Commit 32cbd7df authored by Huang Ying's avatar Huang Ying Committed by Herbert Xu

crypto: aesni-intel - Fix CTR optimization build failure with gas 2.16.1

Andrew Morton reported that AES-NI CTR optimization failed to compile
with gas 2.16.1, the error message is as follow:

arch/x86/crypto/aesni-intel_asm.S: Assembler messages:
arch/x86/crypto/aesni-intel_asm.S:752: Error: suffix or operands invalid for `movq'
arch/x86/crypto/aesni-intel_asm.S:753: Error: suffix or operands invalid for `movq'

To fix this, a gas macro is defined to assemble movq with 64bit
general purpose registers and XMM registers. The macro will generate
the raw .byte sequence for needed instructions.
Reported-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarHuang Ying <ying.huang@intel.com>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
parent 18bcc919
......@@ -749,8 +749,8 @@ _aesni_inc_init:
movaps IV, CTR
PSHUFB_XMM BSWAP_MASK CTR
mov $1, TCTR_LOW
movq TCTR_LOW, INC
movq CTR, TCTR_LOW
MOVQ_R64_XMM TCTR_LOW INC
MOVQ_R64_XMM CTR TCTR_LOW
ret
/*
......
......@@ -7,7 +7,66 @@
#ifdef __ASSEMBLY__
#define REG_NUM_INVALID 100
#define REG_TYPE_R64 0
#define REG_TYPE_XMM 1
#define REG_TYPE_INVALID 100
.macro R64_NUM opd r64
\opd = REG_NUM_INVALID
.ifc \r64,%rax
\opd = 0
.endif
.ifc \r64,%rcx
\opd = 1
.endif
.ifc \r64,%rdx
\opd = 2
.endif
.ifc \r64,%rbx
\opd = 3
.endif
.ifc \r64,%rsp
\opd = 4
.endif
.ifc \r64,%rbp
\opd = 5
.endif
.ifc \r64,%rsi
\opd = 6
.endif
.ifc \r64,%rdi
\opd = 7
.endif
.ifc \r64,%r8
\opd = 8
.endif
.ifc \r64,%r9
\opd = 9
.endif
.ifc \r64,%r10
\opd = 10
.endif
.ifc \r64,%r11
\opd = 11
.endif
.ifc \r64,%r12
\opd = 12
.endif
.ifc \r64,%r13
\opd = 13
.endif
.ifc \r64,%r14
\opd = 14
.endif
.ifc \r64,%r15
\opd = 15
.endif
.endm
.macro XMM_NUM opd xmm
\opd = REG_NUM_INVALID
.ifc \xmm,%xmm0
\opd = 0
.endif
......@@ -58,13 +117,25 @@
.endif
.endm
.macro REG_TYPE type reg
R64_NUM reg_type_r64 \reg
XMM_NUM reg_type_xmm \reg
.if reg_type_r64 != REG_NUM_INVALID
\type = REG_TYPE_R64
.elseif reg_type_xmm != REG_NUM_INVALID
\type = REG_TYPE_XMM
.else
\type = REG_TYPE_INVALID
.endif
.endm
.macro PFX_OPD_SIZE
.byte 0x66
.endm
.macro PFX_REX opd1 opd2
.if (\opd1 | \opd2) & 8
.byte 0x40 | ((\opd1 & 8) >> 3) | ((\opd2 & 8) >> 1)
.macro PFX_REX opd1 opd2 W=0
.if ((\opd1 | \opd2) & 8) || \W
.byte 0x40 | ((\opd1 & 8) >> 3) | ((\opd2 & 8) >> 1) | (\W << 3)
.endif
.endm
......@@ -145,6 +216,25 @@
.byte 0x0f, 0x38, 0xdf
MODRM 0xc0 aesdeclast_opd1 aesdeclast_opd2
.endm
.macro MOVQ_R64_XMM opd1 opd2
REG_TYPE movq_r64_xmm_opd1_type \opd1
.if movq_r64_xmm_opd1_type == REG_TYPE_XMM
XMM_NUM movq_r64_xmm_opd1 \opd1
R64_NUM movq_r64_xmm_opd2 \opd2
.else
R64_NUM movq_r64_xmm_opd1 \opd1
XMM_NUM movq_r64_xmm_opd2 \opd2
.endif
PFX_OPD_SIZE
PFX_REX movq_r64_xmm_opd1 movq_r64_xmm_opd2 1
.if movq_r64_xmm_opd1_type == REG_TYPE_XMM
.byte 0x0f, 0x7e
.else
.byte 0x0f, 0x6e
.endif
MODRM 0xc0 movq_r64_xmm_opd1 movq_r64_xmm_opd2
.endm
#endif
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment