, "fsl,P2041RDB-hv")) {
-		ppc_md.init_IRQ = ehv_pic_init;
-		ppc_md.get_irq = ehv_pic_get_irq;
-		ppc_md.restart = fsl_hv_restart;
-		ppc_md.power_off = fsl_hv_halt;
-		ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
-		/*
-		 * Disable the timebase sync operations because we can't write
-		 * to the timebase registers under the hypervisor.
-		  */
-		smp_85xx_ops.give_timebase = NULL;
-		smp_85xx_ops.take_timebase = NULL;
-#endif
-		return 1;
-	}
-
-	return 0;
-}
-
-define_machine(p2041_rdb) {
-	.name			= "P2041 RDB",
-	.probe			= p2041_rdb_probe,
-	.setup_arch		= corenet_ds_setup_arch,
-	.init_IRQ		= corenet_ds_pic_init,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-#endif
-	.get_irq		= mpic_get_coreint_irq,
-	.restart		= fsl_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-	.power_save		= e500_idle,
-};
-
-machine_arch_initcall(p2041_rdb, corenet_ds_publish_devices);
-
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(p2041_rdb, swiotlb_setup_bus_notifier);
-#endif

arch/powerpc/platforms/85xx/p3041_ds.c

-/*
- * P3041 DS Setup
- *
- * Maintained by Kumar Gala (see MAINTAINERS for contact information)
- *
- * Copyright 2009-2010 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/phy.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-
-#include <linux/of_platform.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <asm/ehv_pic.h>
-
-#include "corenet_ds.h"
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init p3041_ds_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
-	extern struct smp_ops_t smp_85xx_ops;
-#endif
-
-	if (of_flat_dt_is_compatible(root, "fsl,P3041DS"))
-		return 1;
-
-	/* Check if we're running under the Freescale hypervisor */
-	if (of_flat_dt_is_compatible(root, "fsl,P3041DS-hv")) {
-		ppc_md.init_IRQ = ehv_pic_init;
-		ppc_md.get_irq = ehv_pic_get_irq;
-		ppc_md.restart = fsl_hv_restart;
-		ppc_md.power_off = fsl_hv_halt;
-		ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
-		/*
-		 * Disable the timebase sync operations because we can't write
-		 * to the timebase registers under the hypervisor.
-		  */
-		smp_85xx_ops.give_timebase = NULL;
-		smp_85xx_ops.take_timebase = NULL;
-#endif
-		return 1;
-	}
-
-	return 0;
-}
-
-define_machine(p3041_ds) {
-	.name			= "P3041 DS",
-	.probe			= p3041_ds_probe,
-	.setup_arch		= corenet_ds_setup_arch,
-	.init_IRQ		= corenet_ds_pic_init,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-#endif
-	.get_irq		= mpic_get_coreint_irq,
-	.restart		= fsl_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-	.power_save		= e500_idle,
-};
-
-machine_arch_initcall(p3041_ds, corenet_ds_publish_devices);
-
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(p3041_ds, swiotlb_setup_bus_notifier);
-#endif

arch/powerpc/platforms/85xx/p4080_ds.c

-/*
- * P4080 DS Setup
- *
- * Maintained by Kumar Gala (see MAINTAINERS for contact information)
- *
- * Copyright 2009 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-
-#include <linux/of_platform.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <asm/ehv_pic.h>
-
-#include "corenet_ds.h"
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init p4080_ds_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
-	extern struct smp_ops_t smp_85xx_ops;
-#endif
-
-	if (of_flat_dt_is_compatible(root, "fsl,P4080DS"))
-		return 1;
-
-	/* Check if we're running under the Freescale hypervisor */
-	if (of_flat_dt_is_compatible(root, "fsl,P4080DS-hv")) {
-		ppc_md.init_IRQ = ehv_pic_init;
-		ppc_md.get_irq = ehv_pic_get_irq;
-		ppc_md.restart = fsl_hv_restart;
-		ppc_md.power_off = fsl_hv_halt;
-		ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
-		/*
-		 * Disable the timebase sync operations because we can't write
-		 * to the timebase registers under the hypervisor.
-		  */
-		smp_85xx_ops.give_timebase = NULL;
-		smp_85xx_ops.take_timebase = NULL;
-#endif
-		return 1;
-	}
-
-	return 0;
-}
-
-define_machine(p4080_ds) {
-	.name			= "P4080 DS",
-	.probe			= p4080_ds_probe,
-	.setup_arch		= corenet_ds_setup_arch,
-	.init_IRQ		= corenet_ds_pic_init,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-#endif
-	.get_irq		= mpic_get_coreint_irq,
-	.restart		= fsl_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-	.power_save		= e500_idle,
-};
-
-machine_arch_initcall(p4080_ds, corenet_ds_publish_devices);
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(p4080_ds, swiotlb_setup_bus_notifier);
-#endif

arch/powerpc/platforms/85xx/p5020_ds.c

-/*
- * P5020 DS Setup
- *
- * Maintained by Kumar Gala (see MAINTAINERS for contact information)
- *
- * Copyright 2009-2010 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/phy.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-
-#include <linux/of_platform.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <asm/ehv_pic.h>
-
-#include "corenet_ds.h"
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init p5020_ds_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
-	extern struct smp_ops_t smp_85xx_ops;
-#endif
-
-	if (of_flat_dt_is_compatible(root, "fsl,P5020DS"))
-		return 1;
-
-	/* Check if we're running under the Freescale hypervisor */
-	if (of_flat_dt_is_compatible(root, "fsl,P5020DS-hv")) {
-		ppc_md.init_IRQ = ehv_pic_init;
-		ppc_md.get_irq = ehv_pic_get_irq;
-		ppc_md.restart = fsl_hv_restart;
-		ppc_md.power_off = fsl_hv_halt;
-		ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
-		/*
-		 * Disable the timebase sync operations because we can't write
-		 * to the timebase registers under the hypervisor.
-		  */
-		smp_85xx_ops.give_timebase = NULL;
-		smp_85xx_ops.take_timebase = NULL;
-#endif
-		return 1;
-	}
-
-	return 0;
-}
-
-define_machine(p5020_ds) {
-	.name			= "P5020 DS",
-	.probe			= p5020_ds_probe,
-	.setup_arch		= corenet_ds_setup_arch,
-	.init_IRQ		= corenet_ds_pic_init,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-#endif
-	.get_irq		= mpic_get_coreint_irq,
-	.restart		= fsl_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-#ifdef CONFIG_PPC64
-	.power_save		= book3e_idle,
-#else
-	.power_save		= e500_idle,
-#endif
-};
-
-machine_arch_initcall(p5020_ds, corenet_ds_publish_devices);
-
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(p5020_ds, swiotlb_setup_bus_notifier);
-#endif

arch/powerpc/platforms/85xx/p5040_ds.c

-/*
- * P5040 DS Setup
- *
- * Copyright 2009-2010 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-
-#include <asm/machdep.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-
-#include <linux/of_fdt.h>
-
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <asm/ehv_pic.h>
-
-#include "corenet_ds.h"
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init p5040_ds_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
-	extern struct smp_ops_t smp_85xx_ops;
-#endif
-
-	if (of_flat_dt_is_compatible(root, "fsl,P5040DS"))
-		return 1;
-
-	/* Check if we're running under the Freescale hypervisor */
-	if (of_flat_dt_is_compatible(root, "fsl,P5040DS-hv")) {
-		ppc_md.init_IRQ = ehv_pic_init;
-		ppc_md.get_irq = ehv_pic_get_irq;
-		ppc_md.restart = fsl_hv_restart;
-		ppc_md.power_off = fsl_hv_halt;
-		ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
-		/*
-		 * Disable the timebase sync operations because we can't write
-		 * to the timebase registers under the hypervisor.
-		  */
-		smp_85xx_ops.give_timebase = NULL;
-		smp_85xx_ops.take_timebase = NULL;
-#endif
-		return 1;
-	}
-
-	return 0;
-}
-
-define_machine(p5040_ds) {
-	.name			= "P5040 DS",
-	.probe			= p5040_ds_probe,
-	.setup_arch		= corenet_ds_setup_arch,
-	.init_IRQ		= corenet_ds_pic_init,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-#endif
-	.get_irq		= mpic_get_coreint_irq,
-	.restart		= fsl_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-#ifdef CONFIG_PPC64
-	.power_save		= book3e_idle,
-#else
-	.power_save		= e500_idle,
-#endif
-};
-
-machine_arch_initcall(p5040_ds, corenet_ds_publish_devices);
-
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(p5040_ds, swiotlb_setup_bus_notifier);
-#endif

