spi: bcm2835: only split transfers that exceed DLEN if DMA available

There is no use for this when performing non DMA operations. So we
bypass the split.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

drivers/spi/spi-bcm2835.c

@@ -895,15 +895,17 @@ static int bcm2835_spi_prepare_message(struct spi_master *master,
 	u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);
 	int ret;
 
-	/*
-	 * DMA transfers are limited to 16 bit (0 to 65535 bytes) by the SPI HW
-	 * due to DLEN. Split up transfers (32-bit FIFO aligned) if the limit is
-	 * exceeded.
-	 */
-	ret = spi_split_transfers_maxsize(master, msg, 65532,
-					  GFP_KERNEL | GFP_DMA);
-	if (ret)
-		return ret;
+	if (master->can_dma) {
+		/*
+		 * DMA transfers are limited to 16 bit (0 to 65535 bytes) by
+		 * the SPI HW due to DLEN. Split up transfers (32-bit FIFO
+		 * aligned) if the limit is exceeded.
+		 */
+		ret = spi_split_transfers_maxsize(master, msg, 65532,
+						  GFP_KERNEL | GFP_DMA);
+		if (ret)
+			return ret;
+	}
 
 	cs &= ~(BCM2835_SPI_CS_CPOL | BCM2835_SPI_CS_CPHA);