[POWERPC] fsl: PCIe MSI support for 83xx/85xx/86xx processors.

This MSI driver can be used on 83xx/85xx/86xx board.
In this driver, virtual interrupt host and chip were
setup. There are 256 MSI interrupts in this host, Every 32
MSI interrupts cascaded to one IPIC/MPIC interrupt.
The chip was treated as edge sensitive and some necessary
functions were setup for this chip.

Before using the MSI interrupt, PCI/PCIE device need to
ask for a MSI interrupt in the 256 MSI interrupts. A 256bit
bitmap show which MSI interrupt was used, reserve bit in
the bitmap can be used to force the device use some designate
MSI interrupt in the 256 MSI interrupts. Sometimes this is useful
for testing the all the MSI interrupts. The msi-available-ranges
property in the dts file was used for this purpose.
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/sysdev/Makefile

@@ -4,6 +4,7 @@ endif
 
 mpic-msi-obj-$(CONFIG_PCI_MSI)	+= mpic_msi.o mpic_u3msi.o mpic_pasemi_msi.o
 obj-$(CONFIG_MPIC)		+= mpic.o $(mpic-msi-obj-y)
+fsl-msi-obj-$(CONFIG_PCI_MSI)	+= fsl_msi.o
 
 obj-$(CONFIG_PPC_MPC106)	+= grackle.o
 obj-$(CONFIG_PPC_DCR_NATIVE)	+= dcr-low.o
@@ -11,7 +12,7 @@ obj-$(CONFIG_PPC_PMI)		+= pmi.o
 obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
-obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o
+obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o $(fsl-msi-obj-y)
 obj-$(CONFIG_FSL_LBC)		+= fsl_lbc.o
 obj-$(CONFIG_RAPIDIO)		+= fsl_rio.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o

arch/powerpc/sysdev/fsl_msi.h

+/*
+ * Copyright (C) 2007-2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Tony Li <tony.li@freescale.com>
+ *	   Jason Jin <Jason.jin@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+#ifndef _POWERPC_SYSDEV_FSL_MSI_H
+#define _POWERPC_SYSDEV_FSL_MSI_H
+
+#define NR_MSI_REG		8
+#define IRQS_PER_MSI_REG	32
+#define NR_MSI_IRQS	(NR_MSI_REG * IRQS_PER_MSI_REG)
+
+#define FSL_PIC_IP_MASK	0x0000000F
+#define FSL_PIC_IP_MPIC	0x00000001
+#define FSL_PIC_IP_IPIC	0x00000002
+
+struct fsl_msi {
+	/* Device node of the MSI interrupt*/
+	struct device_node *of_node;
+
+	struct irq_host *irqhost;
+
+	unsigned long cascade_irq;
+
+	u32 msi_addr_lo;
+	u32 msi_addr_hi;
+	void __iomem *msi_regs;
+	u32 feature;
+
+	unsigned long *fsl_msi_bitmap;
+	spinlock_t bitmap_lock;
+};
+
+#endif /* _POWERPC_SYSDEV_FSL_MSI_H */
+

arch/powerpc/sysdev/fsl_pci.c

@@ -106,6 +106,16 @@ void __init setup_pci_cmd(struct pci_controller *hose)
 	}
 }
 
+#ifdef CONFIG_PCI_MSI
+void __init setup_pci_pcsrbar(struct pci_controller *hose)
+{
+	phys_addr_t immr_base;
+
+	immr_base = get_immrbase();
+	early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, immr_base);
+}
+#endif
+
 static int fsl_pcie_bus_fixup;
 
 static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
@@ -211,6 +221,10 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
 	/* Setup PEX window registers */
 	setup_pci_atmu(hose, &rsrc);
 
+	/* Setup PEXCSRBAR */
+#ifdef CONFIG_PCI_MSI
+	setup_pci_pcsrbar(hose);
+#endif
 	return 0;
 }