phy: Add Sparx5 ethernet serdes PHY driver

Add the Microchip Sparx5 ethernet serdes PHY driver for the 6G, 10G and 25G
interfaces available in the Sparx5 SoC.
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210218161451.3489955-4-steen.hegelund@microchip.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

drivers/phy/Kconfig

@@ -71,6 +71,7 @@ source "drivers/phy/ingenic/Kconfig"
 source "drivers/phy/lantiq/Kconfig"
 source "drivers/phy/marvell/Kconfig"
 source "drivers/phy/mediatek/Kconfig"
+source "drivers/phy/microchip/Kconfig"
 source "drivers/phy/motorola/Kconfig"
 source "drivers/phy/mscc/Kconfig"
 source "drivers/phy/qualcomm/Kconfig"

drivers/phy/Makefile

@@ -20,6 +20,7 @@ obj-y					+= allwinner/	\
 					   lantiq/	\
 					   marvell/	\
 					   mediatek/	\
+					   microchip/	\
 					   motorola/	\
 					   mscc/	\
 					   qualcomm/	\

drivers/phy/microchip/Kconfig

+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Phy drivers for Microchip devices
+#
+
+config PHY_SPARX5_SERDES
+	tristate "Microchip Sparx5 SerDes PHY driver"
+	select GENERIC_PHY
+	depends on OF
+	depends on HAS_IOMEM
+	help
+	  Enable this for support of the 10G/25G SerDes on Microchip Sparx5.

drivers/phy/microchip/Makefile

+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the Microchip phy drivers.
+#
+
+obj-$(CONFIG_PHY_SPARX5_SERDES) := sparx5_serdes.o

drivers/phy/microchip/sparx5_serdes.h

+/* SPDX-License-Identifier: GPL-2.0+
+ * Microchip Sparx5 SerDes driver
+ *
+ * Copyright (c) 2020 Microchip Technology Inc.
+ */
+
+#ifndef _SPARX5_SERDES_H_
+#define _SPARX5_SERDES_H_
+
+#include "sparx5_serdes_regs.h"
+
+#define SPX5_SERDES_MAX       33
+
+enum sparx5_serdes_type {
+	SPX5_SDT_6G  = 6,
+	SPX5_SDT_10G = 10,
+	SPX5_SDT_25G = 25,
+};
+
+enum sparx5_serdes_mode {
+	SPX5_SD_MODE_NONE,
+	SPX5_SD_MODE_2G5,
+	SPX5_SD_MODE_QSGMII,
+	SPX5_SD_MODE_100FX,
+	SPX5_SD_MODE_1000BASEX,
+	SPX5_SD_MODE_SFI,
+};
+
+struct sparx5_serdes_private {
+	struct device *dev;
+	void __iomem *regs[NUM_TARGETS];
+	struct phy *phys[SPX5_SERDES_MAX];
+	bool cmu_enabled;
+	unsigned long coreclock;
+};
+
+struct sparx5_serdes_macro {
+	struct sparx5_serdes_private *priv;
+	u32 sidx;
+	u32 stpidx;
+	enum sparx5_serdes_type serdestype;
+	enum sparx5_serdes_mode serdesmode;
+	phy_interface_t portmode;
+	int speed;
+	enum phy_media media;
+};
+
+/* Read, Write and modify registers content.
+ * The register definition macros start at the id
+ */
+static inline void __iomem *sdx5_addr(void __iomem *base[],
+				      int id, int tinst, int tcnt,
+				      int gbase, int ginst,
+				      int gcnt, int gwidth,
+				      int raddr, int rinst,
+				      int rcnt, int rwidth)
+{
+	WARN_ON((tinst) >= tcnt);
+	WARN_ON((ginst) >= gcnt);
+	WARN_ON((rinst) >= rcnt);
+	return base[id + (tinst)] +
+		gbase + ((ginst) * gwidth) +
+		raddr + ((rinst) * rwidth);
+}
+
+static inline void __iomem *sdx5_inst_baseaddr(void __iomem *base,
+					       int gbase, int ginst,
+					       int gcnt, int gwidth,
+					       int raddr, int rinst,
+					       int rcnt, int rwidth)
+{
+	WARN_ON((ginst) >= gcnt);
+	WARN_ON((rinst) >= rcnt);
+	return base +
+		gbase + ((ginst) * gwidth) +
+		raddr + ((rinst) * rwidth);
+}
+
+static inline void sdx5_rmw(u32 val, u32 mask, struct sparx5_serdes_private *priv,
+			    int id, int tinst, int tcnt,
+			    int gbase, int ginst, int gcnt, int gwidth,
+			    int raddr, int rinst, int rcnt, int rwidth)
+{
+	u32 nval;
+	void __iomem *addr =
+		sdx5_addr(priv->regs, id, tinst, tcnt,
+			  gbase, ginst, gcnt, gwidth,
+			  raddr, rinst, rcnt, rwidth);
+	nval = readl(addr);
+	nval = (nval & ~mask) | (val & mask);
+	writel(nval, addr);
+}
+
+static inline void sdx5_inst_rmw(u32 val, u32 mask, void __iomem *iomem,
+				 int id, int tinst, int tcnt,
+				 int gbase, int ginst, int gcnt, int gwidth,
+				 int raddr, int rinst, int rcnt, int rwidth)
+{
+	u32 nval;
+	void __iomem *addr =
+		sdx5_inst_baseaddr(iomem,
+				   gbase, ginst, gcnt, gwidth,
+				   raddr, rinst, rcnt, rwidth);
+	nval = readl(addr);
+	nval = (nval & ~mask) | (val & mask);
+	writel(nval, addr);
+}
+
+static inline void sdx5_rmw_addr(u32 val, u32 mask, void __iomem *addr)
+{
+	u32 nval;
+
+	nval = readl(addr);
+	nval = (nval & ~mask) | (val & mask);
+	writel(nval, addr);
+}
+
+static inline void __iomem *sdx5_inst_get(struct sparx5_serdes_private *priv,
+					  int id, int tinst)
+{
+	return priv->regs[id + tinst];
+}
+
+static inline void __iomem *sdx5_inst_addr(void __iomem *iomem,
+					   int id, int tinst, int tcnt,
+					   int gbase,
+					   int ginst, int gcnt, int gwidth,
+					   int raddr,
+					   int rinst, int rcnt, int rwidth)
+{
+	return sdx5_inst_baseaddr(iomem, gbase, ginst, gcnt, gwidth,
+				  raddr, rinst, rcnt, rwidth);
+}
+
+
+#endif /* _SPARX5_SERDES_REGS_H_ */