iwlwifi: mvm: fix some kernel-doc

This mostly fixes missing tags/struct names, but also some other
things. Lots of issues remain though.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

drivers/net/wireless/intel/iwlwifi/iwl-fw-file.h

@@ -395,8 +395,8 @@ enum iwl_ucode_tlv_capa {
 #define IWL_UCODE_API(ver)	(((ver) & 0x0000FF00) >> 8)
 #define IWL_UCODE_SERIAL(ver)	((ver) & 0x000000FF)
 
-/*
- * Calibration control struct.
+/**
+ * struct iwl_tlv_calib_ctrl - Calibration control struct.
  * Sent as part of the phy configuration command.
  * @flow_trigger: bitmap for which calibrations to perform according to
  *		flow triggers.

drivers/net/wireless/intel/iwlwifi/mvm/fw-api-power.h

@@ -411,7 +411,7 @@ struct iwl_geo_tx_power_profiles_cmd {
  *      Threshold. Typical energy threshold is -72dBm.
  * @bf_temp_threshold: This threshold determines the type of temperature
  *	filtering (Slow or Fast) that is selected (Units are in Celsuis):
- *      If the current temperature is above this threshold - Fast filter
+ *	If the current temperature is above this threshold - Fast filter
  *	will be used, If the current temperature is below this threshold -
  *	Slow filter will be used.
  * @bf_temp_fast_filter: Send Beacon to driver if delta in temperature values

drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rx.h

@@ -147,7 +147,8 @@ enum iwl_csum_rx_assist_info {
 
 /**
  * struct iwl_rx_mpdu_res_start - phy info
- * @assist: see CSUM_RX_ASSIST_ above
+ * @byte_count: byte count of the frame
+ * @assist: see &enum iwl_csum_rx_assist_info
  */
 struct iwl_rx_mpdu_res_start {
 	__le16 byte_count;
@@ -447,7 +448,7 @@ struct iwl_rxq_sync_notification {
 } __packed; /* MULTI_QUEUE_DRV_SYNC_HDR_CMD_API_S_VER_1 */
 
 /**
- * Internal message identifier
+ * enum iwl_mvm_rxq_notif_type - Internal message identifier
  *
  * @IWL_MVM_RXQ_EMPTY: empty sync notification
  * @IWL_MVM_RXQ_NOTIF_DEL_BA: notify RSS queues of delBA
@@ -491,7 +492,7 @@ enum iwl_mvm_pm_event {
 /**
  * struct iwl_mvm_pm_state_notification - station PM state notification
  * @sta_id: station ID of the station changing state
- * @type: the new powersave state, see IWL_MVM_PM_EVENT_ above
+ * @type: the new powersave state, see &enum iwl_mvm_pm_event
  */
 struct iwl_mvm_pm_state_notification {
 	u8 sta_id;

drivers/net/wireless/intel/iwlwifi/mvm/fw-api-scan.h

@@ -7,7 +7,7 @@
  *
  * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
  * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
- * Copyright(c) 2016 Intel Deutschland GmbH
+ * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -34,6 +34,7 @@
  *
  * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
  * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
+ * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -111,7 +112,7 @@ enum scan_framework_client {
 };
 
 /**
- * iwl_scan_offload_blacklist - SCAN_OFFLOAD_BLACKLIST_S
+ * struct iwl_scan_offload_blacklist - SCAN_OFFLOAD_BLACKLIST_S
  * @ssid:		MAC address to filter out
  * @reported_rssi:	AP rssi reported to the host
  * @client_bitmap: clients ignore this entry  - enum scan_framework_client
@@ -135,7 +136,7 @@ enum iwl_scan_offload_band_selection {
 };
 
 /**
- * iwl_scan_offload_profile - SCAN_OFFLOAD_PROFILE_S
+ * struct iwl_scan_offload_profile - SCAN_OFFLOAD_PROFILE_S
  * @ssid_index:		index to ssid list in fixed part
  * @unicast_cipher:	encryption algorithm to match - bitmap
  * @aut_alg:		authentication algorithm to match - bitmap
@@ -154,8 +155,7 @@ struct iwl_scan_offload_profile {
 } __packed;
 
 /**
- * iwl_scan_offload_profile_cfg - SCAN_OFFLOAD_PROFILES_CFG_API_S_VER_1
- * @blaclist:		AP list to filter off from scan results
+ * struct iwl_scan_offload_profile_cfg - SCAN_OFFLOAD_PROFILES_CFG_API_S_VER_1
  * @profiles:		profiles to search for match
  * @blacklist_len:	length of blacklist
  * @num_profiles:	num of profiles in the list
@@ -176,7 +176,7 @@ struct iwl_scan_offload_profile_cfg {
 } __packed;
 
 /**
- * iwl_scan_schedule_lmac - schedule of scan offload
+ * struct iwl_scan_schedule_lmac - schedule of scan offload
  * @delay:		delay between iterations, in seconds.
  * @iterations:		num of scan iterations
  * @full_scan_mul:	number of partial scans before each full scan
@@ -200,7 +200,7 @@ enum iwl_scan_ebs_status {
 };
 
 /**
- * iwl_scan_req_tx_cmd - SCAN_REQ_TX_CMD_API_S
+ * struct iwl_scan_req_tx_cmd - SCAN_REQ_TX_CMD_API_S
  * @tx_flags: combination of TX_CMD_FLG_*
  * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
  *	cleared. Combination of RATE_MCS_*
@@ -220,7 +220,7 @@ enum iwl_scan_channel_flags_lmac {
 };
 
 /**
- * iwl_scan_channel_cfg_lmac - SCAN_CHANNEL_CFG_S_VER2
+ * struct iwl_scan_channel_cfg_lmac - SCAN_CHANNEL_CFG_S_VER2
  * @flags:		bits 1-20: directed scan to i'th ssid
  *			other bits &enum iwl_scan_channel_flags_lmac
  * @channel_number:	channel number 1-13 etc
@@ -235,7 +235,7 @@ struct iwl_scan_channel_cfg_lmac {
 } __packed;
 
 /*
- * iwl_scan_probe_segment - PROBE_SEGMENT_API_S_VER_1
+ * struct iwl_scan_probe_segment - PROBE_SEGMENT_API_S_VER_1
  * @offset: offset in the data block
  * @len: length of the segment
  */
@@ -263,7 +263,7 @@ enum iwl_scan_channel_flags {
 	IWL_SCAN_CHANNEL_FLAG_CACHE_ADD		= BIT(2),
 };
 
-/* iwl_scan_channel_opt - CHANNEL_OPTIMIZATION_API_S
+/* struct iwl_scan_channel_opt - CHANNEL_OPTIMIZATION_API_S
  * @flags: enum iwl_scan_channel_flags
  * @non_ebs_ratio: defines the ratio of number of scan iterations where EBS is
  *	involved.
@@ -276,7 +276,7 @@ struct iwl_scan_channel_opt {
 } __packed;
 
 /**
- * iwl_mvm_lmac_scan_flags
+ * enum iwl_mvm_lmac_scan_flags - LMAC scan flags
  * @IWL_MVM_LMAC_SCAN_FLAG_PASS_ALL: pass all beacons and probe responses
  *	without filtering.
  * @IWL_MVM_LMAC_SCAN_FLAG_PASSIVE: force passive scan on all channels
@@ -320,7 +320,7 @@ enum iwl_scan_priority_ext {
 };
 
 /**
- * iwl_scan_req_lmac - SCAN_REQUEST_CMD_API_S_VER_1
+ * struct iwl_scan_req_lmac - SCAN_REQUEST_CMD_API_S_VER_1
  * @reserved1: for alignment and future use
  * @channel_num: num of channels to scan
  * @active-dwell: dwell time for active channels
@@ -410,7 +410,7 @@ struct iwl_lmac_scan_complete_notif {
 } __packed;
 
