Commit 30fe0f9b authored by Kalle Valo's avatar Kalle Valo

atmel: move under atmel vendor directory

Part of reorganising wireless drivers directory and Kconfig.
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent 30db0ca8
......@@ -1992,7 +1992,7 @@ L: linux-wireless@vger.kernel.org
W: http://www.thekelleys.org.uk/atmel
W: http://atmelwlandriver.sourceforge.net/
S: Maintained
F: drivers/net/wireless/atmel*
F: drivers/net/wireless/atmel/atmel*
ATMEL MAXTOUCH DRIVER
M: Nick Dyer <nick.dyer@itdev.co.uk>
......
......@@ -18,6 +18,7 @@ menuconfig WLAN
if WLAN
source "drivers/net/wireless/admtek/Kconfig"
source "drivers/net/wireless/atmel/Kconfig"
source "drivers/net/wireless/cisco/Kconfig"
config PCMCIA_RAYCS
......@@ -54,49 +55,6 @@ config LIBERTAS_THINFIRM_USB
---help---
A driver for Marvell Libertas 8388 USB devices using thinfirm.
config ATMEL
tristate "Atmel at76c50x chipset 802.11b support"
depends on CFG80211 && (PCI || PCMCIA)
select WIRELESS_EXT
select WEXT_PRIV
select FW_LOADER
select CRC32
---help---
A driver 802.11b wireless cards based on the Atmel fast-vnet
chips. This driver supports standard Linux wireless extensions.
Many cards based on this chipset do not have flash memory
and need their firmware loaded at start-up. If yours is
one of these, you will need to provide a firmware image
to be loaded into the card by the driver. The Atmel
firmware package can be downloaded from
<http://www.thekelleys.org.uk/atmel>
config PCI_ATMEL
tristate "Atmel at76c506 PCI cards"
depends on ATMEL && PCI
---help---
Enable support for PCI and mini-PCI cards containing the
Atmel at76c506 chip.
config PCMCIA_ATMEL
tristate "Atmel at76c502/at76c504 PCMCIA cards"
depends on ATMEL && PCMCIA
select WIRELESS_EXT
select FW_LOADER
select CRC32
---help---
Enable support for PCMCIA cards containing the
Atmel at76c502 and at76c504 chips.
config AT76C50X_USB
tristate "Atmel at76c503/at76c505/at76c505a USB cards"
depends on MAC80211 && USB
select FW_LOADER
---help---
Enable support for USB Wireless devices using Atmel at76c503,
at76c505 or at76c505a chips.
config PCMCIA_WL3501
tristate "Planet WL3501 PCMCIA cards"
depends on CFG80211 && PCMCIA
......
......@@ -3,6 +3,7 @@
#
obj-$(CONFIG_WLAN_VENDOR_ADMTEK) += admtek/
obj-$(CONFIG_WLAN_VENDOR_ATMEL) += atmel/
obj-$(CONFIG_WLAN_VENDOR_CISCO) += cisco/
obj-$(CONFIG_IPW2100) += ipw2x00/
......@@ -10,12 +11,6 @@ obj-$(CONFIG_IPW2200) += ipw2x00/
obj-$(CONFIG_HERMES) += orinoco/
obj-$(CONFIG_ATMEL) += atmel.o
obj-$(CONFIG_PCI_ATMEL) += atmel_pci.o
obj-$(CONFIG_PCMCIA_ATMEL) += atmel_cs.o
obj-$(CONFIG_AT76C50X_USB) += at76c50x-usb.o
obj-$(CONFIG_PRISM54) += prism54/
obj-$(CONFIG_HOSTAP) += hostap/
......
config WLAN_VENDOR_ATMEL
bool "Atmel devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_ATMEL
config ATMEL
tristate "Atmel at76c50x chipset 802.11b support"
depends on CFG80211 && (PCI || PCMCIA)
select WIRELESS_EXT
select WEXT_PRIV
select FW_LOADER
select CRC32
---help---
A driver 802.11b wireless cards based on the Atmel fast-vnet
chips. This driver supports standard Linux wireless extensions.
Many cards based on this chipset do not have flash memory
and need their firmware loaded at start-up. If yours is
one of these, you will need to provide a firmware image
to be loaded into the card by the driver. The Atmel
firmware package can be downloaded from
<http://www.thekelleys.org.uk/atmel>
config PCI_ATMEL
tristate "Atmel at76c506 PCI cards"
depends on ATMEL && PCI
---help---
Enable support for PCI and mini-PCI cards containing the
Atmel at76c506 chip.
config PCMCIA_ATMEL
tristate "Atmel at76c502/at76c504 PCMCIA cards"
depends on ATMEL && PCMCIA
select WIRELESS_EXT
select FW_LOADER
select CRC32
---help---
Enable support for PCMCIA cards containing the
Atmel at76c502 and at76c504 chips.
config AT76C50X_USB
tristate "Atmel at76c503/at76c505/at76c505a USB cards"
depends on MAC80211 && USB
select FW_LOADER
---help---
Enable support for USB Wireless devices using Atmel at76c503,
at76c505 or at76c505a chips.
endif # WLAN_VENDOR_ATMEL
obj-$(CONFIG_ATMEL) += atmel.o
obj-$(CONFIG_PCI_ATMEL) += atmel_pci.o
obj-$(CONFIG_PCMCIA_ATMEL) += atmel_cs.o
obj-$(CONFIG_AT76C50X_USB) += at76c50x-usb.o
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment