Commit 322aafa6 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'x86-mrst-for-linus' of...

Merge branch 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits)
  x86, mrst: Fix whitespace breakage in apb_timer.c
  x86, mrst: Fix APB timer per cpu clockevent
  x86, mrst: Remove X86_MRST dependency on PCI_IOAPIC
  x86, olpc: Use pci subarch init for OLPC
  x86, pci: Add arch_init to x86_init abstraction
  x86, mrst: Add Kconfig dependencies for Moorestown
  x86, pci: Exclude Moorestown PCI code if CONFIG_X86_MRST=n
  x86, numaq: Make CONFIG_X86_NUMAQ depend on CONFIG_PCI
  x86, pci: Add sanity check for PCI fixed bar probing
  x86, legacy_irq: Remove duplicate vector assigment
  x86, legacy_irq: Remove left over nr_legacy_irqs
  x86, mrst: Platform clock setup code
  x86, apbt: Moorestown APB system timer driver
  x86, mrst: Add vrtc platform data setup code
  x86, mrst: Add platform timer info parsing code
  x86, mrst: Fill in PCI functions in x86_init layer
  x86, mrst: Add dummy legacy pic to platform setup
  x86/PCI: Moorestown PCI support
  x86, ioapic: Add dummy ioapic functions
  x86, ioapic: Early enable ioapic for timer irq
  ...

Fixed up semantic conflict of new clocksources due to commit
17622339 ("clocksource: add argument to resume callback").
parents dd04265b c7bbf52a
......@@ -2834,6 +2834,12 @@ and is between 256 and 4096 characters. It is defined in the file
default x2apic cluster mode on platforms
supporting x2apic.
x86_mrst_timer= [X86-32,APBT]
Choose timer option for x86 Moorestown MID platform.
Two valid options are apbt timer only and lapic timer
plus one apbt timer for broadcast timer.
x86_mrst_timer=apbt_only | lapic_and_apbt
xd= [HW,XT] Original XT pre-IDE (RLL encoded) disks.
xd_geo= See header of drivers/block/xd.c.
......
......@@ -393,8 +393,12 @@ config X86_ELAN
config X86_MRST
bool "Moorestown MID platform"
depends on PCI
depends on PCI_GOANY
depends on X86_32
depends on X86_EXTENDED_PLATFORM
depends on X86_IO_APIC
select APB_TIMER
---help---
Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin
Internet Device(MID) platform. Moorestown consists of two chips:
......@@ -429,6 +433,7 @@ config X86_32_NON_STANDARD
config X86_NUMAQ
bool "NUMAQ (IBM/Sequent)"
depends on X86_32_NON_STANDARD
depends on PCI
select NUMA
select X86_MPPARSE
---help---
......@@ -629,6 +634,16 @@ config HPET_EMULATE_RTC
def_bool y
depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y)
config APB_TIMER
def_bool y if MRST
prompt "Langwell APB Timer Support" if X86_MRST
help
APB timer is the replacement for 8254, HPET on X86 MID platforms.
The APBT provides a stable time base on SMP
systems, unlike the TSC, but it is more expensive to access,
as it is off-chip. APB timers are always running regardless of CPU
C states, they are used as per CPU clockevent device when possible.
# Mark as embedded because too many people got it wrong.
# The code disables itself when not needed.
config DMI
......
/*
* apb_timer.h: Driver for Langwell APB timer based on Synopsis DesignWare
*
* (C) Copyright 2009 Intel Corporation
* Author: Jacob Pan (jacob.jun.pan@intel.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; version 2
* of the License.
*
* Note:
*/
#ifndef ASM_X86_APBT_H
#define ASM_X86_APBT_H
#include <linux/sfi.h>
#ifdef CONFIG_APB_TIMER
/* Langwell DW APB timer registers */
#define APBTMR_N_LOAD_COUNT 0x00
#define APBTMR_N_CURRENT_VALUE 0x04
#define APBTMR_N_CONTROL 0x08
#define APBTMR_N_EOI 0x0c
#define APBTMR_N_INT_STATUS 0x10
#define APBTMRS_INT_STATUS 0xa0
#define APBTMRS_EOI 0xa4
#define APBTMRS_RAW_INT_STATUS 0xa8
#define APBTMRS_COMP_VERSION 0xac
#define APBTMRS_REG_SIZE 0x14
/* register bits */
#define APBTMR_CONTROL_ENABLE (1<<0)
#define APBTMR_CONTROL_MODE_PERIODIC (1<<1) /*1: periodic 0:free running */
#define APBTMR_CONTROL_INT (1<<2)
/* default memory mapped register base */
#define LNW_SCU_ADDR 0xFF100000
#define LNW_EXT_TIMER_OFFSET 0x1B800
#define APBT_DEFAULT_BASE (LNW_SCU_ADDR+LNW_EXT_TIMER_OFFSET)
#define LNW_EXT_TIMER_PGOFFSET 0x800
/* APBT clock speed range from PCLK to fabric base, 25-100MHz */
#define APBT_MAX_FREQ 50
#define APBT_MIN_FREQ 1
#define APBT_MMAP_SIZE 1024
#define APBT_DEV_USED 1
extern void apbt_time_init(void);
extern struct clock_event_device *global_clock_event;
extern unsigned long apbt_quick_calibrate(void);
extern int arch_setup_apbt_irqs(int irq, int trigger, int mask, int cpu);
extern void apbt_setup_secondary_clock(void);
extern unsigned int boot_cpu_id;
extern int disable_apbt_percpu;
extern struct sfi_timer_table_entry *sfi_get_mtmr(int hint);
extern void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr);
extern int sfi_mtimer_num;
#else /* CONFIG_APB_TIMER */
static inline unsigned long apbt_quick_calibrate(void) {return 0; }
static inline void apbt_time_init(void) {return 0; }
#endif
#endif /* ASM_X86_APBT_H */
......@@ -53,13 +53,6 @@ extern void threshold_interrupt(void);
extern void call_function_interrupt(void);
extern void call_function_single_interrupt(void);
/* PIC specific functions */
extern void disable_8259A_irq(unsigned int irq);
extern void enable_8259A_irq(unsigned int irq);
extern int i8259A_irq_pending(unsigned int irq);
extern void make_8259A_irq(unsigned int irq);
extern void init_8259A(int aeoi);
/* IOAPIC */
#define IO_APIC_IRQ(x) (((x) >= NR_IRQS_LEGACY) || ((1<<(x)) & io_apic_irqs))
extern unsigned long io_apic_irqs;
......
......@@ -26,11 +26,6 @@ extern unsigned int cached_irq_mask;
extern raw_spinlock_t i8259A_lock;
extern void init_8259A(int auto_eoi);
extern void enable_8259A_irq(unsigned int irq);
extern void disable_8259A_irq(unsigned int irq);
extern unsigned int startup_8259A_irq(unsigned int irq);
/* the PIC may need a careful delay on some platforms, hence specific calls */
static inline unsigned char inb_pic(unsigned int port)
{
......@@ -57,7 +52,17 @@ static inline void outb_pic(unsigned char value, unsigned int port)
extern struct irq_chip i8259A_chip;
extern void mask_8259A(void);
extern void unmask_8259A(void);
struct legacy_pic {
int nr_legacy_irqs;
struct irq_chip *chip;
void (*mask_all)(void);
void (*restore_mask)(void);
void (*init)(int auto_eoi);
int (*irq_pending)(unsigned int irq);
void (*make_irq)(unsigned int irq);
};
extern struct legacy_pic *legacy_pic;
extern struct legacy_pic null_legacy_pic;
#endif /* _ASM_X86_I8259_H */
......@@ -143,8 +143,6 @@ extern int noioapicreroute;
/* 1 if the timer IRQ uses the '8259A Virtual Wire' mode */
extern int timer_through_8259;
extern void io_apic_disable_legacy(void);
/*
* If we use the IO-APIC for IRQ routing, disable automatic
* assignment of PCI IRQ's.
......@@ -189,6 +187,7 @@ extern struct mp_ioapic_gsi mp_gsi_routing[];
int mp_find_ioapic(int gsi);
int mp_find_ioapic_pin(int ioapic, int gsi);
void __init mp_register_ioapic(int id, u32 address, u32 gsi_base);
extern void __init pre_init_apic_IRQ0(void);
#else /* !CONFIG_X86_IO_APIC */
......@@ -198,7 +197,11 @@ static const int timer_through_8259 = 0;
static inline void ioapic_init_mappings(void) { }
static inline void ioapic_insert_resources(void) { }
static inline void probe_nr_irqs_gsi(void) { }
static inline int mp_find_ioapic(int gsi) { return 0; }
struct io_apic_irq_attr;
static inline int io_apic_set_pci_routing(struct device *dev, int irq,
struct io_apic_irq_attr *irq_attr) { return 0; }
#endif
#endif /* _ASM_X86_IO_APIC_H */
......@@ -48,6 +48,5 @@ extern DECLARE_BITMAP(used_vectors, NR_VECTORS);
extern int vector_used_by_percpu_irq(unsigned int vector);
extern void init_ISA_irqs(void);
extern int nr_legacy_irqs;
#endif /* _ASM_X86_IRQ_H */
/*
* mrst.h: Intel Moorestown platform specific setup code
*
* (C) Copyright 2009 Intel Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; version 2
* of the License.
*/
#ifndef _ASM_X86_MRST_H
#define _ASM_X86_MRST_H
extern int pci_mrst_init(void);
int __init sfi_parse_mrtc(struct sfi_table_header *table);
#define SFI_MTMR_MAX_NUM 8
#define SFI_MRTC_MAX 8
#endif /* _ASM_X86_MRST_H */
......@@ -30,6 +30,7 @@
extern int found_numaq;
extern int get_memcfg_numaq(void);
extern int pci_numaq_init(void);
extern void *xquad_portio;
......
......@@ -13,7 +13,6 @@ struct olpc_platform_t {
#define OLPC_F_PRESENT 0x01
#define OLPC_F_DCON 0x02
#define OLPC_F_VSA 0x04
#ifdef CONFIG_OLPC
......@@ -50,18 +49,6 @@ static inline int olpc_has_dcon(void)
return (olpc_platform_info.flags & OLPC_F_DCON) ? 1 : 0;
}
/*
* The VSA is software from AMD that typical Geode bioses will include.
* It is used to emulate the PCI bus, VGA, etc. OLPC's Open Firmware does
* not include the VSA; instead, PCI is emulated by the kernel.
*
* The VSA is described further in arch/x86/pci/olpc.c.
*/
static inline int olpc_has_vsa(void)
{
return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0;
}
/*
* The "Mass Production" version of OLPC's XO is identified as being model
* C2. During the prototype phase, the following models (in chronological
......@@ -87,13 +74,10 @@ static inline int olpc_has_dcon(void)
return 0;
}
static inline int olpc_has_vsa(void)
{
return 0;
}
#endif
extern int pci_olpc_init(void);
/* EC related functions */
extern int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
......
......@@ -45,8 +45,15 @@ static inline int pci_proc_domain(struct pci_bus *bus)
#ifdef CONFIG_PCI
extern unsigned int pcibios_assign_all_busses(void);
extern int pci_legacy_init(void);
# ifdef CONFIG_ACPI
# define x86_default_pci_init pci_acpi_init
# else
# define x86_default_pci_init pci_legacy_init
# endif
#else
#define pcibios_assign_all_busses() 0
# define pcibios_assign_all_busses() 0
# define x86_default_pci_init NULL
#endif
extern unsigned long pci_mem_start;
......
......@@ -83,7 +83,6 @@ struct irq_routing_table {
extern unsigned int pcibios_irq_mask;
extern int pcibios_scanned;
extern spinlock_t pci_config_lock;
extern int (*pcibios_enable_irq)(struct pci_dev *dev);
......@@ -106,16 +105,15 @@ extern bool port_cf9_safe;
extern int pci_direct_probe(void);
extern void pci_direct_init(int type);
extern void pci_pcbios_init(void);
extern int pci_olpc_init(void);
extern void __init dmi_check_pciprobe(void);
extern void __init dmi_check_skip_isa_align(void);
/* some common used subsys_initcalls */
extern int __init pci_acpi_init(void);
extern int __init pcibios_irq_init(void);
extern int __init pci_visws_init(void);
extern int __init pci_numaq_init(void);
extern void __init pcibios_irq_init(void);
extern int __init pcibios_init(void);
extern int pci_legacy_init(void);
extern void pcibios_fixup_irqs(void);
/* pci-mmconfig.c */
......@@ -183,3 +181,17 @@ static inline void mmio_config_writel(void __iomem *pos, u32 val)
{
asm volatile("movl %%eax,(%1)" : : "a" (val), "r" (pos) : "memory");
}
#ifdef CONFIG_PCI
# ifdef CONFIG_ACPI
# define x86_default_pci_init pci_acpi_init
# else
# define x86_default_pci_init pci_legacy_init
# endif
# define x86_default_pci_init_irq pcibios_irq_init
# define x86_default_pci_fixup_irqs pcibios_fixup_irqs
#else
# define x86_default_pci_init NULL
# define x86_default_pci_init_irq NULL
# define x86_default_pci_fixup_irqs NULL
#endif
......@@ -37,10 +37,8 @@ void setup_bios_corruption_check(void);
#ifdef CONFIG_X86_VISWS
extern void visws_early_detect(void);
extern int is_visws_box(void);
#else
static inline void visws_early_detect(void) { }
static inline int is_visws_box(void) { return 0; }
#endif
extern unsigned long saved_video_mode;
......
......@@ -122,4 +122,6 @@ extern char visws_board_type;
extern char visws_board_rev;
extern int pci_visws_init(void);
#endif /* _ASM_X86_VISWS_COBALT_H */
......@@ -98,6 +98,20 @@ struct x86_init_iommu {
int (*iommu_init)(void);
};
/**
* struct x86_init_pci - platform specific pci init functions
* @arch_init: platform specific pci arch init call
* @init: platform specific pci subsystem init
* @init_irq: platform specific pci irq init
* @fixup_irqs: platform specific pci irq fixup
*/
struct x86_init_pci {
int (*arch_init)(void);
int (*init)(void);
void (*init_irq)(void);
void (*fixup_irqs)(void);
};
/**
* struct x86_init_ops - functions for platform specific setup
*
......@@ -110,6 +124,7 @@ struct x86_init_ops {
struct x86_init_paging paging;
struct x86_init_timers timers;
struct x86_init_iommu iommu;
struct x86_init_pci pci;
};
/**
......
......@@ -87,6 +87,7 @@ obj-$(CONFIG_VM86) += vm86_32.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_HPET_TIMER) += hpet.o
obj-$(CONFIG_APB_TIMER) += apb_timer.o
obj-$(CONFIG_K8_NB) += k8.o
obj-$(CONFIG_DEBUG_RODATA_TEST) += test_rodata.o
......
......@@ -35,6 +35,7 @@
#include <linux/ioport.h>
#include <linux/pci.h>
#include <asm/pci_x86.h>
#include <asm/pgtable.h>
#include <asm/io_apic.h>
#include <asm/apic.h>
......@@ -1624,6 +1625,9 @@ int __init acpi_boot_init(void)
acpi_table_parse(ACPI_SIG_HPET, acpi_parse_hpet);
if (!acpi_noirq)
x86_init.pci.init = pci_acpi_init;
return 0;
}
......
/*
* apb_timer.c: Driver for Langwell APB timers
*
* (C) Copyright 2009 Intel Corporation
* Author: Jacob Pan (jacob.jun.pan@intel.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; version 2
* of the License.
*
* Note:
* Langwell is the south complex of Intel Moorestown MID platform. There are
* eight external timers in total that can be used by the operating system.
* The timer information, such as frequency and addresses, is provided to the
* OS via SFI tables.
* Timer interrupts are routed via FW/HW emulated IOAPIC independently via
* individual redirection table entries (RTE).
* Unlike HPET, there is no master counter, therefore one of the timers are
* used as clocksource. The overall allocation looks like:
* - timer 0 - NR_CPUs for per cpu timer
* - one timer for clocksource
* - one timer for watchdog driver.
* It is also worth notice that APB timer does not support true one-shot mode,
* free-running mode will be used here to emulate one-shot mode.
* APB timer can also be used as broadcast timer along with per cpu local APIC
* timer, but by default APB timer has higher rating than local APIC timers.
*/
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/sysdev.h>
#include <linux/pm.h>
#include <linux/pci.h>
#include <linux/sfi.h>
#include <linux/interrupt.h>
#include <linux/cpu.h>
#include <linux/irq.h>
#include <asm/fixmap.h>
#include <asm/apb_timer.h>
#define APBT_MASK CLOCKSOURCE_MASK(32)
#define APBT_SHIFT 22
#define APBT_CLOCKEVENT_RATING 150
#define APBT_CLOCKSOURCE_RATING 250
#define APBT_MIN_DELTA_USEC 200
#define EVT_TO_APBT_DEV(evt) container_of(evt, struct apbt_dev, evt)
#define APBT_CLOCKEVENT0_NUM (0)
#define APBT_CLOCKEVENT1_NUM (1)
#define APBT_CLOCKSOURCE_NUM (2)
static unsigned long apbt_address;
static int apb_timer_block_enabled;
static void __iomem *apbt_virt_address;
static int phy_cs_timer_id;
/*
* Common DW APB timer info
*/
static uint64_t apbt_freq;
static void apbt_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt);
static int apbt_next_event(unsigned long delta,
struct clock_event_device *evt);
static cycle_t apbt_read_clocksource(struct clocksource *cs);
static void apbt_restart_clocksource(struct clocksource *cs);
struct apbt_dev {
struct clock_event_device evt;
unsigned int num;
int cpu;
unsigned int irq;
unsigned int tick;
unsigned int count;
unsigned int flags;
char name[10];
};
int disable_apbt_percpu __cpuinitdata;
static DEFINE_PER_CPU(struct apbt_dev, cpu_apbt_dev);
#ifdef CONFIG_SMP
static unsigned int apbt_num_timers_used;
static struct apbt_dev *apbt_devs;
#endif
static inline unsigned long apbt_readl_reg(unsigned long a)
{
return readl(apbt_virt_address + a);
}
static inline void apbt_writel_reg(unsigned long d, unsigned long a)
{
writel(d, apbt_virt_address + a);
}
static inline unsigned long apbt_readl(int n, unsigned long a)
{
return readl(apbt_virt_address + a + n * APBTMRS_REG_SIZE);
}
static inline void apbt_writel(int n, unsigned long d, unsigned long a)
{
writel(d, apbt_virt_address + a + n * APBTMRS_REG_SIZE);
}
static inline void apbt_set_mapping(void)
{
struct sfi_timer_table_entry *mtmr;
if (apbt_virt_address) {
pr_debug("APBT base already mapped\n");
return;
}
mtmr = sfi_get_mtmr(APBT_CLOCKEVENT0_NUM);
if (mtmr == NULL) {
printk(KERN_ERR "Failed to get MTMR %d from SFI\n",
APBT_CLOCKEVENT0_NUM);
return;
}
apbt_address = (unsigned long)mtmr->phys_addr;
if (!apbt_address) {
printk(KERN_WARNING "No timer base from SFI, use default\n");
apbt_address = APBT_DEFAULT_BASE;
}
apbt_virt_address = ioremap_nocache(apbt_address, APBT_MMAP_SIZE);
if (apbt_virt_address) {
pr_debug("Mapped APBT physical addr %p at virtual addr %p\n",\
(void *)apbt_address, (void *)apbt_virt_address);
} else {
pr_debug("Failed mapping APBT phy address at %p\n",\
(void *)apbt_address);
goto panic_noapbt;
}
apbt_freq = mtmr->freq_hz / USEC_PER_SEC;
sfi_free_mtmr(mtmr);
/* Now figure out the physical timer id for clocksource device */
mtmr = sfi_get_mtmr(APBT_CLOCKSOURCE_NUM);
if (mtmr == NULL)
goto panic_noapbt;
/* Now figure out the physical timer id */
phy_cs_timer_id = (unsigned int)(mtmr->phys_addr & 0xff)
/ APBTMRS_REG_SIZE;
pr_debug("Use timer %d for clocksource\n", phy_cs_timer_id);
return;
panic_noapbt:
panic("Failed to setup APB system timer\n");
}
static inline void apbt_clear_mapping(void)
{
iounmap(apbt_virt_address);
apbt_virt_address = NULL;
}
/*
* APBT timer interrupt enable / disable
*/
static inline int is_apbt_capable(void)
{
return apbt_virt_address ? 1 : 0;
}
static struct clocksource clocksource_apbt = {
.name = "apbt",
.rating = APBT_CLOCKSOURCE_RATING,
.read = apbt_read_clocksource,
.mask = APBT_MASK,
.shift = APBT_SHIFT,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.resume = apbt_restart_clocksource,
};
/* boot APB clock event device */
static struct clock_event_device apbt_clockevent = {
.name = "apbt0",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = apbt_set_mode,
.set_next_event = apbt_next_event,
.shift = APBT_SHIFT,
.irq = 0,
.rating = APBT_CLOCKEVENT_RATING,
};
/*
* if user does not want to use per CPU apb timer, just give it a lower rating
* than local apic timer and skip the late per cpu timer init.
