Merge intel.com:/home/lenb/src/linux-acpi-test-2.6.5

into intel.com:/home/lenb/src/linux-acpi-test-2.6.6

Documentation/kernel-parameters.txt

@@ -91,13 +91,14 @@ running once the system is up.
 
 	acpi=		[HW,ACPI] Advanced Configuration and Power Interface 
 			Format: { force | off | ht | strict }
-			force -- enables ACPI for systems with default off
-			off -- disabled ACPI for systems with default on
+			force -- enable ACPI if default was off
+			off -- disable ACPI if default was on
+			noirq -- do not use ACPI for IRQ routing
 			ht -- run only enough ACPI to enable Hyper Threading
 			strict --  Be less tolerant of platforms that are not
 				strictly ACPI specification compliant.
 
-			See also Documentation/pm.txt.
+			See also Documentation/pm.txt, pci=noacpi
 
 	acpi_sleep=	[HW,ACPI] Sleep options
 			Format: { s3_bios, s3_mode }
@@ -122,6 +123,10 @@ running once the system is up.
 
 	acpi_serialize	[HW,ACPI] force serialization of AML methods
 
+	acpi_skip_timer_override [HW,ACPI]
+			Recognize and ignore IRQ0/pin2 Interrupt Override.
+			For broken nForce2 BIOS resulting in XT-PIC timer.
+
 	ad1816=		[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>
 			See also Documentation/sound/oss/AD1816.
@@ -831,7 +836,8 @@ running once the system is up.
 					and Omnibook XE3 notebooks. This will
 					have no effect if ACPI IRQ routing is
 					enabled.
-		noacpi			[IA-32] Do not use ACPI for IRQ routing.
+		noacpi			[IA-32] Do not use ACPI for IRQ routing
+					or for PCI scanning.
 
 	pcmv=		[HW,PCMCIA] BadgePAD 4
 

arch/i386/kernel/acpi/boot.c

@@ -53,7 +53,13 @@ static inline int ioapic_setup_disabled(void) { return 0; }
 
 #define PREFIX			"ACPI: "
 
+#ifdef CONFIG_ACPI_PCI
 int acpi_noirq __initdata;	/* skip ACPI IRQ initialization */
+int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */
+#else
+int acpi_noirq __initdata = 1;
+int acpi_pci_disabled __initdata = 1;
+#endif
 int acpi_ht __initdata = 1;	/* enable HT */
 
 int acpi_lapic;
@@ -62,6 +68,7 @@ int acpi_strict;
 
 acpi_interrupt_flags acpi_sci_flags __initdata;
 int acpi_sci_override_gsi __initdata;
+int acpi_skip_timer_override __initdata;
 
 #ifdef CONFIG_X86_LOCAL_APIC
 static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
@@ -329,6 +336,12 @@ acpi_parse_int_src_ovr (
 		return 0;
 	}
 
+	if (acpi_skip_timer_override &&
+		intsrc->bus_irq == 0 && intsrc->global_irq == 2) {
+			printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
+			return 0;
+	}
+
 	mp_override_legacy_irq (
 		intsrc->bus_irq,
 		intsrc->flags.polarity,
@@ -653,9 +666,6 @@ acpi_parse_madt_ioapic_entries(void)
 		return count;
 	}
 
-	/* Build a default routing table for legacy (ISA) interrupts. */
-	mp_config_acpi_legacy_irqs();
-
 	count = acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, NR_IRQ_VECTORS);
 	if (count < 0) {
 		printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n");
@@ -670,6 +680,9 @@ acpi_parse_madt_ioapic_entries(void)
 	if (!acpi_sci_override_gsi)
 		acpi_sci_ioapic_setup(acpi_fadt.sci_int, 0, 0);
 
+	/* Fill in identity legacy mapings where no override */
+	mp_config_acpi_legacy_irqs();
+
 	count = acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, NR_IRQ_VECTORS);
 	if (count < 0) {
 		printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");

arch/i386/kernel/dmi_scan.c

@@ -412,30 +412,6 @@ static __init int swab_apm_power_in_minutes(struct dmi_blacklist *d)
 	return 0;
 }
 
-/*
- * The Intel 440GX hall of shame. 
- *
- * On many (all we have checked) of these boxes the $PIRQ table is wrong.
- * The MP1.4 table is right however and so SMP kernels tend to work. 
- */
- 
-static __init int broken_pirq(struct dmi_blacklist *d)
-{
-
-	printk(KERN_INFO " *** Possibly defective BIOS detected (irqtable)\n");
-	printk(KERN_INFO " *** Many BIOSes matching this signature have incorrect IRQ routing tables.\n");
-	printk(KERN_INFO " *** If you see IRQ problems, in particular SCSI resets and hangs at boot\n");
-	printk(KERN_INFO " *** contact your hardware vendor and ask about updates.\n");
-	printk(KERN_INFO " *** Building an SMP kernel may evade the bug some of the time.\n");
-#ifdef CONFIG_X86_IO_APIC
-	{
-		extern int skip_ioapic_setup;
-		skip_ioapic_setup = 0;
-	}
-#endif
-	return 0;
-}
-
 /*
  * ASUS K7V-RM has broken ACPI table defining sleep modes
  */
@@ -555,14 +531,33 @@ static __init __attribute__((unused)) int force_acpi_ht(struct dmi_blacklist *d)
 #endif
 
 #ifdef	CONFIG_ACPI_PCI
+static __init int disable_acpi_irq(struct dmi_blacklist *d) 
+{ 
+	printk(KERN_NOTICE "%s detected: force use of acpi=noirq\n", d->ident); 	
+	acpi_noirq_set();
+	return 0;
+}
 static __init int disable_acpi_pci(struct dmi_blacklist *d) 
 { 
 	printk(KERN_NOTICE "%s detected: force use of pci=noacpi\n", d->ident); 	
-	acpi_noirq_set();
+	acpi_disable_pci();
 	return 0;
-} 
+}  
 #endif
 
+/*
+ * early nForce2 reference BIOS shipped with a
+ * bogus ACPI IRQ0 -> pin2 interrupt override -- ignore it
+ */
+static __init int ignore_timer_override(struct dmi_blacklist *d)
+{
+	extern int acpi_skip_timer_override;
+	printk(KERN_NOTICE "%s detected: BIOS IRQ0 pin2 override"
+		" will be ignored\n", d->ident); 	
+
+	acpi_skip_timer_override = 1;
+	return 0;
+}
 /*
  *	Process the DMI blacklists
  */
@@ -815,52 +810,6 @@ static __initdata struct dmi_blacklist dmi_blacklist[]={
 			NO_MATCH, NO_MATCH
 			} },
 
-	/* Problem Intel 440GX bioses */
-
-	{ broken_pirq, "SABR1 Bios", {			/* Bad $PIR */
-			MATCH(DMI_BIOS_VENDOR, "Intel Corporation"),
-			MATCH(DMI_BIOS_VERSION,"SABR1"),
-			NO_MATCH, NO_MATCH
-			} },
-	{ broken_pirq, "l44GX Bios", {        		/* Bad $PIR */
-			MATCH(DMI_BIOS_VENDOR, "Intel Corporation"),
-			MATCH(DMI_BIOS_VERSION,"L440GX0.86B.0094.P10"),
-			NO_MATCH, NO_MATCH
-                        } },
-	{ broken_pirq, "l44GX Bios", {        		/* Bad $PIR */
-			MATCH(DMI_BIOS_VENDOR, "Intel Corporation"),
-			MATCH(DMI_BIOS_VERSION,"L440GX0.86B.0115.P12"),
-			NO_MATCH, NO_MATCH
-                        } },
-	{ broken_pirq, "l44GX Bios", {        		/* Bad $PIR */
-			MATCH(DMI_BIOS_VENDOR, "Intel Corporation"),
-			MATCH(DMI_BIOS_VERSION,"L440GX0.86B.0120.P12"),
-			NO_MATCH, NO_MATCH
-                        } },
-	{ broken_pirq, "l44GX Bios", {		/* Bad $PIR */
-			MATCH(DMI_BIOS_VENDOR, "Intel Corporation"),
-			MATCH(DMI_BIOS_VERSION,"L440GX0.86B.0125.P13"),
-			NO_MATCH, NO_MATCH
-			} },
-	{ broken_pirq, "l44GX Bios", {		/* Bad $PIR */
-			MATCH(DMI_BIOS_VENDOR, "Intel Corporation"),
-			MATCH(DMI_BIOS_VERSION,"L440GX0.86B.0066.P07.9906041405"),
-			NO_MATCH, NO_MATCH
-			} },
-
-	{ broken_pirq, "IBM xseries 370", {		/* Bad $PIR */
-			MATCH(DMI_BIOS_VENDOR, "IBM"),
-			MATCH(DMI_BIOS_VERSION,"MMKT33AUS"),
-			NO_MATCH, NO_MATCH
-			} },
-                        
-	/* Intel in disguise - In this case they can't hide and they don't run
-	   too well either... */
-	{ broken_pirq, "Dell PowerEdge 8450", {		/* Bad $PIR */
-			MATCH(DMI_PRODUCT_NAME, "Dell PowerEdge 8450"),
-			NO_MATCH, NO_MATCH, NO_MATCH
-			} },
-			
 	{ broken_acpi_Sx, "ASUS K7V-RM", {		/* Bad ACPI Sx table */
 			MATCH(DMI_BIOS_VERSION,"ASUS K7V-RM ACPI BIOS Revision 1003A"),
 			MATCH(DMI_BOARD_NAME, "<K7V-RM>"),
@@ -1018,6 +967,49 @@ static __initdata struct dmi_blacklist dmi_blacklist[]={
 			MATCH(DMI_BOARD_VENDOR, "IBM"),
 			MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"),
 			NO_MATCH, NO_MATCH }},
+
+	/*
+	 * Systems with nForce2 BIOS timer override bug
+	 * nVidia claims all nForce have timer on pin0,
+	 * and applying this workaround is a NOP on fixed BIOS,
+	 * so prospects are good for replacing these entries
+	 * with something to key of chipset PCI-ID.
+	 */
+	{ ignore_timer_override, "Abit NF7-S v2", {
+			MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
+			MATCH(DMI_BOARD_NAME, "NF7-S/NF7,NF7-V (nVidia-nForce2)"),
+			MATCH(DMI_BIOS_VERSION, "6.00 PG"),
+			MATCH(DMI_BIOS_DATE, "03/24/2004") }},
+
+	{ ignore_timer_override, "Asus A7N8X v2", {
+			MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			MATCH(DMI_BOARD_NAME, "A7N8X2.0"),
+			MATCH(DMI_BIOS_VERSION, "ASUS A7N8X2.0 Deluxe ACPI BIOS Rev 1007"),
+			MATCH(DMI_BIOS_DATE, "10/06/2003") }},
+
+	{ ignore_timer_override, "Asus A7N8X-X", {
+			MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			MATCH(DMI_BOARD_NAME, "A7N8X-X"),
+			MATCH(DMI_BIOS_VERSION, "ASUS A7N8X-X ACPI BIOS Rev 1009"),
+			MATCH(DMI_BIOS_DATE, "2/3/2004") }},
+
+	{ ignore_timer_override, "MSI K7N2-Delta", {
+			MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+			MATCH(DMI_BOARD_NAME, "MS-6570"),
+			MATCH(DMI_BIOS_VERSION, "6.00 PG"),
+			MATCH(DMI_BIOS_DATE, "03/29/2004") }},
+
+	{ ignore_timer_override, "Shuttle SN41G2", {
+			MATCH(DMI_BOARD_VENDOR, "Shuttle Inc"),
+			MATCH(DMI_BOARD_NAME, "FN41"),
+			MATCH(DMI_BIOS_VERSION, "6.00 PG"),
+			MATCH(DMI_BIOS_DATE, "01/14/2004") }},
+
+	{ ignore_timer_override, "Shuttle AN35N", {
+			MATCH(DMI_BOARD_VENDOR, "Shuttle Inc"),
+			MATCH(DMI_BOARD_NAME, "AN35"),
+			MATCH(DMI_BIOS_VERSION, "6.00 PG"),
+			MATCH(DMI_BIOS_DATE, "12/05/2003") }},
 #endif	// CONFIG_ACPI_BOOT
 
 #ifdef	CONFIG_ACPI_PCI
@@ -1025,13 +1017,21 @@ static __initdata struct dmi_blacklist dmi_blacklist[]={
 	 *	Boxes that need ACPI PCI IRQ routing disabled
 	 */
 
-	{ disable_acpi_pci, "ASUS A7V", {
+	{ disable_acpi_irq, "ASUS A7V", {
 			MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"),
 			MATCH(DMI_BOARD_NAME, "<A7V>"),
 			/* newer BIOS, Revision 1011, does work */
 			MATCH(DMI_BIOS_VERSION, "ASUS A7V ACPI BIOS Revision 1007"),
 			NO_MATCH }},
 
+	/*
+	 *	Boxes that need ACPI PCI IRQ routing and PCI scan disabled
+	 */
+	{ disable_acpi_pci, "ASUS PR-DLS", {	/* _BBN 0 bug */
+			MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			MATCH(DMI_BOARD_NAME, "PR-DLS"),
+			MATCH(DMI_BIOS_VERSION, "ASUS PR-DLS ACPI BIOS Revision 1010"),
+			MATCH(DMI_BIOS_DATE, "03/21/2003") }},
 #endif
 
 	{ NULL, }

arch/i386/kernel/io_apic.c

@@ -2266,18 +2266,10 @@ static inline void check_timer(void)
 
 /*
  *
- * IRQ's that are handled by the old PIC in all cases:
+ * IRQ's that are handled by the PIC in the MPS IOAPIC case.
  * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ.
  *   Linux doesn't really care, as it's not actually used
  *   for any interrupt handling anyway.
- * - There used to be IRQ13 here as well, but all
- *   MPS-compliant must not use it for FPU coupling and we
- *   want to use exception 16 anyway.  And there are
- *   systems who connect it to an I/O APIC for other uses.
- *   Thus we don't mark it special any longer.
- *
- * Additionally, something is definitely wrong with irq9
- * on PIIX4 boards.
  */
 #define PIC_IRQS	(1 << PIC_CASCADE_IR)
 
@@ -2285,7 +2277,11 @@ void __init setup_IO_APIC(void)
 {
 	enable_IO_APIC();
 
-	io_apic_irqs = ~PIC_IRQS;
+	if (acpi_ioapic)
+		io_apic_irqs = ~0;	/* all IRQs go through IOAPIC */
+	else
+		io_apic_irqs = ~PIC_IRQS;
+
 	printk("ENABLING IO-APIC IRQs\n");
 
 	/*

arch/i386/kernel/mpparse.c

@@ -929,8 +929,6 @@ void __init mp_override_legacy_irq (
 	u32			gsi)
 {
 	struct mpc_config_intsrc intsrc;
-	int			i = 0;
-	int			found = 0;
 	int			ioapic = -1;
 	int			pin = -1;
 
@@ -963,23 +961,9 @@ void __init mp_override_legacy_irq (
 		(intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, 
 		intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq);
 
-	/* 
-	 * If an existing [IOAPIC.PIN -> IRQ] routing entry exists we override it.
-	 * Otherwise create a new entry (e.g. gsi == 2).
-	 */
-	for (i = 0; i < mp_irq_entries; i++) {
-		if ((mp_irqs[i].mpc_srcbus == intsrc.mpc_srcbus) 
-			&& (mp_irqs[i].mpc_srcbusirq == intsrc.mpc_srcbusirq)) {
-			mp_irqs[i] = intsrc;
-			found = 1;
-			break;
-		}
-	}
-	if (!found) {
-		mp_irqs[mp_irq_entries] = intsrc;
-		if (++mp_irq_entries == MAX_IRQ_SOURCES)
-			panic("Max # of irq sources exceeded!\n");
-	}
+	mp_irqs[mp_irq_entries] = intsrc;
+	if (++mp_irq_entries == MAX_IRQ_SOURCES)
+		panic("Max # of irq sources exceeded!\n");
 
 	return;
 }
@@ -1010,13 +994,20 @@ void __init mp_config_acpi_legacy_irqs (void)
 	intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
 
 	/* 
-	 * Use the default configuration for the IRQs 0-15.  These may be
+	 * Use the default configuration for the IRQs 0-15.  Unless
 	 * overriden by (MADT) interrupt source override entries.
 	 */
 	for (i = 0; i < 16; i++) {
+		int idx;
+
+		for (idx = 0; idx < mp_irq_entries; idx++)
+			if (mp_irqs[idx].mpc_srcbus == MP_ISA_BUS &&
+				(mp_irqs[idx].mpc_srcbusirq == i ||
+				mp_irqs[idx].mpc_dstirq == i))
+					break;
 
-		if (i == 2)
-			continue;			/* Don't connect IRQ2 */
+		if (idx != mp_irq_entries)
+			continue;			  /* IRQ already used */
 
 		intsrc.mpc_irqtype = mp_INT;
 		intsrc.mpc_srcbusirq = i;		   /* Identity mapped */

arch/i386/kernel/setup.c

@@ -583,9 +583,13 @@ static void __init parse_cmdline_early (char ** cmdline_p)
 				disable_acpi();
 			acpi_ht = 1;
 		}
-
-		/* "pci=noacpi" disables ACPI interrupt routing */
+		
+		/* "pci=noacpi" disable ACPI IRQ routing and PCI scan */
 		else if (!memcmp(from, "pci=noacpi", 10)) {
+			acpi_disable_pci();
+		}
+		/* "acpi=noirq" disables ACPI interrupt routing */
+		else if (!memcmp(from, "acpi=noirq", 10)) {
 			acpi_noirq_set();
 		}
 
@@ -601,6 +605,9 @@ static void __init parse_cmdline_early (char ** cmdline_p)
 		else if (!memcmp(from, "acpi_sci=low", 12))
 			acpi_sci_flags.polarity = 3;
 
+		else if (!memcmp(from, "acpi_skip_timer_override", 24))
+			acpi_skip_timer_override = 1;
+
 #ifdef CONFIG_X86_LOCAL_APIC
 		/* disable IO-APIC */
 		else if (!memcmp(from, "noapic", 6))

arch/i386/mach-default/setup.c

@@ -7,6 +7,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <asm/acpi.h>
 #include <asm/arch_hooks.h>
 
 /**
@@ -43,7 +44,8 @@ void __init intr_init_hook(void)
 	apic_intr_init();
 #endif
 
-	setup_irq(2, &irq2);
+	if (!acpi_ioapic)
+		setup_irq(2, &irq2);
 }
 
 /**

arch/i386/mach-es7000/setup.c

@@ -7,6 +7,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <asm/acpi.h>
 #include <asm/arch_hooks.h>
 
 /**
@@ -17,8 +18,7 @@
  *	the "ordinary" interrupt call gates.  For legacy reasons, the ISA
  *	interrupts should be initialised here if the machine emulates a PC
  *	in any way.
- **/
-void __init pre_intr_init_hook(void)
+ **/void __init pre_intr_init_hook(void)
 {
 	init_ISA_irqs();
 }
@@ -43,7 +43,8 @@ void __init intr_init_hook(void)
 	apic_intr_init();
 #endif
 
-	setup_irq(2, &irq2);
+	if (!acpi_ioapic)
+		setup_irq(2, &irq2);
 }
 
 /**

arch/i386/mach-voyager/setup.c

@@ -6,6 +6,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <asm/acpi.h>
 #include <asm/arch_hooks.h>
 
 void __init pre_intr_init_hook(void)
@@ -24,7 +25,8 @@ void __init intr_init_hook(void)
 	smp_intr_init();
 #endif
 
-	setup_irq(2, &irq2);
+	if (!acpi_ioapic)
+		setup_irq(2, &irq2);
 }
 
 void __init pre_setup_arch_hook(void)

arch/i386/pci/irq.c

@@ -453,15 +453,12 @@ static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
 
 static __init int intel_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
 {
-#if 0 /* Let's see what chip this is supposed to be ... */
-	/* We must not touch 440GX even if we have tables. 440GX has
-	   different IRQ routing weirdness */
+	/* 440GX has a proprietary PIRQ router -- don't use it */
 	if (	pci_find_device(PCI_VENDOR_ID_INTEL,
 				PCI_DEVICE_ID_INTEL_82443GX_0, NULL) ||
 		pci_find_device(PCI_VENDOR_ID_INTEL,
 				PCI_DEVICE_ID_INTEL_82443GX_2, NULL))
 		return 0;
-#endif
 
 	switch(device)
 	{

arch/x86_64/kernel/Makefile

@@ -8,7 +8,7 @@ obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o \
 		ptrace.o i8259.o ioport.o ldt.o setup.o time.o sys_x86_64.o \
 		x8664_ksyms.o i387.o syscall.o vsyscall.o \
 		setup64.o bootflag.o e820.o reboot.o warmreboot.o
-obj-y += mce.o acpi/
+obj-y += mce.o
 
 obj-$(CONFIG_MTRR)		+= ../../i386/kernel/cpu/mtrr/
 obj-$(CONFIG_ACPI_BOOT)		+= acpi/

arch/x86_64/kernel/i8259.c

@@ -13,6 +13,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/sysdev.h>
 
+#include <asm/acpi.h>
 #include <asm/atomic.h>
 #include <asm/system.h>
 #include <asm/io.h>
@@ -490,5 +491,6 @@ void __init init_IRQ(void)
 	 */
 	setup_timer();
 
-	setup_irq(2, &irq2);
+	if (!acpi_ioapic)
+		setup_irq(2, &irq2);
 }

arch/x86_64/kernel/io_apic.c

@@ -1740,18 +1740,10 @@ static inline void check_timer(void)
 
 /*
  *
- * IRQ's that are handled by the old PIC in all cases:
+ * IRQ's that are handled by the PIC in the MPS IOAPIC case.
  * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ.
  *   Linux doesn't really care, as it's not actually used
  *   for any interrupt handling anyway.
- * - There used to be IRQ13 here as well, but all
- *   MPS-compliant must not use it for FPU coupling and we
- *   want to use exception 16 anyway.  And there are
- *   systems who connect it to an I/O APIC for other uses.
- *   Thus we don't mark it special any longer.
- *
- * Additionally, something is definitely wrong with irq9
- * on PIIX4 boards.
  */
 #define PIC_IRQS	(1<<2)
 
@@ -1759,7 +1751,11 @@ void __init setup_IO_APIC(void)
 {
 	enable_IO_APIC();
 
-	io_apic_irqs = ~PIC_IRQS;
+	if (acpi_ioapic)
+		io_apic_irqs = ~0;	/* all IRQs go through IOAPIC */
+	else
+		io_apic_irqs = ~PIC_IRQS;
+
 	printk("ENABLING IO-APIC IRQs\n");
 
 	/*

arch/x86_64/kernel/mpparse.c

@@ -784,8 +784,6 @@ void __init mp_override_legacy_irq (
 	u32			gsi)
 {
 	struct mpc_config_intsrc intsrc;
-	int			i = 0;
-	int			found = 0;
 	int			ioapic = -1;
 	int			pin = -1;
 
@@ -818,23 +816,9 @@ void __init mp_override_legacy_irq (
 		(intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, 
 		intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq);
 
-	/* 
-	 * If an existing [IOAPIC.PIN -> IRQ] routing entry exists we override it.
-	 * Otherwise create a new entry (e.g. gsi == 2).
-	 */
-	for (i = 0; i < mp_irq_entries; i++) {
-		if ((mp_irqs[i].mpc_srcbus == intsrc.mpc_srcbus) 
-			&& (mp_irqs[i].mpc_srcbusirq == intsrc.mpc_srcbusirq)) {
-			mp_irqs[i] = intsrc;
-			found = 1;
-			break;
-		}
-	}
-	if (!found) {
-		mp_irqs[mp_irq_entries] = intsrc;
-		if (++mp_irq_entries == MAX_IRQ_SOURCES)
-			panic("Max # of irq sources exceeded!\n");
-	}
+	mp_irqs[mp_irq_entries] = intsrc;
+	if (++mp_irq_entries == MAX_IRQ_SOURCES)
+		panic("Max # of irq sources exceeded!\n");
 
 	return;
 }
@@ -865,13 +849,22 @@ void __init mp_config_acpi_legacy_irqs (void)
 	intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
 
 	/* 
-	 * Use the default configuration for the IRQs 0-15.  These may be
+	 * Use the default configuration for the IRQs 0-15.  Unless
 	 * overridden by (MADT) interrupt source override entries.
 	 */
 	for (i = 0; i < 16; i++) {
+		int idx;
+
+		for (idx = 0; idx < mp_irq_entries; idx++)
+			if (mp_irqs[idx].mpc_srcbus == MP_ISA_BUS &&
+				(mp_irqs[idx].mpc_srcbusirq == i ||
+				mp_irqs[idx].mpc_dstirq == i))
+					break;
 
-		if (i == 2)
-			continue;			/* Don't connect IRQ2 */
+		if (idx != mp_irq_entries) {
+			printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
+			continue;			 /* IRQ already used */
+		}
 
 		intsrc.mpc_irqtype = mp_INT;
 		intsrc.mpc_srcbusirq = i;		   /* Identity mapped */

arch/x86_64/kernel/setup.c

@@ -65,8 +65,8 @@ struct cpuinfo_x86 boot_cpu_data;
 unsigned long mmu_cr4_features;
 EXPORT_SYMBOL_GPL(mmu_cr4_features);
 
-int acpi_disabled = 0;
-
+int acpi_disabled;
+EXPORT_SYMBOL(acpi_disabled);
 #ifdef	CONFIG_ACPI_BOOT
 extern int __initdata acpi_ht;
 extern acpi_interrupt_flags	acpi_sci_flags;
@@ -242,7 +242,7 @@ static __init void parse_cmdline_early (char ** cmdline_p)
 #ifdef CONFIG_ACPI_BOOT
 		/* "acpi=off" disables both ACPI table parsing and interpreter init */
 		if (!memcmp(from, "acpi=off", 8))
-			acpi_disabled = 1;
+			disable_acpi();
 
 		if (!memcmp(from, "acpi=force", 10)) { 
 			/* add later when we do DMI horrors: */
@@ -256,7 +256,9 @@ static __init void parse_cmdline_early (char ** cmdline_p)
 			acpi_ht = 1; 
 		}
                 else if (!memcmp(from, "pci=noacpi", 10)) 
-                        acpi_noirq_set();
+			acpi_disable_pci();
+		else if (!memcmp(from, "acpi=noirq", 10))
+			acpi_noirq_set();
 
 		else if (!memcmp(from, "acpi_sci=edge", 13))
 			acpi_sci_flags.trigger =  1;

drivers/acpi/osl.c

@@ -215,7 +215,8 @@ acpi_os_predefined_override (const struct acpi_predefined_names *init_val,
 
 	*new_val = NULL;
 	if (!memcmp (init_val->name, "_OS_", 4) && strlen(acpi_os_name)) {
-		printk(KERN_INFO PREFIX "Overriding _OS definition\n");
+		printk(KERN_INFO PREFIX "Overriding _OS definition %s\n",
+			acpi_os_name);
 		*new_val = acpi_os_name;
 	}
 

drivers/acpi/pci_link.c

@@ -793,7 +793,7 @@ static int __init acpi_pci_link_init (void)
 {
 	ACPI_FUNCTION_TRACE("acpi_pci_link_init");
 
-	if (acpi_disabled)
+	if (acpi_pci_disabled)
 		return_VALUE(0);
 
 	acpi_link.count = 0;

drivers/acpi/pci_root.c

@@ -119,6 +119,7 @@ acpi_pci_root_add (
 {
 	int			result = 0;
 	struct acpi_pci_root	*root = NULL;
+	struct acpi_pci_root	*tmp;
 	acpi_status		status = AE_OK;
 	unsigned long		value = 0;
 	acpi_handle		handle = NULL;
@@ -186,6 +187,13 @@ acpi_pci_root_add (
 		goto end;
 	}
 
+	/* Some systems have wrong _BBN */
+	list_for_each_entry(tmp, &acpi_pci_roots, node) {
+		if ((tmp->id.segment == root->id.segment)
+				&& (tmp->id.bus == root->id.bus))
+			ACPI_DEBUG_PRINT((ACPI_DB_ERROR, 
+				"Wrong _BBN value, please reboot and using option 'pci=noacpi'\n"));
+	}
 	/*
 	 * Device & Function
 	 * -----------------
@@ -272,7 +280,7 @@ static int __init acpi_pci_root_init (void)
 {
 	ACPI_FUNCTION_TRACE("acpi_pci_root_init");
 
-	if (acpi_disabled)
+	if (acpi_pci_disabled)
 		return_VALUE(0);
 
 	/* DEBUG:

include/asm-i386/acpi.h

@@ -109,7 +109,14 @@ extern int acpi_noirq;
 extern int acpi_strict;
 extern int acpi_disabled;
 extern int acpi_ht;
-static inline void disable_acpi(void) { acpi_disabled = 1; acpi_ht = 0; }
+extern int acpi_pci_disabled;
+static inline void disable_acpi(void) 
+{ 
+	acpi_disabled = 1; 
+	acpi_ht = 0;
+	acpi_pci_disabled = 1;
+	acpi_noirq = 1;
+}
 
 /* Fixmap pages to reserve for ACPI boot-time tables (see fixmap.h) */
 #define FIX_ACPI_PAGES 4
@@ -118,6 +125,7 @@ extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq);
 #ifdef CONFIG_X86_IO_APIC
 extern int skip_ioapic_setup;
 extern int acpi_irq_to_vector(u32 irq);	/* deprecated in favor of acpi_gsi_to_irq */
+extern int acpi_skip_timer_override;
 
 static inline void disable_ioapic_setup(void)
 {
@@ -143,9 +151,15 @@ static inline void disable_ioapic_setup(void)
 
 #ifdef CONFIG_ACPI_PCI
 static inline void acpi_noirq_set(void) { acpi_noirq = 1; }
+static inline void acpi_disable_pci(void) 
+{
+	acpi_pci_disabled = 1; 
+	acpi_noirq_set();
+}
 extern int acpi_irq_balance_set(char *str);
 #else
 static inline void acpi_noirq_set(void) { }
+static inline void acpi_disable_pci(void) { }
 static inline int acpi_irq_balance_set(char *str) { return 0; }
 #endif
 

include/asm-ia64/acpi.h

@@ -89,6 +89,7 @@ ia64_acpi_release_global_lock (unsigned int *lock)
 	((Acq) = ia64_acpi_release_global_lock((unsigned int *) GLptr))
 
 #define acpi_disabled 0	/* ACPI always enabled on IA64 */
+#define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
 #define acpi_strict 1	/* no ACPI spec workarounds on IA64 */
 static inline void disable_acpi(void) { }
 

include/asm-x86_64/acpi.h

@@ -106,8 +106,15 @@ extern int acpi_ioapic;
 extern int acpi_noirq;
 extern int acpi_strict;
 extern int acpi_disabled;
+extern int acpi_pci_disabled;
 extern int acpi_ht;
-static inline void disable_acpi(void) { acpi_disabled = 1; acpi_ht = 0; }
+static inline void disable_acpi(void) 
+{ 
+	acpi_disabled = 1; 
+	acpi_ht = 0; 
+	acpi_pci_disabled = 1;
+	acpi_noirq = 1;
+}
 
 /* Fixmap pages to reserve for ACPI boot-time tables (see fixmap.h) */
 #define FIX_ACPI_PAGES 4
@@ -121,9 +128,15 @@ extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq);
 
 #ifdef CONFIG_ACPI_PCI
 static inline void acpi_noirq_set(void) { acpi_noirq = 1; }
+static inline void acpi_disable_pci(void) 
+{
+	acpi_pci_disabled = 1; 
+	acpi_noirq_set();
+}
 extern int acpi_irq_balance_set(char *str);
 #else
 static inline void acpi_noirq_set(void) { }
+static inline void acpi_disable_pci(void) { }
 static inline int acpi_irq_balance_set(char *str) { return 0; }
 #endif
 
@@ -144,6 +157,7 @@ extern void acpi_reserve_bootmem(void);
 #define boot_cpu_physical_apicid boot_cpu_id
 
 extern int acpi_disabled;
+extern int acpi_pci_disabled;
 
 #define dmi_broken (0)
 #define BROKEN_ACPI_Sx		0x0001