Commit 34232476 authored by Joachim Eastwood's avatar Joachim Eastwood Committed by David S. Miller

net/at91_ether: use macb functions for get/set hwaddr

Signed-off-by: default avatarJoachim Eastwood <manabian@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 314bccc4
......@@ -46,109 +46,6 @@
/* max number of receive buffers */
#define MAX_RX_DESCR 9
/* ......................... ADDRESS MANAGEMENT ........................ */
/*
* NOTE: Your bootloader must always set the MAC address correctly before
* booting into Linux.
*
* - It must always set the MAC address after reset, even if it doesn't
* happen to access the Ethernet while it's booting. Some versions of
* U-Boot on the AT91RM9200-DK do not do this.
*
* - Likewise it must store the addresses in the correct byte order.
* MicroMonitor (uMon) on the CSB337 does this incorrectly (and
* continues to do so, for bug-compatibility).
*/
static short __init unpack_mac_address(struct net_device *dev, unsigned int hi, unsigned int lo)
{
struct macb *lp = netdev_priv(dev);
char addr[6];
if (lp->board_data.rev_eth_addr) {
addr[5] = (lo & 0xff); /* The CSB337 bootloader stores the MAC the wrong-way around */
addr[4] = (lo & 0xff00) >> 8;
addr[3] = (lo & 0xff0000) >> 16;
addr[2] = (lo & 0xff000000) >> 24;
addr[1] = (hi & 0xff);
addr[0] = (hi & 0xff00) >> 8;
}
else {
addr[0] = (lo & 0xff);
addr[1] = (lo & 0xff00) >> 8;
addr[2] = (lo & 0xff0000) >> 16;
addr[3] = (lo & 0xff000000) >> 24;
addr[4] = (hi & 0xff);
addr[5] = (hi & 0xff00) >> 8;
}
if (is_valid_ether_addr(addr)) {
memcpy(dev->dev_addr, &addr, 6);
return 1;
}
return 0;
}
/*
* Set the ethernet MAC address in dev->dev_addr
*/
static void __init get_mac_address(struct net_device *dev)
{
struct macb *lp = netdev_priv(dev);
/* Check Specific-Address 1 */
if (unpack_mac_address(dev, macb_readl(lp, SA1T), macb_readl(lp, SA1B)))
return;
/* Check Specific-Address 2 */
if (unpack_mac_address(dev, macb_readl(lp, SA2T), macb_readl(lp, SA2B)))
return;
/* Check Specific-Address 3 */
if (unpack_mac_address(dev, macb_readl(lp, SA3T), macb_readl(lp, SA3B)))
return;
/* Check Specific-Address 4 */
if (unpack_mac_address(dev, macb_readl(lp, SA4T), macb_readl(lp, SA4B)))
return;
printk(KERN_ERR "at91_ether: Your bootloader did not configure a MAC address.\n");
}
/*
* Program the hardware MAC address from dev->dev_addr.
*/
static void update_mac_address(struct net_device *dev)
{
struct macb *lp = netdev_priv(dev);
macb_writel(lp, SA1B, (dev->dev_addr[3] << 24) | (dev->dev_addr[2] << 16)
| (dev->dev_addr[1] << 8) | (dev->dev_addr[0]));
macb_writel(lp, SA1T, (dev->dev_addr[5] << 8) | (dev->dev_addr[4]));
macb_writel(lp, SA2B, 0);
macb_writel(lp, SA2T, 0);
}
/*
* Store the new hardware address in dev->dev_addr, and update the MAC.
*/
static int set_mac_address(struct net_device *dev, void* addr)
{
struct sockaddr *address = addr;
if (!is_valid_ether_addr(address->sa_data))
return -EADDRNOTAVAIL;
memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
update_mac_address(dev);
printk("%s: Setting MAC address to %pM\n", dev->name,
dev->dev_addr);
return 0;
}
/* ................................ MAC ................................ */
/*
* Initialize and start the Receiver and Transmit subsystems
*/
......@@ -219,8 +116,7 @@ static int at91ether_open(struct net_device *dev)
ctl = macb_readl(lp, NCR);
macb_writel(lp, NCR, ctl | MACB_BIT(CLRSTAT));
/* Update the MAC address (incase user has changed it) */
update_mac_address(dev);
macb_set_hwaddr(lp);
ret = at91ether_start(dev);
if (ret)
......@@ -438,7 +334,7 @@ static const struct net_device_ops at91ether_netdev_ops = {
.ndo_start_xmit = at91ether_start_xmit,
.ndo_get_stats = at91ether_stats,
.ndo_set_rx_mode = macb_set_rx_mode,
.ndo_set_mac_address = set_mac_address,
.ndo_set_mac_address = eth_mac_addr,
.ndo_do_ioctl = macb_ioctl,
.ndo_validate_addr = eth_validate_addr,
.ndo_change_mtu = eth_change_mtu,
......@@ -557,9 +453,7 @@ static int __init at91ether_probe(struct platform_device *pdev)
res = at91ether_get_hwaddr_dt(lp);
if (res < 0)
get_mac_address(dev); /* Get ethernet address and store it in dev->dev_addr */
update_mac_address(dev); /* Program ethernet address into MAC */
macb_get_hwaddr(lp);
res = at91ether_get_phy_mode_dt(pdev);
if (res < 0) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment