Merge tag 'imx-dt-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc

From Shawn Guo:

It contains the imx device tree updates for 3.12.

- New pinctrl entry additions for various peripherals
- Devices enabling for imx6, imx5 and imx27 boards
- Add missing device nodes like iim, owire, audmux and sram, etc.
- Various updates on boards like phytec, wandboard and sabresd
- Consolidate pad macros between imx6q and imx6dl

* tag 'imx-dt-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6: (92 commits)
  ARM: dts: vf610-twr: enable i2c0 device
  ARM: dts: i.MX51: Add one more I2C2 pinmux entry
  ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
  ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
  ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
  ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
  ARM: dts: i.MX27: Disable AUDMUX in the template
  ARM: dts: wandboard: Add support for SDIO bcm4329
  ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
  ARM: dts: imx53-qsb: Make USBH1 functional
  ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
  ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
  ARM: dts: imx6qdl-sabresd: Add touchscreen support
  ARM: imx: add ocram clock for imx53
  ARM: dts: imx: ocram size is different between imx6q and imx6dl
  ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
  ARM: dts: i.MX27: Remove clock name from CPU node
  ARM: dts: i.MX27: Increase "clock-latency" value
  ARM: dts: i.MX27: Add label to CPU node
  ARM: dts: i.MX27: Remove optional "ptp" clock source for FEC
  ...
Signed-off-by: Kevin Hilman <khilman@linaro.org>

Documentation/devicetree/bindings/clock/imx5-clock.txt

@@ -197,6 +197,7 @@ clocks and IDs.
 	spdif0_gate		183
 	spdif1_gate		184
 	spdif_ipg_gate		185
+	ocram			186
 
 Examples (for mx53):
 

arch/arm/boot/dts/Makefile

@@ -113,6 +113,8 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx27-pdk.dtb \
 	imx27-phytec-phycore-som.dtb \
 	imx27-phytec-phycore-rdk.dtb \
+	imx27-phytec-phycard-s-som.dtb \
+	imx27-phytec-phycard-s-rdk.dtb \
 	imx31-bug.dtb \
 	imx51-apf51.dtb \
 	imx51-apf51dev.dtb \
@@ -132,6 +134,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6q-sabrelite.dtb \
 	imx6q-sabresd.dtb \
 	imx6q-sbc6x.dtb \
+	imx6q-wandboard.dtb \
 	imx6sl-evk.dtb \
 	vf610-twr.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \

arch/arm/boot/dts/imx25.dtsi

@@ -13,19 +13,35 @@
 
 / {
 	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
 		serial3 = &uart4;
 		serial4 = &uart5;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
+		spi0 = &spi1;
+		spi1 = &spi2;
+		spi2 = &spi3;
 		usb0 = &usbotg;
 		usb1 = &usbhost1;
 	};
 
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
 	asic: asic-interrupt-controller@68000000 {
 		compatible = "fsl,imx25-asic", "fsl,avic";
 		interrupt-controller;
@@ -377,7 +393,8 @@ esdhc2: esdhc@53fb8000 {
 				status = "disabled";
 			};
 
-			lcdc@53fbc000 {
+			lcdc: lcdc@53fbc000 {
+				compatible = "fsl,imx25-fb", "fsl,imx21-fb";
 				reg = <0x53fbc000 0x4000>;
 				interrupts = <39>;
 				clocks = <&clks 103>, <&clks 66>, <&clks 49>;
@@ -424,6 +441,7 @@ sdma@53fd4000 {
 				reg = <0x53fd4000 0x4000>;
 				clocks = <&clks 112>, <&clks 68>;
 				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
 				interrupts = <34>;
 			};
 
@@ -444,6 +462,13 @@ pwm1: pwm@53fe0000 {
 				interrupts = <26>;
 			};
 
+			iim: iim@53ff0000 {
+				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <19>;
+				clocks = <&clks 99>;
+			};
+
 			usbphy1: usbphy@1 {
 				compatible = "nop-usbphy";
 				status = "disabled";

arch/arm/boot/dts/imx27-apf27dev.dts

@@ -53,6 +53,11 @@ &cspi2 {
 &i2c1 {
 	clock-frequency = <400000>;
 	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds1374";
+		reg = <0x68>;
+	};
 };
 
 &i2c2 {

arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts

+/*
+ * Copyright 2012 Markus Pargmann, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx27-phytec-phycard-s-som.dts"
+
+/ {
+	model = "Phytec pca100 rapid development kit";
+	compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
+
+	display: display {
+		model = "Primeview-PD050VL1";
+		native-mode = <&timing0>;
+		bits-per-pixel = <16>;  /* non-standard but required */
+		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
+		display-timings {
+			timing0: 640x480 {
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <112>;
+				hfront-porch = <36>;
+				hsync-len = <32>;
+				vback-porch = <33>;
+				vfront-porch = <33>;
+				vsync-len = <2>;
+				clock-frequency = <25000000>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3v3: 3v3 {
+			compatible = "regulator-fixed";
+			regulator-name = "3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&fb {
+	display = <&display>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	adc@64 {
+		compatible = "maxim,max1037";
+		vcc-supply = <&reg_3v3>;
+		reg = <0x64>;
+	};
+};
+
+&owire {
+	status = "okay";
+};
+
+&sdhci2 {
+	cd-gpios = <&gpio3 29 0>;
+	status = "okay";
+};
+
+&uart1 {
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	fsl,uart-has-rtscts;
+	status = "okay";
+};

arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts

+/*
+ * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
+ * and Markus Pargmann, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Phytec pca100";
+	compatible = "phytec,imx27-pca100", "fsl,imx27";
+
+	memory {
+		reg = <0xa0000000 0x08000000>; /* 128MB */
+	};
+};
+
+&cspi1 {
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio4 28 0>,
+		<&gpio4 27 0>;
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	at24@52 {
+		compatible = "at,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+};

arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts

@@ -35,3 +35,16 @@ &uart2 {
 	fsl,uart-has-rtscts;
 	status = "okay";
 };
+
+&weim {
+	can@d4000000 {
+		compatible = "nxp,sja1000";
+		reg = <4 0x00000000 0x00000100>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <19 0x2>;
+		nxp,external-clock-frequency = <16000000>;
+		nxp,tx-output-config = <0x16>;
+		nxp,no-comparator-bypass;
+		fsl,weim-cs-timing = <0x0000dcf6 0x444a0301 0x44443302>;
+	};
+};

arch/arm/boot/dts/imx27-phytec-phycore-som.dts

@@ -17,49 +17,22 @@ / {
 	compatible = "phytec,imx27-pcm038", "fsl,imx27";
 
 	memory {
-		reg = <0x0 0x0>;
+		reg = <0xa0000000 0x08000000>;
 	};
+};
 
-	soc {
-		aipi@10000000 { /* aipi1 */
-			serial@1000a000 {
-				status = "okay";
-			};
-
-			i2c@1001d000 {
-				clock-frequency = <400000>;
-				status = "okay";
-				at24@52 {
-					compatible = "at,24c32";
-					pagesize = <32>;
-					reg = <0x52>;
-				};
-				pcf8563@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-				lm75@4a {
-					compatible = "national,lm75";
-					reg = <0x4a>;
-				};
-			};
-		};
+&audmux {
+	status = "okay";
 
-		aipi@10020000 { /* aipi2 */
-			ethernet@1002b000 {
-				phy-reset-gpios = <&gpio3 30 0>;
-				status = "okay";
-			};
-		};
+	/* SSI0 <=> PINS_4 (MC13783 Audio) */
+	ssi0 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <0xcb205000>;
 	};
 
-	nor_flash@c0000000 {
-		compatible = "cfi-flash";
-		bank-width = <2>;
-		reg = <0xc0000000 0x02000000>;
-		linux,mtd-name = "physmap-flash.0";
-		#address-cells = <1>;
-		#size-cells = <1>;
+	pins4 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <0x00001000>;
 	};
 };
 
@@ -80,28 +53,16 @@ pmic: mc13783@0 {
 		fsl,mc13xxx-uses-rtc;
 
 		regulators {
-			sw1a_reg: sw1a {
+			/* SW1A and SW1B joined operation */
+			sw1_reg: sw1a {
 				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
+				regulator-max-microvolt = <1520000>;
 				regulator-always-on;
 				regulator-boot-on;
 			};
 
-			sw1b_reg: sw1b {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			sw2a_reg: sw2a {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			sw2b_reg: sw2b {
+			/* SW2A and SW2B joined operation */
+			sw2_reg: sw2a {
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
@@ -172,8 +133,62 @@ pwgt1spi_reg: pwgt1spi {
 	};
 };
 
+&fec {
+	phy-reset-gpios = <&gpio3 30 0>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	at24@52 {
+		compatible = "at,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	lm75@4a {
+		compatible = "national,lm75";
+		reg = <0x4a>;
+	};
+};
+
 &nfc {
 	nand-bus-width = <8>;
 	nand-ecc-mode = "hw";
 	status = "okay";
 };
+
+&uart1 {
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	nor: nor@c0000000 {
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x02000000>;
+		bank-width = <2>;
+		linux,mtd-name = "physmap-flash.0";
+		fsl,weim-cs-timing = <0x22c2cf00 0x75000d01 0x00000900>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	sram: sram@c8000000 {
+		compatible = "mtd-ram";
+		reg = <1 0x00000000 0x00800000>;
+		bank-width = <2>;
+		linux,mtd-name = "mtd-ram.0";
+		fsl,weim-cs-timing = <0x0000d843 0x22252521 0x22220a00>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};

arch/arm/boot/dts/imx27.dtsi

@@ -13,25 +13,27 @@
 
 / {
 	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
 		gpio3 = &gpio4;
 		gpio4 = &gpio5;
 		gpio5 = &gpio6;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
 		spi0 = &cspi1;
 		spi1 = &cspi2;
 		spi2 = &cspi3;
 	};
 
-	avic: avic-interrupt-controller@e0000000 {
-		compatible = "fsl,imx27-avic", "fsl,avic";
+	aitc: aitc-interrupt-controller@e0000000 {
+		compatible = "fsl,imx27-aitc", "fsl,avic";
 		interrupt-controller;
 		#interrupt-cells = <1>;
 		reg = <0x10040000 0x1000>;
@@ -47,11 +49,29 @@ osc26m {
 		};
 	};
 
+	cpus {
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		cpu: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+			operating-points = <
+				/* kHz uV */
+				266000 1300000
+				399000 1450000
+			>;
+			clock-latency = <62500>;
+			clocks = <&clks 18>;
+			voltage-tolerance = <5>;
+		};
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
-		interrupt-parent = <&avic>;
+		interrupt-parent = <&aitc>;
 		ranges;
 
 		aipi@10000000 { /* AIPI1 */
@@ -75,7 +95,7 @@ wdog: wdog@10002000 {
 				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
 				reg = <0x10002000 0x1000>;
 				interrupts = <27>;
-				clocks = <&clks 0>;
+				clocks = <&clks 74>;
 			};
 
 			gpt1: timer@10003000 {
@@ -102,7 +122,7 @@ gpt3: timer@10005000 {
 				clock-names = "ipg", "per";
 			};
 
-			pwm0: pwm@10006000 {
+			pwm: pwm@10006000 {
 				compatible = "fsl,imx27-pwm";
 				reg = <0x10006000 0x1000>;
 				interrupts = <23>;
@@ -110,6 +130,21 @@ pwm0: pwm@10006000 {
 				clock-names = "ipg", "per";
 			};
 
+			kpp: kpp@10008000 {
+				compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
+				reg = <0x10008000 0x1000>;
+				interrupts = <21>;
+				clocks = <&clks 37>;
+				status = "disabled";
+			};
+
+			owire: owire@10009000 {
+				compatible = "fsl,imx27-owire", "fsl,imx21-owire";
+				reg = <0x10009000 0x1000>;
+				clocks = <&clks 35>;
+				status = "disabled";
+			};
+
 			uart1: serial@1000a000 {
 				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 				reg = <0x1000a000 0x1000>;
@@ -260,6 +295,14 @@ gpio6: gpio@10015500 {
 				#interrupt-cells = <2>;
 			};
 
+			audmux: audmux@10016000 {
+				compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
+				reg = <0x10016000 0x1000>;
+				clocks = <&clks 0>;
+				clock-names = "audmux";
+				status = "disabled";
+			};
+
 			cspi3: cspi@10017000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -342,6 +385,15 @@ aipi@10020000 { /* AIPI2 */
 			reg = <0x10020000 0x20000>;
 			ranges;
 
+			fb: fb@10021000 {
+				compatible = "fsl,imx27-fb", "fsl,imx21-fb";
+				interrupts = <61>;
+				reg = <0x10021000 0x1000>;
+				clocks = <&clks 36>, <&clks 65>, <&clks 59>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
 			coda: coda@10023000 {
 				compatible = "fsl,imx27-vpu";
 				reg = <0x10023000 0x0200>;
@@ -351,27 +403,37 @@ coda: coda@10023000 {
 				iram = <&iram>;
 			};
 
+			sahara2: sahara@10025000 {
+				compatible = "fsl,imx27-sahara";
+				reg = <0x10025000 0x1000>;
+				interrupts = <59>;
+				clocks = <&clks 32>, <&clks 64>;
+				clock-names = "ipg", "ahb";
+			};
+
 			clks: ccm@10027000{
 				compatible = "fsl,imx27-ccm";
 				reg = <0x10027000 0x1000>;
 				#clock-cells = <1>;
 			};
 
+			iim: iim@10028000 {
+				compatible = "fsl,imx27-iim";
+				reg = <0x10028000 0x1000>;
+				interrupts = <62>;
+				clocks = <&clks 38>;
+			};
+
 			fec: ethernet@1002b000 {
 				compatible = "fsl,imx27-fec";
 				reg = <0x1002b000 0x4000>;
 				interrupts = <50>;
-				clocks = <&clks 48>, <&clks 67>, <&clks 0>;
-				clock-names = "ipg", "ahb", "ptp";
+				clocks = <&clks 48>, <&clks 67>;
+				clock-names = "ipg", "ahb";
 				status = "disabled";
 			};
 		};
 
-		iram: iram@ffff4c00 {
-			compatible = "mmio-sram";
-			reg = <0xffff4c00 0xb400>;
-		};
-
 		nfc: nand@d8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -381,5 +443,27 @@ nfc: nand@d8000000 {
 			clocks = <&clks 54>;
 			status = "disabled";
 		};
+
+		weim: weim@d8002000 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "fsl,imx27-weim";
+			reg = <0xd8002000 0x1000>;
+			clocks = <&clks 0>;
+			ranges = <
+				0 0 0xc0000000 0x08000000
+				1 0 0xc8000000 0x08000000
+				2 0 0xd0000000 0x02000000
+				3 0 0xd2000000 0x02000000
+				4 0 0xd4000000 0x02000000
+				5 0 0xd6000000 0x02000000
+			>;
+			status = "disabled";
+		};
+
+		iram: iram@ffff4c00 {
+			compatible = "mmio-sram";
+			reg = <0xffff4c00 0xb400>;
+		};
 	};
 };

arch/arm/boot/dts/imx31.dtsi

@@ -20,6 +20,16 @@ aliases {
 		serial4 = &uart5;
 	};
 
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm1136";
+			device_type = "cpu";
+		};
+	};
+
 	avic: avic-interrupt-controller@60000000 {
 		compatible = "fsl,imx31-avic", "fsl,avic";
 		interrupt-controller;
@@ -94,6 +104,13 @@ uart3: serial@5000c000 {
 				status = "disabled";
 			};
 
+			iim: iim@5001c000 {
+				compatible = "fsl,imx31-iim", "fsl,imx27-iim";
+				reg = <0x5001c000 0x1000>;
+				interrupts = <19>;
+				clocks = <&clks 25>;
+			};
+
 			clks: ccm@53f80000{
 				compatible = "fsl,imx31-ccm";
 				reg = <0x53f80000 0x4000>;

arch/arm/boot/dts/imx51-apf51.dts

@@ -26,10 +26,6 @@ memory {
 	};
 
 	clocks {
-		ckih1 {
-			clock-frequency = <0>;
-		};
-
 		osc {
 			clock-frequency = <33554432>;
 		};

arch/arm/boot/dts/imx51-babbage.dts

@@ -63,6 +63,10 @@ sound {
 	};
 
 	clocks {
+		ckih1 {
+			clock-frequency = <22579200>;
+		};
+
 		clk_26M: codec_clock {
 			compatible = "fixed-clock";
 			reg=<0>;
@@ -108,6 +112,7 @@ pmic: mc13892@0 {
 		#size-cells = <0>;
 		compatible = "fsl,mc13892";
 		spi-max-frequency = <6000000>;
+		spi-cs-high;
 		reg = <0>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <8 0x4>;

arch/arm/boot/dts/imx53-qsb.dts

@@ -93,6 +93,15 @@ reg_3p2v: 3p2v {
 			regulator-max-microvolt = <3200000>;
 			regulator-always-on;
 		};
+
+		reg_usb_vbus: usb_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio7 8 0>;
+			enable-active-high;
+		};
 	};
 
 	sound {
@@ -145,6 +154,7 @@ MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
 				MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
 				MX53_PAD_EIM_DA13__GPIO3_13       0x80000000
 				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
+				MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
 				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
 			>;
 		};
@@ -297,8 +307,14 @@ &fec {
 	status = "okay";
 };
 
+&vpu {
+	status = "okay";
+};
+
 &usbh1 {
-       status = "okay";
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
 };
 
 &usbotg {

arch/arm/boot/dts/imx53.dtsi

@@ -15,11 +15,6 @@
 
 / {
 	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
@@ -30,6 +25,24 @@ aliases {
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &cspi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+		};
 	};
 
 	tzic: tz-interrupt-controller@0fffc000 {
@@ -140,6 +153,9 @@ ssi2: ssi@50014000 {
 					reg = <0x50014000 0x4000>;
 					interrupts = <30>;
 					clocks = <&clks 49>;
+					dmas = <&sdma 24 1 0>,
+					       <&sdma 25 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
 					status = "disabled";
@@ -957,6 +973,13 @@ aips@60000000 {	/* AIPS2 */
 			reg = <0x60000000 0x10000000>;
 			ranges;
 
+			iim: iim@63f98000 {
+				compatible = "fsl,imx53-iim", "fsl,imx27-iim";
+				reg = <0x63f98000 0x4000>;
+				interrupts = <69>;
+				clocks = <&clks 107>;
+			};
+
 			uart5: serial@63f90000 {
 				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
 				reg = <0x63f90000 0x4000>;
@@ -990,6 +1013,7 @@ sdma: sdma@63fb0000 {
 				interrupts = <6>;
 				clocks = <&clks 56>, <&clks 56>;
 				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
 			};
 
@@ -1029,6 +1053,9 @@ ssi1: ssi@63fcc000 {
 				reg = <0x63fcc000 0x4000>;
 				interrupts = <29>;
 				clocks = <&clks 48>;
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
 				fsl,fifo-depth = <15>;
 				fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
 				status = "disabled";
@@ -1053,6 +1080,9 @@ ssi3: ssi@63fe8000 {
 				reg = <0x63fe8000 0x4000>;
 				interrupts = <96>;
 				clocks = <&clks 50>;
+				dmas = <&sdma 46 0 0>,
+				       <&sdma 47 0 0>;
+				dma-names = "rx", "tx";
 				fsl,fifo-depth = <15>;
 				fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */
 				status = "disabled";
@@ -1076,6 +1106,22 @@ tve: tve@63ff0000 {
 				crtcs = <&ipu 1>;
 				status = "disabled";
 			};
+
+			vpu: vpu@63ff4000 {
+				compatible = "fsl,imx53-vpu";
+				reg = <0x63ff4000 0x1000>;
+				interrupts = <9>;
+				clocks = <&clks 63>, <&clks 63>;
+				clock-names = "per", "ahb";
+				iram = <&ocram>;
+				status = "disabled";
+			};
+		};
+
+		ocram: sram@f8000000 {
+			compatible = "mmio-sram";
+			reg = <0xf8000000 0x20000>;
+			clocks = <&clks 186>;
 		};
 	};
 };

arch/arm/boot/dts/imx6dl-sabreauto.dts

@@ -15,25 +15,3 @@ / {
 	model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board";
 	compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
 };
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hog {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6DL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
-				MX6DL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
-			>;
-		};
-	};
-
-	ecspi1 {
-		pinctrl_ecspi1_sabreauto: ecspi1-sabreauto {
-			fsl,pins = <
-				MX6DL_PAD_EIM_D19__GPIO3_IO19  0x80000000
-			>;
-		};
-	};
-};

arch/arm/boot/dts/imx6dl-sabresd.dts

@@ -15,22 +15,3 @@ / {
 	model = "Freescale i.MX6 DualLite SABRE Smart Device Board";
 	compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
 };
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hog {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6DL_PAD_GPIO_4__GPIO1_IO04   0x80000000
-				MX6DL_PAD_GPIO_5__GPIO1_IO05   0x80000000
-				MX6DL_PAD_NANDF_D0__GPIO2_IO00 0x80000000
-				MX6DL_PAD_NANDF_D1__GPIO2_IO01 0x80000000
-				MX6DL_PAD_NANDF_D2__GPIO2_IO02 0x80000000
-				MX6DL_PAD_NANDF_D3__GPIO2_IO03 0x80000000
-				MX6DL_PAD_GPIO_0__CCM_CLKO1    0x130b0
-			>;
-		};
-	};
-};

arch/arm/boot/dts/imx6dl-wandboard.dts

@@ -10,6 +10,7 @@
  */
 /dts-v1/;
 #include "imx6dl.dtsi"
+#include "imx6qdl-wandboard.dtsi"
 
 / {
 	model = "Wandboard i.MX6 Dual Lite Board";
@@ -19,26 +20,3 @@ memory {
 		reg = <0x10000000 0x40000000>;
 	};
 };
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_1>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_1>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3_2>;
-	status = "okay";
-};

arch/arm/boot/dts/imx6dl.dtsi

@@ -8,8 +8,8 @@
  *
  */
 
-#include "imx6qdl.dtsi"
 #include "imx6dl-pinfunc.h"
+#include "imx6qdl.dtsi"
 
 / {
 	cpus {
@@ -32,238 +32,15 @@ cpu@1 {
 	};
 
 	soc {
+		ocram: sram@00900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			clocks = <&clks 142>;
+		};
+
 		aips1: aips-bus@02000000 {
 			iomuxc: iomuxc@020e0000 {
 				compatible = "fsl,imx6dl-iomuxc";
-				reg = <0x020e0000 0x4000>;
-
-				audmux {
-					pinctrl_audmux_2: audmux-2 {
-						fsl,pins = <
-							MX6DL_PAD_CSI0_DAT7__AUD3_RXD  0x80000000
-							MX6DL_PAD_CSI0_DAT4__AUD3_TXC  0x80000000
-							MX6DL_PAD_CSI0_DAT5__AUD3_TXD  0x80000000
-							MX6DL_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000
-						>;
-					};
-				};
-
-				ecspi1 {
-					pinctrl_ecspi1_1: ecspi1grp-1 {
-						fsl,pins = <
-							MX6DL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
-							MX6DL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
-							MX6DL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
-						>;
-					};
-				};
-
-				enet {
-					pinctrl_enet_1: enetgrp-1 {
-						fsl,pins = <
-							MX6DL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
-							MX6DL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-							MX6DL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-							MX6DL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-							MX6DL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-							MX6DL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-							MX6DL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-							MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-							MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-							MX6DL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-							MX6DL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-							MX6DL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-							MX6DL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-							MX6DL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-							MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-							MX6DL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
-						>;
-					};
-
-					pinctrl_enet_2: enetgrp-2 {
-						fsl,pins = <
-							MX6DL_PAD_KEY_COL1__ENET_MDIO        0x1b0b0
-							MX6DL_PAD_KEY_COL2__ENET_MDC         0x1b0b0
-							MX6DL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-							MX6DL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-							MX6DL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-							MX6DL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-							MX6DL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-							MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-							MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-							MX6DL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-							MX6DL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-							MX6DL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-							MX6DL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-							MX6DL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-							MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-						>;
-					};
-				};
-
-				gpmi-nand {
-					pinctrl_gpmi_nand_1: gpmi-nand-1 {
-						fsl,pins = <
-							MX6DL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
-							MX6DL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
-							MX6DL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
-							MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-							MX6DL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
-							MX6DL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
-							MX6DL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
-							MX6DL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
-							MX6DL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
-							MX6DL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
-							MX6DL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
-							MX6DL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
-							MX6DL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
-							MX6DL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
-							MX6DL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
-							MX6DL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
-							MX6DL_PAD_SD4_DAT0__NAND_DQS      0x00b1
-						>;
-					};
-				};
-
-				i2c1 {
-					pinctrl_i2c1_2: i2c1grp-2 {
-						fsl,pins = <
-							MX6DL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-							MX6DL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-						>;
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1_1: uart1grp-1 {
-						fsl,pins = <
-							MX6DL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
-							MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
-						>;
-					};
-				};
-
-				uart4 {
-					pinctrl_uart4_1: uart4grp-1 {
-						fsl,pins = <
-							MX6DL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
-							MX6DL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
-						>;
-					};
-				};
-
-				usbotg {
-					pinctrl_usbotg_2: usbotggrp-2 {
-						fsl,pins = <
-							MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
-						>;
-					};
-				};
-
-				usdhc2 {
-					pinctrl_usdhc2_1: usdhc2grp-1 {
-						fsl,pins = <
-							MX6DL_PAD_SD2_CMD__SD2_CMD    0x17059
-							MX6DL_PAD_SD2_CLK__SD2_CLK    0x10059
-							MX6DL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-							MX6DL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-							MX6DL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-							MX6DL_PAD_SD2_DAT3__SD2_DATA3 0x17059
-							MX6DL_PAD_NANDF_D4__SD2_DATA4 0x17059
-							MX6DL_PAD_NANDF_D5__SD2_DATA5 0x17059
-							MX6DL_PAD_NANDF_D6__SD2_DATA6 0x17059
-							MX6DL_PAD_NANDF_D7__SD2_DATA7 0x17059
-						>;
-					};
-				};
-
-				usdhc3 {
-					pinctrl_usdhc3_1: usdhc3grp-1 {
-						fsl,pins = <
-							MX6DL_PAD_SD3_CMD__SD3_CMD    0x17059
-							MX6DL_PAD_SD3_CLK__SD3_CLK    0x10059
-							MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-							MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-							MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-							MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-							MX6DL_PAD_SD3_DAT4__SD3_DATA4 0x17059
-							MX6DL_PAD_SD3_DAT5__SD3_DATA5 0x17059
-							MX6DL_PAD_SD3_DAT6__SD3_DATA6 0x17059
-							MX6DL_PAD_SD3_DAT7__SD3_DATA7 0x17059
-						>;
-					};
-
-					pinctrl_usdhc3_2: usdhc3grp_2 {
-						fsl,pins = <
-							MX6DL_PAD_SD3_CMD__SD3_CMD    0x17059
-							MX6DL_PAD_SD3_CLK__SD3_CLK    0x10059
-							MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-							MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-							MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-							MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-						>;
-					};
-				};
-
-				weim {
-					pinctrl_weim_cs0_1: weim_cs0grp-1 {
-						fsl,pins = <
-							MX6DL_PAD_EIM_CS0__EIM_CS0_B   0xb0b1
-						>;
-					};
-
-					pinctrl_weim_nor_1: weim_norgrp-1 {
-						fsl,pins = <
-							MX6DL_PAD_EIM_OE__EIM_OE_B     0xb0b1
-							MX6DL_PAD_EIM_RW__EIM_RW       0xb0b1
-							MX6DL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
-							/* data */
-							MX6DL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
-							MX6DL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
-							MX6DL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
-							MX6DL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
-							MX6DL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
-							MX6DL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
-							MX6DL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
-							MX6DL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
-							MX6DL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
-							MX6DL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
-							MX6DL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
-							MX6DL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
-							MX6DL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
-							MX6DL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
-							MX6DL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
-							MX6DL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
-							/* address */
-							MX6DL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
-							MX6DL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
-							MX6DL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
-							MX6DL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
-							MX6DL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
-							MX6DL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
-							MX6DL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
-							MX6DL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
-							MX6DL_PAD_EIM_DA15__EIM_AD15  0xb0b1
-							MX6DL_PAD_EIM_DA14__EIM_AD14  0xb0b1
-							MX6DL_PAD_EIM_DA13__EIM_AD13  0xb0b1
-							MX6DL_PAD_EIM_DA12__EIM_AD12  0xb0b1
-							MX6DL_PAD_EIM_DA11__EIM_AD11  0xb0b1
-							MX6DL_PAD_EIM_DA10__EIM_AD10  0xb0b1
-							MX6DL_PAD_EIM_DA9__EIM_AD09   0xb0b1
-							MX6DL_PAD_EIM_DA8__EIM_AD08   0xb0b1
-							MX6DL_PAD_EIM_DA7__EIM_AD07   0xb0b1
-							MX6DL_PAD_EIM_DA6__EIM_AD06   0xb0b1
-							MX6DL_PAD_EIM_DA5__EIM_AD05   0xb0b1
-							MX6DL_PAD_EIM_DA4__EIM_AD04   0xb0b1
-							MX6DL_PAD_EIM_DA3__EIM_AD03   0xb0b1
-							MX6DL_PAD_EIM_DA2__EIM_AD02   0xb0b1
-							MX6DL_PAD_EIM_DA1__EIM_AD01   0xb0b1
-							MX6DL_PAD_EIM_DA0__EIM_AD00   0xb0b1
-						>;
-					};
-
-				};
-
 			};
 
 			pxp: pxp@020f0000 {
@@ -294,3 +71,20 @@ i2c4: i2c@021f8000 {
 		};
 	};
 };
+
+&ldb {
+	clocks = <&clks 33>, <&clks 34>,
+		 <&clks 39>, <&clks 40>,
+		 <&clks 135>, <&clks 136>;
+	clock-names = "di0_pll", "di1_pll",
+		      "di0_sel", "di1_sel",
+		      "di0", "di1";
+
+	lvds-channel@0 {
+		crtcs = <&ipu1 0>, <&ipu1 1>;
+	};
+
+	lvds-channel@1 {
+		crtcs = <&ipu1 0>, <&ipu1 1>;
+	};
+};

arch/arm/boot/dts/imx6q-arm2.dts

@@ -57,7 +57,7 @@ &iomuxc {
 	hog {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6Q_PAD_EIM_D25__GPIO3_IO25 0x80000000
+				MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000
 			>;
 		};
 	};
@@ -65,8 +65,8 @@ MX6Q_PAD_EIM_D25__GPIO3_IO25 0x80000000
 	arm2 {
 		pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
 			fsl,pins = <
-				MX6Q_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
-				MX6Q_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
+				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
+				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
 			>;
 		};
 	};
@@ -97,6 +97,14 @@ &usdhc4 {
 	status = "okay";
 };
 
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_2>;
+	fsl,dte-mode;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4_1>;

arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi

@@ -20,6 +20,110 @@ memory {
 	};
 };
 
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3_1>;
+	status = "okay";
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 24 0>;
+
+	flash@0 {
+		compatible = "m25p80";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_1>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+	};
+
+	pmic@58 {
+		compatible = "dialog,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <17 0x8>; /* active-low GPIO4_17 */
+
+		regulators {
+			vddcore_reg: bcore1 {
+				regulator-min-microvolt = <730000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-always-on;
+			};
+
+			vddsoc_reg: bcore2 {
+				regulator-min-microvolt = <730000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-always-on;
+			};
+
+			vdd_ddr3_reg: bpro {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_reg: bperi {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_buckmem_reg: bmem {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_reg: bio {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_io_reg: ldo4 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vdd_mx6_snvs_reg: ldo5 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_pmic_io_reg: ldo6 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_sd0_reg: ldo9 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_sd1_reg: ldo10 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_mx6_high_reg: ldo11 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
@@ -27,7 +131,9 @@ &iomuxc {
 	hog {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6Q_PAD_EIM_D23__GPIO3_IO23    0x80000000
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
+				MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000 /* PMIC interrupt */
 			>;
 		};
 	};
@@ -35,8 +141,8 @@ MX6Q_PAD_EIM_D23__GPIO3_IO23    0x80000000
 	pfla02 {
 		pinctrl_usdhc3_pfla02: usdhc3grp-pfla02 {
 			fsl,pins = <
-				MX6Q_PAD_ENET_RXD0__GPIO1_IO27  0x80000000
-				MX6Q_PAD_ENET_TXD1__GPIO1_IO29  0x80000000
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
 			>;
 		};
 	};

arch/arm/boot/dts/imx6q-sabreauto.dts

@@ -20,24 +20,6 @@ / {
 	compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
 };
 
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hog {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6Q_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
-				MX6Q_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
-			>;
-		};
-	};
-
-	ecspi1 {
-		pinctrl_ecspi1_sabreauto: ecspi1-sabreauto {
-			fsl,pins = <
-				MX6Q_PAD_EIM_D19__GPIO3_IO19  0x80000000
-			>;
-		};
-	};
+&sata {
+	status = "okay";
 };

arch/arm/boot/dts/imx6q-sabrelite.dts

@@ -65,6 +65,10 @@ sound {
 	};
 };
 
+&sata {
+	status = "okay";
+};
+
 &ecspi1 {
 	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 0>;
@@ -91,14 +95,14 @@ &iomuxc {
 	hog {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6Q_PAD_NANDF_D6__GPIO2_IO06 0x80000000
-				MX6Q_PAD_NANDF_D7__GPIO2_IO07 0x80000000
-				MX6Q_PAD_EIM_D19__GPIO3_IO19  0x80000000
-				MX6Q_PAD_EIM_D22__GPIO3_IO22  0x80000000
-				MX6Q_PAD_EIM_D23__GPIO3_IO23  0x80000000
-				MX6Q_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
-				MX6Q_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
-				MX6Q_PAD_GPIO_0__CCM_CLKO1    0x80000000
+				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000
+				MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x80000000
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x80000000
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x80000000
 			>;
 		};
 	};
@@ -163,7 +167,7 @@ &i2c1 {
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 169>;
+		clocks = <&clks 201>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};

arch/arm/boot/dts/imx6q-sabresd.dts

@@ -20,21 +20,6 @@ / {
 	compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
 };
 
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	hog {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6Q_PAD_GPIO_4__GPIO1_IO04   0x80000000
-				MX6Q_PAD_GPIO_5__GPIO1_IO05   0x80000000
-				MX6Q_PAD_NANDF_D0__GPIO2_IO00 0x80000000
-				MX6Q_PAD_NANDF_D1__GPIO2_IO01 0x80000000
-				MX6Q_PAD_NANDF_D2__GPIO2_IO02 0x80000000
-				MX6Q_PAD_NANDF_D3__GPIO2_IO03 0x80000000
-				MX6Q_PAD_GPIO_0__CCM_CLKO1    0x130b0
-			>;
-		};
-	};
+&sata {
+	status = "okay";
 };

arch/arm/boot/dts/imx6q-wandboard.dts

+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-wandboard.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Quad Board";
+	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};

arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

@@ -45,6 +45,28 @@ &gpmi {
 	status = "okay";
 };
 
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
+				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
+			>;
+		};
+	};
+
+	ecspi1 {
+		pinctrl_ecspi1_sabreauto: ecspi1-sabreauto {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
+			>;
+		};
+	};
+};
+
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4_1>;

arch/arm/boot/dts/imx6qdl-sabresd.dtsi

@@ -27,6 +27,15 @@ reg_usb_otg_vbus: usb_otg_vbus {
 			enable-active-high;
 		};
 
+		reg_usb_h1_vbus: usb_h1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 29 0>;
+			enable-active-high;
+		};
+
 		reg_audio: wm8962_supply {
 			compatible = "regulator-fixed";
 			regulator-name = "wm8962-supply";
@@ -41,12 +50,14 @@ gpio-keys {
 		volume-up {
 			label = "Volume Up";
 			gpios = <&gpio1 4 0>;
+			gpio-key,wakeup;
 			linux,code = <115>; /* KEY_VOLUMEUP */
 		};
 
 		volume-down {
 			label = "Volume Down";
 			gpios = <&gpio1 5 0>;
+			gpio-key,wakeup;
 			linux,code = <114>; /* KEY_VOLUMEDOWN */
 		};
 	};
@@ -77,6 +88,22 @@ &audmux {
 	status = "okay";
 };
 
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 9 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_2>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet_1>;
@@ -93,7 +120,7 @@ &i2c1 {
 	codec: wm8962@1a {
 		compatible = "wlf,wm8962";
 		reg = <0x1a>;
-		clocks = <&clks 169>;
+		clocks = <&clks 201>;
 		DCVDD-supply = <&reg_audio>;
 		DBVDD-supply = <&reg_audio>;
 		AVDD-supply = <&reg_audio>;
@@ -113,6 +140,68 @@ codec: wm8962@1a {
        };
 };
 
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3_2>;
+	status = "okay";
+
+	egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <7 2>;
+		wakeup-gpios = <&gpio6 7 0>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04   0x80000000
+				MX6QDL_PAD_GPIO_5__GPIO1_IO05   0x80000000
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
 &ssi2 {
 	fsl,mode = "i2s-slave";
 	status = "okay";
@@ -125,6 +214,7 @@ &uart1 {
 };
 
 &usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6qdl-wandboard.dtsi

+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/ {
+	regulators {
+		compatible = "simple-bus";
+
+		reg_2p5v: 2p5v {
+			compatible = "regulator-fixed";
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6-wandboard-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6-wandboard-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_2>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1 	 0x130b0
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02	 0x80000000
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09	 0x80000000
+				MX6QDL_PAD_EIM_EB1__GPIO2_IO29   0x80000000 /* WL_REF_ON */
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02   0x80000000 /* WL_RST_N */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */
+			>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_1>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1_2>;
+	cd-gpios = <&gpio1 2 0>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2_2>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_2>;
+	cd-gpios = <&gpio3 9 0>;
+	status = "okay";
+};

arch/arm/boot/dts/imx6sl.dtsi

@@ -152,32 +152,41 @@ ecspi4: ecspi@02014000 {
 				};
 
 				uart5: serial@02018000 {
-					compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02018000 0x4000>;
 					interrupts = <0 30 0x04>;
 					clocks = <&clks IMX6SL_CLK_UART>,
 						 <&clks IMX6SL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
 				uart1: serial@02020000 {
-					compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02020000 0x4000>;
 					interrupts = <0 26 0x04>;
 					clocks = <&clks IMX6SL_CLK_UART>,
 						 <&clks IMX6SL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
 				uart2: serial@02024000 {
-					compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02024000 0x4000>;
 					interrupts = <0 27 0x04>;
 					clocks = <&clks IMX6SL_CLK_UART>,
 						 <&clks IMX6SL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -186,6 +195,9 @@ ssi1: ssi@02028000 {
 					reg = <0x02028000 0x4000>;
 					interrupts = <0 46 0x04>;
 					clocks = <&clks IMX6SL_CLK_SSI1>;
+					dmas = <&sdma 37 1 0>,
+					       <&sdma 38 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					status = "disabled";
 				};
@@ -195,6 +207,9 @@ ssi2: ssi@0202c000 {
 					reg = <0x0202c000 0x4000>;
 					interrupts = <0 47 0x04>;
 					clocks = <&clks IMX6SL_CLK_SSI2>;
+					dmas = <&sdma 41 1 0>,
+					       <&sdma 42 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					status = "disabled";
 				};
@@ -204,27 +219,36 @@ ssi3: ssi@02030000 {
 					reg = <0x02030000 0x4000>;
 					interrupts = <0 48 0x04>;
 					clocks = <&clks IMX6SL_CLK_SSI3>;
+					dmas = <&sdma 45 1 0>,
+					       <&sdma 46 1 0>;
+					dma-names = "rx", "tx";
 					fsl,fifo-depth = <15>;
 					status = "disabled";
 				};
 
 				uart3: serial@02034000 {
-					compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02034000 0x4000>;
 					interrupts = <0 28 0x04>;
 					clocks = <&clks IMX6SL_CLK_UART>,
 						 <&clks IMX6SL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
 				uart4: serial@02038000 {
-					compatible = "fsl,imx6sl-uart", "fsl,imx21-uart";
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02038000 0x4000>;
 					interrupts = <0 29 0x04>;
 					clocks = <&clks IMX6SL_CLK_UART>,
 						 <&clks IMX6SL_CLK_UART_SERIAL>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 			};
@@ -594,6 +618,7 @@ sdma: sdma@020ec000 {
 				clocks = <&clks IMX6SL_CLK_SDMA>,
 					 <&clks IMX6SL_CLK_SDMA>;
 				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6sl.bin";
 			};
 

arch/arm/boot/dts/vf610-twr.dts

@@ -50,6 +50,13 @@ &fec1 {
 	status = "okay";
 };
 
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_1>;
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_1>;

arch/arm/mach-imx/clk-imx51-imx53.c

@@ -119,7 +119,7 @@ enum imx5_clks {
 	srtc_gate, pata_gate, sata_gate, spdif_xtal_sel, spdif0_sel,
 	spdif1_sel, spdif0_pred, spdif0_podf, spdif1_pred, spdif1_podf,
 	spdif0_com_s, spdif1_com_sel, spdif0_gate, spdif1_gate, spdif_ipg_gate,
-	clk_max
+	ocram, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -506,6 +506,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 				mx53_can_sel, ARRAY_SIZE(mx53_can_sel));
 	clk[can1_serial_gate] = imx_clk_gate2("can1_serial_gate", "can_sel", MXC_CCM_CCGR6, 22);
 	clk[can1_ipg_gate] = imx_clk_gate2("can1_ipg_gate", "ipg", MXC_CCM_CCGR6, 20);
+	clk[ocram] = imx_clk_gate2("ocram", "ahb", MXC_CCM_CCGR6, 2);
 	clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "can_sel", MXC_CCM_CCGR4, 8);
 	clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6);
 	clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);

arch/arm/mach-imx/clk-imx6q.c

@@ -288,6 +288,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	struct device_node *np;
 	void __iomem *base;
 	int i, irq;
+	int ret;
 
 	clk[dummy] = imx_clk_fixed("dummy", 0);
 	clk[ckil] = imx_obtain_fixed_clock("ckil", 0);
@@ -592,6 +593,16 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 		clk_prepare_enable(clk[usbphy2_gate]);
 	}
 
+	/*
+	 * Let's initially set up CLKO with OSC24M, since this configuration
+	 * is widely used by imx6q board designs to clock audio codec.
+	 */
+	ret = clk_set_parent(clk[cko2_sel], clk[osc]);
+	if (!ret)
+		ret = clk_set_parent(clk[cko], clk[cko2]);
+	if (ret)
+		pr_warn("failed to set up CLKO: %d\n", ret);
+
 	/* Set initial power mode */
 	imx6q_set_lpm(WAIT_CLOCKED);
 

arch/arm/mach-imx/mach-imx6q.c

@@ -162,30 +162,6 @@ static int ar8031_phy_fixup(struct phy_device *dev)
 	return 0;
 }
 
-static void __init imx6q_sabrelite_cko1_setup(void)
-{
-	struct clk *cko1_sel, *ahb, *cko1;
-	unsigned long rate;
-
-	cko1_sel = clk_get_sys(NULL, "cko1_sel");
-	ahb = clk_get_sys(NULL, "ahb");
-	cko1 = clk_get_sys(NULL, "cko1");
-	if (IS_ERR(cko1_sel) || IS_ERR(ahb) || IS_ERR(cko1)) {
-		pr_err("cko1 setup failed!\n");
-		goto put_clk;
-	}
-	clk_set_parent(cko1_sel, ahb);
-	rate = clk_round_rate(cko1, 16000000);
-	clk_set_rate(cko1, rate);
-put_clk:
-	if (!IS_ERR(cko1_sel))
-		clk_put(cko1_sel);
-	if (!IS_ERR(ahb))
-		clk_put(ahb);
-	if (!IS_ERR(cko1))
-		clk_put(cko1);
-}
-
 #define PHY_ID_AR8031	0x004dd074
 
 static void __init imx6q_enet_phy_init(void)
@@ -200,45 +176,6 @@ static void __init imx6q_enet_phy_init(void)
 	}
 }
 
-static void __init imx6q_sabresd_cko1_setup(void)
-{
-	struct clk *cko1_sel, *pll4, *pll4_post, *cko1;
-	unsigned long rate;
-
-	cko1_sel = clk_get_sys(NULL, "cko1_sel");
-	pll4 = clk_get_sys(NULL, "pll4_audio");
-	pll4_post = clk_get_sys(NULL, "pll4_post_div");
-	cko1 = clk_get_sys(NULL, "cko1");
-	if (IS_ERR(cko1_sel) || IS_ERR(pll4)
-			|| IS_ERR(pll4_post) || IS_ERR(cko1)) {
-		pr_err("cko1 setup failed!\n");
-		goto put_clk;
-	}
-	/*
-	 * Setting pll4 at 768MHz (24MHz * 32)
-	 * So its child clock can get 24MHz easily
-	 */
-	clk_set_rate(pll4, 768000000);
-
-	clk_set_parent(cko1_sel, pll4_post);
-	rate = clk_round_rate(cko1, 24000000);
-	clk_set_rate(cko1, rate);
-put_clk:
-	if (!IS_ERR(cko1_sel))
-		clk_put(cko1_sel);
-	if (!IS_ERR(pll4_post))
-		clk_put(pll4_post);
-	if (!IS_ERR(pll4))
-		clk_put(pll4);
-	if (!IS_ERR(cko1))
-		clk_put(cko1);
-}
-
-static void __init imx6q_sabresd_init(void)
-{
-	imx6q_sabresd_cko1_setup();
-}
-
 static void __init imx6q_1588_init(void)
 {
 	struct regmap *gpr;
@@ -255,12 +192,6 @@ static void __init imx6q_1588_init(void)
 
 static void __init imx6q_init_machine(void)
 {
-	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
-		imx6q_sabrelite_cko1_setup();
-	else if (of_machine_is_compatible("fsl,imx6q-sabresd") ||
-			of_machine_is_compatible("fsl,imx6dl-sabresd"))
-		imx6q_sabresd_init();
-
 	imx6q_enet_phy_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);