phy/marvell: rename 88ec048 to 88e1318s and fix mscr1 addr

The marvell 88ec048's official part number is 88e1318s.  This patch renames
definitions in the driver to reflect this.

In addition, a minor bug fix has been added to write back the MSCR1 register
value properly.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/marvell.c

@@ -74,8 +74,8 @@
 #define MII_88E1121_PHY_MSCR_TX_DELAY	BIT(4)
 #define MII_88E1121_PHY_MSCR_DELAY_MASK	(~(0x3 << 4))
 
-#define MII_88EC048_PHY_MSCR1_REG	16
-#define MII_88EC048_PHY_MSCR1_PAD_ODD	BIT(6)
+#define MII_88E1318S_PHY_MSCR1_REG	16
+#define MII_88E1318S_PHY_MSCR1_PAD_ODD	BIT(6)
 
 #define MII_88E1121_PHY_LED_CTRL	16
 #define MII_88E1121_PHY_LED_PAGE	3
@@ -240,7 +240,7 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
 	return err;
 }
 
-static int m88ec048_config_aneg(struct phy_device *phydev)
+static int m88e1318_config_aneg(struct phy_device *phydev)
 {
 	int err, oldpage, mscr;
 
@@ -251,10 +251,10 @@ static int m88ec048_config_aneg(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
-	mscr = phy_read(phydev, MII_88EC048_PHY_MSCR1_REG);
-	mscr |= MII_88EC048_PHY_MSCR1_PAD_ODD;
+	mscr = phy_read(phydev, MII_88E1318S_PHY_MSCR1_REG);
+	mscr |= MII_88E1318S_PHY_MSCR1_PAD_ODD;
 
-	err = phy_write(phydev, MII_88E1121_PHY_MSCR_REG, mscr);
+	err = phy_write(phydev, MII_88E1318S_PHY_MSCR1_REG, mscr);
 	if (err < 0)
 		return err;
 
@@ -659,12 +659,12 @@ static struct phy_driver marvell_drivers[] = {
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
-		.phy_id = MARVELL_PHY_ID_88EC048,
+		.phy_id = MARVELL_PHY_ID_88E1318S,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
-		.name = "Marvell 88EC048",
+		.name = "Marvell 88E1318S",
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
-		.config_aneg = &m88ec048_config_aneg,
+		.config_aneg = &m88e1318_config_aneg,
 		.read_status = &marvell_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
 		.config_intr = &marvell_config_intr,

include/linux/marvell_phy.h

@@ -12,7 +12,7 @@
 #define MARVELL_PHY_ID_88E1121R		0x01410cb0
 #define MARVELL_PHY_ID_88E1145		0x01410cd0
 #define MARVELL_PHY_ID_88E1240		0x01410e30
-#define MARVELL_PHY_ID_88EC048		0x01410e90
+#define MARVELL_PHY_ID_88E1318S		0x01410e90
 
 /* struct phy_device dev_flags definitions */
 #define MARVELL_PHY_M1145_FLAGS_RESISTANCE	0x00000001