Commit 32d0e4a3 authored by Andy Shevchenko's avatar Andy Shevchenko Committed by Darren Hart

intel_scu_ipc: Read resources from PCI configuration

Read the resources from PCI BAR0 instead of using hardcoded values.
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: default avatarDarren Hart <dvhart@linux.intel.com>
parent f0295a36
......@@ -43,10 +43,9 @@
/*
* IPC register summary
*
* IPC register blocks are memory mapped at fixed address of 0xFF11C000
* IPC register blocks are memory mapped at fixed address of PCI BAR 0.
* To read or write information to the SCU, driver writes to IPC-1 memory
* mapped registers (base address 0xFF11C000). The following is the IPC
* mechanism
* mapped registers. The following is the IPC mechanism
*
* 1. IA core cDMI interface claims this transaction and converts it to a
* Transaction Layer Packet (TLP) message which is sent across the cDMI.
......@@ -69,34 +68,26 @@
/* intel scu ipc driver data */
struct intel_scu_ipc_pdata_t {
u32 ipc_base;
u32 i2c_base;
u32 ipc_len;
u32 i2c_len;
u8 irq_mode;
};
static struct intel_scu_ipc_pdata_t intel_scu_ipc_lincroft_pdata = {
.ipc_base = 0xff11c000,
.i2c_base = 0xff12b000,
.ipc_len = 0x100,
.i2c_len = 0x10,
.irq_mode = 0,
};
/* Penwell and Cloverview */
static struct intel_scu_ipc_pdata_t intel_scu_ipc_penwell_pdata = {
.ipc_base = 0xff11c000,
.i2c_base = 0xff12b000,
.ipc_len = 0x100,
.i2c_len = 0x10,
.irq_mode = 1,
};
static struct intel_scu_ipc_pdata_t intel_scu_ipc_tangier_pdata = {
.ipc_base = 0xff009000,
.i2c_base = 0xff00d000,
.ipc_len = 0x100,
.i2c_len = 0x10,
.irq_mode = 0,
};
......@@ -572,7 +563,7 @@ static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
int err;
struct intel_scu_ipc_pdata_t *pdata;
resource_size_t pci_resource;
resource_size_t base;
if (ipcdev.pdev) /* We support only one SCU */
return -EBUSY;
......@@ -590,8 +581,8 @@ static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id)
if (err)
return err;
pci_resource = pci_resource_start(dev, 0);
if (!pci_resource)
base = pci_resource_start(dev, 0);
if (!base)
return -ENOMEM;
init_completion(&ipcdev.cmd_complete);
......@@ -599,7 +590,7 @@ static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id)
if (request_irq(dev->irq, ioc, 0, "intel_scu_ipc", &ipcdev))
return -EBUSY;
ipcdev.ipc_base = ioremap_nocache(pdata->ipc_base, pdata->ipc_len);
ipcdev.ipc_base = ioremap_nocache(base, pci_resource_len(dev, 0));
if (!ipcdev.ipc_base)
return -ENOMEM;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment