Merge branch 'bonding_netlink_lacp'

Jonathan Toppins says:

====================
add netlink support for new lacp bonding parameters

This is a resubmit of Mahesh's last 3 bonding patches from this series
(http://marc.info/?l=linux-netdev&m=142432864626179&w=2) with one
additional kernel patch which adds the netlink bits. I have noted any
modifications I did to the original patches just above my signoff line.
Patch 5 is the iproute2 support for these bonding options. All patches
were coded against the net-next branch of their respective projects.

v2:
  * rebased
  * only send these new parameters via netlink when bond is in mode 4
  * fixed ad_actor_sys_prio to be 0xFFFF by default even when the bond
    is initially created in mode 0 and switched to mode 4

v3:
  * reverted changes to bond_option_ad_actor_system_set() from v1 in Mahesh's
    patch "bonding: Allow userspace to set actors' macaddr in an AD-system."
    Instead implementing all setting in the option specific set function as
    Nik suggested.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/networking/bonding.txt

@@ -51,6 +51,7 @@ Table of Contents
 3.4	Configuring Bonding Manually via Sysfs
 3.5	Configuration with Interfaces Support
 3.6	Overriding Configuration for Special Cases
+3.7 Configuring LACP for 802.3ad mode in a more secure way
 
 4. Querying Bonding Configuration
 4.1	Bonding Configuration
@@ -178,6 +179,27 @@ active_slave
 	active slave, or the empty string if there is no active slave or
 	the current mode does not use an active slave.
 
+ad_actor_sys_prio
+
+	In an AD system, this specifies the system priority. The allowed range
+	is 1 - 65535. If the value is not specified, it takes 65535 as the
+	default value.
+
+	This parameter has effect only in 802.3ad mode and is available through
+	SysFs interface.
+
+ad_actor_system
+
+	In an AD system, this specifies the mac-address for the actor in
+	protocol packet exchanges (LACPDUs). The value cannot be NULL or
+	multicast. It is preferred to have the local-admin bit set for this
+	mac but driver does not enforce it. If the value is not given then
+	system defaults to using the masters' mac address as actors' system
+	address.
+
+	This parameter has effect only in 802.3ad mode and is available through
+	SysFs interface.
+
 ad_select
 
 	Specifies the 802.3ad aggregation selection logic to use.  The
@@ -220,6 +242,21 @@ ad_select
 
 	This option was added in bonding version 3.4.0.
 
+ad_user_port_key
+
+	In an AD system, the port-key has three parts as shown below -
+
+	   Bits   Use
+	   00     Duplex
+	   01-05  Speed
+	   06-15  User-defined
+
+	This defines the upper 10 bits of the port key. The values can be
+	from 0 - 1023. If not given, the system defaults to 0.
+
+	This parameter has effect only in 802.3ad mode and is available through
+	SysFs interface.
+
 all_slaves_active
 
 	Specifies that duplicate frames (received on inactive ports) should be
@@ -1622,6 +1659,53 @@ output port selection.
 This feature first appeared in bonding driver version 3.7.0 and support for
 output slave selection was limited to round-robin and active-backup modes.
 
+3.7 Configuring LACP for 802.3ad mode in a more secure way
+----------------------------------------------------------
+
+When using 802.3ad bonding mode, the Actor (host) and Partner (switch)
+exchange LACPDUs.  These LACPDUs cannot be sniffed, because they are
+destined to link local mac addresses (which switches/bridges are not
+supposed to forward).  However, most of the values are easily predictable
+or are simply the machine's MAC address (which is trivially known to all
+other hosts in the same L2).  This implies that other machines in the L2
+domain can spoof LACPDU packets from other hosts to the switch and potentially
+cause mayhem by joining (from the point of view of the switch) another
+machine's aggregate, thus receiving a portion of that hosts incoming
+traffic and / or spoofing traffic from that machine themselves (potentially
+even successfully terminating some portion of flows). Though this is not
+a likely scenario, one could avoid this possibility by simply configuring
+few bonding parameters:
+
+   (a) ad_actor_system : You can set a random mac-address that can be used for
+       these LACPDU exchanges. The value can not be either NULL or Multicast.
+       Also it's preferable to set the local-admin bit. Following shell code
+       generates a random mac-address as described above.
+
+       # sys_mac_addr=$(printf '%02x:%02x:%02x:%02x:%02x:%02x' \
+                                $(( (RANDOM & 0xFE) | 0x02 )) \
+                                $(( RANDOM & 0xFF )) \
+                                $(( RANDOM & 0xFF )) \
+                                $(( RANDOM & 0xFF )) \
+                                $(( RANDOM & 0xFF )) \
+                                $(( RANDOM & 0xFF )))
+       # echo $sys_mac_addr > /sys/class/net/bond0/bonding/ad_actor_system
+
+   (b) ad_actor_sys_prio : Randomize the system priority. The default value
+       is 65535, but system can take the value from 1 - 65535. Following shell
+       code generates random priority and sets it.
+
+       # sys_prio=$(( 1 + RANDOM + RANDOM ))
+       # echo $sys_prio > /sys/class/net/bond0/bonding/ad_actor_sys_prio
+
+   (c) ad_user_port_key : Use the user portion of the port-key. The default
+       keeps this empty. These are the upper 10 bits of the port-key and value
+       ranges from 0 - 1023. Following shell code generates these 10 bits and
+       sets it.
+
+       # usr_port_key=$(( RANDOM & 0x3FF ))
+       # echo $usr_port_key > /sys/class/net/bond0/bonding/ad_user_port_key
+
+
 4 Querying Bonding Configuration
 =================================
 

drivers/net/bonding/bond_3ad.c

@@ -75,10 +75,10 @@
 /* Port Key definitions
  * key is determined according to the link speed, duplex and
  * user key (which is yet not supported)
- * --------------------------------------------------------------
- * Port key :	| User key	| Speed		| Duplex	|
- * --------------------------------------------------------------
- * 16		  6		  1		  0
+ *           --------------------------------------------------------------
+ * Port key  | User key (10 bits)           | Speed (5 bits)      | Duplex|
+ *           --------------------------------------------------------------
+ *           |15                           6|5                   1|0
  */
 #define  AD_DUPLEX_KEY_MASKS    0x1
 #define  AD_SPEED_KEY_MASKS     0x3E
@@ -1908,8 +1908,14 @@ void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution)
 
 		BOND_AD_INFO(bond).aggregator_identifier = 0;
 
-		BOND_AD_INFO(bond).system.sys_priority = 0xFFFF;
-		BOND_AD_INFO(bond).system.sys_mac_addr = *((struct mac_addr *)bond->dev->dev_addr);
+		BOND_AD_INFO(bond).system.sys_priority =
+			bond->params.ad_actor_sys_prio;
+		if (is_zero_ether_addr(bond->params.ad_actor_system))
+			BOND_AD_INFO(bond).system.sys_mac_addr =
+			    *((struct mac_addr *)bond->dev->dev_addr);
+		else
+			BOND_AD_INFO(bond).system.sys_mac_addr =
+			    *((struct mac_addr *)bond->params.ad_actor_system);
 
 		/* initialize how many times this module is called in one
 		 * second (should be about every 100ms)
@@ -1945,10 +1951,10 @@ void bond_3ad_bind_slave(struct slave *slave)
 
 		port->slave = slave;
 		port->actor_port_number = SLAVE_AD_INFO(slave)->id;
-		/* key is determined according to the link speed, duplex and user key(which
-		 * is yet not supported)
+		/* key is determined according to the link speed, duplex and
+		 * user key
 		 */
-		port->actor_admin_port_key = 0;
+		port->actor_admin_port_key = bond->params.ad_user_port_key << 6;
 		port->actor_admin_port_key |= __get_duplex(port);
 		port->actor_admin_port_key |= (__get_link_speed(port) << 1);
 		port->actor_oper_port_key = port->actor_admin_port_key;
@@ -1959,6 +1965,8 @@ void bond_3ad_bind_slave(struct slave *slave)
 			port->sm_vars &= ~AD_PORT_LACP_ENABLED;
 		/* actor system is the bond's system */
 		port->actor_system = BOND_AD_INFO(bond).system.sys_mac_addr;
+		port->actor_system_priority =
+		    BOND_AD_INFO(bond).system.sys_priority;
 		/* tx timer(to verify that no more than MAX_TX_IN_SECOND
 		 * lacpdu's are sent in one second)
 		 */

drivers/net/bonding/bond_main.c

@@ -4140,6 +4140,8 @@ static int bond_check_params(struct bond_params *params)
 	struct bond_opt_value newval;
 	const struct bond_opt_value *valptr;
 	int arp_all_targets_value;
+	u16 ad_actor_sys_prio = 0;
+	u16 ad_user_port_key = 0;
 
 	/* Convert string parameters. */
 	if (mode) {
@@ -4434,6 +4436,24 @@ static int bond_check_params(struct bond_params *params)
 		fail_over_mac_value = BOND_FOM_NONE;
 	}
 
+	bond_opt_initstr(&newval, "default");
+	valptr = bond_opt_parse(
+			bond_opt_get(BOND_OPT_AD_ACTOR_SYS_PRIO),
+				     &newval);
+	if (!valptr) {
+		pr_err("Error: No ad_actor_sys_prio default value");
+		return -EINVAL;
+	}
+	ad_actor_sys_prio = valptr->value;
+
+	valptr = bond_opt_parse(bond_opt_get(BOND_OPT_AD_USER_PORT_KEY),
+				&newval);
+	if (!valptr) {
+		pr_err("Error: No ad_user_port_key default value");
+		return -EINVAL;
+	}
+	ad_user_port_key = valptr->value;
+
 	if (lp_interval == 0) {
 		pr_warn("Warning: ip_interval must be between 1 and %d, so it was reset to %d\n",
 			INT_MAX, BOND_ALB_DEFAULT_LP_INTERVAL);
@@ -4462,6 +4482,9 @@ static int bond_check_params(struct bond_params *params)
 	params->lp_interval = lp_interval;
 	params->packets_per_slave = packets_per_slave;
 	params->tlb_dynamic_lb = 1; /* Default value */
+	params->ad_actor_sys_prio = ad_actor_sys_prio;
+	eth_zero_addr(params->ad_actor_system);
+	params->ad_user_port_key = ad_user_port_key;
 	if (packets_per_slave > 0) {
 		params->reciprocal_packets_per_slave =
 			reciprocal_value(packets_per_slave);

drivers/net/bonding/bond_netlink.c

@@ -94,6 +94,10 @@ static const struct nla_policy bond_policy[IFLA_BOND_MAX + 1] = {
 	[IFLA_BOND_AD_LACP_RATE]	= { .type = NLA_U8 },
 	[IFLA_BOND_AD_SELECT]		= { .type = NLA_U8 },
 	[IFLA_BOND_AD_INFO]		= { .type = NLA_NESTED },
+	[IFLA_BOND_AD_ACTOR_SYS_PRIO]	= { .type = NLA_U16 },
+	[IFLA_BOND_AD_USER_PORT_KEY]	= { .type = NLA_U16 },
+	[IFLA_BOND_AD_ACTOR_SYSTEM]	= { .type = NLA_BINARY,
+					    .len  = ETH_ALEN },
 };
 
 static const struct nla_policy bond_slave_policy[IFLA_BOND_SLAVE_MAX + 1] = {
@@ -379,6 +383,36 @@ static int bond_changelink(struct net_device *bond_dev,
 		if (err)
 			return err;
 	}
+	if (data[IFLA_BOND_AD_ACTOR_SYS_PRIO]) {
+		int actor_sys_prio =
+			nla_get_u16(data[IFLA_BOND_AD_ACTOR_SYS_PRIO]);
+
+		bond_opt_initval(&newval, actor_sys_prio);
+		err = __bond_opt_set(bond, BOND_OPT_AD_ACTOR_SYS_PRIO, &newval);
+		if (err)
+			return err;
+	}
+
+	if (data[IFLA_BOND_AD_USER_PORT_KEY]) {
+		int port_key =
+			nla_get_u16(data[IFLA_BOND_AD_USER_PORT_KEY]);
+
+		bond_opt_initval(&newval, port_key);
+		err = __bond_opt_set(bond, BOND_OPT_AD_USER_PORT_KEY, &newval);
+		if (err)
+			return err;
+	}
+
+	if (data[IFLA_BOND_AD_ACTOR_SYSTEM]) {
+		if (nla_len(data[IFLA_BOND_AD_ACTOR_SYSTEM]) != ETH_ALEN)
+			return -EINVAL;
+
+		bond_opt_initval(&newval,
+				 nla_get_be64(data[IFLA_BOND_AD_ACTOR_SYSTEM]));
+		err = __bond_opt_set(bond, BOND_OPT_AD_ACTOR_SYSTEM, &newval);
+		if (err)
+			return err;
+	}
 	return 0;
 }
 
@@ -426,6 +460,9 @@ static size_t bond_get_size(const struct net_device *bond_dev)
 		nla_total_size(sizeof(u16)) + /* IFLA_BOND_AD_INFO_ACTOR_KEY */
 		nla_total_size(sizeof(u16)) + /* IFLA_BOND_AD_INFO_PARTNER_KEY*/
 		nla_total_size(ETH_ALEN) +    /* IFLA_BOND_AD_INFO_PARTNER_MAC*/
+		nla_total_size(sizeof(u16)) + /* IFLA_BOND_AD_ACTOR_SYS_PRIO */
+		nla_total_size(sizeof(u16)) + /* IFLA_BOND_AD_USER_PORT_KEY */
+		nla_total_size(ETH_ALEN) + /* IFLA_BOND_AD_ACTOR_SYSTEM */
 		0;
 }
 
@@ -551,6 +588,19 @@ static int bond_fill_info(struct sk_buff *skb,
 	if (BOND_MODE(bond) == BOND_MODE_8023AD) {
 		struct ad_info info;
 
+		if (nla_put_u16(skb, IFLA_BOND_AD_ACTOR_SYS_PRIO,
+				bond->params.ad_actor_sys_prio))
+			goto nla_put_failure;
+
+		if (nla_put_u16(skb, IFLA_BOND_AD_USER_PORT_KEY,
+				bond->params.ad_user_port_key))
+			goto nla_put_failure;
+
+		if (nla_put(skb, IFLA_BOND_AD_ACTOR_SYSTEM,
+			    sizeof(bond->params.ad_actor_system),
+			    &bond->params.ad_actor_system))
+			goto nla_put_failure;
+
 		if (!bond_3ad_get_active_agg_info(bond, &info)) {
 			struct nlattr *nest;
 

drivers/net/bonding/bond_options.c

@@ -70,6 +70,12 @@ static int bond_option_slaves_set(struct bonding *bond,
 				  const struct bond_opt_value *newval);
 static int bond_option_tlb_dynamic_lb_set(struct bonding *bond,
 				  const struct bond_opt_value *newval);
+static int bond_option_ad_actor_sys_prio_set(struct bonding *bond,
+					     const struct bond_opt_value *newval);
+static int bond_option_ad_actor_system_set(struct bonding *bond,
+					   const struct bond_opt_value *newval);
+static int bond_option_ad_user_port_key_set(struct bonding *bond,
+					    const struct bond_opt_value *newval);
 
 
 static const struct bond_opt_value bond_mode_tbl[] = {
@@ -186,6 +192,18 @@ static const struct bond_opt_value bond_tlb_dynamic_lb_tbl[] = {
 	{ NULL,  -1, 0}
 };
 
+static const struct bond_opt_value bond_ad_actor_sys_prio_tbl[] = {
+	{ "minval",  1,     BOND_VALFLAG_MIN},
+	{ "maxval",  65535, BOND_VALFLAG_MAX | BOND_VALFLAG_DEFAULT},
+	{ NULL,      -1,    0},
+};
+
+static const struct bond_opt_value bond_ad_user_port_key_tbl[] = {
+	{ "minval",  0,     BOND_VALFLAG_MIN | BOND_VALFLAG_DEFAULT},
+	{ "maxval",  1023,  BOND_VALFLAG_MAX},
+	{ NULL,      -1,    0},
+};
+
 static const struct bond_option bond_opts[BOND_OPT_LAST] = {
 	[BOND_OPT_MODE] = {
 		.id = BOND_OPT_MODE,
@@ -379,6 +397,29 @@ static const struct bond_option bond_opts[BOND_OPT_LAST] = {
 		.values = bond_tlb_dynamic_lb_tbl,
 		.flags = BOND_OPTFLAG_IFDOWN,
 		.set = bond_option_tlb_dynamic_lb_set,
+	},
+	[BOND_OPT_AD_ACTOR_SYS_PRIO] = {
+		.id = BOND_OPT_AD_ACTOR_SYS_PRIO,
+		.name = "ad_actor_sys_prio",
+		.unsuppmodes = BOND_MODE_ALL_EX(BIT(BOND_MODE_8023AD)),
+		.flags = BOND_OPTFLAG_IFDOWN,
+		.values = bond_ad_actor_sys_prio_tbl,
+		.set = bond_option_ad_actor_sys_prio_set,
+	},
+	[BOND_OPT_AD_ACTOR_SYSTEM] = {
+		.id = BOND_OPT_AD_ACTOR_SYSTEM,
+		.name = "ad_actor_system",
+		.unsuppmodes = BOND_MODE_ALL_EX(BIT(BOND_MODE_8023AD)),
+		.flags = BOND_OPTFLAG_RAWVAL | BOND_OPTFLAG_IFDOWN,
+		.set = bond_option_ad_actor_system_set,
+	},
+	[BOND_OPT_AD_USER_PORT_KEY] = {
+		.id = BOND_OPT_AD_USER_PORT_KEY,
+		.name = "ad_user_port_key",
+		.unsuppmodes = BOND_MODE_ALL_EX(BIT(BOND_MODE_8023AD)),
+		.flags = BOND_OPTFLAG_IFDOWN,
+		.values = bond_ad_user_port_key_tbl,
+		.set = bond_option_ad_user_port_key_set,
 	}
 };
 
@@ -1349,3 +1390,53 @@ static int bond_option_tlb_dynamic_lb_set(struct bonding *bond,
 
 	return 0;
 }
+
+static int bond_option_ad_actor_sys_prio_set(struct bonding *bond,
+					     const struct bond_opt_value *newval)
+{
+	netdev_info(bond->dev, "Setting ad_actor_sys_prio to %llu\n",
+		    newval->value);
+
+	bond->params.ad_actor_sys_prio = newval->value;
+	return 0;
+}
+
+static int bond_option_ad_actor_system_set(struct bonding *bond,
+					   const struct bond_opt_value *newval)
+{
+	u8 macaddr[ETH_ALEN];
+	u8 *mac;
+	int i;
+
+	if (newval->string) {
+		i = sscanf(newval->string, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
+			   &macaddr[0], &macaddr[1], &macaddr[2],
+			   &macaddr[3], &macaddr[4], &macaddr[5]);
+		if (i != ETH_ALEN)
+			goto err;
+		mac = macaddr;
+	} else {
+		mac = (u8 *)&newval->value;
+	}
+
+	if (!is_valid_ether_addr(mac))
+		goto err;
+
+	netdev_info(bond->dev, "Setting ad_actor_system to %pM\n", mac);
+	ether_addr_copy(bond->params.ad_actor_system, mac);
+	return 0;
+
+err:
+	netdev_err(bond->dev, "Invalid MAC address.\n");
+	return -EINVAL;
+}
+
+static int bond_option_ad_user_port_key_set(struct bonding *bond,
+					    const struct bond_opt_value *newval)
+{
+	netdev_info(bond->dev, "Setting ad_user_port_key to %llu\n",
+		    newval->value);
+
+	bond->params.ad_user_port_key = newval->value;
+	return 0;
+}

drivers/net/bonding/bond_procfs.c

@@ -135,6 +135,10 @@ static void bond_info_show_master(struct seq_file *seq)
 					  bond->params.ad_select);
 		seq_printf(seq, "Aggregator selection policy (ad_select): %s\n",
 			   optval->string);
+		seq_printf(seq, "System priority: %d\n",
+			   BOND_AD_INFO(bond).system.sys_priority);
+		seq_printf(seq, "System MAC address: %pM\n",
+			   &BOND_AD_INFO(bond).system.sys_mac_addr);
 
 		if (__bond_3ad_get_active_agg_info(bond, &ad_info)) {
 			seq_printf(seq, "bond %s has no active aggregator\n",
@@ -198,6 +202,8 @@ static void bond_info_show_slave(struct seq_file *seq,
 			seq_puts(seq, "details actor lacp pdu:\n");
 			seq_printf(seq, "    system priority: %d\n",
 				   port->actor_system_priority);
+			seq_printf(seq, "    system mac address: %pM\n",
+				   &port->actor_system);
 			seq_printf(seq, "    port key: %d\n",
 				   port->actor_oper_port_key);
 			seq_printf(seq, "    port priority: %d\n",
@@ -210,6 +216,8 @@ static void bond_info_show_slave(struct seq_file *seq,
 			seq_puts(seq, "details partner lacp pdu:\n");
 			seq_printf(seq, "    system priority: %d\n",
 				   port->partner_oper.system_priority);
+			seq_printf(seq, "    system mac address: %pM\n",
+				   &port->partner_oper.system);
 			seq_printf(seq, "    oper key: %d\n",
 				   port->partner_oper.key);
 			seq_printf(seq, "    port priority: %d\n",

drivers/net/bonding/bond_sysfs.c

@@ -692,6 +692,49 @@ static ssize_t bonding_show_packets_per_slave(struct device *d,
 static DEVICE_ATTR(packets_per_slave, S_IRUGO | S_IWUSR,
 		   bonding_show_packets_per_slave, bonding_sysfs_store_option);
 