 /**
- * iwl_scan_offload_complete - PERIODIC_SCAN_COMPLETE_NTF_API_S_VER_2
+ * struct iwl_scan_offload_complete - PERIODIC_SCAN_COMPLETE_NTF_API_S_VER_2
  * @last_schedule_line: last schedule line executed (fast or regular)
  * @last_schedule_iteration: last scan iteration executed before scan abort
  * @status: enum iwl_scan_offload_complete_status
@@ -547,12 +547,12 @@ struct iwl_scan_config {
 } __packed; /* SCAN_CONFIG_DB_CMD_API_S_3 */
 
 /**
- * iwl_umac_scan_flags
- *@IWL_UMAC_SCAN_FLAG_PREEMPTIVE: scan process triggered by this scan request
+ * enum iwl_umac_scan_flags - UMAC scan flags
+ * @IWL_UMAC_SCAN_FLAG_PREEMPTIVE: scan process triggered by this scan request
  *	can be preempted by other scan requests with higher priority.
  *	The low priority scan will be resumed when the higher proirity scan is
  *	completed.
- *@IWL_UMAC_SCAN_FLAG_START_NOTIF: notification will be sent to the driver
+ * @IWL_UMAC_SCAN_FLAG_START_NOTIF: notification will be sent to the driver
  *	when scan starts.
  */
 enum iwl_umac_scan_flags {

drivers/net/wireless/intel/iwlwifi/mvm/fw-api-sta.h

@@ -223,7 +223,7 @@ enum iwl_sta_sleep_flag {
 
 /**
  * struct iwl_mvm_keyinfo - key information
- * @key_flags: type %iwl_sta_key_flag
+ * @key_flags: type &enum iwl_sta_key_flag
  * @tkip_rx_tsc_byte2: TSC[2] for key mix ph1 detection
  * @tkip_rx_ttak: 10-byte unicast TKIP TTAK for Rx
  * @key_offset: key offset in the fw's key table
@@ -258,12 +258,13 @@ struct iwl_mvm_keyinfo {
  * @tid_disable_tx: is tid BIT(tid) enabled for Tx. Clear BIT(x) to enable
  *	AMPDU for tid x. Set %STA_MODIFY_TID_DISABLE_TX to change this field.
  * @mac_id_n_color: the Mac context this station belongs to
- * @addr[ETH_ALEN]: station's MAC address
+ * @addr: station's MAC address
  * @sta_id: index of station in uCode's station table
  * @modify_mask: STA_MODIFY_*, selects which parameters to modify vs. leave
  *	alone. 1 - modify, 0 - don't change.
- * @station_flags: look at %iwl_sta_flags
- * @station_flags_msk: what of %station_flags have changed
+ * @station_flags: look at &enum iwl_sta_flags
+ * @station_flags_msk: what of %station_flags have changed,
+ *	also &enum iwl_sta_flags
  * @add_immediate_ba_tid: tid for which to add block-ack support (Rx)
  *	Set %STA_MODIFY_ADD_BA_TID to use this field, and also set
  *	add_immediate_ba_ssn.
@@ -274,7 +275,7 @@ struct iwl_mvm_keyinfo {
  * @sleep_tx_count: number of packets to transmit to station even though it is
  *	asleep. Used to synchronise PS-poll and u-APSD responses while ucode
  *	keeps track of STA sleep state.
- * @sleep_state_flags: Look at %iwl_sta_sleep_flag.
+ * @sleep_state_flags: Look at &enum iwl_sta_sleep_flag.
  * @assoc_id: assoc_id to be sent in VHT PLCP (9-bit), for grp use 0, for AP
  *	mac-addr.
  * @beamform_flags: beam forming controls
@@ -335,12 +336,13 @@ enum iwl_sta_type {
  * @tid_disable_tx: is tid BIT(tid) enabled for Tx. Clear BIT(x) to enable
  *	AMPDU for tid x. Set %STA_MODIFY_TID_DISABLE_TX to change this field.
  * @mac_id_n_color: the Mac context this station belongs to
- * @addr[ETH_ALEN]: station's MAC address
+ * @addr: station's MAC address
  * @sta_id: index of station in uCode's station table
  * @modify_mask: STA_MODIFY_*, selects which parameters to modify vs. leave
  *	alone. 1 - modify, 0 - don't change.
- * @station_flags: look at %iwl_sta_flags
- * @station_flags_msk: what of %station_flags have changed
+ * @station_flags: look at &enum iwl_sta_flags
+ * @station_flags_msk: what of %station_flags have changed,
+ *	also &enum iwl_sta_flags
  * @add_immediate_ba_tid: tid for which to add block-ack support (Rx)
  *	Set %STA_MODIFY_ADD_BA_TID to use this field, and also set
  *	add_immediate_ba_ssn.
@@ -352,7 +354,7 @@ enum iwl_sta_type {
  *	asleep. Used to synchronise PS-poll and u-APSD responses while ucode
  *	keeps track of STA sleep state.
  * @station_type: type of this station. See &enum iwl_sta_type.
- * @sleep_state_flags: Look at %iwl_sta_sleep_flag.
+ * @sleep_state_flags: Look at &enum iwl_sta_sleep_flag.
  * @assoc_id: assoc_id to be sent in VHT PLCP (9-bit), for grp use 0, for AP
  *	mac-addr.
  * @beamform_flags: beam forming controls
@@ -401,7 +403,7 @@ struct iwl_mvm_add_sta_cmd {
  * ( REPLY_ADD_STA_KEY = 0x17 )
  * @sta_id: index of station in uCode's station table
  * @key_offset: key offset in key storage
- * @key_flags: type %iwl_sta_key_flag
+ * @key_flags: type &enum iwl_sta_key_flag
  * @key: key material data
  * @rx_secur_seq_cnt: RX security sequence counter for the key
  */

drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h

@@ -595,9 +595,10 @@ struct iwl_mvm_tx_resp {
  * struct iwl_mvm_ba_notif - notifies about reception of BA
  * ( BA_NOTIF = 0xc5 )
  * @sta_addr: MAC address
+ * @reserved: reserved
  * @sta_id: Index of recipient (BA-sending) station in fw's station table
  * @tid: tid of the session
- * @seq_ctl:
+ * @seq_ctl: sequence control field
  * @bitmap: the bitmap of the BA notification as seen in the air
  * @scd_flow: the tx queue this BA relates to
  * @scd_ssn: the index of the last contiguously sent packet
@@ -606,6 +607,7 @@ struct iwl_mvm_tx_resp {
  * @reduced_txp: power reduced according to TPC. This is the actual value and
  *	not a copy from the LQ command. Thus, if not the first rate was used
  *	for Tx-ing then this value will be set to 0 by FW.
+ * @reserved1: reserved
  */
 struct iwl_mvm_ba_notif {
 	u8 sta_addr[ETH_ALEN];
@@ -628,13 +630,13 @@ struct iwl_mvm_ba_notif {
  * @q_num: TFD queue number
  * @tfd_index: Index of first un-acked frame in the  TFD queue
  * @scd_queue: For debug only - the physical queue the TFD queue is bound to
+ * @reserved: reserved for alignment
  */
 struct iwl_mvm_compressed_ba_tfd {
 	__le16 q_num;
 	__le16 tfd_index;
 	u8 scd_queue;
-	u8 reserved;
-	__le16 reserved2;
+	u8 reserved[3];
 } __packed; /* COMPRESSED_BA_TFD_API_S_VER_1 */
 
 /**
@@ -682,11 +684,12 @@ enum iwl_mvm_ba_resp_flags {
  * @query_frame_cnt: SCD query frame count
  * @txed: number of frames sent in the aggregation (all-TIDs)
  * @done: number of frames that were Acked by the BA (all-TIDs)
+ * @reserved: reserved (for alignment)
  * @wireless_time: Wireless-media time
  * @tx_rate: the rate the aggregation was sent at
  * @tfd_cnt: number of TFD-Q elements
  * @ra_tid_cnt: number of RATID-Q elements
- * @ba_tfd: array of TFD queue status updates. See &iwl_mvm_compressed_ba_tfd
+ * @tfd: array of TFD queue status updates. See &iwl_mvm_compressed_ba_tfd
  *	for details.
  * @ra_tid: array of RA-TID queue status updates. For debug purposes only. See
  *	&iwl_mvm_compressed_ba_ratid for more details.
@@ -760,6 +763,7 @@ struct iwl_mac_beacon_cmd_v7 {
  * struct iwl_mac_beacon_cmd - beacon template command with offloaded CSA
  * @byte_cnt: byte count of the beacon frame
  * @flags: for future use
+ * @reserved: reserved
  * @data: see &iwl_mac_beacon_cmd_data
  */
 struct iwl_mac_beacon_cmd {
@@ -819,9 +823,9 @@ enum iwl_scd_cfg_actions {
 
 /**
  * struct iwl_scd_txq_cfg_cmd - New txq hw scheduler config command
- * @token:
+ * @token: unused
  * @sta_id: station id
- * @tid:
+ * @tid: TID
  * @scd_queue: scheduler queue to confiug
  * @action: 1 queue enable, 0 queue disable, 2 change txq's tid owner
  *	Value is one of %iwl_scd_cfg_actions options
@@ -829,6 +833,7 @@ enum iwl_scd_cfg_actions {
  * @tx_fifo: %enum iwl_mvm_tx_fifo
  * @window: BA window size
  * @ssn: SSN for the BA agreement
+ * @reserved: reserved
  */
 struct iwl_scd_txq_cfg_cmd {
 	u8 token;

drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h

@@ -412,13 +412,13 @@ struct iwl_tx_ant_cfg_cmd {
 	__le32 valid;
 } __packed;
 
-/*
- * Calibration control struct.
+/**
+ * struct iwl_calib_ctrl - Calibration control struct.
  * Sent as part of the phy configuration command.
  * @flow_trigger: bitmap for which calibrations to perform according to
- *		flow triggers.
+ *		flow triggers, using &enum iwl_calib_cfg
  * @event_trigger: bitmap for which calibrations to perform according to
- *		event triggers.
+ *		event triggers, using &enum iwl_calib_cfg
  */
 struct iwl_calib_ctrl {
 	__le32 flow_trigger;
@@ -450,8 +450,10 @@ enum iwl_calib_cfg {
 	IWL_CALIB_CFG_AGC_IDX			= BIT(18),
 };
 
-/*
- * Phy configuration command.
+/**
+ * struct iwl_phy_cfg_cmd - Phy configuration command
+ * @phy_cfg: PHY configuration value, uses &enum iwl_fw_phy_cfg
+ * @calib_control: calibration control data
  */
 struct iwl_phy_cfg_cmd {
 	__le32	phy_cfg;
@@ -1576,8 +1578,8 @@ enum iwl_sf_scenario {
 #define SF_CFG_DUMMY_NOTIF_OFF	BIT(16)
 
 /**
- * Smart Fifo configuration command.
- * @state: smart fifo state, types listed in enum %iwl_sf_sate.
+ * struct iwl_sf_cfg_cmd - Smart Fifo configuration command.
+ * @state: smart fifo state, types listed in &enum iwl_sf_state.
  * @watermark: Minimum allowed availabe free space in RXF for transient state.
  * @long_delay_timeouts: aging and idle timer values for each scenario
  * in long delay state.
@@ -1631,7 +1633,7 @@ struct iwl_mcc_update_cmd {
 } __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_2 */
 
 /**
- * iwl_mcc_update_resp_v1  - response to MCC_UPDATE_CMD.
+ * struct iwl_mcc_update_resp_v1  - response to MCC_UPDATE_CMD.
  * Contains the new channel control profile map, if changed, and the new MCC
  * (mobile country code).
  * The new MCC may be different than what was requested in MCC_UPDATE_CMD.
@@ -1654,7 +1656,7 @@ struct iwl_mcc_update_resp_v1  {
 } __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_1 */
 
