IB/qib: Ensure that LOS and DFE are being turned off

Due to timing, it is possible for the LOS and DFE to remain on. This
is due to the link progressing to LinkUP prior to the driver getting
the first Status Changed interrupt.  By expanding the conditions under
which LOS is turned off and DFE timeout is being set, timing is no
longer an issue.
Signed-off-by: Mitko Haralanov <mitko@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

drivers/infiniband/hw/qib/qib_iba7322.c

@@ -469,6 +469,8 @@ static u8 ib_rate_to_delay[IB_RATE_120_GBPS + 1] = {
 #define IB_7322_LT_STATE_RECOVERIDLE     0x0f
 #define IB_7322_LT_STATE_CFGENH          0x10
 #define IB_7322_LT_STATE_CFGTEST         0x11
+#define IB_7322_LT_STATE_CFGWAITRMTTEST  0x12
+#define IB_7322_LT_STATE_CFGWAITENH      0x13
 
 /* link state machine states from IBC */
 #define IB_7322_L_STATE_DOWN             0x0
@@ -498,8 +500,10 @@ static const u8 qib_7322_physportstate[0x20] = {
 		IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
 	[IB_7322_LT_STATE_CFGENH] = IB_PHYSPORTSTATE_CFG_ENH,
 	[IB_7322_LT_STATE_CFGTEST] = IB_PHYSPORTSTATE_CFG_TRAIN,
-	[0x12] = IB_PHYSPORTSTATE_CFG_TRAIN,
-	[0x13] = IB_PHYSPORTSTATE_CFG_WAIT_ENH,
+	[IB_7322_LT_STATE_CFGWAITRMTTEST] =
+		IB_PHYSPORTSTATE_CFG_TRAIN,
+	[IB_7322_LT_STATE_CFGWAITENH] =
+		IB_PHYSPORTSTATE_CFG_WAIT_ENH,
 	[0x14] = IB_PHYSPORTSTATE_CFG_TRAIN,
 	[0x15] = IB_PHYSPORTSTATE_CFG_TRAIN,
 	[0x16] = IB_PHYSPORTSTATE_CFG_TRAIN,
@@ -1692,7 +1696,9 @@ static void handle_serdes_issues(struct qib_pportdata *ppd, u64 ibcst)
 		break;
 	}
 
-	if (ibclt == IB_7322_LT_STATE_CFGTEST &&
+	if (((ibclt >= IB_7322_LT_STATE_CFGTEST &&
+	      ibclt <= IB_7322_LT_STATE_CFGWAITENH) ||
+	     ibclt == IB_7322_LT_STATE_LINKUP) &&
 	    (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR))) {
 		force_h1(ppd);
 		ppd->cpspec->qdr_reforce = 1;
@@ -7301,12 +7307,17 @@ static void ibsd_wr_allchans(struct qib_pportdata *ppd, int addr, unsigned data,
 static void serdes_7322_los_enable(struct qib_pportdata *ppd, int enable)
 {
 	u64 data = qib_read_kreg_port(ppd, krp_serdesctrl);
-	printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS %s\n",
-		ppd->dd->unit, ppd->port, (enable ? "on" : "off"));
-	if (enable)
+	u8 state = SYM_FIELD(data, IBSerdesCtrl_0, RXLOSEN);
+
+	if (enable && !state) {
+		printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS on\n",
+			ppd->dd->unit, ppd->port);
 		data |= SYM_MASK(IBSerdesCtrl_0, RXLOSEN);
-	else
+	} else if (!enable && state) {
+		printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS off\n",
+			ppd->dd->unit, ppd->port);
 		data &= ~SYM_MASK(IBSerdesCtrl_0, RXLOSEN);
+	}
 	qib_write_kreg_port(ppd, krp_serdesctrl, data);
 }
 

drivers/infiniband/hw/qib/qib_intr.c

@@ -96,8 +96,12 @@ void qib_handle_e_ibstatuschanged(struct qib_pportdata *ppd, u64 ibcs)
 	 * states, or if it transitions from any of the up (INIT or better)
 	 * states into any of the down states (except link recovery), then
 	 * call the chip-specific code to take appropriate actions.
+	 *
+	 * ppd->lflags could be 0 if this is the first time the interrupt
+	 * handlers has been called but the link is already up.
 	 */
-	if (lstate >= IB_PORT_INIT && (ppd->lflags & QIBL_LINKDOWN) &&
+	if (lstate >= IB_PORT_INIT &&
+	    (!ppd->lflags || (ppd->lflags & QIBL_LINKDOWN)) &&
 	    ltstate == IB_PHYSPORTSTATE_LINKUP) {
 		/* transitioned to UP */
 		if (dd->f_ib_updown(ppd, 1, ibcs))