Commit 32cdd592 authored by John W. Linville's avatar John W. Linville

Merge branch 'master' of...

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
parents 66d29cbc 4f21e7e4
......@@ -151,7 +151,7 @@ int iwl_send_add_sta(struct iwl_priv *priv,
sta_id, sta->sta.addr, flags & CMD_ASYNC ? "a" : "");
if (!(flags & CMD_ASYNC)) {
cmd.flags |= CMD_WANT_SKB | CMD_WANT_HCMD;
cmd.flags |= CMD_WANT_SKB;
might_sleep();
}
......
......@@ -363,7 +363,7 @@ TRACE_EVENT(iwlwifi_dev_hcmd,
__entry->flags = cmd->flags;
memcpy(__get_dynamic_array(hcmd), hdr, sizeof(*hdr));
for (i = 0; i < IWL_MAX_CMD_TFDS; i++) {
for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) {
if (!cmd->len[i])
continue;
memcpy((u8 *)__get_dynamic_array(hcmd) + offset,
......
......@@ -1102,7 +1102,6 @@ void iwl_drv_stop(struct iwl_drv *drv)
/* shared module parameters */
struct iwl_mod_params iwlwifi_mod_params = {
.amsdu_size_8K = 1,
.restart_fw = 1,
.plcp_check = true,
.bt_coex_active = true,
......@@ -1207,7 +1206,7 @@ MODULE_PARM_DESC(11n_disable,
"disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX");
module_param_named(amsdu_size_8K, iwlwifi_mod_params.amsdu_size_8K,
int, S_IRUGO);
MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size (default 0)");
module_param_named(fw_restart, iwlwifi_mod_params.restart_fw, int, S_IRUGO);
MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
......
......@@ -91,7 +91,7 @@ enum iwl_power_level {
* @sw_crypto: using hardware encryption, default = 0
* @disable_11n: disable 11n capabilities, default = 0,
* use IWL_DISABLE_HT_* constants
* @amsdu_size_8K: enable 8K amsdu size, default = 1
* @amsdu_size_8K: enable 8K amsdu size, default = 0
* @restart_fw: restart firmware, default = 1
* @plcp_check: enable plcp health check, default = true
* @wd_disable: enable stuck queue check, default = 0
......
......@@ -186,19 +186,13 @@ struct iwl_rx_packet {
* @CMD_ASYNC: Return right away and don't want for the response
* @CMD_WANT_SKB: valid only with CMD_SYNC. The caller needs the buffer of the
* response. The caller needs to call iwl_free_resp when done.
* @CMD_WANT_HCMD: The caller needs to get the HCMD that was sent in the
* response handler. Chunks flagged by %IWL_HCMD_DFL_NOCOPY won't be
* copied. The pointer passed to the response handler is in the transport
* ownership and don't need to be freed by the op_mode. This also means
* that the pointer is invalidated after the op_mode's handler returns.
* @CMD_ON_DEMAND: This command is sent by the test mode pipe.
*/
enum CMD_MODE {
CMD_SYNC = 0,
CMD_ASYNC = BIT(0),
CMD_WANT_SKB = BIT(1),
CMD_WANT_HCMD = BIT(2),
CMD_ON_DEMAND = BIT(3),
CMD_ON_DEMAND = BIT(2),
};
#define DEF_CMD_PAYLOAD_SIZE 320
......@@ -217,7 +211,11 @@ struct iwl_device_cmd {
#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
#define IWL_MAX_CMD_TFDS 2
/*
* number of transfer buffers (fragments) per transmit frame descriptor;
* this is just the driver's idea, the hardware supports 20
*/
#define IWL_MAX_CMD_TBS_PER_TFD 2
/**
* struct iwl_hcmd_dataflag - flag for each one of the chunks of the command
......@@ -254,15 +252,15 @@ enum iwl_hcmd_dataflag {
* @id: id of the host command
*/
struct iwl_host_cmd {
const void *data[IWL_MAX_CMD_TFDS];
const void *data[IWL_MAX_CMD_TBS_PER_TFD];
struct iwl_rx_packet *resp_pkt;
unsigned long _rx_page_addr;
u32 _rx_page_order;
int handler_status;
u32 flags;
u16 len[IWL_MAX_CMD_TFDS];
u8 dataflags[IWL_MAX_CMD_TFDS];
u16 len[IWL_MAX_CMD_TBS_PER_TFD];
u8 dataflags[IWL_MAX_CMD_TBS_PER_TFD];
u8 id;
};
......
......@@ -762,18 +762,20 @@ struct iwl_phy_context_cmd {
#define IWL_RX_INFO_PHY_CNT 8
#define IWL_RX_INFO_AGC_IDX 1
#define IWL_RX_INFO_RSSI_AB_IDX 2
#define IWL_RX_INFO_RSSI_C_IDX 3
#define IWL_OFDM_AGC_DB_MSK 0xfe00
#define IWL_OFDM_AGC_DB_POS 9
#define IWL_OFDM_AGC_A_MSK 0x0000007f
#define IWL_OFDM_AGC_A_POS 0
#define IWL_OFDM_AGC_B_MSK 0x00003f80
#define IWL_OFDM_AGC_B_POS 7
#define IWL_OFDM_AGC_CODE_MSK 0x3fe00000
#define IWL_OFDM_AGC_CODE_POS 20
#define IWL_OFDM_RSSI_INBAND_A_MSK 0x00ff
#define IWL_OFDM_RSSI_ALLBAND_A_MSK 0xff00
#define IWL_OFDM_RSSI_A_POS 0
#define IWL_OFDM_RSSI_ALLBAND_A_MSK 0xff00
#define IWL_OFDM_RSSI_ALLBAND_A_POS 8
#define IWL_OFDM_RSSI_INBAND_B_MSK 0xff0000
#define IWL_OFDM_RSSI_ALLBAND_B_MSK 0xff000000
#define IWL_OFDM_RSSI_B_POS 16
#define IWL_OFDM_RSSI_INBAND_C_MSK 0x00ff
#define IWL_OFDM_RSSI_ALLBAND_C_MSK 0xff00
#define IWL_OFDM_RSSI_C_POS 0
#define IWL_OFDM_RSSI_ALLBAND_B_MSK 0xff000000
#define IWL_OFDM_RSSI_ALLBAND_B_POS 24
/**
* struct iwl_rx_phy_info - phy info
......
......@@ -79,17 +79,8 @@
#define UCODE_VALID_OK cpu_to_le32(0x1)
/* Default calibration values for WkP - set to INIT image w/o running */
static const u8 wkp_calib_values_bb_filter[] = { 0xbf, 0x00, 0x5f, 0x00, 0x2f,
0x00, 0x18, 0x00 };
static const u8 wkp_calib_values_rx_dc[] = { 0x7f, 0x7f, 0x7f, 0x7f, 0x7f,
0x7f, 0x7f, 0x7f };
static const u8 wkp_calib_values_tx_lo[] = { 0x00, 0x00, 0x00, 0x00 };
static const u8 wkp_calib_values_tx_iq[] = { 0xff, 0x00, 0xff, 0x00, 0x00,
0x00 };
static const u8 wkp_calib_values_rx_iq[] = { 0xff, 0x00, 0x00, 0x00 };
static const u8 wkp_calib_values_rx_iq_skew[] = { 0x00, 0x00, 0x01, 0x00 };
static const u8 wkp_calib_values_tx_iq_skew[] = { 0x01, 0x00, 0x00, 0x00 };
static const u8 wkp_calib_values_xtal[] = { 0xd2, 0xd2 };
struct iwl_calib_default_data {
u16 size;
......@@ -99,12 +90,7 @@ struct iwl_calib_default_data {
#define CALIB_SIZE_N_DATA(_buf) {.size = sizeof(_buf), .data = &_buf}
static const struct iwl_calib_default_data wkp_calib_default_data[12] = {
[5] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_dc),
[6] = CALIB_SIZE_N_DATA(wkp_calib_values_bb_filter),
[7] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_lo),
[8] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_iq),
[9] = CALIB_SIZE_N_DATA(wkp_calib_values_tx_iq_skew),
[10] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_iq),
[11] = CALIB_SIZE_N_DATA(wkp_calib_values_rx_iq_skew),
};
......@@ -241,20 +227,6 @@ static int iwl_mvm_load_ucode_wait_alive(struct iwl_mvm *mvm,
return 0;
}
#define IWL_HW_REV_ID_RAINBOW 0x2
#define IWL_PROJ_TYPE_LHP 0x5
static u32 iwl_mvm_build_phy_cfg(struct iwl_mvm *mvm)
{
struct iwl_nvm_data *data = mvm->nvm_data;
/* Temp calls to static definitions, will be changed to CSR calls */
u8 hw_rev_id = IWL_HW_REV_ID_RAINBOW;
u8 project_type = IWL_PROJ_TYPE_LHP;
return data->radio_cfg_dash | (data->radio_cfg_step << 2) |
(hw_rev_id << 4) | ((project_type & 0x7f) << 6) |
(data->valid_tx_ant << 16) | (data->valid_rx_ant << 20);
}
static int iwl_send_phy_cfg_cmd(struct iwl_mvm *mvm)
{
......@@ -262,7 +234,7 @@ static int iwl_send_phy_cfg_cmd(struct iwl_mvm *mvm)
enum iwl_ucode_type ucode_type = mvm->cur_ucode;
/* Set parameters */
phy_cfg_cmd.phy_cfg = cpu_to_le32(iwl_mvm_build_phy_cfg(mvm));
phy_cfg_cmd.phy_cfg = cpu_to_le32(mvm->fw->phy_config);
phy_cfg_cmd.calib_control.event_trigger =
mvm->fw->default_calib[ucode_type].event_trigger;
phy_cfg_cmd.calib_control.flow_trigger =
......@@ -275,103 +247,6 @@ static int iwl_send_phy_cfg_cmd(struct iwl_mvm *mvm)
sizeof(phy_cfg_cmd), &phy_cfg_cmd);
}
/* Starting with the new PHY DB implementation - New calibs are enabled */
/* Value - 0x405e7 */
#define IWL_CALIB_DEFAULT_FLOW_INIT (IWL_CALIB_CFG_XTAL_IDX |\
IWL_CALIB_CFG_TEMPERATURE_IDX |\
IWL_CALIB_CFG_VOLTAGE_READ_IDX |\
IWL_CALIB_CFG_DC_IDX |\
IWL_CALIB_CFG_BB_FILTER_IDX |\
IWL_CALIB_CFG_LO_LEAKAGE_IDX |\
IWL_CALIB_CFG_TX_IQ_IDX |\
IWL_CALIB_CFG_RX_IQ_IDX |\
IWL_CALIB_CFG_AGC_IDX)
#define IWL_CALIB_DEFAULT_EVENT_INIT 0x0
/* Value 0x41567 */
#define IWL_CALIB_DEFAULT_FLOW_RUN (IWL_CALIB_CFG_XTAL_IDX |\
IWL_CALIB_CFG_TEMPERATURE_IDX |\
IWL_CALIB_CFG_VOLTAGE_READ_IDX |\
IWL_CALIB_CFG_BB_FILTER_IDX |\
IWL_CALIB_CFG_DC_IDX |\
IWL_CALIB_CFG_TX_IQ_IDX |\
IWL_CALIB_CFG_RX_IQ_IDX |\
IWL_CALIB_CFG_SENSITIVITY_IDX |\
IWL_CALIB_CFG_AGC_IDX)
#define IWL_CALIB_DEFAULT_EVENT_RUN (IWL_CALIB_CFG_XTAL_IDX |\
IWL_CALIB_CFG_TEMPERATURE_IDX |\
IWL_CALIB_CFG_VOLTAGE_READ_IDX |\
IWL_CALIB_CFG_TX_PWR_IDX |\
IWL_CALIB_CFG_DC_IDX |\
IWL_CALIB_CFG_TX_IQ_IDX |\
IWL_CALIB_CFG_SENSITIVITY_IDX)
/*
* Sets the calibrations trigger values that will be sent to the FW for runtime
* and init calibrations.
* The ones given in the FW TLV are not correct.
*/
static void iwl_set_default_calib_trigger(struct iwl_mvm *mvm)
{
struct iwl_tlv_calib_ctrl default_calib;
/*
* WkP FW TLV calib bits are wrong, overwrite them.
* This defines the dynamic calibrations which are implemented in the
* uCode both for init(flow) calculation and event driven calibs.
*/
/* Init Image */
default_calib.event_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_EVENT_INIT);
default_calib.flow_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_FLOW_INIT);
if (default_calib.event_trigger !=
mvm->fw->default_calib[IWL_UCODE_INIT].event_trigger)
IWL_ERR(mvm,
"Updating the event calib for INIT image: 0x%x -> 0x%x\n",
mvm->fw->default_calib[IWL_UCODE_INIT].event_trigger,
default_calib.event_trigger);
if (default_calib.flow_trigger !=
mvm->fw->default_calib[IWL_UCODE_INIT].flow_trigger)
IWL_ERR(mvm,
"Updating the flow calib for INIT image: 0x%x -> 0x%x\n",
mvm->fw->default_calib[IWL_UCODE_INIT].flow_trigger,
default_calib.flow_trigger);
memcpy((void *)&mvm->fw->default_calib[IWL_UCODE_INIT],
&default_calib, sizeof(struct iwl_tlv_calib_ctrl));
IWL_ERR(mvm,
"Setting uCode init calibrations event 0x%x, trigger 0x%x\n",
default_calib.event_trigger,
default_calib.flow_trigger);
/* Run time image */
default_calib.event_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_EVENT_RUN);
default_calib.flow_trigger = cpu_to_le32(IWL_CALIB_DEFAULT_FLOW_RUN);
if (default_calib.event_trigger !=
mvm->fw->default_calib[IWL_UCODE_REGULAR].event_trigger)
IWL_ERR(mvm,
"Updating the event calib for RT image: 0x%x -> 0x%x\n",
mvm->fw->default_calib[IWL_UCODE_REGULAR].event_trigger,
default_calib.event_trigger);
if (default_calib.flow_trigger !=
mvm->fw->default_calib[IWL_UCODE_REGULAR].flow_trigger)
IWL_ERR(mvm,
"Updating the flow calib for RT image: 0x%x -> 0x%x\n",
mvm->fw->default_calib[IWL_UCODE_REGULAR].flow_trigger,
default_calib.flow_trigger);
memcpy((void *)&mvm->fw->default_calib[IWL_UCODE_REGULAR],
&default_calib, sizeof(struct iwl_tlv_calib_ctrl));
IWL_ERR(mvm,
"Setting uCode runtime calibs event 0x%x, trigger 0x%x\n",
default_calib.event_trigger,
default_calib.flow_trigger);
}
static int iwl_set_default_calibrations(struct iwl_mvm *mvm)
{
u8 cmd_raw[16]; /* holds the variable size commands */
......@@ -446,8 +321,10 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
ret = iwl_nvm_check_version(mvm->nvm_data, mvm->trans);
WARN_ON(ret);
/* Override the calibrations from TLV and the const of fw */
iwl_set_default_calib_trigger(mvm);
/* Send TX valid antennas before triggering calibrations */
ret = iwl_send_tx_ant_cfg(mvm, mvm->nvm_data->valid_tx_ant);
if (ret)
goto error;
/* WkP doesn't have all calibrations, need to set default values */
if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) {
......
......@@ -80,7 +80,8 @@
#define IWL_INVALID_MAC80211_QUEUE 0xff
#define IWL_MVM_MAX_ADDRESSES 2
#define IWL_RSSI_OFFSET 44
/* RSSI offset for WkP */
#define IWL_RSSI_OFFSET 50
enum iwl_mvm_tx_fifo {
IWL_MVM_TX_FIFO_BK = 0,
......
