Commit 356484ca authored by Olli Salonen's avatar Olli Salonen Committed by Mauro Carvalho Chehab

[media] dw2102: resync fifo when demod locks

If the streaming_ctrl is called to enable TS before demod has locked
the TS will be empty. Copied the solution from the dvbsky driver for the
TechnoTrend S2-4600 device: when the state changes from unlock to
lock, call su3000_streaming_ctrl again.
Signed-off-by: default avatarOlli Salonen <olli.salonen@iki.fi>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@osg.samsung.com>
parent c636bd0b
......@@ -117,8 +117,13 @@
struct dw2102_state {
u8 initialized;
u8 last_lock;
struct i2c_client *i2c_client_tuner;
/* fe hook functions*/
int (*old_set_voltage)(struct dvb_frontend *f, fe_sec_voltage_t v);
int (*fe_read_status)(struct dvb_frontend *fe,
fe_status_t *status);
};
/* debug */
......@@ -999,6 +1004,23 @@ static void dw210x_led_ctrl(struct dvb_frontend *fe, int offon)
i2c_transfer(&udev_adap->dev->i2c_adap, &msg, 1);
}
static int tt_s2_4600_read_status(struct dvb_frontend *fe, fe_status_t *status)
{
struct dvb_usb_adapter *d =
(struct dvb_usb_adapter *)(fe->dvb->priv);
struct dw2102_state *st = (struct dw2102_state *)d->dev->priv;
int ret;
ret = st->fe_read_status(fe, status);
/* resync slave fifo when signal change from unlock to lock */
if ((*status & FE_HAS_LOCK) && (!st->last_lock))
su3000_streaming_ctrl(d, 1);
st->last_lock = (*status & FE_HAS_LOCK) ? 1 : 0;
return ret;
}
static struct stv0299_config sharp_z0194a_config = {
.demod_address = 0x68,
.inittab = sharp_z0194a_inittab,
......@@ -1551,6 +1573,12 @@ static int tt_s2_4600_frontend_attach(struct dvb_usb_adapter *adap)
state->i2c_client_tuner = client;
/* hook fe: need to resync the slave fifo when signal locks */
state->fe_read_status = adap->fe_adap[0].fe->ops.read_status;
adap->fe_adap[0].fe->ops.read_status = tt_s2_4600_read_status;
state->last_lock = 0;
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment