mmc: core: apply NO_CMD23 quirk to some specific cards

commit 91516a2a upstream.

To get an usdhc Apacer and some ATP SD cards work reliable, CMD23 needs
to be disabled.  This has been tested on i.MX6 (sdhci-esdhc) and rk3288
(dw_mmc-rockchip).

Without this patch on i.MX6 (sdhci-esdhc):

 $ dd if=/dev/urandom of=/mnt/test bs=1M count=10 conv=fsync

    | <mmc0: starting CMD23 arg 00000400 flags 00000015>
    | mmc0: starting CMD25 arg 00a71f00 flags 000000b5
    | mmc0:     blksz 512 blocks 1024 flags 00000100 tsac 3000 ms nsac 0
    | mmc0:     CMD12 arg 00000000 flags 0000049d
    | sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
    | mmc0: Timeout waiting for hardware interrupt.

Without this patch on rk3288 (dw_mmc-rockchip):

    | mmc1: Card stuck in programming state! mmcblk1 card_busy_detect
    | dwmmc_rockchip ff0c0000.dwmmc: Busy; trying anyway
    | mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,
    | actual 400000HZ div = 0)
    | mmc1: card never left busy state
    | mmc1: tried to reset card, got error -110
    | blk_update_request: I/O error, dev mmcblk1, sector 139778
    | Buffer I/O error on dev mmcblk1p1, logical block 131586, lost async
    | page write
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/mmc/core/card.h

@@ -75,9 +75,11 @@ struct mmc_fixup {
 #define EXT_CSD_REV_ANY (-1u)
 
 #define CID_MANFID_SANDISK      0x2
+#define CID_MANFID_ATP          0x9
 #define CID_MANFID_TOSHIBA      0x11
 #define CID_MANFID_MICRON       0x13
 #define CID_MANFID_SAMSUNG      0x15
+#define CID_MANFID_APACER       0x27
 #define CID_MANFID_KINGSTON     0x70
 #define CID_MANFID_HYNIX	0x90
 

drivers/mmc/core/quirks.h

@@ -52,6 +52,14 @@ static const struct mmc_fixup mmc_blk_fixups[] = {
 	MMC_FIXUP("MMC32G", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc,
 		  MMC_QUIRK_BLK_NO_CMD23),
 
+	/*
+	 * Some SD cards lockup while using CMD23 multiblock transfers.
+	 */
+	MMC_FIXUP("AF SD", CID_MANFID_ATP, CID_OEMID_ANY, add_quirk_sd,
+		  MMC_QUIRK_BLK_NO_CMD23),
+	MMC_FIXUP("APUSD", CID_MANFID_APACER, 0x5048, add_quirk_sd,
+		  MMC_QUIRK_BLK_NO_CMD23),
+
 	/*
 	 * Some MMC cards need longer data read timeout than indicated in CSD.
 	 */