......@@ -624,12 +624,8 @@ static void iwl_mvm_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb)
ieee80211_free_txskb(mvm->hw, skb);
}
static void iwl_mvm_nic_error(struct iwl_op_mode *op_mode)
static void iwl_mvm_nic_restart(struct iwl_mvm *mvm)
{
struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
iwl_mvm_dump_nic_error_log(mvm);
iwl_abort_notification_waits(&mvm->notif_wait);
/*
......@@ -663,9 +659,21 @@ static void iwl_mvm_nic_error(struct iwl_op_mode *op_mode)
}
}
static void iwl_mvm_nic_error(struct iwl_op_mode *op_mode)
{
struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
iwl_mvm_dump_nic_error_log(mvm);
iwl_mvm_nic_restart(mvm);
}
static void iwl_mvm_cmd_queue_full(struct iwl_op_mode *op_mode)
{
struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
WARN_ON(1);
iwl_mvm_nic_restart(mvm);
}
static const struct iwl_op_mode_ops iwl_mvm_ops = {
......
......@@ -131,33 +131,42 @@ static void iwl_mvm_pass_packet_to_mac80211(struct iwl_mvm *mvm,
static int iwl_mvm_calc_rssi(struct iwl_mvm *mvm,
struct iwl_rx_phy_info *phy_info)
{
u32 rssi_a, rssi_b, rssi_c, max_rssi, agc_db;
int rssi_a, rssi_b, rssi_a_dbm, rssi_b_dbm, max_rssi_dbm;
int rssi_all_band_a, rssi_all_band_b;
u32 agc_a, agc_b, max_agc;
u32 val;
/* Find max rssi among 3 possible receivers.
/* Find max rssi among 2 possible receivers.
* These values are measured by the Digital Signal Processor (DSP).
* They should stay fairly constant even as the signal strength varies,
* if the radio's Automatic Gain Control (AGC) is working right.
* AGC value (see below) will provide the "interesting" info.
*/
val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_AGC_IDX]);
agc_a = (val & IWL_OFDM_AGC_A_MSK) >> IWL_OFDM_AGC_A_POS;
agc_b = (val & IWL_OFDM_AGC_B_MSK) >> IWL_OFDM_AGC_B_POS;
max_agc = max_t(u32, agc_a, agc_b);
val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_RSSI_AB_IDX]);
rssi_a = (val & IWL_OFDM_RSSI_INBAND_A_MSK) >> IWL_OFDM_RSSI_A_POS;
rssi_b = (val & IWL_OFDM_RSSI_INBAND_B_MSK) >> IWL_OFDM_RSSI_B_POS;
val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_RSSI_C_IDX]);
rssi_c = (val & IWL_OFDM_RSSI_INBAND_C_MSK) >> IWL_OFDM_RSSI_C_POS;
val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_AGC_IDX]);
agc_db = (val & IWL_OFDM_AGC_DB_MSK) >> IWL_OFDM_AGC_DB_POS;
rssi_all_band_a = (val & IWL_OFDM_RSSI_ALLBAND_A_MSK) >>
IWL_OFDM_RSSI_ALLBAND_A_POS;
rssi_all_band_b = (val & IWL_OFDM_RSSI_ALLBAND_B_MSK) >>
IWL_OFDM_RSSI_ALLBAND_B_POS;
max_rssi = max_t(u32, rssi_a, rssi_b);
max_rssi = max_t(u32, max_rssi, rssi_c);
/*
* dBm = rssi dB - agc dB - constant.
* Higher AGC (higher radio gain) means lower signal.
*/
rssi_a_dbm = rssi_a - IWL_RSSI_OFFSET - agc_a;
rssi_b_dbm = rssi_b - IWL_RSSI_OFFSET - agc_b;
max_rssi_dbm = max_t(int, rssi_a_dbm, rssi_b_dbm);
IWL_DEBUG_STATS(mvm, "Rssi In A %d B %d C %d Max %d AGC dB %d\n",
rssi_a, rssi_b, rssi_c, max_rssi, agc_db);
IWL_DEBUG_STATS(mvm, "Rssi In A %d B %d Max %d AGCA %d AGCB %d\n",
rssi_a_dbm, rssi_b_dbm, max_rssi_dbm, agc_a, agc_b);
/* dBm = max_rssi dB - agc dB - constant.
* Higher AGC (higher radio gain) means lower signal. */
return max_rssi - agc_db - IWL_RSSI_OFFSET;
return max_rssi_dbm;
}
/*
......
......@@ -770,6 +770,16 @@ int iwl_mvm_sta_tx_agg_stop(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
u16 txq_id;
int err;
/*
* If mac80211 is cleaning its state, then say that we finished since
* our state has been cleared anyway.
*/
if (test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) {
ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
return 0;
}
spin_lock_bh(&mvmsta->lock);
txq_id = tid_data->txq_id;
......
......@@ -607,12 +607,8 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm,
/* Single frame failure in an AMPDU queue => send BAR */
if (txq_id >= IWL_FIRST_AMPDU_QUEUE &&
!(info->flags & IEEE80211_TX_STAT_ACK)) {
/* there must be only one skb in the skb_list */
WARN_ON_ONCE(skb_freed > 1 ||
!skb_queue_empty(&skbs));
!(info->flags & IEEE80211_TX_STAT_ACK))
info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
}
/* W/A FW bug: seq_ctl is wrong when the queue is flushed */
if (status == TX_STATUS_FAIL_FIFO_FLUSHED) {
......
......@@ -137,10 +137,6 @@ static inline int iwl_queue_dec_wrap(int index, int n_bd)
struct iwl_cmd_meta {
/* only for SYNC commands, iff the reply skb is wanted */
struct iwl_host_cmd *source;
DEFINE_DMA_UNMAP_ADDR(mapping);
DEFINE_DMA_UNMAP_LEN(len);
u32 flags;
};
......@@ -185,25 +181,36 @@ struct iwl_queue {
/*
* The FH will write back to the first TB only, so we need
* to copy some data into the buffer regardless of whether
* it should be mapped or not. This indicates how much to
* copy, even for HCMDs it must be big enough to fit the
* DRAM scratch from the TX cmd, at least 16 bytes.
* it should be mapped or not. This indicates how big the
* first TB must be to include the scratch buffer. Since
* the scratch is 4 bytes at offset 12, it's 16 now. If we
* make it bigger then allocations will be bigger and copy
* slower, so that's probably not useful.
*/
#define IWL_HCMD_MIN_COPY_SIZE 16
#define IWL_HCMD_SCRATCHBUF_SIZE 16
struct iwl_pcie_txq_entry {
struct iwl_device_cmd *cmd;
struct iwl_device_cmd *copy_cmd;
struct sk_buff *skb;
/* buffer to free after command completes */
const void *free_buf;
struct iwl_cmd_meta meta;
};
struct iwl_pcie_txq_scratch_buf {
struct iwl_cmd_header hdr;
u8 buf[8];
__le32 scratch;
};
/**
* struct iwl_txq - Tx Queue for DMA
* @q: generic Rx/Tx queue descriptor
* @tfds: transmit frame descriptors (DMA memory)
* @scratchbufs: start of command headers, including scratch buffers, for
* the writeback -- this is DMA memory and an array holding one buffer
* for each command on the queue
* @scratchbufs_dma: DMA address for the scratchbufs start
* @entries: transmit entries (driver state)
* @lock: queue lock
* @stuck_timer: timer that fires if queue gets stuck
......@@ -217,6 +224,8 @@ struct iwl_pcie_txq_entry {
struct iwl_txq {
struct iwl_queue q;
struct iwl_tfd *tfds;
struct iwl_pcie_txq_scratch_buf *scratchbufs;
dma_addr_t scratchbufs_dma;
struct iwl_pcie_txq_entry *entries;
spinlock_t lock;
struct timer_list stuck_timer;
......@@ -225,6 +234,13 @@ struct iwl_txq {
u8 active;
};
static inline dma_addr_t
iwl_pcie_get_scratchbuf_dma(struct iwl_txq *txq, int idx)
{
return txq->scratchbufs_dma +
sizeof(struct iwl_pcie_txq_scratch_buf) * idx;
}
/**
* struct iwl_trans_pcie - PCIe transport specific data
* @rxq: all the RX queue data
......
......@@ -637,22 +637,14 @@ static void iwl_pcie_rx_handle_rb(struct iwl_trans *trans,
index = SEQ_TO_INDEX(sequence);
cmd_index = get_cmd_index(&txq->q, index);
if (reclaim) {
struct iwl_pcie_txq_entry *ent;
ent = &txq->entries[cmd_index];
cmd = ent->copy_cmd;
WARN_ON_ONCE(!cmd && ent->meta.flags & CMD_WANT_HCMD);
} else {
if (reclaim)
cmd = txq->entries[cmd_index].cmd;
else
cmd = NULL;
}
err = iwl_op_mode_rx(trans->op_mode, &rxcb, cmd);
if (reclaim) {
/* The original command isn't needed any more */
kfree(txq->entries[cmd_index].copy_cmd);
txq->entries[cmd_index].copy_cmd = NULL;
/* nor is the duplicated part of the command */
kfree(txq->entries[cmd_index].free_buf);
txq->entries[cmd_index].free_buf = NULL;
}
......
This diff is collapsed.
......@@ -3290,14 +3290,19 @@ static int ieee80211_cfg_get_channel(struct wiphy *wiphy,
int ret = -ENODATA;
rcu_read_lock();
if (local->use_chanctx) {
chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
if (chanctx_conf) {
*chandef = chanctx_conf->def;
ret = 0;
}
} else if (local->open_count == local->monitors) {
*chandef = local->monitor_chandef;
chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
if (chanctx_conf) {
*chandef = chanctx_conf->def;
ret = 0;
} else if (local->open_count > 0 &&
local->open_count == local->monitors &&
sdata->vif.type == NL80211_IFTYPE_MONITOR) {
if (local->use_chanctx)
*chandef = local->monitor_chandef;
else
cfg80211_chandef_create(chandef,
local->_oper_channel,
local->_oper_channel_type);
ret = 0;
}
rcu_read_unlock();
......
......@@ -541,6 +541,9 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up)
ieee80211_adjust_monitor_flags(sdata, 1);
ieee80211_configure_filter(local);
mutex_lock(&local->mtx);
ieee80211_recalc_idle(local);
mutex_unlock(&local->mtx);
netif_carrier_on(dev);
break;
......@@ -812,6 +815,9 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
ieee80211_adjust_monitor_flags(sdata, -1);
ieee80211_configure_filter(local);
mutex_lock(&local->mtx);
ieee80211_recalc_idle(local);
mutex_unlock(&local->mtx);
break;
case NL80211_IFTYPE_P2P_DEVICE:
/* relies on synchronize_rcu() below */
......
......@@ -647,6 +647,9 @@ static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
our_mcs = (le16_to_cpu(vht_cap.vht_mcs.rx_mcs_map) &
mask) >> shift;
if (our_mcs == IEEE80211_VHT_MCS_NOT_SUPPORTED)
continue;
switch (ap_mcs) {
default:
if (our_mcs <= ap_mcs)
......@@ -3502,6 +3505,14 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
/*
* Stop timers before deleting work items, as timers
* could race and re-add the work-items. They will be
* re-established on connection.
*/
del_timer_sync(&ifmgd->conn_mon_timer);
del_timer_sync(&ifmgd->bcn_mon_timer);
/*
* we need to use atomic bitops for the running bits
* only because both timers might fire at the same
......@@ -3516,13 +3527,9 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata)
if (del_timer_sync(&ifmgd->timer))
set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
cancel_work_sync(&ifmgd->chswitch_work);
if (del_timer_sync(&ifmgd->chswitch_timer))
set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
/* these will just be re-established on connection */
del_timer_sync(&ifmgd->conn_mon_timer);
del_timer_sync(&ifmgd->bcn_mon_timer);
cancel_work_sync(&ifmgd->chswitch_work);
}
void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
......@@ -4315,6 +4322,17 @@ void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
/*
* Make sure some work items will not run after this,
* they will not do anything but might not have been
* cancelled when disconnecting.
*/
cancel_work_sync(&ifmgd->monitor_work);
cancel_work_sync(&ifmgd->beacon_connection_loss_work);
cancel_work_sync(&ifmgd->request_smps_work);
cancel_work_sync(&ifmgd->csa_connection_drop_work);
cancel_work_sync(&ifmgd->chswitch_work);
mutex_lock(&ifmgd->mtx);
if (ifmgd->assoc_data)
ieee80211_destroy_assoc_data(sdata, false);
......
......@@ -2745,7 +2745,8 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw,
cpu_to_le16(IEEE80211_FCTL_MOREDATA);
}
sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev);
if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev);
if (!ieee80211_tx_prepare(sdata, &tx, skb))
break;
dev_kfree_skb_any(skb);
......
......@@ -367,8 +367,7 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv)
rdev->wiphy.rts_threshold = (u32) -1;
rdev->wiphy.coverage_class = 0;
rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH |
NL80211_FEATURE_ADVERTISE_CHAN_LIMITS;
rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH;
return &rdev->wiphy;
}
......
......@@ -557,18 +557,6 @@ static int nl80211_msg_put_channel(struct sk_buff *msg,
if ((chan->flags & IEEE80211_CHAN_RADAR) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_RADAR))
goto nla_put_failure;
if ((chan->flags & IEEE80211_CHAN_NO_HT40MINUS) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_MINUS))
goto nla_put_failure;
if ((chan->flags & IEEE80211_CHAN_NO_HT40PLUS) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_PLUS))
goto nla_put_failure;
if ((chan->flags & IEEE80211_CHAN_NO_80MHZ) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_80MHZ))
goto nla_put_failure;
if ((chan->flags & IEEE80211_CHAN_NO_160MHZ) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_160MHZ))
goto nla_put_failure;
if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
DBM_TO_MBM(chan->max_power)))
......@@ -1310,15 +1298,6 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag
dev->wiphy.max_acl_mac_addrs))
goto nla_put_failure;
if (dev->wiphy.extended_capabilities &&
(nla_put(msg, NL80211_ATTR_EXT_CAPA,
dev->wiphy.extended_capabilities_len,
dev->wiphy.extended_capabilities) ||
nla_put(msg, NL80211_ATTR_EXT_CAPA_MASK,
dev->wiphy.extended_capabilities_len,
dev->wiphy.extended_capabilities_mask)))
goto nla_put_failure;
return genlmsg_end(msg, hdr);
nla_put_failure:
......@@ -1328,7 +1307,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag
static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb)
{
int idx = 0;
int idx = 0, ret;
int start = cb->args[0];
struct cfg80211_registered_device *dev;
......@@ -1338,9 +1317,29 @@ static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb)
continue;
if (++idx <= start)
continue;
if (nl80211_send_wiphy(skb, NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
dev) < 0) {
ret = nl80211_send_wiphy(skb, NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
dev);
if (ret < 0) {
/*
* If sending the wiphy data didn't fit (ENOBUFS or
* EMSGSIZE returned), this SKB is still empty (so
* it's not too big because another wiphy dataset is
* already in the skb) and we've not tried to adjust
* the dump allocation yet ... then adjust the alloc
* size to be bigger, and return 1 but with the empty
* skb. This results in an empty message being RX'ed
* in userspace, but that is ignored.
*
* We can then retry with the larger buffer.
*/
if ((ret == -ENOBUFS || ret == -EMSGSIZE) &&
!skb->len &&
cb->min_dump_alloc < 4096) {
cb->min_dump_alloc = 4096;
mutex_unlock(&cfg80211_mutex);
return 1;
}
idx--;
break;
}
......@@ -1357,7 +1356,7 @@ static int nl80211_get_wiphy(struct sk_buff *skb, struct genl_info *info)
struct sk_buff *msg;
struct cfg80211_registered_device *dev = info->user_ptr[0];
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
msg = nlmsg_new(4096, GFP_KERNEL);
if (!msg)
return -ENOMEM;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment