[MIPS] Sibyte: Replace use of removed IO_SPACE_BASE with IOADDR.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/mm/cerr-sb1.c

@@ -154,7 +154,7 @@ static void check_bus_watcher(void)
 	if (status & ~(1UL << 31)) {
 		l2_err = csr_in32(IOADDR(A_BUS_L2_ERRORS));
 #ifdef DUMP_L2_ECC_TAG_ON_ERROR
-		l2_tag = in64(IO_SPACE_BASE | A_L2_ECC_TAG);
+		l2_tag = in64(IOADDR(A_L2_ECC_TAG));
 #endif
 		memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS));
 		printk("Bus watcher error counters: %08x %08x\n", l2_err, memio_err);
@@ -183,9 +183,9 @@ asmlinkage void sb1_cache_error(void)
 #ifdef CONFIG_SIBYTE_BW_TRACE
 	/* Freeze the trace buffer now */
 #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
-	csr_out32(M_BCM1480_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+	csr_out32(M_BCM1480_SCD_TRACE_CFG_FREEZE, IOADDR(A_SCD_TRACE_CFG));
 #else
-	csr_out32(M_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+	csr_out32(M_SCD_TRACE_CFG_FREEZE, IOADDR(A_SCD_TRACE_CFG));
 #endif
 	printk("Trace buffer frozen\n");
 #endif

arch/mips/sibyte/bcm1480/irq.c

@@ -370,11 +370,11 @@ void __init arch_init_irq(void)
 #endif
 		/* Setup uart 1 settings, mapper */
 		/* QQQ FIXME */
-		__raw_writeq(M_DUART_IMR_BRK, IO_SPACE_BASE + A_DUART_IMRREG(kgdb_port));
+		__raw_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
 
 		__raw_writeq(IMR_IP6_VAL,
-			     IO_SPACE_BASE + A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
-			     (kgdb_irq<<3));
+			     IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
+			     (kgdb_irq << 3)));
 		bcm1480_unmask_irq(0, kgdb_irq);
 
 #ifdef CONFIG_GDB_CONSOLE