net: pcs: xpcs: also ignore phy id if it's all ones

xpcs_get_id() searches multiple MMDs for a known PHY ID, starting with
MDIO_MMD_PCS (3). However not all integrators might have implemented
that MMD on their MDIO bus. For example, the NXP SJA1105 and SJA1110
switches only implement vendor-specific MMD 1 and 2.

When there is nothing on an MDIO bus at a certain address, traditionally
the bus returns 0xffff, which means that the bus remained in its default
pull-up state for the duration of the MDIO transaction. The 0xffff value
is widely used in drivers/net/phy/phy_device.c (see get_phy_c22_id for
example) to denote a missing device.

So it makes sense for the xpcs to ignore this value as well, and
continue its search, eventually finding the proper PHY ID in the
vendor-specific MMDs.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/pcs/pcs-xpcs.c

@@ -965,8 +965,10 @@ static u32 xpcs_get_id(struct dw_xpcs *xpcs)
 	if (ret < 0)
 		return 0xffffffff;
 
-	/* If Device IDs are not all zeros, we found C73 AN-type device */
-	if (id | ret)
+	/* If Device IDs are not all zeros or all ones,
+	 * we found C73 AN-type device
+	 */
+	if ((id | ret) && (id | ret) != 0xffffffff)
 		return id | ret;
 
 	/* Next, search C37 PCS using Vendor-Specific MII MMD */