*/
static inline int __init setup_x86_mrst_timer(char *arg)
{
if (!arg)
return -EINVAL;
if (strcmp("apbt_only", arg) == 0)
disable_apbt_percpu = 0;
else if (strcmp("lapic_and_apbt", arg) == 0)
disable_apbt_percpu = 1;
else {
pr_warning("X86 MRST timer option %s not recognised"
" use x86_mrst_timer=apbt_only or lapic_and_apbt\n",
arg);
return -EINVAL;
}
return 0;
}
__setup("x86_mrst_timer=", setup_x86_mrst_timer);
/*
* start count down from 0xffff_ffff. this is done by toggling the enable bit
* then load initial load count to ~0.
*/
static void apbt_start_counter(int n)
{
unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL);
ctrl &= ~APBTMR_CONTROL_ENABLE;
apbt_writel(n, ctrl, APBTMR_N_CONTROL);
apbt_writel(n, ~0, APBTMR_N_LOAD_COUNT);
/* enable, mask interrupt */
ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC;
ctrl |= (APBTMR_CONTROL_ENABLE | APBTMR_CONTROL_INT);
apbt_writel(n, ctrl, APBTMR_N_CONTROL);
/* read it once to get cached counter value initialized */
apbt_read_clocksource(&clocksource_apbt);
}
static irqreturn_t apbt_interrupt_handler(int irq, void *data)
{
struct apbt_dev *dev = (struct apbt_dev *)data;
struct clock_event_device *aevt = &dev->evt;
if (!aevt->event_handler) {
printk(KERN_INFO "Spurious APBT timer interrupt on %d\n",
dev->num);
return IRQ_NONE;
}
aevt->event_handler(aevt);
return IRQ_HANDLED;
}
static void apbt_restart_clocksource(struct clocksource *cs)
{
apbt_start_counter(phy_cs_timer_id);
}
/* Setup IRQ routing via IOAPIC */
#ifdef CONFIG_SMP
static void apbt_setup_irq(struct apbt_dev *adev)
{
struct irq_chip *chip;
struct irq_desc *desc;
/* timer0 irq has been setup early */
if (adev->irq == 0)
return;
desc = irq_to_desc(adev->irq);
chip = get_irq_chip(adev->irq);
disable_irq(adev->irq);
desc->status |= IRQ_MOVE_PCNTXT;
irq_set_affinity(adev->irq, cpumask_of(adev->cpu));
/* APB timer irqs are set up as mp_irqs, timer is edge triggerred */
set_irq_chip_and_handler_name(adev->irq, chip, handle_edge_irq, "edge");
enable_irq(adev->irq);
if (system_state == SYSTEM_BOOTING)
if (request_irq(adev->irq, apbt_interrupt_handler,
IRQF_TIMER | IRQF_DISABLED | IRQF_NOBALANCING,
adev->name, adev)) {
printk(KERN_ERR "Failed request IRQ for APBT%d\n",
adev->num);
}
}
#endif
static void apbt_enable_int(int n)
{
unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL);
/* clear pending intr */
apbt_readl(n, APBTMR_N_EOI);
ctrl &= ~APBTMR_CONTROL_INT;
apbt_writel(n, ctrl, APBTMR_N_CONTROL);
}
static void apbt_disable_int(int n)
{
unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL);
ctrl |= APBTMR_CONTROL_INT;
apbt_writel(n, ctrl, APBTMR_N_CONTROL);
}
static int __init apbt_clockevent_register(void)
{
struct sfi_timer_table_entry *mtmr;
struct apbt_dev *adev = &__get_cpu_var(cpu_apbt_dev);
mtmr = sfi_get_mtmr(APBT_CLOCKEVENT0_NUM);
if (mtmr == NULL) {
printk(KERN_ERR "Failed to get MTMR %d from SFI\n",
APBT_CLOCKEVENT0_NUM);
return -ENODEV;
}
/*
* We need to calculate the scaled math multiplication factor for
* nanosecond to apbt tick conversion.
* mult = (nsec/cycle)*2^APBT_SHIFT
*/
apbt_clockevent.mult = div_sc((unsigned long) mtmr->freq_hz
, NSEC_PER_SEC, APBT_SHIFT);
/* Calculate the min / max delta */
apbt_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
&apbt_clockevent);
apbt_clockevent.min_delta_ns = clockevent_delta2ns(
APBT_MIN_DELTA_USEC*apbt_freq,
&apbt_clockevent);
/*
* Start apbt with the boot cpu mask and make it
* global if not used for per cpu timer.
*/
apbt_clockevent.cpumask = cpumask_of(smp_processor_id());
adev->num = smp_processor_id();
memcpy(&adev->evt, &apbt_clockevent, sizeof(struct clock_event_device));
if (disable_apbt_percpu) {
apbt_clockevent.rating = APBT_CLOCKEVENT_RATING - 100;
global_clock_event = &adev->evt;
printk(KERN_DEBUG "%s clockevent registered as global\n",
global_clock_event->name);
}
if (request_irq(apbt_clockevent.irq, apbt_interrupt_handler,
IRQF_TIMER | IRQF_DISABLED | IRQF_NOBALANCING,
apbt_clockevent.name, adev)) {
printk(KERN_ERR "Failed request IRQ for APBT%d\n",
apbt_clockevent.irq);
}
clockevents_register_device(&adev->evt);
/* Start APBT 0 interrupts */
apbt_enable_int(APBT_CLOCKEVENT0_NUM);
sfi_free_mtmr(mtmr);
return 0;
}
#ifdef CONFIG_SMP
/* Should be called with per cpu */
void apbt_setup_secondary_clock(void)
{
struct apbt_dev *adev;
struct clock_event_device *aevt;
int cpu;
/* Don't register boot CPU clockevent */
cpu = smp_processor_id();
if (cpu == boot_cpu_id)
return;
/*
* We need to calculate the scaled math multiplication factor for
* nanosecond to apbt tick conversion.
* mult = (nsec/cycle)*2^APBT_SHIFT
*/
printk(KERN_INFO "Init per CPU clockevent %d\n", cpu);
adev = &per_cpu(cpu_apbt_dev, cpu);
aevt = &adev->evt;
memcpy(aevt, &apbt_clockevent, sizeof(*aevt));
aevt->cpumask = cpumask_of(cpu);
aevt->name = adev->name;
aevt->mode = CLOCK_EVT_MODE_UNUSED;
printk(KERN_INFO "Registering CPU %d clockevent device %s, mask %08x\n",
cpu, aevt->name, *(u32 *)aevt->cpumask);
apbt_setup_irq(adev);
clockevents_register_device(aevt);
apbt_enable_int(cpu);
return;
}
/*
* this notify handler process CPU hotplug events. in case of S0i3, nonboot
* cpus are disabled/enabled frequently, for performance reasons, we keep the
* per cpu timer irq registered so that we do need to do free_irq/request_irq.
*
* TODO: it might be more reliable to directly disable percpu clockevent device
* without the notifier chain. currently, cpu 0 may get interrupts from other
* cpu timers during the offline process due to the ordering of notification.
* the extra interrupt is harmless.
*/
static int apbt_cpuhp_notify(struct notifier_block *n,
unsigned long action, void *hcpu)
{
unsigned long cpu = (unsigned long)hcpu;
struct apbt_dev *adev = &per_cpu(cpu_apbt_dev, cpu);
switch (action & 0xf) {
case CPU_DEAD:
apbt_disable_int(cpu);
if (system_state == SYSTEM_RUNNING)
pr_debug("skipping APBT CPU %lu offline\n", cpu);
else if (adev) {
pr_debug("APBT clockevent for cpu %lu offline\n", cpu);
free_irq(adev->irq, adev);
}
break;
default:
pr_debug(KERN_INFO "APBT notified %lu, no action\n", action);
}
return NOTIFY_OK;
}
static __init int apbt_late_init(void)
{
if (disable_apbt_percpu)
return 0;
/* This notifier should be called after workqueue is ready */
hotcpu_notifier(apbt_cpuhp_notify, -20);
return 0;
}
fs_initcall(apbt_late_init);
#else
void apbt_setup_secondary_clock(void) {}
#endif /* CONFIG_SMP */
static void apbt_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
unsigned long ctrl;
uint64_t delta;
int timer_num;
struct apbt_dev *adev = EVT_TO_APBT_DEV(evt);
timer_num = adev->num;
pr_debug("%s CPU %d timer %d mode=%d\n",
__func__, first_cpu(*evt->cpumask), timer_num, mode);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * apbt_clockevent.mult;
delta >>= apbt_clockevent.shift;
ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL);
ctrl |= APBTMR_CONTROL_MODE_PERIODIC;
apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);
/*
* DW APB p. 46, have to disable timer before load counter,
* may cause sync problem.
*/
ctrl &= ~APBTMR_CONTROL_ENABLE;
apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);
udelay(1);
pr_debug("Setting clock period %d for HZ %d\n", (int)delta, HZ);
apbt_writel(timer_num, delta, APBTMR_N_LOAD_COUNT);
ctrl |= APBTMR_CONTROL_ENABLE;
apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);
break;
/* APB timer does not have one-shot mode, use free running mode */
case CLOCK_EVT_MODE_ONESHOT:
ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL);
/*
* set free running mode, this mode will let timer reload max
* timeout which will give time (3min on 25MHz clock) to rearm
* the next event, therefore emulate the one-shot mode.
*/
ctrl &= ~APBTMR_CONTROL_ENABLE;
ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC;
apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);
/* write again to set free running mode */
apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);
/*
* DW APB p. 46, load counter with all 1s before starting free
* running mode.
*/
apbt_writel(timer_num, ~0, APBTMR_N_LOAD_COUNT);
ctrl &= ~APBTMR_CONTROL_INT;
ctrl |= APBTMR_CONTROL_ENABLE;
apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
apbt_disable_int(timer_num);
ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL);
ctrl &= ~APBTMR_CONTROL_ENABLE;
apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);
break;
case CLOCK_EVT_MODE_RESUME:
apbt_enable_int(timer_num);
break;
}
}
static int apbt_next_event(unsigned long delta,
struct clock_event_device *evt)
{
unsigned long ctrl;
int timer_num;
struct apbt_dev *adev = EVT_TO_APBT_DEV(evt);
timer_num = adev->num;
/* Disable timer */
ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL);
ctrl &= ~APBTMR_CONTROL_ENABLE;
apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);
/* write new count */
apbt_writel(timer_num, delta, APBTMR_N_LOAD_COUNT);
ctrl |= APBTMR_CONTROL_ENABLE;
apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);
return 0;
}
/*
* APB timer clock is not in sync with pclk on Langwell, which translates to
* unreliable read value caused by sampling error. the error does not add up
* overtime and only happens when sampling a 0 as a 1 by mistake. so the time
* would go backwards. the following code is trying to prevent time traveling
* backwards. little bit paranoid.
*/
static cycle_t apbt_read_clocksource(struct clocksource *cs)
{
unsigned long t0, t1, t2;
static unsigned long last_read;
bad_count:
t1 = apbt_readl(phy_cs_timer_id,
APBTMR_N_CURRENT_VALUE);
t2 = apbt_readl(phy_cs_timer_id,
APBTMR_N_CURRENT_VALUE);
if (unlikely(t1 < t2)) {
pr_debug("APBT: read current count error %lx:%lx:%lx\n",
t1, t2, t2 - t1);
goto bad_count;
}
/*
* check against cached last read, makes sure time does not go back.
* it could be a normal rollover but we will do tripple check anyway
*/
if (unlikely(t2 > last_read)) {
/* check if we have a normal rollover */
unsigned long raw_intr_status =
apbt_readl_reg(APBTMRS_RAW_INT_STATUS);
/*
* cs timer interrupt is masked but raw intr bit is set if
* rollover occurs. then we read EOI reg to clear it.
*/
if (raw_intr_status & (1 << phy_cs_timer_id)) {
apbt_readl(phy_cs_timer_id, APBTMR_N_EOI);
goto out;
}
pr_debug("APB CS going back %lx:%lx:%lx ",
t2, last_read, t2 - last_read);
bad_count_x3:
pr_debug(KERN_INFO "tripple check enforced\n");
t0 = apbt_readl(phy_cs_timer_id,
APBTMR_N_CURRENT_VALUE);
udelay(1);
t1 = apbt_readl(phy_cs_timer_id,
APBTMR_N_CURRENT_VALUE);
udelay(1);
t2 = apbt_readl(phy_cs_timer_id,
APBTMR_N_CURRENT_VALUE);
if ((t2 > t1) || (t1 > t0)) {
printk(KERN_ERR "Error: APB CS tripple check failed\n");
goto bad_count_x3;
}
}
out:
last_read = t2;
return (cycle_t)~t2;
}
static int apbt_clocksource_register(void)
{
u64 start, now;
cycle_t t1;
/* Start the counter, use timer 2 as source, timer 0/1 for event */
apbt_start_counter(phy_cs_timer_id);
/* Verify whether apbt counter works */
t1 = apbt_read_clocksource(&clocksource_apbt);
rdtscll(start);
/*
* We don't know the TSC frequency yet, but waiting for
* 200000 TSC cycles is safe:
* 4 GHz == 50us
* 1 GHz == 200us
*/
do {
rep_nop();
rdtscll(now);
} while ((now - start) < 200000UL);
/* APBT is the only always on clocksource, it has to work! */
if (t1 == apbt_read_clocksource(&clocksource_apbt))
panic("APBT counter not counting. APBT disabled\n");
/*
* initialize and register APBT clocksource
* convert that to ns/clock cycle
* mult = (ns/c) * 2^APBT_SHIFT
*/
clocksource_apbt.mult = div_sc(MSEC_PER_SEC,
(unsigned long) apbt_freq, APBT_SHIFT);
clocksource_register(&clocksource_apbt);
return 0;
}
/*
* Early setup the APBT timer, only use timer 0 for booting then switch to
* per CPU timer if possible.
* returns 1 if per cpu apbt is setup
* returns 0 if no per cpu apbt is chosen
* panic if set up failed, this is the only platform timer on Moorestown.
*/
void __init apbt_time_init(void)
{
#ifdef CONFIG_SMP
int i;
struct sfi_timer_table_entry *p_mtmr;
unsigned int percpu_timer;
struct apbt_dev *adev;
#endif
if (apb_timer_block_enabled)
return;
apbt_set_mapping();
if (apbt_virt_address) {
pr_debug("Found APBT version 0x%lx\n",\
apbt_readl_reg(APBTMRS_COMP_VERSION));
} else
goto out_noapbt;
/*
* Read the frequency and check for a sane value, for ESL model
* we extend the possible clock range to allow time scaling.
*/
if (apbt_freq < APBT_MIN_FREQ || apbt_freq > APBT_MAX_FREQ) {
pr_debug("APBT has invalid freq 0x%llx\n", apbt_freq);
goto out_noapbt;
}
if (apbt_clocksource_register()) {
pr_debug("APBT has failed to register clocksource\n");
goto out_noapbt;
}
if (!apbt_clockevent_register())
apb_timer_block_enabled = 1;
else {
pr_debug("APBT has failed to register clockevent\n");
goto out_noapbt;
}
#ifdef CONFIG_SMP
/* kernel cmdline disable apb timer, so we will use lapic timers */
if (disable_apbt_percpu) {
printk(KERN_INFO "apbt: disabled per cpu timer\n");
return;
}
pr_debug("%s: %d CPUs online\n", __func__, num_online_cpus());
if (num_possible_cpus() <= sfi_mtimer_num) {
percpu_timer = 1;
apbt_num_timers_used = num_possible_cpus();
} else {
percpu_timer = 0;
apbt_num_timers_used = 1;
adev = &per_cpu(cpu_apbt_dev, 0);
adev->flags &= ~APBT_DEV_USED;
}
pr_debug("%s: %d APB timers used\n", __func__, apbt_num_timers_used);
/* here we set up per CPU timer data structure */
apbt_devs = kzalloc(sizeof(struct apbt_dev) * apbt_num_timers_used,
GFP_KERNEL);
if (!apbt_devs) {
printk(KERN_ERR "Failed to allocate APB timer devices\n");
return;
}
for (i = 0; i < apbt_num_timers_used; i++) {
adev = &per_cpu(cpu_apbt_dev, i);
adev->num = i;
adev->cpu = i;
p_mtmr = sfi_get_mtmr(i);
if (p_mtmr) {
adev->tick = p_mtmr->freq_hz;
adev->irq = p_mtmr->irq;
} else
printk(KERN_ERR "Failed to get timer for cpu %d\n", i);
adev->count = 0;
sprintf(adev->name, "apbt%d", i);
}
#endif
return;
out_noapbt:
apbt_clear_mapping();
apb_timer_block_enabled = 0;
panic("failed to enable APB timer\n");
}
static inline void apbt_disable(int n)
{
if (is_apbt_capable()) {
unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL);
ctrl &= ~APBTMR_CONTROL_ENABLE;
apbt_writel(n, ctrl, APBTMR_N_CONTROL);
}
}
/* called before apb_timer_enable, use early map */
unsigned long apbt_quick_calibrate()
{
int i, scale;
u64 old, new;
cycle_t t1, t2;
unsigned long khz = 0;
u32 loop, shift;
apbt_set_mapping();
apbt_start_counter(phy_cs_timer_id);
/* check if the timer can count down, otherwise return */
old = apbt_read_clocksource(&clocksource_apbt);
i = 10000;
while (--i) {
if (old != apbt_read_clocksource(&clocksource_apbt))
break;
}
if (!i)
goto failed;
/* count 16 ms */
loop = (apbt_freq * 1000) << 4;
/* restart the timer to ensure it won't get to 0 in the calibration */
apbt_start_counter(phy_cs_timer_id);
old = apbt_read_clocksource(&clocksource_apbt);
old += loop;
t1 = __native_read_tsc();
do {
new = apbt_read_clocksource(&clocksource_apbt);
} while (new < old);
t2 = __native_read_tsc();
shift = 5;
if (unlikely(loop >> shift == 0)) {
printk(KERN_INFO
"APBT TSC calibration failed, not enough resolution\n");
return 0;
}
scale = (int)div_u64((t2 - t1), loop >> shift);
khz = (scale * apbt_freq * 1000) >> shift;
printk(KERN_INFO "TSC freq calculated by APB timer is %lu khz\n", khz);
return khz;
failed:
return 0;
}
......@@ -1390,7 +1390,7 @@ void __init enable_IR_x2apic(void)
}
local_irq_save(flags);
mask_8259A();
legacy_pic->mask_all();
mask_IO_APIC_setup(ioapic_entries);
if (dmar_table_init_ret)
......@@ -1422,7 +1422,7 @@ void __init enable_IR_x2apic(void)
nox2apic:
if (!ret) /* IR enabling failed */
restore_IO_APIC_setup(ioapic_entries);
unmask_8259A();
legacy_pic->restore_mask();
local_irq_restore(flags);
out:
......@@ -2018,7 +2018,7 @@ static int lapic_resume(struct sys_device *dev)
}
mask_IO_APIC_setup(ioapic_entries);
mask_8259A();
legacy_pic->mask_all();
}
if (x2apic_mode)
......@@ -2062,7 +2062,7 @@ static int lapic_resume(struct sys_device *dev)
if (intr_remapping_enabled) {
reenable_intr_remapping(x2apic_mode);
unmask_8259A();
legacy_pic->restore_mask();
restore_IO_APIC_setup(ioapic_entries);
free_ioapic_entries(ioapic_entries);
}
......
......@@ -143,12 +143,6 @@ static struct irq_cfg irq_cfgx[NR_IRQS_LEGACY];
static struct irq_cfg irq_cfgx[NR_IRQS];
#endif
void __init io_apic_disable_legacy(void)
{
nr_legacy_irqs = 0;
nr_irqs_gsi = 0;
}
int __init arch_early_irq_init(void)
{
struct irq_cfg *cfg;
......@@ -157,6 +151,11 @@ int __init arch_early_irq_init(void)
int node;
int i;
if (!legacy_pic->nr_legacy_irqs) {
nr_irqs_gsi = 0;
io_apic_irqs = ~0UL;
}
cfg = irq_cfgx;
count = ARRAY_SIZE(irq_cfgx);
node= cpu_to_node(boot_cpu_id);
......@@ -170,7 +169,7 @@ int __init arch_early_irq_init(void)
* For legacy IRQ's, start with assigning irq0 to irq15 to
* IRQ0_VECTOR to IRQ15_VECTOR on cpu 0.
*/
if (i < nr_legacy_irqs) {
if (i < legacy_pic->nr_legacy_irqs) {
cfg[i].vector = IRQ0_VECTOR + i;
cpumask_set_cpu(0, cfg[i].domain);
}
......@@ -852,7 +851,7 @@ static int __init find_isa_irq_apic(int irq, int type)
*/
static int EISA_ELCR(unsigned int irq)
{
if (irq < nr_legacy_irqs) {
if (irq < legacy_pic->nr_legacy_irqs) {
unsigned int port = 0x4d0 + (irq >> 3);
return (inb(port) >> (irq & 7)) & 1;
}
......@@ -1439,7 +1438,7 @@ static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq
* controllers like 8259. Now that IO-APIC can handle this irq, update
* the cfg->domain.
*/
if (irq < nr_legacy_irqs && cpumask_test_cpu(0, cfg->domain))
if (irq < legacy_pic->nr_legacy_irqs && cpumask_test_cpu(0, cfg->domain))
apic->vector_allocation_domain(0, cfg->domain);
if (assign_irq_vector(irq, cfg, apic->target_cpus()))
......@@ -1463,8 +1462,8 @@ static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq
}
ioapic_register_intr(irq, desc, trigger);
if (irq < nr_legacy_irqs)
disable_8259A_irq(irq);
if (irq < legacy_pic->nr_legacy_irqs)
legacy_pic->chip->mask(irq);
ioapic_write_entry(apic_id, pin, entry);
}
......@@ -1873,7 +1872,7 @@ __apicdebuginit(void) print_PIC(void)
unsigned int v;
unsigned long flags;
if (!nr_legacy_irqs)
if (!legacy_pic->nr_legacy_irqs)
return;
printk(KERN_DEBUG "\nprinting PIC contents\n");
......@@ -1957,7 +1956,7 @@ void __init enable_IO_APIC(void)
nr_ioapic_registers[apic] = reg_01.bits.entries+1;
}
if (!nr_legacy_irqs)
if (!legacy_pic->nr_legacy_irqs)
return;
for(apic = 0; apic < nr_ioapics; apic++) {
......@@ -2014,7 +2013,7 @@ void disable_IO_APIC(void)
*/
clear_IO_APIC();
if (!nr_legacy_irqs)
if (!legacy_pic->nr_legacy_irqs)
return;
/*
......@@ -2247,9 +2246,9 @@ static unsigned int startup_ioapic_irq(unsigned int irq)
struct irq_cfg *cfg;
raw_spin_lock_irqsave(&ioapic_lock, flags);
if (irq < nr_legacy_irqs) {
disable_8259A_irq(irq);
if (i8259A_irq_pending(irq))
if (irq < legacy_pic->nr_legacy_irqs) {
legacy_pic->chip->mask(irq);
if (legacy_pic->irq_pending(irq))
was_pending = 1;
}
cfg = irq_cfg(irq);
......@@ -2782,8 +2781,8 @@ static inline void init_IO_APIC_traps(void)
* so default to an old-fashioned 8259
* interrupt if we can..
*/
if (irq < nr_legacy_irqs)
make_8259A_irq(irq);
if (irq < legacy_pic->nr_legacy_irqs)
legacy_pic->make_irq(irq);
else
/* Strange. Oh, well.. */
desc->chip = &no_irq_chip;
......@@ -2940,7 +2939,7 @@ static inline void __init check_timer(void)
/*
* get/set the timer IRQ vector:
*/
disable_8259A_irq(0);
legacy_pic->chip->mask(0);
assign_irq_vector(0, cfg, apic->target_cpus());
/*
......@@ -2953,7 +2952,7 @@ static inline void __init check_timer(void)
* automatically.
*/
apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
legacy_pic->init(1);
#ifdef CONFIG_X86_32
{
unsigned int ver;
......@@ -3012,7 +3011,7 @@ static inline void __init check_timer(void)
if (timer_irq_works()) {
if (nmi_watchdog == NMI_IO_APIC) {
setup_nmi();
enable_8259A_irq(0);
legacy_pic->chip->unmask(0);
}
if (disable_timer_pin_1 > 0)
clear_IO_APIC_pin(0, pin1);
......@@ -3035,14 +3034,14 @@ static inline void __init check_timer(void)
*/
replace_pin_at_irq_node(cfg, node, apic1, pin1, apic2, pin2);
setup_timer_IRQ0_pin(apic2, pin2, cfg->vector);
enable_8259A_irq(0);
legacy_pic->chip->unmask(0);
if (timer_irq_works()) {
apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
timer_through_8259 = 1;
if (nmi_watchdog == NMI_IO_APIC) {
disable_8259A_irq(0);
legacy_pic->chip->mask(0);
setup_nmi();
enable_8259A_irq(0);
legacy_pic->chip->unmask(0);
}
goto out;
}
......@@ -3050,7 +3049,7 @@ static inline void __init check_timer(void)
* Cleanup, just in case ...
*/
local_irq_disable();
disable_8259A_irq(0);
legacy_pic->chip->mask(0);
clear_IO_APIC_pin(apic2, pin2);
apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
}
......@@ -3069,22 +3068,22 @@ static inline void __init check_timer(void)
lapic_register_intr(0, desc);
apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */
enable_8259A_irq(0);
legacy_pic->chip->unmask(0);
if (timer_irq_works()) {
apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
goto out;
}
local_irq_disable();
disable_8259A_irq(0);
legacy_pic->chip->mask(0);
apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
apic_printk(APIC_QUIET, KERN_INFO
"...trying to set up timer as ExtINT IRQ...\n");
init_8259A(0);
make_8259A_irq(0);
legacy_pic->init(0);
legacy_pic->make_irq(0);
apic_write(APIC_LVT0, APIC_DM_EXTINT);
unlock_ExtINT_logic();
......@@ -3126,7 +3125,7 @@ void __init setup_IO_APIC(void)
/*
* calling enable_IO_APIC() is moved to setup_local_APIC for BP
*/
io_apic_irqs = nr_legacy_irqs ? ~PIC_IRQS : ~0UL;
io_apic_irqs = legacy_pic->nr_legacy_irqs ? ~PIC_IRQS : ~0UL;
apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
/*
......@@ -3137,7 +3136,7 @@ void __init setup_IO_APIC(void)
sync_Arb_IDs();
setup_IO_APIC_irqs();
init_IO_APIC_traps();
if (nr_legacy_irqs)
if (legacy_pic->nr_legacy_irqs)
check_timer();
}
......@@ -3928,7 +3927,7 @@ static int __io_apic_set_pci_routing(struct device *dev, int irq,
/*
* IRQs < 16 are already in the irq_2_pin[] map
*/
if (irq >= nr_legacy_irqs) {
if (irq >= legacy_pic->nr_legacy_irqs) {
cfg = desc->chip_data;
if (add_pin_to_irq_node_nopanic(cfg, node, ioapic, pin)) {
printk(KERN_INFO "can not add pin %d for irq %d\n",
......@@ -4302,3 +4301,24 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
nr_ioapics++;
}
/* Enable IOAPIC early just for system timer */
void __init pre_init_apic_IRQ0(void)
{
struct irq_cfg *cfg;
struct irq_desc *desc;
printk(KERN_INFO "Early APIC setup for system timer0\n");
#ifndef CONFIG_SMP
phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
#endif
desc = irq_to_desc_alloc_node(0, 0);
setup_local_APIC();
cfg = irq_cfg(0);
add_pin_to_irq_node(cfg, 0, 0, 0);
set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge");
setup_IO_APIC_irq(0, 0, 0, desc, 0, 0);
}
......@@ -177,7 +177,7 @@ int __init check_nmi_watchdog(void)
error:
if (nmi_watchdog == NMI_IO_APIC) {
if (!timer_through_8259)
disable_8259A_irq(0);
legacy_pic->chip->mask(0);
on_each_cpu(__acpi_nmi_disable, NULL, 1);
}
......
......@@ -277,6 +277,7 @@ static __init void early_check_numaq(void)
x86_init.mpparse.mpc_oem_pci_bus = mpc_oem_pci_bus;
x86_init.mpparse.mpc_oem_bus_info = mpc_oem_bus_info;
x86_init.timers.tsc_pre_init = numaq_tsc_init;
x86_init.pci.init = pci_numaq_init;
}
}
......
......@@ -34,6 +34,12 @@
static int i8259A_auto_eoi;
DEFINE_RAW_SPINLOCK(i8259A_lock);
static void mask_and_ack_8259A(unsigned int);
static void mask_8259A(void);
static void unmask_8259A(void);
static void disable_8259A_irq(unsigned int irq);
static void enable_8259A_irq(unsigned int irq);
static void init_8259A(int auto_eoi);
static int i8259A_irq_pending(unsigned int irq);
struct irq_chip i8259A_chip = {
.name = "XT-PIC",
......@@ -63,7 +69,7 @@ unsigned int cached_irq_mask = 0xffff;
*/
unsigned long io_apic_irqs;
void disable_8259A_irq(unsigned int irq)
static void disable_8259A_irq(unsigned int irq)
{
unsigned int mask = 1 << irq;
unsigned long flags;
......@@ -77,7 +83,7 @@ void disable_8259A_irq(unsigned int irq)
raw_spin_unlock_irqrestore(&i8259A_lock, flags);
}
void enable_8259A_irq(unsigned int irq)
static void enable_8259A_irq(unsigned int irq)
{
unsigned int mask = ~(1 << irq);
unsigned long flags;
......@@ -91,7 +97,7 @@ void enable_8259A_irq(unsigned int irq)
raw_spin_unlock_irqrestore(&i8259A_lock, flags);
}
int i8259A_irq_pending(unsigned int irq)
static int i8259A_irq_pending(unsigned int irq)
{
unsigned int mask = 1<<irq;
unsigned long flags;
......@@ -107,7 +113,7 @@ int i8259A_irq_pending(unsigned int irq)
return ret;
}
void make_8259A_irq(unsigned int irq)
static void make_8259A_irq(unsigned int irq)
{
disable_irq_nosync(irq);
io_apic_irqs &= ~(1<<irq);
......@@ -281,7 +287,7 @@ static int __init i8259A_init_sysfs(void)
device_initcall(i8259A_init_sysfs);
void mask_8259A(void)
static void mask_8259A(void)
{
unsigned long flags;
......@@ -293,7 +299,7 @@ void mask_8259A(void)
raw_spin_unlock_irqrestore(&i8259A_lock, flags);
}
void unmask_8259A(void)
static void unmask_8259A(void)
{
unsigned long flags;
......@@ -305,7 +311,7 @@ void unmask_8259A(void)
raw_spin_unlock_irqrestore(&i8259A_lock, flags);
}
void init_8259A(int auto_eoi)
static void init_8259A(int auto_eoi)
{
unsigned long flags;
......@@ -358,3 +364,47 @@ void init_8259A(int auto_eoi)
raw_spin_unlock_irqrestore(&i8259A_lock, flags);
}
/*
* make i8259 a driver so that we can select pic functions at run time. the goal
* is to make x86 binary compatible among pc compatible and non-pc compatible
* platforms, such as x86 MID.
*/
static void legacy_pic_noop(void) { };
static void legacy_pic_uint_noop(unsigned int unused) { };
static void legacy_pic_int_noop(int unused) { };
static struct irq_chip dummy_pic_chip = {
.name = "dummy pic",
.mask = legacy_pic_uint_noop,
.unmask = legacy_pic_uint_noop,
.disable = legacy_pic_uint_noop,
.mask_ack = legacy_pic_uint_noop,
};
static int legacy_pic_irq_pending_noop(unsigned int irq)
{
return 0;
}
struct legacy_pic null_legacy_pic = {
.nr_legacy_irqs = 0,
.chip = &dummy_pic_chip,
.mask_all = legacy_pic_noop,
.restore_mask = legacy_pic_noop,
.init = legacy_pic_int_noop,
.irq_pending = legacy_pic_irq_pending_noop,
.make_irq = legacy_pic_uint_noop,
};
struct legacy_pic default_legacy_pic = {
.nr_legacy_irqs = NR_IRQS_LEGACY,
.chip = &i8259A_chip,
.mask_all = mask_8259A,
.restore_mask = unmask_8259A,
.init = init_8259A,
.irq_pending = i8259A_irq_pending,
.make_irq = make_8259A_irq,
};
struct legacy_pic *legacy_pic = &default_legacy_pic;
......@@ -99,9 +99,6 @@ int vector_used_by_percpu_irq(unsigned int vector)
return 0;
}
/* Number of legacy interrupts */
int nr_legacy_irqs __read_mostly = NR_IRQS_LEGACY;
void __init init_ISA_irqs(void)
{
int i;
......@@ -109,12 +106,12 @@ void __init init_ISA_irqs(void)
#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
init_bsp_APIC();
#endif
init_8259A(0);
legacy_pic->init(0);
/*
* 16 old-style INTA-cycle interrupts:
*/
for (i = 0; i < NR_IRQS_LEGACY; i++) {
for (i = 0; i < legacy_pic->nr_legacy_irqs; i++) {
struct irq_desc *desc = irq_to_desc(i);
desc->status = IRQ_DISABLED;
......@@ -138,7 +135,7 @@ void __init init_IRQ(void)
* then this vector space can be freed and re-used dynamically as the
* irq's migrate etc.
*/
for (i = 0; i < nr_legacy_irqs; i++)
for (i = 0; i < legacy_pic->nr_legacy_irqs; i++)
per_cpu(vector_irq, 0)[IRQ0_VECTOR + i] = i;
x86_init.irqs.intr_init();
......
......@@ -10,8 +10,211 @@
* of the License.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sfi.h>
#include <linux/irq.h>
#include <linux/module.h>
#include <asm/setup.h>
#include <asm/mpspec_def.h>
#include <asm/hw_irq.h>
#include <asm/apic.h>
#include <asm/io_apic.h>
#include <asm/mrst.h>
#include <asm/io.h>
#include <asm/i8259.h>
#include <asm/apb_timer.h>
static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
int sfi_mtimer_num;
struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
EXPORT_SYMBOL_GPL(sfi_mrtc_array);
int sfi_mrtc_num;
static inline void assign_to_mp_irq(struct mpc_intsrc *m,
struct mpc_intsrc *mp_irq)
{
memcpy(mp_irq, m, sizeof(struct mpc_intsrc));
}
static inline int mp_irq_cmp(struct mpc_intsrc *mp_irq,
struct mpc_intsrc *m)
{
return memcmp(mp_irq, m, sizeof(struct mpc_intsrc));
}
static void save_mp_irq(struct mpc_intsrc *m)
{
int i;
for (i = 0; i < mp_irq_entries; i++) {
if (!mp_irq_cmp(&mp_irqs[i], m))
return;
}
assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]);
if (++mp_irq_entries == MAX_IRQ_SOURCES)
panic("Max # of irq sources exceeded!!\n");
}
/* parse all the mtimer info to a static mtimer array */
static int __init sfi_parse_mtmr(struct sfi_table_header *table)
{
struct sfi_table_simple *sb;
struct sfi_timer_table_entry *pentry;
struct mpc_intsrc mp_irq;
int totallen;
sb = (struct sfi_table_simple *)table;
if (!sfi_mtimer_num) {
sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb,
struct sfi_timer_table_entry);
pentry = (struct sfi_timer_table_entry *) sb->pentry;
totallen = sfi_mtimer_num * sizeof(*pentry);
memcpy(sfi_mtimer_array, pentry, totallen);
}
printk(KERN_INFO "SFI: MTIMER info (num = %d):\n", sfi_mtimer_num);
pentry = sfi_mtimer_array;
for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) {
printk(KERN_INFO "timer[%d]: paddr = 0x%08x, freq = %dHz,"
" irq = %d\n", totallen, (u32)pentry->phys_addr,
pentry->freq_hz, pentry->irq);
if (!pentry->irq)
continue;
mp_irq.type = MP_IOAPIC;
mp_irq.irqtype = mp_INT;
/* triggering mode edge bit 2-3, active high polarity bit 0-1 */
mp_irq.irqflag = 5;
mp_irq.srcbus = 0;
mp_irq.srcbusirq = pentry->irq; /* IRQ */
mp_irq.dstapic = MP_APIC_ALL;
mp_irq.dstirq = pentry->irq;
save_mp_irq(&mp_irq);
}
return 0;
}
struct sfi_timer_table_entry *sfi_get_mtmr(int hint)
{
int i;
if (hint < sfi_mtimer_num) {
if (!sfi_mtimer_usage[hint]) {
pr_debug("hint taken for timer %d irq %d\n",\
hint, sfi_mtimer_array[hint].irq);
sfi_mtimer_usage[hint] = 1;
return &sfi_mtimer_array[hint];
}
}
/* take the first timer available */
for (i = 0; i < sfi_mtimer_num;) {
if (!sfi_mtimer_usage[i]) {
sfi_mtimer_usage[i] = 1;
return &sfi_mtimer_array[i];
}
i++;
}
return NULL;
}
void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr)
{
int i;
for (i = 0; i < sfi_mtimer_num;) {
if (mtmr->irq == sfi_mtimer_array[i].irq) {
sfi_mtimer_usage[i] = 0;
return;
}
i++;
}
}
/* parse all the mrtc info to a global mrtc array */
int __init sfi_parse_mrtc(struct sfi_table_header *table)
{
struct sfi_table_simple *sb;
struct sfi_rtc_table_entry *pentry;
struct mpc_intsrc mp_irq;
int totallen;
sb = (struct sfi_table_simple *)table;
if (!sfi_mrtc_num) {
sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb,
struct sfi_rtc_table_entry);
pentry = (struct sfi_rtc_table_entry *)sb->pentry;
totallen = sfi_mrtc_num * sizeof(*pentry);
memcpy(sfi_mrtc_array, pentry, totallen);
}
printk(KERN_INFO "SFI: RTC info (num = %d):\n", sfi_mrtc_num);
pentry = sfi_mrtc_array;
for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) {
printk(KERN_INFO "RTC[%d]: paddr = 0x%08x, irq = %d\n",
totallen, (u32)pentry->phys_addr, pentry->irq);
mp_irq.type = MP_IOAPIC;
mp_irq.irqtype = mp_INT;
mp_irq.irqflag = 0;
mp_irq.srcbus = 0;
mp_irq.srcbusirq = pentry->irq; /* IRQ */
mp_irq.dstapic = MP_APIC_ALL;
mp_irq.dstirq = pentry->irq;
save_mp_irq(&mp_irq);
}
return 0;
}
/*
* the secondary clock in Moorestown can be APBT or LAPIC clock, default to
* APBT but cmdline option can also override it.
*/
static void __cpuinit mrst_setup_secondary_clock(void)
{
/* restore default lapic clock if disabled by cmdline */
if (disable_apbt_percpu)
return setup_secondary_APIC_clock();
apbt_setup_secondary_clock();
}
static unsigned long __init mrst_calibrate_tsc(void)
{
unsigned long flags, fast_calibrate;
local_irq_save(flags);
fast_calibrate = apbt_quick_calibrate();
local_irq_restore(flags);
if (fast_calibrate)
return fast_calibrate;
return 0;
}
void __init mrst_time_init(void)
{
sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
pre_init_apic_IRQ0();
apbt_time_init();
}
void __init mrst_rtc_init(void)
{
sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
}
/*
* if we use per cpu apb timer, the bootclock already setup. if we use lapic
* timer and one apbt timer for broadcast, we need to set up lapic boot clock.
*/
static void __init mrst_setup_boot_clock(void)
{
pr_info("%s: per cpu apbt flag %d \n", __func__, disable_apbt_percpu);
if (disable_apbt_percpu)
setup_boot_APIC_clock();
};
/*
* Moorestown specific x86_init function overrides and early setup
......@@ -21,4 +224,17 @@ void __init x86_mrst_early_setup(void)
{
x86_init.resources.probe_roms = x86_init_noop;
x86_init.resources.reserve_resources = x86_init_noop;
x86_init.timers.timer_init = mrst_time_init;
x86_init.timers.setup_percpu_clockev = mrst_setup_boot_clock;
x86_init.irqs.pre_vector_init = x86_init_noop;
x86_cpuinit.setup_percpu_clockev = mrst_setup_secondary_clock;
x86_platform.calibrate_tsc = mrst_calibrate_tsc;
x86_init.pci.init = pci_mrst_init;
x86_init.pci.fixup_irqs = x86_init_noop;
legacy_pic = &null_legacy_pic;
}
......@@ -17,7 +17,9 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/string.h>
#include <asm/geode.h>
#include <asm/setup.h>
#include <asm/olpc.h>
#ifdef CONFIG_OPEN_FIRMWARE
......@@ -243,9 +245,11 @@ static int __init olpc_init(void)
olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0,
(unsigned char *) &olpc_platform_info.ecver, 1);
/* check to see if the VSA exists */
if (cs5535_has_vsa2())
olpc_platform_info.flags |= OLPC_F_VSA;
#ifdef CONFIG_PCI_OLPC
/* If the VSA exists let it emulate PCI, if not emulate in kernel */
if (!cs5535_has_vsa2())
x86_init.pci.arch_init = pci_olpc_init;
#endif
printk(KERN_INFO "OLPC board revision %s%X (EC=%x)\n",
((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "",
......
......@@ -48,6 +48,7 @@
#include <linux/err.h>
#include <linux/nmi.h>
#include <linux/tboot.h>
#include <linux/stackprotector.h>
#include <asm/acpi.h>
#include <asm/desc.h>
......@@ -67,6 +68,7 @@
#include <linux/mc146818rtc.h>
#include <asm/smpboot_hooks.h>
#include <asm/i8259.h>
#ifdef CONFIG_X86_32
u8 apicid_2_node[MAX_APICID];
......@@ -291,9 +293,9 @@ notrace static void __cpuinit start_secondary(void *unused)
check_tsc_sync_target();
if (nmi_watchdog == NMI_IO_APIC) {
disable_8259A_irq(0);
legacy_pic->chip->mask(0);
enable_NMI_through_LVT0();
enable_8259A_irq(0);
legacy_pic->chip->unmask(0);
}
#ifdef CONFIG_X86_32
......@@ -329,6 +331,9 @@ notrace static void __cpuinit start_secondary(void *unused)
/* enable local interrupts */
local_irq_enable();
/* to prevent fake stack check failure in clock setup */
boot_init_stack_canary();
x86_cpuinit.setup_percpu_clockev();
wmb();
......
......@@ -49,11 +49,6 @@ extern int no_broadcast;
char visws_board_type = -1;
char visws_board_rev = -1;
int is_visws_box(void)
{
return visws_board_type >= 0;
}
static void __init visws_time_init(void)
{
printk(KERN_INFO "Starting Cobalt Timer system clock\n");
......@@ -242,6 +237,8 @@ void __init visws_early_detect(void)
x86_init.irqs.pre_vector_init = visws_pre_intr_init;
x86_init.irqs.trap_init = visws_trap_init;
x86_init.timers.timer_init = visws_time_init;
x86_init.pci.init = pci_visws_init;
x86_init.pci.init_irq = x86_init_noop;
/*
* Install reboot quirks:
......@@ -508,7 +505,7 @@ static struct irq_chip cobalt_irq_type = {
*/
static unsigned int startup_piix4_master_irq(unsigned int irq)
{
init_8259A(0);
legacy_pic->init(0);
return startup_cobalt_irq(irq);
}
......@@ -532,9 +529,6 @@ static struct irq_chip piix4_master_irq_type = {
static struct irq_chip piix4_virtual_irq_type = {
.name = "PIIX4-virtual",
.shutdown = disable_8259A_irq,
.enable = enable_8259A_irq,
.disable = disable_8259A_irq,
};
......@@ -609,7 +603,7 @@ static irqreturn_t piix4_master_intr(int irq, void *dev_id)
handle_IRQ_event(realirq, desc->action);
if (!(desc->status & IRQ_DISABLED))
enable_8259A_irq(realirq);
legacy_pic->chip->unmask(realirq);
return IRQ_HANDLED;
......@@ -628,6 +622,12 @@ static struct irqaction cascade_action = {
.name = "cascade",
};
static inline void set_piix4_virtual_irq_type(void)
{
piix4_virtual_irq_type.shutdown = i8259A_chip.mask;
piix4_virtual_irq_type.enable = i8259A_chip.unmask;
piix4_virtual_irq_type.disable = i8259A_chip.mask;
}
void init_VISWS_APIC_irqs(void)
{
......@@ -653,6 +653,7 @@ void init_VISWS_APIC_irqs(void)
desc->chip = &piix4_master_irq_type;
}
else if (i < CO_IRQ_APIC0) {
set_piix4_virtual_irq_type();
desc->chip = &piix4_virtual_irq_type;
}
else if (IS_CO_APIC(i)) {
......
......@@ -4,9 +4,11 @@
* For licencing details see kernel-base/COPYING
*/
#include <linux/init.h>
#include <linux/ioport.h>
#include <asm/bios_ebda.h>
#include <asm/paravirt.h>
#include <asm/pci_x86.h>
#include <asm/mpspec.h>
#include <asm/setup.h>
#include <asm/apic.h>
......@@ -70,6 +72,12 @@ struct x86_init_ops x86_init __initdata = {
.iommu = {
.iommu_init = iommu_init_noop,
},
.pci = {
.init = x86_default_pci_init,
.init_irq = x86_default_pci_init_irq,
.fixup_irqs = x86_default_pci_fixup_irqs,
},
};
struct x86_cpuinit_ops x86_cpuinit __cpuinitdata = {
......
......@@ -13,6 +13,8 @@ obj-$(CONFIG_X86_VISWS) += visws.o
obj-$(CONFIG_X86_NUMAQ) += numaq_32.o
obj-$(CONFIG_X86_MRST) += mrst.o
obj-y += common.o early.o
obj-y += amd_bus.o bus_numa.o
......
......@@ -298,17 +298,14 @@ int __init pci_acpi_init(void)
{
struct pci_dev *dev = NULL;
if (pcibios_scanned)
return 0;
if (acpi_noirq)
return 0;
return -ENODEV;
printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n");
acpi_irq_penalty_init();
pcibios_scanned++;
pcibios_enable_irq = acpi_pci_irq_enable;
pcibios_disable_irq = acpi_pci_irq_disable;
x86_init.pci.init_irq = x86_init_noop;
if (pci_routeirq) {
/*
......
......@@ -71,12 +71,6 @@ struct pci_ops pci_root_ops = {
.write = pci_write,
};
/*
* legacy, numa, and acpi all want to call pcibios_scan_root
* from their initcalls. This flag prevents that.
*/
int pcibios_scanned;
/*
* This interrupt-safe spinlock protects all accesses to PCI
* configuration space.
......
#include <linux/pci.h>
#include <linux/init.h>
#include <asm/pci_x86.h>
#include <asm/x86_init.h>
/* arch_initcall has too random ordering, so call the initializers
in the right sequence from here. */
......@@ -15,10 +16,9 @@ static __init int pci_arch_init(void)
if (!(pci_probe & PCI_PROBE_NOEARLY))
pci_mmcfg_early_init();
#ifdef CONFIG_PCI_OLPC
if (!pci_olpc_init())
return 0; /* skip additional checks if it's an XO */
#endif
if (x86_init.pci.arch_init && !x86_init.pci.arch_init())
return 0;
#ifdef CONFIG_PCI_BIOS
pci_pcbios_init();
#endif
......
......@@ -53,7 +53,7 @@ struct irq_router_handler {
int (*probe)(struct irq_router *r, struct pci_dev *router, u16 device);
};
int (*pcibios_enable_irq)(struct pci_dev *dev) = NULL;
int (*pcibios_enable_irq)(struct pci_dev *dev) = pirq_enable_irq;
void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL;
/*
......@@ -1018,7 +1018,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
return 1;
}
static void __init pcibios_fixup_irqs(void)
void __init pcibios_fixup_irqs(void)
{
struct pci_dev *dev = NULL;
u8 pin;
......@@ -1112,12 +1112,12 @@ static struct dmi_system_id __initdata pciirq_dmi_table[] = {
{ }
};
int __init pcibios_irq_init(void)
void __init pcibios_irq_init(void)
{
DBG(KERN_DEBUG "PCI: IRQ init\n");
if (pcibios_enable_irq || raw_pci_ops == NULL)
return 0;
if (raw_pci_ops == NULL)
return;
dmi_check_system(pciirq_dmi_table);
......@@ -1144,9 +1144,7 @@ int __init pcibios_irq_init(void)
pirq_table = NULL;
}
pcibios_enable_irq = pirq_enable_irq;
pcibios_fixup_irqs();
x86_init.pci.fixup_irqs();
if (io_apic_assign_pci_irqs && pci_routeirq) {
struct pci_dev *dev = NULL;
......@@ -1159,8 +1157,6 @@ int __init pcibios_irq_init(void)
for_each_pci_dev(dev)
pirq_enable_irq(dev);
}
return 0;
}
static void pirq_penalize_isa_irq(int irq, int active)
......
......@@ -35,16 +35,13 @@ static void __devinit pcibios_fixup_peer_bridges(void)
}
}
static int __init pci_legacy_init(void)
int __init pci_legacy_init(void)
{
if (!raw_pci_ops) {
printk("PCI: System does not support PCI\n");
return 0;
}
if (pcibios_scanned++)
return 0;
printk("PCI: Probing PCI hardware\n");
pci_root_bus = pcibios_scan_root(0);
if (pci_root_bus)
......@@ -55,18 +52,15 @@ static int __init pci_legacy_init(void)
int __init pci_subsys_init(void)
{
#ifdef CONFIG_X86_NUMAQ
pci_numaq_init();
#endif
#ifdef CONFIG_ACPI
pci_acpi_init();
#endif
#ifdef CONFIG_X86_VISWS
pci_visws_init();
#endif
/*
* The init function returns an non zero value when
* pci_legacy_init should be invoked.
*/
if (x86_init.pci.init())
pci_legacy_init();
pcibios_fixup_peer_bridges();
pcibios_irq_init();
x86_init.pci.init_irq();
pcibios_init();
return 0;
......
/*
* Moorestown PCI support
* Copyright (c) 2008 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
*
* Moorestown has an interesting PCI implementation:
* - configuration space is memory mapped (as defined by MCFG)
* - Lincroft devices also have a real, type 1 configuration space
* - Early Lincroft silicon has a type 1 access bug that will cause
* a hang if non-existent devices are accessed
* - some devices have the "fixed BAR" capability, which means
* they can't be relocated or modified; check for that during
* BAR sizing
*
* So, we use the MCFG space for all reads and writes, but also send
* Lincroft writes to type 1 space. But only read/write if the device
* actually exists, otherwise return all 1s for reads and bit bucket
* the writes.
*/
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/dmi.h>
#include <asm/acpi.h>
#include <asm/segment.h>
#include <asm/io.h>
#include <asm/smp.h>
#include <asm/pci_x86.h>
#include <asm/hw_irq.h>
#include <asm/io_apic.h>
#define PCIE_CAP_OFFSET 0x100
/* Fixed BAR fields */
#define PCIE_VNDR_CAP_ID_FIXED_BAR 0x00 /* Fixed BAR (TBD) */
#define PCI_FIXED_BAR_0_SIZE 0x04
#define PCI_FIXED_BAR_1_SIZE 0x08
#define PCI_FIXED_BAR_2_SIZE 0x0c
#define PCI_FIXED_BAR_3_SIZE 0x10
#define PCI_FIXED_BAR_4_SIZE 0x14
#define PCI_FIXED_BAR_5_SIZE 0x1c
/**
* fixed_bar_cap - return the offset of the fixed BAR cap if found
* @bus: PCI bus
* @devfn: device in question
*
* Look for the fixed BAR cap on @bus and @devfn, returning its offset
* if found or 0 otherwise.
*/
static int fixed_bar_cap(struct pci_bus *bus, unsigned int devfn)
{
int pos;
u32 pcie_cap = 0, cap_data;
pos = PCIE_CAP_OFFSET;
if (!raw_pci_ext_ops)
return 0;
while (pos) {
if (raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
devfn, pos, 4, &pcie_cap))
return 0;
if (pcie_cap == 0xffffffff)
return 0;
if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) {
raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
devfn, pos + 4, 4, &cap_data);
if ((cap_data & 0xffff) == PCIE_VNDR_CAP_ID_FIXED_BAR)
return pos;
}
pos = pcie_cap >> 20;
}
return 0;
}
static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn,
int reg, int len, u32 val, int offset)
{
u32 size;
unsigned int domain, busnum;
int bar = (reg - PCI_BASE_ADDRESS_0) >> 2;
domain = pci_domain_nr(bus);
busnum = bus->number;
if (val == ~0 && len == 4) {
unsigned long decode;
raw_pci_ext_ops->read(domain, busnum, devfn,
offset + 8 + (bar * 4), 4, &size);
/* Turn the size into a decode pattern for the sizing code */
if (size) {
decode = size - 1;
decode |= decode >> 1;
decode |= decode >> 2;
decode |= decode >> 4;
decode |= decode >> 8;
decode |= decode >> 16;
decode++;
decode = ~(decode - 1);
} else {
decode = ~0;
}
/*
* If val is all ones, the core code is trying to size the reg,
* so update the mmconfig space with the real size.
*
* Note: this assumes the fixed size we got is a power of two.
*/
return raw_pci_ext_ops->write(domain, busnum, devfn, reg, 4,
decode);
}
/* This is some other kind of BAR write, so just do it. */
return raw_pci_ext_ops->write(domain, busnum, devfn, reg, len, val);
}
/**
* type1_access_ok - check whether to use type 1
* @bus: bus number
* @devfn: device & function in question
*
* If the bus is on a Lincroft chip and it exists, or is not on a Lincroft at
* all, the we can go ahead with any reads & writes. If it's on a Lincroft,
* but doesn't exist, avoid the access altogether to keep the chip from
* hanging.
*/
static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
{
/* This is a workaround for A0 LNC bug where PCI status register does
* not have new CAP bit set. can not be written by SW either.
*
* PCI header type in real LNC indicates a single function device, this
* will prevent probing other devices under the same function in PCI
* shim. Therefore, use the header type in shim instead.
*/
if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE)
return 0;
if (bus == 0 && (devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(0, 0)))
return 1;
return 0; /* langwell on others */
}
static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 *value)
{
if (type1_access_ok(bus->number, devfn, where))
return pci_direct_conf1.read(pci_domain_nr(bus), bus->number,
devfn, where, size, value);
return raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
devfn, where, size, value);
}
static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 value)
{
int offset;
/* On MRST, there is no PCI ROM BAR, this will cause a subsequent read
* to ROM BAR return 0 then being ignored.
*/
if (where == PCI_ROM_ADDRESS)
return 0;
/*
* Devices with fixed BARs need special handling:
* - BAR sizing code will save, write ~0, read size, restore
* - so writes to fixed BARs need special handling
* - other writes to fixed BAR devices should go through mmconfig
*/
offset = fixed_bar_cap(bus, devfn);
if (offset &&
(where >= PCI_BASE_ADDRESS_0 && where <= PCI_BASE_ADDRESS_5)) {
return pci_device_update_fixed(bus, devfn, where, size, value,
offset);
}
/*
* On Moorestown update both real & mmconfig space
* Note: early Lincroft silicon can't handle type 1 accesses to
* non-existent devices, so just eat the write in that case.
*/
if (type1_access_ok(bus->number, devfn, where))
return pci_direct_conf1.write(pci_domain_nr(bus), bus->number,
devfn, where, size, value);
return raw_pci_ext_ops->write(pci_domain_nr(bus), bus->number, devfn,
where, size, value);
}
static int mrst_pci_irq_enable(struct pci_dev *dev)
{
u8 pin;
struct io_apic_irq_attr irq_attr;
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
/* MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
* IOAPIC RTE entries, so we just enable RTE for the device.
*/
irq_attr.ioapic = mp_find_ioapic(dev->irq);
irq_attr.ioapic_pin = dev->irq;
irq_attr.trigger = 1; /* level */
irq_attr.polarity = 1; /* active low */
io_apic_set_pci_routing(&dev->dev, dev->irq, &irq_attr);
return 0;
}
struct pci_ops pci_mrst_ops = {
.read = pci_read,
.write = pci_write,
};
/**
* pci_mrst_init - installs pci_mrst_ops
*
* Moorestown has an interesting PCI implementation (see above).
* Called when the early platform detection installs it.
*/
int __init pci_mrst_init(void)
{
printk(KERN_INFO "Moorestown platform detected, using MRST PCI ops\n");
pci_mmcfg_late_init();
pcibios_enable_irq = mrst_pci_irq_enable;
pci_root_ops = pci_mrst_ops;
/* Continue with standard init */
return 1;
}
/*
* Langwell devices reside at fixed offsets, don't try to move them.
*/
static void __devinit pci_fixed_bar_fixup(struct pci_dev *dev)
{
unsigned long offset;
u32 size;
int i;
/* Fixup the BAR sizes for fixed BAR devices and make them unmoveable */
offset = fixed_bar_cap(dev->bus, dev->devfn);
if (!offset || PCI_DEVFN(2, 0) == dev->devfn ||
PCI_DEVFN(2, 2) == dev->devfn)
return;
for (i = 0; i < PCI_ROM_RESOURCE; i++) {
pci_read_config_dword(dev, offset + 8 + (i * 4), &size);
dev->resource[i].end = dev->resource[i].start + size - 1;
dev->resource[i].flags |= IORESOURCE_PCI_FIXED;
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixed_bar_fixup);
......@@ -148,14 +148,8 @@ int __init pci_numaq_init(void)
{
int quad;
if (!found_numaq)
return 0;
raw_pci_ops = &pci_direct_conf1_mq;
if (pcibios_scanned++)
return 0;
pci_root_bus = pcibios_scan_root(0);
if (pci_root_bus)
pci_bus_add_devices(pci_root_bus);
......
......@@ -304,9 +304,6 @@ static struct pci_raw_ops pci_olpc_conf = {
int __init pci_olpc_init(void)
{
if (!machine_is_olpc() || olpc_has_vsa())
return -ENODEV;
printk(KERN_INFO "PCI: Using configuration type OLPC\n");
raw_pci_ops = &pci_olpc_conf;
is_lx = is_geode_lx();
......
......@@ -69,9 +69,6 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq)
int __init pci_visws_init(void)
{
if (!is_visws_box())
return -1;
pcibios_enable_irq = &pci_visws_enable_irq;
pcibios_disable_irq = &pci_visws_disable_irq;
......@@ -90,5 +87,6 @@ int __init pci_visws_init(void)
pci_scan_bus_with_sysdata(pci_bus1);
pci_fixup_irqs(pci_common_swizzle, visws_map_irq);
pcibios_resource_survey();
return 0;
/* Request bus scan */
return 1;
}
......@@ -303,6 +303,49 @@ int pci_find_ext_capability(struct pci_dev *dev, int cap)
}
EXPORT_SYMBOL_GPL(pci_find_ext_capability);
/**
* pci_bus_find_ext_capability - find an extended capability
* @bus: the PCI bus to query
* @devfn: PCI device to query
* @cap: capability code
*
* Like pci_find_ext_capability() but works for pci devices that do not have a
* pci_dev structure set up yet.
*
* Returns the address of the requested capability structure within the
* device's PCI configuration space or 0 in case the device does not
* support it.
*/
int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn,
int cap)
{
u32 header;
int ttl;
int pos = PCI_CFG_SPACE_SIZE;
/* minimum 8 bytes per capability */
ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8;
if (!pci_bus_read_config_dword(bus, devfn, pos, &header))
return 0;
if (header == 0xffffffff || header == 0)
return 0;
while (ttl-- > 0) {
if (PCI_EXT_CAP_ID(header) == cap)
return pos;
pos = PCI_EXT_CAP_NEXT(header);
if (pos < PCI_CFG_SPACE_SIZE)
break;
if (!pci_bus_read_config_dword(bus, devfn, pos, &header))
break;
}
return 0;
}
static int __pci_find_next_ht_cap(struct pci_dev *dev, int pos, int ht_cap)
{
int rc, ttl = PCI_FIND_CAP_TTL;
......
......@@ -678,6 +678,8 @@ enum pci_lost_interrupt_reason pci_lost_interrupt(struct pci_dev *dev);
int pci_find_capability(struct pci_dev *dev, int cap);
int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap);
int pci_find_ext_capability(struct pci_dev *dev, int cap);
int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn,
int cap);
int pci_find_ht_capability(struct pci_dev *dev, int ht_cap);
int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap);
struct pci_bus *pci_find_next_bus(const struct pci_bus *from);
......
......@@ -507,6 +507,7 @@
#define PCI_EXT_CAP_ID_VC 2
#define PCI_EXT_CAP_ID_DSN 3
#define PCI_EXT_CAP_ID_PWR 4
#define PCI_EXT_CAP_ID_VNDR 11
#define PCI_EXT_CAP_ID_ACS 13
#define PCI_EXT_CAP_ID_ARI 14
#define PCI_EXT_CAP_ID_ATS 15
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment