Merge branches 'pm-avs', 'pm-clk', 'pm-devfreq' and 'pm-sleep'

* pm-avs:
  PM / AVS: rockchip-io: add io selectors and supplies for rk3399

* pm-clk:
  PM / clk: Add support for obtaining clocks from device-tree

* pm-devfreq:
  PM / devfreq: Spelling s/frequnecy/frequency/

* pm-sleep:
  ACPI / PM: Runtime resume devices when waking from hibernate
  PM / sleep: Clear pm_suspend_global_flags upon hibernate

Documentation/devicetree/bindings/power/rockchip-io-domain.txt

@@ -35,6 +35,8 @@ Required properties:
   - "rockchip,rk3288-io-voltage-domain" for rk3288
   - "rockchip,rk3368-io-voltage-domain" for rk3368
   - "rockchip,rk3368-pmu-io-voltage-domain" for rk3368 pmu-domains
+  - "rockchip,rk3399-io-voltage-domain" for rk3399
+  - "rockchip,rk3399-pmu-io-voltage-domain" for rk3399 pmu-domains
 - rockchip,grf: phandle to the syscon managing the "general register files"
 
 
@@ -79,6 +81,15 @@ Possible supplies for rk3368 pmu-domains:
 - pmu-supply:    The supply connected to PMUIO_VDD.
 - vop-supply:    The supply connected to LCDC_VDD.
 
+Possible supplies for rk3399:
+- bt656-supply:  The supply connected to APIO2_VDD.
+- audio-supply:  The supply connected to APIO5_VDD.
+- sdmmc-supply:  The supply connected to SDMMC0_VDD.
+- gpio1830       The supply connected to APIO4_VDD.
+
+Possible supplies for rk3399 pmu-domains:
+- pmu1830-supply:The supply connected to PMUIO2_VDD.
+
 Example:
 
 	io-domains {

drivers/acpi/sleep.c

@@ -748,6 +748,7 @@ static int acpi_hibernation_enter(void)
 
 static void acpi_hibernation_leave(void)
 {
+	pm_set_resume_via_firmware();
 	/*
 	 * If ACPI is not enabled by the BIOS and the boot kernel, we need to
 	 * enable it here.

drivers/base/power/clock_ops.c

@@ -137,6 +137,62 @@ int pm_clk_add_clk(struct device *dev, struct clk *clk)
 	return __pm_clk_add(dev, NULL, clk);
 }
 
+
+/**
+ * of_pm_clk_add_clks - Start using device clock(s) for power management.
+ * @dev: Device whose clock(s) is going to be used for power management.
+ *
+ * Add a series of clocks described in the 'clocks' device-tree node for
+ * a device to the list of clocks used for the power management of @dev.
+ * On success, returns the number of clocks added. Returns a negative
+ * error code if there are no clocks in the device node for the device
+ * or if adding a clock fails.
+ */
+int of_pm_clk_add_clks(struct device *dev)
+{
+	struct clk **clks;
+	unsigned int i, count;
+	int ret;
+
+	if (!dev || !dev->of_node)
+		return -EINVAL;
+
+	count = of_count_phandle_with_args(dev->of_node, "clocks",
+					   "#clock-cells");
+	if (count == 0)
+		return -ENODEV;
+
+	clks = kcalloc(count, sizeof(*clks), GFP_KERNEL);
+	if (!clks)
+		return -ENOMEM;
+
+	for (i = 0; i < count; i++) {
+		clks[i] = of_clk_get(dev->of_node, i);
+		if (IS_ERR(clks[i])) {
+			ret = PTR_ERR(clks[i]);
+			goto error;
+		}
+
+		ret = pm_clk_add_clk(dev, clks[i]);
+		if (ret) {
+			clk_put(clks[i]);
+			goto error;
+		}
+	}
+
+	kfree(clks);
+
+	return i;
+
+error:
+	while (i--)
+		pm_clk_remove_clk(dev, clks[i]);
+
+	kfree(clks);
+
+	return ret;
+}
+
 /**
  * __pm_clk_remove - Destroy PM clock entry.
  * @ce: PM clock entry to destroy.
@@ -197,6 +253,39 @@ void pm_clk_remove(struct device *dev, const char *con_id)
 	__pm_clk_remove(ce);
 }
 
+/**
+ * pm_clk_remove_clk - Stop using a device clock for power management.
+ * @dev: Device whose clock should not be used for PM any more.
+ * @clk: Clock pointer
+ *
+ * Remove the clock pointed to by @clk from the list of clocks used for
+ * the power management of @dev.
+ */
+void pm_clk_remove_clk(struct device *dev, struct clk *clk)
+{
+	struct pm_subsys_data *psd = dev_to_psd(dev);
+	struct pm_clock_entry *ce;
+
+	if (!psd || !clk)
+		return;
+
+	spin_lock_irq(&psd->lock);
+
+	list_for_each_entry(ce, &psd->clock_list, node) {
+		if (clk == ce->clk)
+			goto remove;
+	}
+
+	spin_unlock_irq(&psd->lock);
+	return;
+
+ remove:
+	list_del(&ce->node);
+	spin_unlock_irq(&psd->lock);
+
+	__pm_clk_remove(ce);
+}
+
 /**
  * pm_clk_init - Initialize a device's list of power management clocks.
  * @dev: Device to initialize the list of PM clocks for.

drivers/devfreq/Kconfig

@@ -61,7 +61,7 @@ config DEVFREQ_GOV_USERSPACE
 	  Sets the frequency at the user specified one.
 	  This governor returns the user configured frequency if there
 	  has been an input to /sys/devices/.../power/devfreq_set_freq.
-	  Otherwise, the governor does not change the frequnecy
+	  Otherwise, the governor does not change the frequency
 	  given at the initialization.
 
 comment "DEVFREQ Drivers"

drivers/power/avs/rockchip-io-domain.c

@@ -47,6 +47,10 @@
 #define RK3368_SOC_CON15_FLASH0		BIT(14)
 #define RK3368_SOC_FLASH_SUPPLY_NUM	2
 
+#define RK3399_PMUGRF_CON0		0x180
+#define RK3399_PMUGRF_CON0_VSEL		BIT(8)
+#define RK3399_PMUGRF_VSEL_SUPPLY_NUM	9
+
 struct rockchip_iodomain;
 
 /**
@@ -181,6 +185,25 @@ static void rk3368_iodomain_init(struct rockchip_iodomain *iod)
 		dev_warn(iod->dev, "couldn't update flash0 ctrl\n");
 }
 
+static void rk3399_pmu_iodomain_init(struct rockchip_iodomain *iod)
+{
+	int ret;
+	u32 val;
+
+	/* if no pmu io supply we should leave things alone */
+	if (!iod->supplies[RK3399_PMUGRF_VSEL_SUPPLY_NUM].reg)
+		return;
+
+	/*
+	 * set pmu io iodomain to also use this framework
+	 * instead of a special gpio.
+	 */
+	val = RK3399_PMUGRF_CON0_VSEL | (RK3399_PMUGRF_CON0_VSEL << 16);
+	ret = regmap_write(iod->grf, RK3399_PMUGRF_CON0, val);
+	if (ret < 0)
+		dev_warn(iod->dev, "couldn't update pmu io iodomain ctrl\n");
+}
+
 /*
  * On the rk3188 the io-domains are handled by a shared register with the
  * lower 8 bits being still being continuing drive-strength settings.
@@ -252,6 +275,33 @@ static const struct rockchip_iodomain_soc_data soc_data_rk3368_pmu = {
 	},
 };
 
+static const struct rockchip_iodomain_soc_data soc_data_rk3399 = {
+	.grf_offset = 0xe640,
+	.supply_names = {
+		"bt656",		/* APIO2_VDD */
+		"audio",		/* APIO5_VDD */
+		"sdmmc",		/* SDMMC0_VDD */
+		"gpio1830",		/* APIO4_VDD */
+	},
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rk3399_pmu = {
+	.grf_offset = 0x180,
+	.supply_names = {
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		"pmu1830",		/* PMUIO2_VDD */
+	},
+	.init = rk3399_pmu_iodomain_init,
+};
+
 static const struct of_device_id rockchip_iodomain_match[] = {
 	{
 		.compatible = "rockchip,rk3188-io-voltage-domain",
@@ -269,6 +319,14 @@ static const struct of_device_id rockchip_iodomain_match[] = {
 		.compatible = "rockchip,rk3368-pmu-io-voltage-domain",
 		.data = (void *)&soc_data_rk3368_pmu
 	},
+	{
+		.compatible = "rockchip,rk3399-io-voltage-domain",
+		.data = (void *)&soc_data_rk3399
+	},
+	{
+		.compatible = "rockchip,rk3399-pmu-io-voltage-domain",
+		.data = (void *)&soc_data_rk3399_pmu
+	},
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, rockchip_iodomain_match);

include/linux/pm_clock.h

@@ -42,7 +42,9 @@ extern int pm_clk_create(struct device *dev);
 extern void pm_clk_destroy(struct device *dev);
 extern int pm_clk_add(struct device *dev, const char *con_id);
 extern int pm_clk_add_clk(struct device *dev, struct clk *clk);
+extern int of_pm_clk_add_clks(struct device *dev);
 extern void pm_clk_remove(struct device *dev, const char *con_id);
+extern void pm_clk_remove_clk(struct device *dev, struct clk *clk);
 extern int pm_clk_suspend(struct device *dev);
 extern int pm_clk_resume(struct device *dev);
 #else
@@ -69,11 +71,18 @@ static inline int pm_clk_add_clk(struct device *dev, struct clk *clk)
 {
 	return -EINVAL;
 }
+static inline int of_pm_clk_add_clks(struct device *dev)
+{
+	return -EINVAL;
+}
 static inline void pm_clk_remove(struct device *dev, const char *con_id)
 {
 }
 #define pm_clk_suspend	NULL
 #define pm_clk_resume	NULL
+static inline void pm_clk_remove_clk(struct device *dev, struct clk *clk)
+{
+}
 #endif
 
 #ifdef CONFIG_HAVE_CLK

kernel/power/hibernate.c

@@ -339,6 +339,7 @@ int hibernation_snapshot(int platform_mode)
 	pm_message_t msg;
 	int error;
 
+	pm_suspend_clear_flags();
 	error = platform_begin(platform_mode);
 	if (error)
 		goto Close;