clk: qcom: clk-alpha-pll: Add support to configure PLL_TEST_CTL_U2

The lucid ole pll reuses lucid evo ops but it has an additional test
control register which is required to be programmed, add support to
program the same.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524145203.13153-2-quic_jkona@quicinc.com

drivers/clk/qcom/clk-alpha-pll.c

@@ -55,6 +55,7 @@
 #define PLL_TEST_CTL(p)		((p)->offset + (p)->regs[PLL_OFF_TEST_CTL])
 #define PLL_TEST_CTL_U(p)	((p)->offset + (p)->regs[PLL_OFF_TEST_CTL_U])
 #define PLL_TEST_CTL_U1(p)     ((p)->offset + (p)->regs[PLL_OFF_TEST_CTL_U1])
+#define PLL_TEST_CTL_U2(p)     ((p)->offset + (p)->regs[PLL_OFF_TEST_CTL_U2])
 #define PLL_STATUS(p)		((p)->offset + (p)->regs[PLL_OFF_STATUS])
 #define PLL_OPMODE(p)		((p)->offset + (p)->regs[PLL_OFF_OPMODE])
 #define PLL_FRAC(p)		((p)->offset + (p)->regs[PLL_OFF_FRAC])
@@ -2096,6 +2097,7 @@ void clk_lucid_evo_pll_configure(struct clk_alpha_pll *pll, struct regmap *regma
 	clk_alpha_pll_write_config(regmap, PLL_TEST_CTL(pll), config->test_ctl_val);
 	clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U(pll), config->test_ctl_hi_val);
 	clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U1(pll), config->test_ctl_hi1_val);
+	clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U2(pll), config->test_ctl_hi2_val);
 
 	/* Disable PLL output */
 	regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);

drivers/clk/qcom/clk-alpha-pll.h

@@ -125,6 +125,7 @@ struct alpha_pll_config {
 	u32 test_ctl_val;
 	u32 test_ctl_hi_val;
 	u32 test_ctl_hi1_val;
+	u32 test_ctl_hi2_val;
 	u32 main_output_mask;
 	u32 aux_output_mask;
 	u32 aux2_output_mask;