mtd: spinand: Add initial support for Paragon PN26G0xA

Add initial support for Paragon Technology
PN26G01Axxxxx and PN26G02Axxxxx SPI NAND

Datasheets available at
http://www.xtxtech.com/upfile/2016082517274590.pdf
http://www.xtxtech.com/upfile/2016082517282329.pdfSigned-off-by: Jeff Kletsky <git-commits@allycomm.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

drivers/mtd/nand/spi/Makefile

 # SPDX-License-Identifier: GPL-2.0
-spinand-objs := core.o gigadevice.o macronix.o micron.o toshiba.o winbond.o
+spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o
 obj-$(CONFIG_MTD_SPI_NAND) += spinand.o

drivers/mtd/nand/spi/core.c

@@ -757,6 +757,7 @@ static const struct spinand_manufacturer *spinand_manufacturers[] = {
 	&gigadevice_spinand_manufacturer,
 	&macronix_spinand_manufacturer,
 	&micron_spinand_manufacturer,
+	&paragon_spinand_manufacturer,
 	&toshiba_spinand_manufacturer,
 	&winbond_spinand_manufacturer,
 };

drivers/mtd/nand/spi/paragon.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Jeff Kletsky
+ *
+ * Author: Jeff Kletsky <git-commits@allycomm.com>
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mtd/spinand.h>
+
+
+#define SPINAND_MFR_PARAGON	0xa1
+
+
+#define PN26G0XA_STATUS_ECC_BITMASK		(3 << 4)
+
+#define PN26G0XA_STATUS_ECC_NONE_DETECTED	(0 << 4)
+#define PN26G0XA_STATUS_ECC_1_7_CORRECTED	(1 << 4)
+#define PN26G0XA_STATUS_ECC_ERRORED		(2 << 4)
+#define PN26G0XA_STATUS_ECC_8_CORRECTED		(3 << 4)
+
+
+static SPINAND_OP_VARIANTS(read_cache_variants,
+		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants,
+		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
+		SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants,
+		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
+		SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
+
+static int pn26g0xa_ooblayout_ecc(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *region)
+{
+	if (section > 3)
+		return -ERANGE;
+
+	region->offset = 6 + (15 * section); /* 4 BBM + 2 user bytes */
+	region->length = 13;
+
+	return 0;
+}
+
+static int pn26g0xa_ooblayout_free(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *region)
+{
+	if (section > 4)
+		return -ERANGE;
+
+	if (section == 4) {
+		region->offset = 64;
+		region->length = 64;
+	} else {
+		region->offset = 4 + (15 * section);
+		region->length = 2;
+	}
+
+	return 0;
+}
+
+static int pn26g0xa_ecc_get_status(struct spinand_device *spinand,
+				   u8 status)
+{
+	switch (status & PN26G0XA_STATUS_ECC_BITMASK) {
+	case PN26G0XA_STATUS_ECC_NONE_DETECTED:
+		return 0;
+
+	case PN26G0XA_STATUS_ECC_1_7_CORRECTED:
+		return 7;	/* Return upper limit by convention */
+
+	case PN26G0XA_STATUS_ECC_8_CORRECTED:
+		return 8;
+
+	case PN26G0XA_STATUS_ECC_ERRORED:
+		return -EBADMSG;
+
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static const struct mtd_ooblayout_ops pn26g0xa_ooblayout = {
+	.ecc = pn26g0xa_ooblayout_ecc,
+	.free = pn26g0xa_ooblayout_free,
+};
+
+
+static const struct spinand_info paragon_spinand_table[] = {
+	SPINAND_INFO("PN26G01A", 0xe1,
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 21, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&pn26g0xa_ooblayout,
+				     pn26g0xa_ecc_get_status)),
+	SPINAND_INFO("PN26G02A", 0xe2,
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 41, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&pn26g0xa_ooblayout,
+				     pn26g0xa_ecc_get_status)),
+};
+
+static int paragon_spinand_detect(struct spinand_device *spinand)
+{
+	u8 *id = spinand->id.data;
+	int ret;
+
+	/* Read ID returns [0][MID][DID] */
+
+	if (id[1] != SPINAND_MFR_PARAGON)
+		return 0;
+
+	ret = spinand_match_and_init(spinand, paragon_spinand_table,
+				     ARRAY_SIZE(paragon_spinand_table),
+				     id[2]);
+	if (ret)
+		return ret;
+
+	return 1;
+}
+
+static const struct spinand_manufacturer_ops paragon_spinand_manuf_ops = {
+	.detect = paragon_spinand_detect,
+};
+
+const struct spinand_manufacturer paragon_spinand_manufacturer = {
+	.id = SPINAND_MFR_PARAGON,
+	.name = "Paragon",
+	.ops = &paragon_spinand_manuf_ops,
+};

include/linux/mtd/spinand.h

@@ -227,6 +227,7 @@ struct spinand_manufacturer {
 extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
 extern const struct spinand_manufacturer macronix_spinand_manufacturer;
 extern const struct spinand_manufacturer micron_spinand_manufacturer;
+extern const struct spinand_manufacturer paragon_spinand_manufacturer;
 extern const struct spinand_manufacturer toshiba_spinand_manufacturer;
 extern const struct spinand_manufacturer winbond_spinand_manufacturer;