+static ssize_t bonding_show_ad_actor_sys_prio(struct device *d,
+					      struct device_attribute *attr,
+					      char *buf)
+{
+	struct bonding *bond = to_bond(d);
+
+	if (BOND_MODE(bond) == BOND_MODE_8023AD)
+		return sprintf(buf, "%hu\n", bond->params.ad_actor_sys_prio);
+
+	return 0;
+}
+static DEVICE_ATTR(ad_actor_sys_prio, S_IRUGO | S_IWUSR,
+		   bonding_show_ad_actor_sys_prio, bonding_sysfs_store_option);
+
+static ssize_t bonding_show_ad_actor_system(struct device *d,
+					    struct device_attribute *attr,
+					    char *buf)
+{
+	struct bonding *bond = to_bond(d);
+
+	if (BOND_MODE(bond) == BOND_MODE_8023AD)
+		return sprintf(buf, "%pM\n", bond->params.ad_actor_system);
+
+	return 0;
+}
+
+static DEVICE_ATTR(ad_actor_system, S_IRUGO | S_IWUSR,
+		   bonding_show_ad_actor_system, bonding_sysfs_store_option);
+
+static ssize_t bonding_show_ad_user_port_key(struct device *d,
+					     struct device_attribute *attr,
+					     char *buf)
+{
+	struct bonding *bond = to_bond(d);
+
+	if (BOND_MODE(bond) == BOND_MODE_8023AD)
+		return sprintf(buf, "%hu\n", bond->params.ad_user_port_key);
+
+	return 0;
+}
+static DEVICE_ATTR(ad_user_port_key, S_IRUGO | S_IWUSR,
+		   bonding_show_ad_user_port_key, bonding_sysfs_store_option);
+
 static struct attribute *per_bond_attrs[] = {
 	&dev_attr_slaves.attr,
 	&dev_attr_mode.attr,
@@ -725,6 +768,9 @@ static struct attribute *per_bond_attrs[] = {
 	&dev_attr_lp_interval.attr,
 	&dev_attr_packets_per_slave.attr,
 	&dev_attr_tlb_dynamic_lb.attr,
+	&dev_attr_ad_actor_sys_prio.attr,
+	&dev_attr_ad_actor_system.attr,
+	&dev_attr_ad_user_port_key.attr,
 	NULL,
 };
 

include/net/bond_options.h

@@ -63,6 +63,9 @@ enum {
 	BOND_OPT_LP_INTERVAL,
 	BOND_OPT_SLAVES,
 	BOND_OPT_TLB_DYNAMIC_LB,
+	BOND_OPT_AD_ACTOR_SYS_PRIO,
+	BOND_OPT_AD_ACTOR_SYSTEM,
+	BOND_OPT_AD_USER_PORT_KEY,
 	BOND_OPT_LAST
 };
 

include/net/bonding.h

@@ -136,6 +136,9 @@ struct bond_params {
 	int packets_per_slave;
 	int tlb_dynamic_lb;
 	struct reciprocal_value reciprocal_packets_per_slave;
+	u16 ad_actor_sys_prio;
+	u16 ad_user_port_key;
+	u8 ad_actor_system[ETH_ALEN];
 };
 
 struct bond_parm_tbl {

include/uapi/linux/if_link.h

@@ -417,6 +417,9 @@ enum {
 	IFLA_BOND_AD_LACP_RATE,
 	IFLA_BOND_AD_SELECT,
 	IFLA_BOND_AD_INFO,
+	IFLA_BOND_AD_ACTOR_SYS_PRIO,
+	IFLA_BOND_AD_USER_PORT_KEY,
+	IFLA_BOND_AD_ACTOR_SYSTEM,
 	__IFLA_BOND_MAX,
 };