Skip to content

L
linux
Commit 2f84411d authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge tag 'mvebu-dt-usb-phy-3.19-3' of git://git.infradead.org/linux-mvebu into next/dt2 

Pull "mvebu DT changes for v3.19 (round 3)" from Jason Cooper:

 - Armada 375
    - Add PHY and USB cluster controller support

* tag 'mvebu-dt-usb-phy-3.19-3' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: add PHY support to the dts for the USB controllers on Armada 375
  ARM: mvebu: add Device Tree description of USB cluster controller on Armada 375
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents b6072143 623394de
Hide whitespace changes
Inline Side-by-side
Showing with 1080 additions and 256 deletions
arch/arm/boot/dts/Makefile
View file @ 2f84411d
......@@ -506,7 +506,8 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
armada-370-mirabox.dtb \
armada-370-netgear-rn102.dtb \
armada-370-netgear-rn104.dtb \
armada-370-rd.dtb
armada-370-rd.dtb \
armada-370-synology-ds213j.dtb
dtb-$(CONFIG_MACH_ARMADA_375) += \
armada-375-db.dtb
dtb-$(CONFIG_MACH_ARMADA_38X) += \
......@@ -519,7 +520,8 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \
armada-xp-lenovo-ix4-300d.dtb \
armada-xp-matrix.dtb \
armada-xp-netgear-rn2120.dtb \
armada-xp-openblocks-ax3-4.dtb
armada-xp-openblocks-ax3-4.dtb \
armada-xp-synology-ds414.dtb
dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
dove-cubox.dtb \
dove-cubox-es.dtb \
......
arch/arm/boot/dts/armada-370-db.dts
View file @ 2f84411d
......@@ -75,6 +75,7 @@ i2c@11000 {
clock-frequency = <100000>;
status = "okay";
audio_codec: audio-codec@4a {
#sound-dai-cells = <0>;
compatible = "cirrus,cs42l51";
reg = <0x4a>;
};
......@@ -102,30 +103,6 @@ mvsdio@d4000 {
broken-cd;
};
pinctrl {
/*
* These pins might be muxed as I2S by
* the bootloader, but it conflicts
* with the real I2S pins that are
* muxed using i2s_pins. We must mux
* those pins to a function other than
* I2S.
*/
pinctrl-0 = <&hog_pins1 &hog_pins2>;
pinctrl-names = "default";
hog_pins1: hog-pins1 {
marvell,pins = "mpp6", "mpp8", "mpp10",
"mpp12", "mpp13";
marvell,function = "gpio";
};
hog_pins2: hog-pins2 {
marvell,pins = "mpp5", "mpp7", "mpp9";
marvell,function = "gpo";
};
};
usb@50000 {
status = "okay";
};
......@@ -135,6 +112,8 @@ usb@51000 {
};
spi0: spi@10600 {
pinctrl-0 = <&spi0_pins2>;
pinctrl-names = "default";
status = "okay";
spi-flash@0 {
......@@ -167,17 +146,84 @@ pcie@2,0 {
};
sound {
compatible = "marvell,a370db-audio";
marvell,audio-controller = <&audio_controller>;
marvell,audio-codec = <&audio_codec &spdif_out &spdif_in>;
status = "okay";
compatible = "simple-audio-card";
simple-audio-card,name = "Armada 370 DB Audio";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,widgets =
"Headphone", "Out Jack",
"Line", "In Jack";
simple-audio-card,routing =
"Out Jack", "HPL",
"Out Jack", "HPR",
"AIN1L", "In Jack",
"AIN1L", "In Jack";
status = "okay";
simple-audio-card,dai-link@0 {
format = "i2s";
cpu {
sound-dai = <&audio_controller 0>;
};
codec {
sound-dai = <&audio_codec>;
};
};
simple-audio-card,dai-link@1 {
format = "i2s";
cpu {
sound-dai = <&audio_controller 1>;
};
codec {
sound-dai = <&spdif_out>;
};
};
simple-audio-card,dai-link@2 {
format = "i2s";
cpu {
sound-dai = <&audio_controller 1>;
};
codec {
sound-dai = <&spdif_in>;
};
};
};
spdif_out: spdif-out {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
};
spdif_in: spdif-in {
compatible = "linux,spdif-dir";
#sound-dai-cells = <0>;
compatible = "linux,spdif-dir";
};
};
&pinctrl {
/*
* These pins might be muxed as I2S by
* the bootloader, but it conflicts
* with the real I2S pins that are
* muxed using i2s_pins. We must mux
* those pins to a function other than
* I2S.
*/
pinctrl-0 = <&hog_pins1 &hog_pins2>;
pinctrl-names = "default";
hog_pins1: hog-pins1 {
marvell,pins = "mpp6", "mpp8", "mpp10",
"mpp12", "mpp13";
marvell,function = "gpio";
};
hog_pins2: hog-pins2 {
marvell,pins = "mpp5", "mpp7", "mpp9";
marvell,function = "gpo";
};
};
arch/arm/boot/dts/armada-370-mirabox.dts
View file @ 2f84411d
......@@ -54,18 +54,6 @@ timer@20300 {
status = "okay";
};
pinctrl {
pwr_led_pin: pwr-led-pin {
marvell,pins = "mpp63";
marvell,function = "gpo";
};
stat_led_pins: stat-led-pins {
marvell,pins = "mpp64", "mpp65";
marvell,function = "gpio";
};
};
gpio_leds {
compatible = "gpio-leds";
pinctrl-names = "default";
......@@ -169,3 +157,16 @@ partition@800000 {
};
};
};
&pinctrl {
pwr_led_pin: pwr-led-pin {
marvell,pins = "mpp63";
marvell,function = "gpo";
};
stat_led_pins: stat-led-pins {
marvell,pins = "mpp64", "mpp65";
marvell,function = "gpio";
};
};
arch/arm/boot/dts/armada-370-netgear-rn102.dts
View file @ 2f84411d
......@@ -59,48 +59,6 @@ sata@a0000 {
status = "okay";
};
pinctrl {
power_led_pin: power-led-pin {
marvell,pins = "mpp57";
marvell,function = "gpio";
};
sata1_led_pin: sata1-led-pin {
marvell,pins = "mpp15";
marvell,function = "gpio";
};
sata2_led_pin: sata2-led-pin {
marvell,pins = "mpp14";
marvell,function = "gpio";
};
backup_led_pin: backup-led-pin {
marvell,pins = "mpp56";
marvell,function = "gpio";
};
backup_button_pin: backup-button-pin {
marvell,pins = "mpp58";
marvell,function = "gpio";
};
power_button_pin: power-button-pin {
marvell,pins = "mpp62";
marvell,function = "gpio";
};
reset_button_pin: reset-button-pin {
marvell,pins = "mpp6";
marvell,function = "gpio";
};
poweroff: poweroff {
marvell,pins = "mpp8";
marvell,function = "gpio";
};
};
mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
......@@ -257,3 +215,45 @@ gpio-poweroff {
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
};
&pinctrl {
power_led_pin: power-led-pin {
marvell,pins = "mpp57";
marvell,function = "gpio";
};
sata1_led_pin: sata1-led-pin {
marvell,pins = "mpp15";
marvell,function = "gpio";
};
sata2_led_pin: sata2-led-pin {
marvell,pins = "mpp14";
marvell,function = "gpio";
};
backup_led_pin: backup-led-pin {
marvell,pins = "mpp56";
marvell,function = "gpio";
};
backup_button_pin: backup-button-pin {
marvell,pins = "mpp58";
marvell,function = "gpio";
};
power_button_pin: power-button-pin {
marvell,pins = "mpp62";
marvell,function = "gpio";
};
reset_button_pin: reset-button-pin {
marvell,pins = "mpp6";
marvell,function = "gpio";
};
poweroff: poweroff {
marvell,pins = "mpp8";
marvell,function = "gpio";
};
};
arch/arm/boot/dts/armada-370-netgear-rn104.dts
View file @ 2f84411d
......@@ -53,38 +53,6 @@ serial@12000 {
status = "okay";
};
pinctrl {
poweroff: poweroff {
marvell,pins = "mpp60";
marvell,function = "gpio";
};
backup_button_pin: backup-button-pin {
marvell,pins = "mpp52";
marvell,function = "gpio";
};
power_button_pin: power-button-pin {
marvell,pins = "mpp62";
marvell,function = "gpio";
};
backup_led_pin: backup-led-pin {
marvell,pins = "mpp63";
marvell,function = "gpo";
};
power_led_pin: power-led-pin {
marvell,pins = "mpp64";
marvell,function = "gpio";
};
reset_button_pin: reset-button-pin {
marvell,pins = "mpp65";
marvell,function = "gpio";
};
};
mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
......@@ -269,3 +237,35 @@ gpio-poweroff {
gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
};
};
&pinctrl {
poweroff: poweroff {
marvell,pins = "mpp60";
marvell,function = "gpio";
};
backup_button_pin: backup-button-pin {
marvell,pins = "mpp52";
marvell,function = "gpio";
};
power_button_pin: power-button-pin {
marvell,pins = "mpp62";
marvell,function = "gpio";
};
backup_led_pin: backup-led-pin {
marvell,pins = "mpp63";
marvell,function = "gpo";
};
power_led_pin: power-led-pin {
marvell,pins = "mpp64";
marvell,function = "gpio";
};
reset_button_pin: reset-button-pin {
marvell,pins = "mpp65";
marvell,function = "gpio";
};
};
arch/arm/boot/dts/armada-370-rd.dts
View file @ 2f84411d
......@@ -59,18 +59,6 @@ pcie@2,0 {
};
internal-regs {
pinctrl {
fan_pins: fan-pins {
marvell,pins = "mpp8";
marvell,function = "gpio";
};
led_pins: led-pins {
marvell,pins = "mpp32";
marvell,function = "gpio";
};
};
serial@12000 {
status = "okay";
};
......@@ -85,10 +73,6 @@ mdio {
phy0: ethernet-phy@0 {
reg = <0>;
};
phy1: ethernet-phy@1 {
reg = <1>;
};
};
ethernet@70000 {
......@@ -100,8 +84,11 @@ ethernet@74000 {
pinctrl-0 = <&ge1_rgmii_pins>;
pinctrl-names = "default";
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
fixed-link {
speed = <1000>;
full-duplex;
};
};
mvsdio@d4000 {
......@@ -173,4 +160,56 @@ partition@1000000 {
};
};
};
dsa@0 {
compatible = "marvell,dsa";
#address-cells = <2>;
#size-cells = <0>;
dsa,ethernet = <&eth1>;
dsa,mii-bus = <&mdio>;
switch@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10 0>; /* MDIO address 16, switch 0 in tree */
port@0 {
reg = <0>;
label = "lan0";
};
port@1 {
reg = <1>;
label = "lan1";
};
port@2 {
reg = <2>;
label = "lan2";
};
port@3 {
reg = <3>;
label = "lan3";
};
port@5 {
reg = <5>;
label = "cpu";
};
};
};
};
&pinctrl {
fan_pins: fan-pins {
marvell,pins = "mpp8";
marvell,function = "gpio";
};
led_pins: led-pins {
marvell,pins = "mpp32";
marvell,function = "gpio";
};
};
arch/arm/boot/dts/armada-370-synology-ds213j.dts 0 → 100644
View file @ 2f84411d
/*
* Device Tree file for Synology DS213j
*
* Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Note: this Device Tree assumes that the bootloader has remapped the
* internal registers to 0xf1000000 (instead of the old 0xd0000000).
* The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
* bootloaders provided by Marvell. It is used in recent versions of
* DSM software provided by Synology. Nonetheless, some earlier boards
* were delivered with an older version of u-boot that left internal
* registers mapped at 0xd0000000. If you have such a device you will
* not be able to directly boot a kernel based on this Device Tree. In
* that case, the preferred solution is to update your bootloader (e.g.
* by upgrading to latest version of DSM, or building a new one and
* installing it from u-boot prompt) or adjust the Devive Tree
* (s/0xf1000000/0xd0000000/ in 'ranges' below).
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "armada-370.dtsi"
/ {
model = "Synology DS213j";
compatible = "synology,ds213j", "marvell,armada370",
"marvell,armada-370-xp";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
stdout-path = &uart0;
};
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
internal-regs {
/* RTC provided by Seiko S-35390A I2C RTC chip below */
rtc@10300 {
status = "disabled";
};
spi0: spi@10600 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q064";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <20000000>;
/*
* Warning!
*
* Synology u-boot uses its compiled-in environment
* and it seems Synology did not care to change u-boot
* default configuration in order to allow saving a
* modified environment at a sensible location. So,
* if you do a 'saveenv' under u-boot, your modified
* environment will be saved at 1MB after the start
* of the flash, i.e. in the middle of the uImage.
* For that reason, it is strongly advised not to
* change the default environment, unless you know
* what you are doing.
*/
partition@00000000 { /* u-boot */
label = "RedBoot";
reg = <0x00000000 0x000c0000>; /* 768KB */
};
partition@000c0000 { /* uImage */
label = "zImage";
reg = <0x000c0000 0x002d0000>; /* 2880KB */
};
partition@00390000 { /* uInitramfs */
label = "rd.gz";
reg = <0x00390000 0x00440000>; /* 4250KB */
};
partition@007d0000 { /* MAC address and serial number */
label = "vendor";
reg = <0x007d0000 0x00010000>; /* 64KB */
};
partition@007e0000 {
label = "RedBoot config";
reg = <0x007e0000 0x00010000>; /* 64KB */
};
partition@007f0000 {
label = "FIS directory";
reg = <0x007f0000 0x00010000>; /* 64KB */
};
};
};
i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
clock-frequency = <400000>;
status = "okay";
/* Main device RTC chip */
s35390a: s35390a@30 {
compatible = "sii,s35390a";
reg = <0x30>;
};
};
/* Connected to a header on device's PCB */
serial@12000 {
status = "okay";
};
/* Connected to a TI MSP430F2111 for power control */
serial@12100 {
status = "okay";
};
poweroff@12100 {
compatible = "synology,power-off";
reg = <0x12100 0x100>;
clocks = <&coreclk 0>;
};
/* rear USB port, near reset button */
usb@50000 {
status = "okay";
};
/* rear USB port, near RJ45 port */
usb@51000 {
status = "okay";
};
mdio {
phy1: ethernet-phy@1 { /* Marvell 88E1512 */
reg = <1>;
};
};
ethernet@70000 {
status = "okay";
phy = <&phy1>;
phy-mode = "sgmii";
};
sata@a0000 {
nr-ports = <2>;
status = "okay";
};
};
};
gpio-fan-32-38 {
status = "okay";
compatible = "gpio-fan";
pinctrl-0 = <&fan_ctrl_low_pin &fan_ctrl_mid_pin
&fan_ctrl_high_pin &fan_alarm_pin>;
pinctrl-names = "default";
gpios = <&gpio1 31 GPIO_ACTIVE_HIGH
&gpio2 0 GPIO_ACTIVE_HIGH
&gpio2 1 GPIO_ACTIVE_HIGH>;
alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = < 0 0
1000 1
1150 2
1350 4
1500 3
1650 5
1750 6
1900 7 >;
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&disk1_led_pin
&disk2_led_pin>;
pinctrl-names = "default";
disk1-led-amber {
label = "synology:amber:disk1";
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
disk2-led-amber {
label = "synology:amber:disk2";
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>;
pinctrl-names = "default";
sata1_regulator: sata1-regulator {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "SATA1 Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
startup-delay-us = <2000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
};
sata2_regulator: sata2-regulator {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "SATA2 Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
startup-delay-us = <4000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
};
};
};
&pinctrl {
disk1_led_pin: disk1-led-pin {
marvell,pins = "mpp31";
marvell,function = "gpio";
};
disk2_led_pin: disk2-led-pin {
marvell,pins = "mpp32";
marvell,function = "gpio";
};
sata1_pwr_pin: sata1-pwr-pin {
marvell,pins = "mpp37";
marvell,function = "gpio";
};
sata2_pwr_pin: sata2-pwr-pin {
marvell,pins = "mpp62";
marvell,function = "gpio";
};
sata1_pres_pin: sata1-pres-pin {
marvell,pins = "mpp60";
marvell,function = "gpio";
};
sata2_pres_pin: sata2-pres-pin {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
syno_id_bit0_pin: syno-id-bit0-pin {
marvell,pins = "mpp55";
marvell,function = "gpio";
};
syno_id_bit1_pin: syno-id-bit1-pin {
marvell,pins = "mpp56";
marvell,function = "gpio";
};
syno_id_bit2_pin: syno-id-bit2-pin {
marvell,pins = "mpp57";
marvell,function = "gpio";
};
syno_id_bit3_pin: syno-id-bit3-pin {
marvell,pins = "mpp58";
marvell,function = "gpio";
};
fan_ctrl_low_pin: fan-ctrl-low-pin {
marvell,pins = "mpp65";
marvell,function = "gpio";
};
fan_ctrl_mid_pin: fan-ctrl-mid-pin {
marvell,pins = "mpp64";
marvell,function = "gpio";
};
fan_ctrl_high_pin: fan-ctrl-high-pin {
marvell,pins = "mpp63";
marvell,function = "gpo";
};
fan_alarm_pin: fan-alarm-pin {
marvell,pins = "mpp38";
marvell,function = "gpio";
};
};
arch/arm/boot/dts/armada-370-xp.dtsi
View file @ 2f84411d
......@@ -151,7 +151,7 @@ i2c1: i2c@11100 {
status = "disabled";
};
serial@12000 {
uart0: serial@12000 {
compatible = "snps,dw-apb-uart";
reg = <0x12000 0x100>;
reg-shift = <2>;
......@@ -160,7 +160,8 @@ serial@12000 {
clocks = <&coreclk 0>;
status = "disabled";
};
serial@12100 {
uart1: serial@12100 {
compatible = "snps,dw-apb-uart";
reg = <0x12100 0x100>;
reg-shift = <2>;
......@@ -170,6 +171,10 @@ serial@12100 {
status = "disabled";
};
pinctrl: pin-ctrl@18000 {
reg = <0x18000 0x38>;
};
coredivclk: corediv-clock@18740 {
compatible = "marvell,armada-370-corediv-clock";
reg = <0x18740 0xc>;
......@@ -232,7 +237,7 @@ eth0: ethernet@70000 {
status = "disabled";
};
mdio {
mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
......
arch/arm/boot/dts/armada-370.dtsi
View file @ 2f84411d
......@@ -99,78 +99,26 @@ L2: l2-cache {
wt-override;
};
i2c0: i2c@11000 {
reg = <0x11000 0x20>;
/*
* Default SPI pinctrl setting, can be overwritten on
* board level if a different configuration is used.
*/
spi0: spi@10600 {
pinctrl-0 = <&spi0_pins1>;
pinctrl-names = "default";
};
i2c1: i2c@11100 {
reg = <0x11100 0x20>;
spi1: spi@10680 {
pinctrl-0 = <&spi1_pins>;
pinctrl-names = "default";
};
system-controller@18200 {
compatible = "marvell,armada-370-xp-system-controller";
reg = <0x18200 0x100>;
i2c0: i2c@11000 {
reg = <0x11000 0x20>;
};
pinctrl {
compatible = "marvell,mv88f6710-pinctrl";
reg = <0x18000 0x38>;
sdio_pins1: sdio-pins1 {
marvell,pins = "mpp9", "mpp11", "mpp12",
"mpp13", "mpp14", "mpp15";
marvell,function = "sd0";
};
sdio_pins2: sdio-pins2 {
marvell,pins = "mpp47", "mpp48", "mpp49",
"mpp50", "mpp51", "mpp52";
marvell,function = "sd0";
};
sdio_pins3: sdio-pins3 {
marvell,pins = "mpp48", "mpp49", "mpp50",
"mpp51", "mpp52", "mpp53";
marvell,function = "sd0";
};
i2c0_pins: i2c0-pins {
marvell,pins = "mpp2", "mpp3";
marvell,function = "i2c0";
};
i2s_pins1: i2s-pins1 {
marvell,pins = "mpp5", "mpp6", "mpp7",
"mpp8", "mpp9", "mpp10",
"mpp12", "mpp13";
marvell,function = "audio";
};
i2s_pins2: i2s-pins2 {
marvell,pins = "mpp49", "mpp47", "mpp50",
"mpp59", "mpp57", "mpp61",
"mpp62", "mpp60", "mpp58";
marvell,function = "audio";
};
mdio_pins: mdio-pins {
marvell,pins = "mpp17", "mpp18";
marvell,function = "ge";
};
ge0_rgmii_pins: ge0-rgmii-pins {
marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
"mpp9", "mpp10", "mpp11", "mpp12",
"mpp13", "mpp14", "mpp15", "mpp16";
marvell,function = "ge0";
};
ge1_rgmii_pins: ge1-rgmii-pins {
marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
"mpp23", "mpp24", "mpp25", "mpp26",
"mpp27", "mpp28", "mpp29", "mpp30";
marvell,function = "ge1";
};
i2c1: i2c@11100 {
reg = <0x11100 0x20>;
};
gpio0: gpio@18100 {
......@@ -206,6 +154,26 @@ gpio2: gpio@18180 {
interrupts = <91>;
};
/*
* Default UART pinctrl setting without RTS/CTS, can
* be overwritten on board level if a different
* configuration is used.
*/
uart0: serial@12000 {
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
};
uart1: serial@12100 {
pinctrl-0 = <&uart1_pins>;
pinctrl-names = "default";
};
system-controller@18200 {
compatible = "marvell,armada-370-xp-system-controller";
reg = <0x18200 0x100>;
};
gateclk: clock-gating-control@18220 {
compatible = "marvell,armada-370-gating-clock";
reg = <0x18220 0x4>;
......@@ -250,6 +218,7 @@ cpurst@20800 {
};
audio_controller: audio-controller@30000 {
#sound-dai-cells = <1>;
compatible = "marvell,armada370-audio";
reg = <0x30000 0x4000>;
interrupts = <93>;
......@@ -306,3 +275,91 @@ xor11 {
};
};
};
&pinctrl {
compatible = "marvell,mv88f6710-pinctrl";
spi0_pins1: spi0-pins1 {
marvell,pins = "mpp33", "mpp34",
"mpp35", "mpp36";
marvell,function = "spi0";
};
spi0_pins2: spi0_pins2 {
marvell,pins = "mpp32", "mpp63",
"mpp64", "mpp65";
marvell,function = "spi0";
};
spi1_pins: spi1-pins {
marvell,pins = "mpp49", "mpp50",
"mpp51", "mpp52";
marvell,function = "spi1";
};
uart0_pins: uart0-pins {
marvell,pins = "mpp0", "mpp1";
marvell,function = "uart0";
};
uart1_pins: uart1-pins {
marvell,pins = "mpp41", "mpp42";
marvell,function = "uart1";
};
sdio_pins1: sdio-pins1 {
marvell,pins = "mpp9", "mpp11", "mpp12",
"mpp13", "mpp14", "mpp15";
marvell,function = "sd0";
};
sdio_pins2: sdio-pins2 {
marvell,pins = "mpp47", "mpp48", "mpp49",
"mpp50", "mpp51", "mpp52";
marvell,function = "sd0";
};
sdio_pins3: sdio-pins3 {
marvell,pins = "mpp48", "mpp49", "mpp50",
"mpp51", "mpp52", "mpp53";
marvell,function = "sd0";
};
i2c0_pins: i2c0-pins {
marvell,pins = "mpp2", "mpp3";
marvell,function = "i2c0";
};
i2s_pins1: i2s-pins1 {
marvell,pins = "mpp5", "mpp6", "mpp7",
"mpp8", "mpp9", "mpp10",
"mpp12", "mpp13";
marvell,function = "audio";
};
i2s_pins2: i2s-pins2 {
marvell,pins = "mpp49", "mpp47", "mpp50",
"mpp59", "mpp57", "mpp61",
"mpp62", "mpp60", "mpp58";
marvell,function = "audio";
};
mdio_pins: mdio-pins {
marvell,pins = "mpp17", "mpp18";
marvell,function = "ge";
};
ge0_rgmii_pins: ge0-rgmii-pins {
marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
"mpp9", "mpp10", "mpp11", "mpp12",
"mpp13", "mpp14", "mpp15", "mpp16";
marvell,function = "ge0";
};
ge1_rgmii_pins: ge1-rgmii-pins {
marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
"mpp23", "mpp24", "mpp25", "mpp26",
"mpp27", "mpp28", "mpp29", "mpp30";
marvell,function = "ge1";
};
};
arch/arm/boot/dts/armada-375.dtsi
View file @ 2f84411d
......@@ -14,6 +14,7 @@
#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/phy/phy.h>
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
......@@ -348,6 +349,12 @@ gateclk: clock-gating-control@18220 {
#clock-cells = <1>;
};
usbcluster: usb-cluster@18400 {
compatible = "marvell,armada-375-usb-cluster";
reg = <0x18400 0x4>;
#phy-cells = <1>;
};
mbusc: mbus-controller@20000 {
compatible = "marvell,mbus-controller";
reg = <0x20000 0x100>, <0x20180 0x20>;
......@@ -398,6 +405,8 @@ usb@50000 {
reg = <0x50000 0x500>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 18>;
phys = <&usbcluster PHY_TYPE_USB2>;
phy-names = "usb";
status = "disabled";
};
......@@ -414,6 +423,8 @@ usb3@58000 {
reg = <0x58000 0x20000>,<0x5b880 0x80>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 16>;
phys = <&usbcluster PHY_TYPE_USB3>;
phy-names = "usb";
status = "disabled";
};
......
arch/arm/boot/dts/armada-385-db.dts
View file @ 2f84411d
......@@ -116,11 +116,11 @@ partition@1000000 {
};
sdhci@d8000 {
clock-frequency = <200000000>;
broken-cd;
wp-inverted;
bus-width = <8>;
status = "okay";
no-1-8-v;
};
usb3@f0000 {
......
arch/arm/boot/dts/armada-38x.dtsi
View file @ 2f84411d
......@@ -25,9 +25,9 @@ / {
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
eth0 = &eth0;
eth1 = &eth1;
eth2 = &eth2;
ethernet0 = &eth0;
ethernet1 = &eth1;
ethernet2 = &eth2;
};
soc {
......
arch/arm/boot/dts/armada-xp-axpwifiap.dts
View file @ 2f84411d
......@@ -100,8 +100,6 @@ ethernet@74000 {
spi0: spi@10600 {
status = "okay";
pinctrl-0 = <&pmx_spi>;
pinctrl-names = "default";
spi-flash@0 {
#address-cells = <1>;
......@@ -138,11 +136,6 @@ pmx_keys: pmx-keys {
marvell,function = "gpio";
};
pmx_spi: pmx-spi {
marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
marvell,function = "spi";
};
pmx_phy_int: pmx-phy-int {
marvell,pins = "mpp32";
marvell,function = "gpio";
......
arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
View file @ 2f84411d
......@@ -22,7 +22,7 @@ / {
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
stdout-path = "/soc/internal-regs/serial@12000";
stdout-path = &uart0;
};
memory {
......
arch/arm/boot/dts/armada-xp-synology-ds414.dts 0 → 100644
View file @ 2f84411d
/*
* Device Tree file for Synology DS414
*
* Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Note: this Device Tree assumes that the bootloader has remapped the
* internal registers to 0xf1000000 (instead of the old 0xd0000000).
* The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
* bootloaders provided by Marvell. It is used in recent versions of
* DSM software provided by Synology. Nonetheless, some earlier boards
* were delivered with an older version of u-boot that left internal
* registers mapped at 0xd0000000. If you have such a device you will
* not be able to directly boot a kernel based on this Device Tree. In
* that case, the preferred solution is to update your bootloader (e.g.
* by upgrading to latest version of DSM, or building a new one and
* installing it from u-boot prompt) or adjust the Devive Tree
* (s/0xf1000000/0xd0000000/ in 'ranges' below).
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "armada-xp-mv78230.dtsi"
/ {
model = "Synology DS414";
compatible = "synology,ds414", "marvell,armadaxp-mv78230",
"marvell,armadaxp", "marvell,armada-370-xp";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
stdout-path = &uart0;
};
memory {
device_type = "memory";
reg = <0 0x00000000 0 0x40000000>; /* 1GB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
pcie-controller {
status = "okay";
/*
* Connected to Marvell 88SX7042 SATA-II controller
* handling the four disks.
*/
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
/*
* Connected to EtronTech EJ168A XHCI controller
* providing the two rear USB 3.0 ports.
*/
pcie@5,0 {
/* Port 1, Lane 0 */
status = "okay";
};
};
internal-regs {
/* RTC is provided by Seiko S-35390A below */
rtc@10300 {
status = "disabled";
};
spi0: spi@10600 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q064";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <20000000>;
/*
* Warning!
*
* Synology u-boot uses its compiled-in environment
* and it seems Synology did not care to change u-boot
* default configuration in order to allow saving a
* modified environment at a sensible location. So,
* if you do a 'saveenv' under u-boot, your modified
* environment will be saved at 1MB after the start
* of the flash, i.e. in the middle of the uImage.
* For that reason, it is strongly advised not to
* change the default environment, unless you know
* what you are doing.
*/
partition@00000000 { /* u-boot */
label = "RedBoot";
reg = <0x00000000 0x000d0000>; /* 832KB */
};
partition@000c0000 { /* uImage */
label = "zImage";
reg = <0x000d0000 0x002d0000>; /* 2880KB */
};
partition@003a0000 { /* uInitramfs */
label = "rd.gz";
reg = <0x003a0000 0x00430000>; /* 4250KB */
};
partition@007d0000 { /* MAC address and serial number */
label = "vendor";
reg = <0x007d0000 0x00010000>; /* 64KB */
};
partition@007e0000 {
label = "RedBoot config";
reg = <0x007e0000 0x00010000>; /* 64KB */
};
partition@007f0000 {
label = "FIS directory";
reg = <0x007f0000 0x00010000>; /* 64KB */
};
};
};
i2c@11000 {
clock-frequency = <400000>;
status = "okay";
s35390a: s35390a@30 {
compatible = "sii,s35390a";
reg = <0x30>;
};
};
/* Connected to a header on device's PCB. This
* provides the main console for the device.
*
* Warning: the device may not boot with a 3.3V
* USB-serial converter connected when the power
* button is pressed. The converter needs to be
* connected a few seconds after pressing the
* power button. This is possibly due to UART0_TXD
* pin being sampled at reset (bit 0 of SAR).
*/
serial@12000 {
status = "okay";
};
/* Connected to a Microchip PIC16F883 for power control */
serial@12100 {
status = "okay";
};
poweroff@12100 {
compatible = "synology,power-off";
reg = <0x12100 0x100>;
clocks = <&coreclk 0>;
};
/* Front USB 2.0 port */
usb@50000 {
status = "okay";
};
mdio {
phy0: ethernet-phy@0 { /* Marvell 88E1512 */
reg = <0>;
};
phy1: ethernet-phy@1 { /* Marvell 88E1512 */
reg = <1>;
};
};
ethernet@70000 {
status = "okay";
pinctrl-0 = <&pmx_ge0_rgmii>;
pinctrl-names = "default";
phy = <&phy1>;
phy-mode = "rgmii-id";
};
ethernet@74000 {
pinctrl-0 = <&pmx_ge1_rgmii>;
pinctrl-names = "default";
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin
&sata3_pwr_pin &sata4_pwr_pin>;
pinctrl-names = "default";
sata1_regulator: sata1-regulator {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "SATA1 Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
startup-delay-us = <2000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
sata2_regulator: sata2-regulator {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "SATA2 Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
startup-delay-us = <4000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
sata3_regulator: sata3-regulator {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "SATA3 Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
startup-delay-us = <6000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
sata4_regulator: sata4-regulator {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "SATA4 Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
startup-delay-us = <8000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
};
};
&pinctrl {
sata1_pwr_pin: sata1-pwr-pin {
marvell,pins = "mpp42";
marvell,function = "gpio";
};
sata2_pwr_pin: sata2-pwr-pin {
marvell,pins = "mpp44";
marvell,function = "gpio";
};
sata3_pwr_pin: sata3-pwr-pin {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
sata4_pwr_pin: sata4-pwr-pin {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
sata1_pres_pin: sata1-pres-pin {
marvell,pins = "mpp34";
marvell,function = "gpio";
};
sata2_pres_pin: sata2-pres-pin {
marvell,pins = "mpp35";
marvell,function = "gpio";
};
sata3_pres_pin: sata3-pres-pin {
marvell,pins = "mpp40";
marvell,function = "gpio";
};
sata4_pres_pin: sata4-pres-pin {
marvell,pins = "mpp41";
marvell,function = "gpio";
};
syno_id_bit0_pin: syno-id-bit0-pin {
marvell,pins = "mpp26";
marvell,function = "gpio";
};
pmx_syno_id_bit1: syno-id-bit1-pin {
marvell,pins = "mpp28";
marvell,function = "gpio";
};
pmx_syno_id_bit2: syno-id-bit2-pin {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_fan1_alarm: fan1-alarm-pin {
marvell,pins = "mpp33";
marvell,function = "gpio";
};
fan2_alarm_pin: fan2-alarm-pin {
marvell,pins = "mpp32";
marvell,function = "gpio";
};
};
arch/arm/boot/dts/armada-xp.dtsi
View file @ 2f84411d
......@@ -43,6 +43,11 @@ L2: l2-cache {
wt-override;
};
spi0: spi@10600 {
pinctrl-0 = <&spi0_pins>;
pinctrl-names = "default";
};
i2c0: i2c@11000 {
compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
reg = <0x11000 0x100>;
......@@ -53,8 +58,10 @@ i2c1: i2c@11100 {
reg = <0x11100 0x100>;
};
serial@12200 {
uart2: serial@12200 {
compatible = "snps,dw-apb-uart";
pinctrl-0 = <&uart2_pins>;
pinctrl-names = "default";
reg = <0x12200 0x100>;
reg-shift = <2>;
interrupts = <43>;
......@@ -62,8 +69,11 @@ serial@12200 {
clocks = <&coreclk 0>;
status = "disabled";
};
serial@12300 {
uart3: serial@12300 {
compatible = "snps,dw-apb-uart";
pinctrl-0 = <&uart3_pins>;
pinctrl-names = "default";
reg = <0x12300 0x100>;
reg-shift = <2>;
interrupts = <44>;
......@@ -72,43 +82,6 @@ serial@12300 {
status = "disabled";
};
pinctrl: pin-ctrl@18000 {
reg = <0x18000 0x38>;
pmx_ge0_gmii: pmx-ge0-gmii {
marvell,pins =
"mpp0", "mpp1", "mpp2", "mpp3",
"mpp4", "mpp5", "mpp6", "mpp7",
"mpp8", "mpp9", "mpp10", "mpp11",
"mpp12", "mpp13", "mpp14", "mpp15",
"mpp16", "mpp17", "mpp18", "mpp19",
"mpp20", "mpp21", "mpp22", "mpp23";
marvell,function = "ge0";
};
pmx_ge0_rgmii: pmx-ge0-rgmii {
marvell,pins =
"mpp0", "mpp1", "mpp2", "mpp3",
"mpp4", "mpp5", "mpp6", "mpp7",
"mpp8", "mpp9", "mpp10", "mpp11";
marvell,function = "ge0";
};
pmx_ge1_rgmii: pmx-ge1-rgmii {
marvell,pins =
"mpp12", "mpp13", "mpp14", "mpp15",
"mpp16", "mpp17", "mpp18", "mpp19",
"mpp20", "mpp21", "mpp22", "mpp23";
marvell,function = "ge1";
};
sdio_pins: sdio-pins {
marvell,pins = "mpp30", "mpp31", "mpp32",
"mpp33", "mpp34", "mpp35";
marvell,function = "sd0";
};
};
system-controller@18200 {
compatible = "marvell,armada-370-xp-system-controller";
reg = <0x18200 0x500>;
......@@ -237,3 +210,54 @@ refclk: oscillator {
};
};
};
&pinctrl {
pmx_ge0_gmii: pmx-ge0-gmii {
marvell,pins =
"mpp0", "mpp1", "mpp2", "mpp3",
"mpp4", "mpp5", "mpp6", "mpp7",
"mpp8", "mpp9", "mpp10", "mpp11",
"mpp12", "mpp13", "mpp14", "mpp15",
"mpp16", "mpp17", "mpp18", "mpp19",
"mpp20", "mpp21", "mpp22", "mpp23";
marvell,function = "ge0";
};
pmx_ge0_rgmii: pmx-ge0-rgmii {
marvell,pins =
"mpp0", "mpp1", "mpp2", "mpp3",
"mpp4", "mpp5", "mpp6", "mpp7",
"mpp8", "mpp9", "mpp10", "mpp11";
marvell,function = "ge0";
};
pmx_ge1_rgmii: pmx-ge1-rgmii {
marvell,pins =
"mpp12", "mpp13", "mpp14", "mpp15",
"mpp16", "mpp17", "mpp18", "mpp19",
"mpp20", "mpp21", "mpp22", "mpp23";
marvell,function = "ge1";
};
sdio_pins: sdio-pins {
marvell,pins = "mpp30", "mpp31", "mpp32",
"mpp33", "mpp34", "mpp35";
marvell,function = "sd0";
};
spi0_pins: spi0-pins {
marvell,pins = "mpp36", "mpp37",
"mpp38", "mpp39";
marvell,function = "spi";
};
uart2_pins: uart2-pins {
marvell,pins = "mpp42", "mpp43";
marvell,function = "uart2";
};
uart3_pins: uart3-pins {
marvell,pins = "mpp44", "mpp45";
marvell,function = "uart3";
};
};
arch/arm/boot/dts/kirkwood-synology.dtsi
View file @ 2f84411d
......@@ -266,7 +266,7 @@ rs5c372: rs5c372@32 {
s35390a: s35390a@30 {
status = "disabled";
compatible = "ssi,s35390a";
compatible = "sii,s35390a";
reg = <0x30>;
};
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7