arch/powerpc/platforms/85xx/t4240_qds.c

-/*
- * T4240 QDS Setup
- *
- * Maintained by Kumar Gala (see MAINTAINERS for contact information)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/phy.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-
-#include <linux/of_platform.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <asm/ehv_pic.h>
-
-#include "corenet_ds.h"
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init t4240_qds_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
-	extern struct smp_ops_t smp_85xx_ops;
-#endif
-
-	if (of_flat_dt_is_compatible(root, "fsl,T4240QDS"))
-		return 1;
-
-	/* Check if we're running under the Freescale hypervisor */
-	if (of_flat_dt_is_compatible(root, "fsl,T4240QDS-hv")) {
-		ppc_md.init_IRQ = ehv_pic_init;
-		ppc_md.get_irq = ehv_pic_get_irq;
-		ppc_md.restart = fsl_hv_restart;
-		ppc_md.power_off = fsl_hv_halt;
-		ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
-		/*
-		 * Disable the timebase sync operations because we can't write
-		 * to the timebase registers under the hypervisor.
-		  */
-		smp_85xx_ops.give_timebase = NULL;
-		smp_85xx_ops.take_timebase = NULL;
-#endif
-		return 1;
-	}
-
-	return 0;
-}
-
-define_machine(t4240_qds) {
-	.name			= "T4240 QDS",
-	.probe			= t4240_qds_probe,
-	.setup_arch		= corenet_ds_setup_arch,
-	.init_IRQ		= corenet_ds_pic_init,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-#endif
-	.get_irq		= mpic_get_coreint_irq,
-	.restart		= fsl_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-#ifdef CONFIG_PPC64
-	.power_save		= book3e_idle,
-#else
-	.power_save		= e500_idle,
-#endif
-};
-
-machine_arch_initcall(t4240_qds, corenet_ds_publish_devices);
-
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(t4240_qds, swiotlb_setup_bus_notifier);
-#endif

arch/powerpc/platforms/embedded6xx/hlwd-pic.c

@@ -181,6 +181,7 @@ struct irq_domain *hlwd_pic_init(struct device_node *np)
 					   &hlwd_irq_domain_ops, io_base);
 	if (!irq_domain) {
 		pr_err("failed to allocate irq_domain\n");
+		iounmap(io_base);
 		return NULL;
 	}
 

arch/powerpc/sysdev/fsl_pci.c

@@ -40,7 +40,7 @@
 
 static int fsl_pcie_bus_fixup, is_mpc83xx_pci;
 
-static void quirk_fsl_pcie_header(struct pci_dev *dev)
+static void quirk_fsl_pcie_early(struct pci_dev *dev)
 {
 	u8 hdr_type;
 
@@ -562,7 +562,8 @@ int __init fsl_add_bridge(struct platform_device *pdev, int is_primary)
 }
 #endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */
 
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID,
+			quirk_fsl_pcie_early);
 
 #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
 struct mpc83xx_pcie_priv {

arch/powerpc/sysdev/mv64x60_dev.c

@@ -228,7 +228,7 @@ static struct platform_device * __init mv64x60_eth_register_shared_pdev(
 
 	if (id == 0) {
 		pdev = platform_device_register_simple("orion-mdio", -1, &r[1], 1);
-		if (!pdev)
+		if (IS_ERR(pdev))
 			return pdev;
 	}