 /**
- * iwl_mcc_update_resp - response to MCC_UPDATE_CMD.
+ * struct iwl_mcc_update_resp - response to MCC_UPDATE_CMD.
  * Contains the new channel control profile map, if changed, and the new MCC
  * (mobile country code).
  * The new MCC may be different than what was requested in MCC_UPDATE_CMD.
@@ -1736,10 +1738,10 @@ enum iwl_dts_measurement_flags {
 };
 
 /**
- * iwl_dts_measurement_cmd - request DTS temperature and/or voltage measurements
+ * struct iwl_dts_measurement_cmd - request DTS temp and/or voltage measurements
  *
- * @flags: indicates which measurements we want as specified in &enum
- *	   iwl_dts_measurement_flags
+ * @flags: indicates which measurements we want as specified in
+ *	&enum iwl_dts_measurement_flags
  */
 struct iwl_dts_measurement_cmd {
 	__le32 flags;
@@ -1791,7 +1793,7 @@ enum iwl_dts_bit_mode {
 };
 
 /**
- * iwl_ext_dts_measurement_cmd - request extended DTS temperature measurements
+ * struct iwl_ext_dts_measurement_cmd - request extended DTS temp measurements
  * @control_mode: see &enum iwl_dts_control_measurement_mode
  * @temperature: used when over write DTS mode is selected
  * @sensor: set temperature sensor to use. See &enum iwl_dts_used
@@ -1871,7 +1873,7 @@ struct iwl_mvm_ctdp_cmd {
 #define IWL_MAX_DTS_TRIPS	8
 
 /**
- * struct iwl_temp_report_ths_cmd - set temperature thresholds
+ * struct temp_report_ths_cmd - set temperature thresholds
  *
  * @num_temps: number of temperature thresholds passed
  * @thresholds: array with the thresholds to be configured
@@ -1893,7 +1895,7 @@ enum iwl_tdls_channel_switch_type {
 }; /* TDLS_STA_CHANNEL_SWITCH_CMD_TYPE_API_E_VER_1 */
 
 /**
- * Switch timing sub-element in a TDLS channel-switch command
+ * struct iwl_tdls_channel_switch_timing - Switch timing in TDLS channel-switch
  * @frame_timestamp: GP2 timestamp of channel-switch request/response packet
  *	received from peer
  * @max_offchan_duration: What amount of microseconds out of a DTIM is given
@@ -1913,7 +1915,7 @@ struct iwl_tdls_channel_switch_timing {
 #define IWL_TDLS_CH_SW_FRAME_MAX_SIZE 200
 
 /**
- * TDLS channel switch frame template
+ * struct iwl_tdls_channel_switch_frame - TDLS channel switch frame template
  *
  * A template representing a TDLS channel-switch request or response frame
  *
@@ -1928,7 +1930,7 @@ struct iwl_tdls_channel_switch_frame {
 } __packed; /* TDLS_STA_CHANNEL_SWITCH_FRAME_API_S_VER_1 */
 
 /**
- * TDLS channel switch command
+ * struct iwl_tdls_channel_switch_cmd - TDLS channel switch command
  *
  * The command is sent to initiate a channel switch and also in response to
  * incoming TDLS channel-switch request/response packets from remote peers.
@@ -1948,7 +1950,7 @@ struct iwl_tdls_channel_switch_cmd {
 } __packed; /* TDLS_STA_CHANNEL_SWITCH_CMD_API_S_VER_1 */
 
 /**
- * TDLS channel switch start notification
+ * struct iwl_tdls_channel_switch_notif - TDLS channel switch start notification
  *
  * @status: non-zero on success
  * @offchannel_duration: duration given in microseconds
@@ -1961,7 +1963,7 @@ struct iwl_tdls_channel_switch_notif {
 } __packed; /* TDLS_STA_CHANNEL_SWITCH_NTFY_API_S_VER_1 */
 
 /**
- * TDLS station info
+ * struct iwl_tdls_sta_info - TDLS station info
  *
  * @sta_id: station id of the TDLS peer
  * @tx_to_peer_tid: TID reserved vs. the peer for FW based Tx
@@ -1976,7 +1978,7 @@ struct iwl_tdls_sta_info {
 } __packed; /* TDLS_STA_INFO_VER_1 */
 
 /**
- * TDLS basic config command
+ * struct iwl_tdls_config_cmd - TDLS basic config command
  *
  * @id_and_color: MAC id and color being configured
  * @tdls_peer_count: amount of currently connected TDLS peers
@@ -2000,7 +2002,7 @@ struct iwl_tdls_config_cmd {
 } __packed; /* TDLS_CONFIG_CMD_API_S_VER_1 */
 
 /**
- * TDLS per-station config information from FW
+ * struct iwl_tdls_config_sta_info_res - TDLS per-station config information
  *
  * @sta_id: station id of the TDLS peer
  * @tx_to_peer_last_seq: last sequence number used by FW during FW-based Tx to
@@ -2012,7 +2014,7 @@ struct iwl_tdls_config_sta_info_res {
 } __packed; /* TDLS_STA_INFO_RSP_VER_1 */
 
 /**
- * TDLS config information from FW
+ * struct iwl_tdls_config_res - TDLS config information from FW
  *
  * @tx_to_ap_last_seq: last sequence number used by FW during FW-based Tx to AP
  * @sta_info: per-station TDLS config information
@@ -2028,7 +2030,7 @@ struct iwl_tdls_config_res {
 #define TX_FIFO_INTERNAL_MAX_NUM	6
 
 /**
- * Shared memory configuration information from the FW
+ * struct iwl_shared_mem_cfg_v1 - Shared memory configuration information
  *
  * @shared_mem_addr: shared memory addr (pre 8000 HW set to 0x0 as MARBH is not
  *	accessible)
@@ -2082,7 +2084,7 @@ struct iwl_shared_mem_lmac_cfg {
 } __packed; /* SHARED_MEM_ALLOC_LMAC_API_S_VER_1 */
 
 /**
- * Shared memory configuration information from the FW
+ * struct iwl_shared_mem_cfg - Shared memory configuration information
  *
  * @shared_mem_addr: shared memory address
  * @shared_mem_size: shared memory size
@@ -2110,7 +2112,7 @@ struct iwl_shared_mem_cfg {
 } __packed; /* SHARED_MEM_ALLOC_API_S_VER_3 */
 
 /**
- * VHT MU-MIMO group configuration
+ * struct iwl_mu_group_mgmt_cmd - VHT MU-MIMO group configuration
  *
  * @membership_status: a bitmap of MU groups
  * @user_position:the position of station in a group. If the station is in the
@@ -2137,7 +2139,7 @@ struct iwl_mu_group_mgmt_notif {
 #define MAX_STORED_BEACON_SIZE 600
 
 /**
- * Stored beacon notification
+ * struct iwl_stored_beacon_notif - Stored beacon notification
  *
  * @system_time: system time on air rise
  * @tsf: TSF on air rise
@@ -2172,7 +2174,7 @@ enum iwl_lqm_status {
 };
 
 /**
- * Link Quality Measurement command
+ * struct iwl_link_qual_msrmnt_cmd - Link Quality Measurement command
  * @cmd_operatrion: command operation to be performed (start or stop)
  *	as defined above.
  * @mac_id: MAC ID the measurement applies to.
@@ -2187,7 +2189,7 @@ struct iwl_link_qual_msrmnt_cmd {
 } __packed /* LQM_CMD_API_S_VER_1 */;
 
 /**
- * Link Quality Measurement notification
+ * struct iwl_link_qual_msrmnt_notif - Link Quality Measurement notification
  *
  * @frequent_stations_air_time: an array containing the total air time
  *	(in uSec) used by the most frequently transmitting stations.
@@ -2215,7 +2217,7 @@ struct iwl_link_qual_msrmnt_notif {
 } __packed; /* LQM_MEASUREMENT_COMPLETE_NTF_API_S_VER1 */
 
 /**
- * Channel switch NOA notification
+ * struct iwl_channel_switch_noa_notif - Channel switch NOA notification
  *
  * @id_and_color: ID and color of the MAC
  */