ath9k: Mute BT properly

Set The BT/WLAN priority weights correctly and make sure
that MCI_LNA_TAKE is sent only for cards that share
PA/LNA.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/ath/ath9k/ar9003_mci.c

@@ -771,8 +771,14 @@ int ar9003_mci_end_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 
 static void ar9003_mci_mute_bt(struct ath_hw *ah)
 {
+	struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+
 	/* disable all MCI messages */
 	REG_WRITE(ah, AR_MCI_MSG_ATTRIBUTES_TABLE, 0xffff0000);
+	REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS0, 0xffffffff);
+	REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS1, 0xffffffff);
+	REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS2, 0xffffffff);
+	REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS3, 0xffffffff);
 	REG_SET_BIT(ah, AR_MCI_TX_CTRL, AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
 
 	/* wait pending HW messages to flush out */
@@ -783,9 +789,10 @@ static void ar9003_mci_mute_bt(struct ath_hw *ah)
 	 * 1. reset not after resuming from full sleep
 	 * 2. before reset MCI RX, to quiet BT and avoid MCI RX misalignment
 	 */
-	ar9003_mci_send_lna_take(ah, true);
-
-	udelay(5);
+	if (MCI_ANT_ARCH_PA_LNA_SHARED(mci)) {
+		ar9003_mci_send_lna_take(ah, true);
+		udelay(5);
+	}
 
 	ar9003_mci_send_sys_sleeping(ah, true);
 }

drivers/net/wireless/ath/ath9k/reg_mci.h

@@ -212,6 +212,11 @@
 #define AR_BTCOEX_CTRL_SPDT_POLARITY                    0x80000000
 #define AR_BTCOEX_CTRL_SPDT_POLARITY_S                  31
 
+#define AR_BTCOEX_WL_WEIGHTS0                           0x18b0
+#define AR_BTCOEX_WL_WEIGHTS1                           0x18b4
+#define AR_BTCOEX_WL_WEIGHTS2                           0x18b8
+#define AR_BTCOEX_WL_WEIGHTS3                           0x18bc
+
 #define AR_BTCOEX_MAX_TXPWR(_x)                         (0x18c0 + ((_x) << 2))
 #define AR_BTCOEX_WL_LNA                                0x1940
 #define AR_BTCOEX_RFGAIN_CTRL                           0x1944