Commit 32e14592 authored by Benjamin Gaignard's avatar Benjamin Gaignard

drm: sti: fix clocking issues in crtc

fix and simplify clock management in crtc to avoid unbalanced
call to clk_prepare_enable and clk_disable_unprepare functions
remove unused functions
Signed-off-by: default avatarBenjamin Gaignard <benjamin.gaignard@linaro.org>
parent 2c83f581
......@@ -23,22 +23,11 @@
static void sti_crtc_enable(struct drm_crtc *crtc)
{
struct sti_mixer *mixer = to_sti_mixer(crtc);
struct device *dev = mixer->dev;
struct sti_compositor *compo = dev_get_drvdata(dev);
DRM_DEBUG_DRIVER("\n");
mixer->status = STI_MIXER_READY;
/* Prepare and enable the compo IP clock */
if (mixer->id == STI_MIXER_MAIN) {
if (clk_prepare_enable(compo->clk_compo_main))
DRM_INFO("Failed to prepare/enable compo_main clk\n");
} else {
if (clk_prepare_enable(compo->clk_compo_aux))
DRM_INFO("Failed to prepare/enable compo_aux clk\n");
}
drm_crtc_vblank_on(crtc);
}
......@@ -57,9 +46,8 @@ sti_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode)
struct sti_mixer *mixer = to_sti_mixer(crtc);
struct device *dev = mixer->dev;
struct sti_compositor *compo = dev_get_drvdata(dev);
struct clk *clk;
struct clk *compo_clk, *pix_clk;
int rate = mode->clock * 1000;
int res;
DRM_DEBUG_KMS("CRTC:%d (%s) mode:%d (%s)\n",
crtc->base.id, sti_mixer_to_str(mixer),
......@@ -74,32 +62,46 @@ sti_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode)
mode->vsync_start, mode->vsync_end,
mode->vtotal, mode->type, mode->flags);
/* Set rate and prepare/enable pixel clock */
if (mixer->id == STI_MIXER_MAIN)
clk = compo->clk_pix_main;
else
clk = compo->clk_pix_aux;
if (mixer->id == STI_MIXER_MAIN) {
compo_clk = compo->clk_compo_main;
pix_clk = compo->clk_pix_main;
} else {
compo_clk = compo->clk_compo_aux;
pix_clk = compo->clk_pix_aux;
}
/* Prepare and enable the compo IP clock */
if (clk_prepare_enable(compo_clk)) {
DRM_INFO("Failed to prepare/enable compositor clk\n");
goto compo_error;
}
res = clk_set_rate(clk, rate);
if (res < 0) {
/* Set rate and prepare/enable pixel clock */
if (clk_set_rate(pix_clk, rate) < 0) {
DRM_ERROR("Cannot set rate (%dHz) for pix clk\n", rate);
return -EINVAL;
goto pix_error;
}
if (clk_prepare_enable(clk)) {
if (clk_prepare_enable(pix_clk)) {
DRM_ERROR("Failed to prepare/enable pix clk\n");
return -EINVAL;
goto pix_error;
}
sti_vtg_set_config(mixer->id == STI_MIXER_MAIN ?
compo->vtg_main : compo->vtg_aux, &crtc->mode);
res = sti_mixer_active_video_area(mixer, &crtc->mode);
if (res) {
if (sti_mixer_active_video_area(mixer, &crtc->mode)) {
DRM_ERROR("Can't set active video area\n");
return -EINVAL;
goto mixer_error;
}
return res;
return 0;
mixer_error:
clk_disable_unprepare(pix_clk);
pix_error:
clk_disable_unprepare(compo_clk);
compo_error:
return -EINVAL;
}
static void sti_crtc_disable(struct drm_crtc *crtc)
......@@ -130,7 +132,6 @@ static void sti_crtc_disable(struct drm_crtc *crtc)
static void
sti_crtc_mode_set_nofb(struct drm_crtc *crtc)
{
sti_crtc_enable(crtc);
sti_crtc_mode_set(crtc, &crtc->state->adjusted_mode);
}
......@@ -221,9 +222,7 @@ static void sti_crtc_atomic_flush(struct drm_crtc *crtc,
static const struct drm_crtc_helper_funcs sti_crtc_helper_funcs = {
.enable = sti_crtc_enable,
.disable = sti_crtc_disabling,
.mode_set = drm_helper_crtc_mode_set,
.mode_set_nofb = sti_crtc_mode_set_nofb,
.mode_set_base = drm_helper_crtc_mode_set_base,
.atomic_begin = sti_crtc_atomic_begin,
.atomic_flush = sti_crtc_atomic_flush,
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment