net: dsa: realtek-smi: move to subdirectory

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS

@@ -16352,8 +16352,7 @@ REALTEK RTL83xx SMI DSA ROUTER CHIPS
 M:	Linus Walleij <linus.walleij@linaro.org>
 S:	Maintained
 F:	Documentation/devicetree/bindings/net/dsa/realtek-smi.txt
-F:	drivers/net/dsa/realtek-smi*
-F:	drivers/net/dsa/rtl83*
+F:	drivers/net/dsa/realtek/*
 
 REALTEK WIRELESS DRIVER (rtlwifi family)
 M:	Ping-Ke Shih <pkshih@realtek.com>

drivers/net/dsa/Kconfig

@@ -67,17 +67,7 @@ config NET_DSA_QCA8K
 	  This enables support for the Qualcomm Atheros QCA8K Ethernet
 	  switch chips.
 
-config NET_DSA_REALTEK_SMI
-	tristate "Realtek SMI Ethernet switch family support"
-	select NET_DSA_TAG_RTL4_A
-	select NET_DSA_TAG_RTL8_4
-	select FIXED_PHY
-	select IRQ_DOMAIN
-	select REALTEK_PHY
-	select REGMAP
-	help
-	  This enables support for the Realtek SMI-based switch
-	  chips, currently only RTL8366RB.
+source "drivers/net/dsa/realtek/Kconfig"
 
 config NET_DSA_SMSC_LAN9303
 	tristate

drivers/net/dsa/Makefile

@@ -9,8 +9,6 @@ obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
 obj-$(CONFIG_NET_DSA_MT7530)	+= mt7530.o
 obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
 obj-$(CONFIG_NET_DSA_QCA8K)	+= qca8k.o
-obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek-smi.o
-realtek-smi-objs		:= realtek-smi-core.o rtl8366.o rtl8366rb.o rtl8365mb.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o
@@ -23,5 +21,6 @@ obj-y				+= microchip/
 obj-y				+= mv88e6xxx/
 obj-y				+= ocelot/
 obj-y				+= qca/
+obj-y				+= realtek/
 obj-y				+= sja1105/
 obj-y				+= xrs700x/

drivers/net/dsa/realtek/Kconfig

+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig NET_DSA_REALTEK
+	tristate "Realtek Ethernet switch family support"
+	depends on NET_DSA
+	select NET_DSA_TAG_RTL4_A
+	select NET_DSA_TAG_RTL8_4
+	select FIXED_PHY
+	select IRQ_DOMAIN
+	select REALTEK_PHY
+	select REGMAP
+	help
+	  Select to enable support for Realtek Ethernet switch chips.
+
+config NET_DSA_REALTEK_SMI
+	tristate "Realtek SMI connected switch driver"
+	depends on NET_DSA_REALTEK
+	default y
+	help
+	  Select to enable support for registering switches connected
+	  through SMI.

drivers/net/dsa/realtek/Makefile

+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_NET_DSA_REALTEK_SMI) 	+= realtek-smi.o
+realtek-smi-objs			:= realtek-smi-core.o rtl8366.o rtl8366rb.o rtl8365mb.o