Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb

* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (33 commits)
  V4L/DVB (3604): V4l printk fix
  V4L/DVB (3599c): Whitespace cleanups under Documentation/video4linux
  V4L/DVB (3599b): Whitespace cleanups under drivers/media
  V4L/DVB (3599a): Move drivers/usb/media to drivers/media/video
  V4L/DVB (3599): Implement new routing commands for wm8775 and cs53l32a.
  V4L/DVB (3598): Add bit algorithm adapter for the Conexant CX2341X boards.
  V4L/DVB (3597): Vivi: fix warning: implicit declaration of function 'in_interrupt'
  V4L/DVB (3588): Remove VIDIOC_G/S_AUDOUT from msp3400
  V4L/DVB (3587): Always wake thread after routing change.
  V4L/DVB (3584): Implement V4L2_TUNER_MODE_LANG1_LANG2 audio mode
  V4L/DVB (3582): Implement correct msp3400 input/output routing
  V4L/DVB (3581): Add new media/msp3400.h header containing the routing macros
  V4L/DVB (3580): Last round of msp3400 cleanups before adding routing commands
  V4L/DVB (3579): Move msp_modus to msp3400-kthreads, add JP and KR std detection
  V4L/DVB (3578): Make scart definitions easier to handle
  V4L/DVB (3577): Cleanup audio input handling
  V4L/DVB (3575): Cxusb: fix i2c debug messages for bluebird devices
  V4L/DVB (3574): Cxusb: fix debug messages
  V4L/DVB (3573): Cxusb: remove FIXME: comment in bluebird_patch_dvico_firmware_download
  V4L/DVB (3572): Cxusb: conditionalize gpio write for the medion box
  ...

Documentation/video4linux/README.cpia

@@ -87,7 +87,7 @@ hardware configuration of the parport. You can give the boot-parameter
 at the LILO-prompt or specify it in lilo.conf. I use the following
 append-line in lilo.conf:
 
-        append="parport=0x378,7,3"
+	append="parport=0x378,7,3"
 
 See Documentation/parport.txt for more information about the
 configuration of the parport and the values given above. Do not simply
@@ -175,7 +175,7 @@ THANKS (in no particular order):
 - Manuel J. Petit de Gabriel <mpetit@dit.upm.es> for providing help
   with Isabel (http://isabel.dit.upm.es/)
 - Bas Huisman <bhuism@cs.utwente.nl> for writing the initial parport code
-- Jarl Totland <Jarl.Totland@bdc.no> for setting up the mailing list 
+- Jarl Totland <Jarl.Totland@bdc.no> for setting up the mailing list
   and maintaining the web-server[3]
 - Chris Whiteford <Chris@informinteractive.com> for fixes related to the
   1.02 firmware

Documentation/video4linux/bttv/ICs

@@ -14,13 +14,13 @@ Hauppauge Win/TV pci (version 405):
 
 Microchip 24LC02B or
 Philips 8582E2Y: 256 Byte EEPROM with configuration information
-                 I2C 0xa0-0xa1, (24LC02B also responds to 0xa2-0xaf)
+		 I2C 0xa0-0xa1, (24LC02B also responds to 0xa2-0xaf)
 Philips SAA5246AGP/E: Videotext decoder chip, I2C 0x22-0x23
 TDA9800: sound decoder
 Winbond W24257AS-35: 32Kx8 CMOS static RAM (Videotext buffer mem)
 14052B: analog switch for selection of sound source
 
-PAL: 
+PAL:
 TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
 TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3
 

Documentation/video4linux/bttv/PROBLEMS

@@ -3,7 +3,7 @@
 - Start capturing by pressing "c" or by selecting it via a menu!!!
 
 - The memory of some S3 cards is not recognized right:
-  
+
   First of all, if you are not using XFree-3.2 or newer, upgrade AT LEAST to
   XFree-3.2A! This solved the problem for most people.
 
@@ -31,23 +31,23 @@
   (mostly with Trio 64 but also with some others)
   Get the free demo version of Accelerated X from www.xinside.com and try
   bttv with it. bttv seems to work with most S3 cards with Accelerated X.
-  
+
   Since I do not know much (better make that almost nothing) about VGA card
   programming I do not know the reason for this.
   Looks like XFree does something different when setting up the video memory?
-  Maybe somebody can enlighten me?  
-  Would be nice if somebody could get this to work with XFree since 
-  Accelerated X costs more than some of the grabber cards ... 
- 
+  Maybe somebody can enlighten me?
+  Would be nice if somebody could get this to work with XFree since
+  Accelerated X costs more than some of the grabber cards ...
+
   Better linear frame buffer support for S3 cards will probably be in
   XFree 4.0.
-  
+
 - Grabbing is not switched off when changing consoles with XFree.
   That's because XFree and some AcceleratedX versions do not send unmap
   events.
 
 - Some popup windows (e.g. of the window manager) are not refreshed.
-  
+
   Disable backing store by starting X with the option "-bs"
 
 - When using 32 bpp in XFree or 24+8bpp mode in AccelX 3.1 the system

Documentation/video4linux/bttv/README.quirks

@@ -38,9 +38,9 @@ tolerate.
 ------------------------
 
 When using the 430FX PCI, the following rules will ensure
-compatibility: 
+compatibility:
 
- (1) Deassert REQ at the same time as asserting FRAME. 
+ (1) Deassert REQ at the same time as asserting FRAME.
  (2) Do not reassert REQ to request another bus transaction until after
      finish-ing the previous transaction.
 

Documentation/video4linux/bttv/THANKS

 Many thanks to:
 
-- Markus Schroeder <schroedm@uni-duesseldorf.de> for information on the Bt848 
+- Markus Schroeder <schroedm@uni-duesseldorf.de> for information on the Bt848
   and tuner programming and his control program xtvc.
 
 - Martin Buck <martin-2.buck@student.uni-ulm.de> for his great Videotext
@@ -16,7 +16,7 @@ Many thanks to:
 - MIRO for providing a free PCTV card and detailed information about the
   components on their cards. (E.g. how the tuner type is detected)
   Without their card I could not have debugged the NTSC mode.
-	
+
 - Hauppauge for telling how the sound input is selected and what components
   they do and will use on their radio cards.
   Also many thanks for faxing me the FM1216 data sheet.

Documentation/video4linux/radiotrack.txt

@@ -131,17 +131,17 @@ Check Stereo:   BASE <-- 0xd8  (current volume, stereo detect,
 		x=0xff ==> "not stereo", x=0xfd ==> "stereo detected"
 
 Set Frequency:  code = (freq*40) + 10486188
-                foreach of the 24 bits in code,
-                (from Least to Most Significant):
-                  to write a "zero" bit,
-                    BASE <-- 0x01  (audio mute, no stereo detect, radio
+		foreach of the 24 bits in code,
+		(from Least to Most Significant):
+		  to write a "zero" bit,
+		    BASE <-- 0x01  (audio mute, no stereo detect, radio
 				    disable, "zero" bit phase 1, tuner adjust)
-                    BASE <-- 0x03  (audio mute, no stereo detect, radio
+		    BASE <-- 0x03  (audio mute, no stereo detect, radio
 				    disable, "zero" bit phase 2, tuner adjust)
-                  to write a "one" bit,
-                    BASE <-- 0x05  (audio mute, no stereo detect, radio
+		  to write a "one" bit,
+		    BASE <-- 0x05  (audio mute, no stereo detect, radio
 				    disable, "one" bit phase 1, tuner adjust)
-                    BASE <-- 0x07  (audio mute, no stereo detect, radio
+		    BASE <-- 0x07  (audio mute, no stereo detect, radio
 				    disable, "one" bit phase 2, tuner adjust)
 
 ----------------------------------------------------------------------------

Documentation/video4linux/w9966.txt

@@ -26,7 +26,7 @@ is called VIDEO_PALETTE_YUV422 (16 bpp).
 A minimal test application (with source) is available from:
   http://hem.fyristorg.com/mogul/w9966.html
 
-The slow framerate is due to missing DMA ECP read support in the 
+The slow framerate is due to missing DMA ECP read support in the
 parport drivers. I might add working EPP support later.
 
 Good luck!

Documentation/video4linux/zr36120.txt

@@ -2,7 +2,7 @@ Driver for Trust Computer Products Framegrabber, version 0.6.1
 ------ --- ----- -------- -------- ------------  ------- - - -
 
 - ZORAN ------------------------------------------------------
- Author: Pauline Middelink <middelin@polyware.nl> 
+ Author: Pauline Middelink <middelin@polyware.nl>
    Date: 18 September 1999
 Version: 0.6.1
 
@@ -115,7 +115,7 @@ After making/checking the devices do:
 <n> is the cardtype of the card you have. The cardnumber can
 be found in the source of zr36120. Look for tvcards. If your
 card is not there, please try if any other card gives some
-response, and mail me if you got a working tvcard addition. 
+response, and mail me if you got a working tvcard addition.
 
 PS. <TVCard editors behold!)
     Dont forget to set video_input to the number of inputs

drivers/media/Kconfig

@@ -50,5 +50,19 @@ config VIDEO_IR
 config VIDEO_TVEEPROM
 	tristate
 
+config USB_DABUSB
+        tristate "DABUSB driver"
+        depends on USB
+        ---help---
+          A Digital Audio Broadcasting (DAB) Receiver for USB and Linux
+          brought to you by the DAB-Team
+          <http://wwwbode.cs.tum.edu/Par/arch/dab/>.  This driver can be taken
+          as an example for URB-based bulk, control, and isochronous
+          transactions. URB's are explained in
+          <Documentation/usb/URB.txt>.
+
+          To compile this driver as a module, choose M here: the
+          module will be called dabusb.
+
 endmenu
 

drivers/media/common/saa7146_fops.c

@@ -50,14 +50,15 @@ void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits)
 /********************************************************************************/
 /* common dma functions */
 
-void saa7146_dma_free(struct saa7146_dev *dev,struct saa7146_buf *buf)
+void saa7146_dma_free(struct saa7146_dev *dev,struct videobuf_queue *q,
+						struct saa7146_buf *buf)
 {
 	DEB_EE(("dev:%p, buf:%p\n",dev,buf));
 
 	BUG_ON(in_interrupt());
 
 	videobuf_waiton(&buf->vb,0,0);
-	videobuf_dma_pci_unmap(dev->pci, &buf->vb.dma);
+	videobuf_dma_unmap(q, &buf->vb.dma);
 	videobuf_dma_free(&buf->vb.dma);
 	buf->vb.state = STATE_NEEDS_INIT;
 }

drivers/media/common/saa7146_vbi.c

@@ -236,7 +236,7 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,e
 	}
 
 	if (buf->vb.size != size)
-		saa7146_dma_free(dev,buf);
+		saa7146_dma_free(dev,q,buf);
 
 	if (STATE_NEEDS_INIT == buf->vb.state) {
 		buf->vb.width  = llength;
@@ -247,7 +247,7 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,e
 		saa7146_pgtable_free(dev->pci, &buf->pt[2]);
 		saa7146_pgtable_alloc(dev->pci, &buf->pt[2]);
 
-		err = videobuf_iolock(dev->pci,&buf->vb, NULL);
+		err = videobuf_iolock(q,&buf->vb, NULL);
 		if (err)
 			goto oops;
 		err = saa7146_pgtable_build_single(dev->pci, &buf->pt[2], buf->vb.dma.sglist, buf->vb.dma.sglen);
@@ -261,7 +261,7 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,e
 
  oops:
 	DEB_VBI(("error out.\n"));
-	saa7146_dma_free(dev,buf);
+	saa7146_dma_free(dev,q,buf);
 
 	return err;
 }
@@ -301,7 +301,7 @@ static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
 	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
 
 	DEB_VBI(("vb:%p\n",vb));
-	saa7146_dma_free(dev,buf);
+	saa7146_dma_free(dev,q,buf);
 }
 
 static struct videobuf_queue_ops vbi_qops = {

drivers/media/common/saa7146_video.c

@@ -1275,7 +1275,7 @@ static int buffer_prepare(struct videobuf_queue *q,
 	    buf->vb.field  != field      ||
 	    buf->vb.field  != fh->video_fmt.field  ||
 	    buf->fmt       != &fh->video_fmt) {
-		saa7146_dma_free(dev,buf);
+		saa7146_dma_free(dev,q,buf);
 	}
 
 	if (STATE_NEEDS_INIT == buf->vb.state) {
@@ -1304,7 +1304,7 @@ static int buffer_prepare(struct videobuf_queue *q,
 			saa7146_pgtable_alloc(dev->pci, &buf->pt[0]);
 		}
 
-		err = videobuf_iolock(dev->pci,&buf->vb, &vv->ov_fb);
+		err = videobuf_iolock(q,&buf->vb, &vv->ov_fb);
 		if (err)
 			goto oops;
 		err = saa7146_pgtable_build(dev,buf);
@@ -1318,7 +1318,7 @@ static int buffer_prepare(struct videobuf_queue *q,
 
  oops:
 	DEB_D(("error out.\n"));
-	saa7146_dma_free(dev,buf);
+	saa7146_dma_free(dev,q,buf);
 
 	return err;
 }
@@ -1363,7 +1363,7 @@ static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
 	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
 
 	DEB_CAP(("vbuf:%p\n",vb));
-	saa7146_dma_free(dev,buf);
+	saa7146_dma_free(dev,q,buf);
 }
 
 static struct videobuf_queue_ops video_qops = {

drivers/media/dvb/b2c2/flexcop-usb.c

@@ -541,6 +541,7 @@ static struct usb_device_id flexcop_usb_table [] = {
 	    { USB_DEVICE(0x0af7, 0x0101) },
 	    { }
 };
+MODULE_DEVICE_TABLE (usb, flexcop_usb_table);
 
 /* usb specific object needed to register this driver with the usb subsystem */
 static struct usb_driver flexcop_usb_driver = {

drivers/media/dvb/bt8xx/Makefile

 obj-$(CONFIG_DVB_BT8XX) += bt878.o dvb-bt8xx.o dst.o dst_ca.o
 
-EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/video -Idrivers/media/dvb/frontends
+EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/video/bt8xx -Idrivers/media/dvb/frontends

drivers/media/dvb/dvb-usb/cxusb.c

@@ -81,18 +81,19 @@ static int cxusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
 		return -EAGAIN;
 
 	if (num > 2)
-		warn("more than 2 i2c messages at a time is not handled yet. TODO.");
+		warn("more than two i2c messages at a time is not handled yet. TODO.");
 
 	for (i = 0; i < num; i++) {
 
-		switch (msg[i].addr) {
-			case 0x63:
-				cxusb_gpio_tuner(d,0);
-				break;
-			default:
-				cxusb_gpio_tuner(d,1);
-				break;
-		}
+		if (d->udev->descriptor.idVendor == USB_VID_MEDION)
+			switch (msg[i].addr) {
+				case 0x63:
+					cxusb_gpio_tuner(d,0);
+					break;
+				default:
+					cxusb_gpio_tuner(d,1);
+					break;
+			}
 
 		/* read request */
 		if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
@@ -108,7 +109,7 @@ static int cxusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
 				break;
 
 			if (ibuf[0] != 0x08)
-				deb_info("i2c read could have been failed\n");
+				deb_i2c("i2c read may have failed\n");
 
 			memcpy(msg[i+1].buf,&ibuf[1],msg[i+1].len);
 
@@ -122,7 +123,7 @@ static int cxusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
 			if (cxusb_ctrl_msg(d,CMD_I2C_WRITE, obuf, 2+msg[i].len, &ibuf,1) < 0)
 				break;
 			if (ibuf != 0x08)
-				deb_info("i2c write could have been failed\n");
+				deb_i2c("i2c write may have failed\n");
 		}
 	}
 
@@ -410,7 +411,6 @@ static int bluebird_patch_dvico_firmware_download(struct usb_device *udev, const
 	if (fw->data[BLUEBIRD_01_ID_OFFSET] == (USB_VID_DVICO & 0xff) &&
 	    fw->data[BLUEBIRD_01_ID_OFFSET + 1] == USB_VID_DVICO >> 8) {
 
-		/* FIXME: are we allowed to change the fw-data ? */
 		fw->data[BLUEBIRD_01_ID_OFFSET + 2] = udev->descriptor.idProduct + 1;
 		fw->data[BLUEBIRD_01_ID_OFFSET + 3] = udev->descriptor.idProduct >> 8;
 

drivers/media/dvb/dvb-usb/cxusb.h

@@ -6,6 +6,8 @@
 
 extern int dvb_usb_cxusb_debug;
 #define deb_info(args...)   dprintk(dvb_usb_cxusb_debug,0x01,args)
+#define deb_i2c(args...)    if (d->udev->descriptor.idVendor == USB_VID_MEDION) \
+				dprintk(dvb_usb_cxusb_debug,0x01,args)
 
 /* usb commands - some of it are guesses, don't have a reference yet */
 #define CMD_I2C_WRITE     0x08

drivers/media/dvb/ttpci/av7110_v4l.c

@@ -369,6 +369,11 @@ static int av7110_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
 			fm_matrix = 0x3001; // stereo
 			src = 0x0020;
 			break;
+		case V4L2_TUNER_MODE_LANG1_LANG2:
+			dprintk(2, "VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG1_LANG2\n");
+			fm_matrix = 0x3000; // bilingual
+			src = 0x0020;
+			break;
 		case V4L2_TUNER_MODE_LANG1:
 			dprintk(2, "VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG1\n");
 			fm_matrix = 0x3000; // mono

drivers/media/video/Kconfig

@@ -16,31 +16,7 @@ config VIDEO_ADV_DEBUG
 	  V4L devices.
 	  In doubt, say N.
 
-config VIDEO_BT848
-	tristate "BT848 Video For Linux"
-	depends on VIDEO_DEV && PCI && I2C
-	select I2C_ALGOBIT
-	select FW_LOADER
-	select VIDEO_BTCX
-	select VIDEO_BUF
-	select VIDEO_IR
-	select VIDEO_TUNER
-	select VIDEO_TVEEPROM
-	select VIDEO_MSP3400
-	---help---
-	  Support for BT848 based frame grabber/overlay boards. This includes
-	  the Miro, Hauppauge and STB boards. Please read the material in
-	  <file:Documentation/video4linux/bttv/> for more information.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bttv.
-
-config VIDEO_BT848_DVB
-	bool "DVB/ATSC Support for bt878 based TV cards"
-	depends on VIDEO_BT848 && DVB_CORE
-	select DVB_BT8XX
-	---help---
-	  This adds support for DVB/ATSC cards based on the BT878 chip.
+source "drivers/media/video/bt8xx/Kconfig"
 
 config VIDEO_SAA6588
 	tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
@@ -315,8 +291,6 @@ config VIDEO_HEXIUM_GEMINI
 
 source "drivers/media/video/cx88/Kconfig"
 
-source "drivers/media/video/em28xx/Kconfig"
-
 config VIDEO_OVCAMCHIP
 	tristate "OmniVision Camera Chip support"
 	depends on VIDEO_DEV && I2C
@@ -391,4 +365,234 @@ config VIDEO_SAA7127
 	  To compile this driver as a module, choose M here: the
 	  module will be called saa7127
 
+#
+# USB Multimedia device configuration
+#
+
+menu "V4L USB devices"
+	depends on USB && VIDEO_DEV
+
+source "drivers/media/video/em28xx/Kconfig"
+
+config USB_VICAM
+	tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"
+	depends on USB && VIDEO_DEV && EXPERIMENTAL
+	---help---
+	  Say Y here if you have 3com homeconnect camera (vicam).
+
+	  This driver uses the Video For Linux API. You must say Y or M to
+	  "Video For Linux" (under Multimedia Devices) to use this driver.
+	  Information on this API and pointers to "v4l" programs may be found
+	  at <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vicam.
+
+config USB_DSBR
+	tristate "D-Link USB FM radio support (EXPERIMENTAL)"
+	depends on USB && VIDEO_DEV && EXPERIMENTAL
+	---help---
+	  Say Y here if you want to connect this type of radio to your
+	  computer's USB port. Note that the audio is not digital, and
+	  you must connect the line out connector to a sound card or a
+	  set of speakers.
+
+	  This driver uses the Video For Linux API.  You must enable
+	  (Y or M in config) Video For Linux (under Character Devices)
+	  to use this driver.  Information on this API and pointers to
+	  "v4l" programs may be found at
+	  <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called dsbr100.
+
+config USB_ET61X251
+	tristate "USB ET61X[12]51 PC Camera Controller support"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y here if you want support for cameras based on Etoms ET61X151
+	  or ET61X251 PC Camera Controllers.
+
+	  See <file:Documentation/usb/et61x251.txt> for more informations.
+
+	  This driver uses the Video For Linux API. You must say Y or M to
+	  "Video For Linux" to use this driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called et61x251.
+
+config USB_IBMCAM
+	tristate "USB IBM (Xirlink) C-it Camera support"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y here if you want to connect a IBM "C-It" camera, also known as
+	  "Xirlink PC Camera" to your computer's USB port.  For more
+	  information, read <file:Documentation/usb/ibmcam.txt>.
+
+	  This driver uses the Video For Linux API.  You must enable
+	  (Y or M in config) Video For Linux (under Character Devices)
+	  to use this driver.  Information on this API and pointers to
+	  "v4l" programs may be found at
+	  <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ibmcam.
+
+	  This camera has several configuration options which
+	  can be specified when you load the module. Read
+	  <file:Documentation/usb/ibmcam.txt> to learn more.
+
+config USB_KONICAWC
+	tristate "USB Konica Webcam support"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y here if you want support for webcams based on a Konica
+	  chipset. This is known to work with the Intel YC76 webcam.
+
+	  This driver uses the Video For Linux API.  You must enable
+	  (Y or M in config) Video For Linux (under Character Devices)
+	  to use this driver.  Information on this API and pointers to
+	  "v4l" programs may be found at
+	  <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called konicawc.
+
+config USB_OV511
+	tristate "USB OV511 Camera support"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y here if you want to connect this type of camera to your
+	  computer's USB port. See <file:Documentation/usb/ov511.txt> for more
+	  information and for a list of supported cameras.
+
+	  This driver uses the Video For Linux API. You must say Y or M to
+	  "Video For Linux" (under Character Devices) to use this driver.
+	  Information on this API and pointers to "v4l" programs may be found
+	  at <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ov511.
+
+config USB_SE401
+	tristate "USB SE401 Camera support"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y here if you want to connect this type of camera to your
+	  computer's USB port. See <file:Documentation/usb/se401.txt> for more
+	  information and for a list of supported cameras.
+
+	  This driver uses the Video For Linux API. You must say Y or M to
+	  "Video For Linux" (under Multimedia Devices) to use this driver.
+	  Information on this API and pointers to "v4l" programs may be found
+	  at <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called se401.
+
+config USB_SN9C102
+	tristate "USB SN9C10x PC Camera Controller support"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y here if you want support for cameras based on SONiX SN9C101,
+	  SN9C102 or SN9C103 PC Camera Controllers.
+
+	  See <file:Documentation/usb/sn9c102.txt> for more informations.
+
+	  This driver uses the Video For Linux API. You must say Y or M to
+	  "Video For Linux" to use this driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sn9c102.
+
+config USB_STV680
+	tristate "USB STV680 (Pencam) Camera support"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y here if you want to connect this type of camera to your
+	  computer's USB port. This includes the Pencam line of cameras.
+	  See <file:Documentation/usb/stv680.txt> for more information and for
+	  a list of supported cameras.
+
+	  This driver uses the Video For Linux API. You must say Y or M to
+	  "Video For Linux" (under Multimedia Devices) to use this driver.
+	  Information on this API and pointers to "v4l" programs may be found
+	  at <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stv680.
+
+config USB_W9968CF
+	tristate "USB W996[87]CF JPEG Dual Mode Camera support"
+	depends on USB && VIDEO_DEV && I2C && VIDEO_OVCAMCHIP
+	---help---
+	  Say Y here if you want support for cameras based on OV681 or
+	  Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
+
+	  This driver has an optional plugin, which is distributed as a
+	  separate module only (released under GPL). It allows to use higher
+	  resolutions and framerates, but cannot be included in the official
+	  Linux kernel for performance purposes.
+
+	  See <file:Documentation/usb/w9968cf.txt> for more informations.
+
+	  This driver uses the Video For Linux and the I2C APIs. It needs the
+	  OmniVision Camera Chip support as well. You must say Y or M to
+	  "Video For Linux", "I2C Support" and "OmniVision Camera Chip
+	  support" to use this driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called w9968cf.
+
+config USB_ZC0301
+	tristate "USB ZC0301 Image Processor and Control Chip support"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y here if you want support for cameras based on the ZC0301
+	  Image Processor and Control Chip.
+
+	  See <file:Documentation/usb/zc0301.txt> for more informations.
+
+	  This driver uses the Video For Linux API. You must say Y or M to
+	  "Video For Linux" to use this driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called zc0301.
+
+config USB_PWC
+	tristate "USB Philips Cameras"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y or M here if you want to use one of these Philips & OEM
+	  webcams:
+	   * Philips PCA645, PCA646
+	   * Philips PCVC675, PCVC680, PCVC690
+	   * Philips PCVC720/40, PCVC730, PCVC740, PCVC750
+	   * Askey VC010
+	   * Logitech QuickCam Pro 3000, 4000, 'Zoom', 'Notebook Pro'
+	     and 'Orbit'/'Sphere'
+	   * Samsung MPC-C10, MPC-C30
+	   * Creative Webcam 5, Pro Ex
+	   * SOTEC Afina Eye
+	   * Visionite VCS-UC300, VCS-UM100
+
+	  The PCA635, PCVC665 and PCVC720/20 are not supported by this driver
+	  and never will be, but the 665 and 720/20 are supported by other
+	  drivers.
+
+	  See <file:Documentation/usb/philips.txt> for more information and
+	  installation instructions.
+
+	  The built-in microphone is enabled by selecting USB Audio support.
+
+	  This driver uses the Video For Linux API. You must say Y or M to
+	  "Video For Linux" (under Character Devices) to use this driver.
+	  Information on this API and pointers to "v4l" programs may be found
+	  at <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pwc.
+
+endmenu # V4L USB devices
+
 endmenu

drivers/media/video/Makefile

@@ -2,9 +2,6 @@
 # Makefile for the video capture/playback device drivers.
 #
 
-bttv-objs	:=	bttv-driver.o bttv-cards.o bttv-if.o \
-			bttv-risc.o bttv-vbi.o bttv-i2c.o bttv-gpio.o \
-			bttv-input.o
 zoran-objs      :=	zr36120.o zr36120_i2c.o zr36120_mem.o
 zr36067-objs	:=	zoran_procfs.o zoran_device.o \
 			zoran_driver.o zoran_card.o
@@ -15,8 +12,8 @@ msp3400-objs	:=	msp3400-driver.o msp3400-kthreads.o
 
 obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o v4l1-compat.o compat_ioctl32.o
 
-obj-$(CONFIG_VIDEO_BT848) += bttv.o tvaudio.o \
-	tda7432.o tda9875.o ir-kbd-i2c.o
+obj-$(CONFIG_VIDEO_BT848) += bt8xx/
+obj-$(CONFIG_VIDEO_BT848) += tvaudio.o tda7432.o tda9875.o ir-kbd-i2c.o
 obj-$(CONFIG_SOUND_TVMIXER) += tvmixer.o
 
 obj-$(CONFIG_VIDEO_ZR36120) += zoran.o
@@ -68,4 +65,23 @@ obj-$(CONFIG_VIDEO_CX25840) += cx25840/
 obj-$(CONFIG_VIDEO_SAA711X) += saa7115.o
 obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o
 
+et61x251-objs   := et61x251_core.o et61x251_tas5130d1b.o
+zc0301-objs     := zc0301_core.o zc0301_pas202bcb.o
+
+obj-$(CONFIG_USB_DABUSB)        += dabusb.o
+obj-$(CONFIG_USB_DSBR)          += dsbr100.o
+obj-$(CONFIG_USB_OV511)         += ov511.o
+obj-$(CONFIG_USB_SE401)         += se401.o
+obj-$(CONFIG_USB_STV680)        += stv680.o
+obj-$(CONFIG_USB_W9968CF)       += w9968cf.o
+
+obj-$(CONFIG_USB_SN9C102)       += sn9c102/
+obj-$(CONFIG_USB_ET61X251)      += et61x251/
+obj-$(CONFIG_USB_PWC)           += pwc/
+obj-$(CONFIG_USB_ZC0301)        += zc0301/
+
+obj-$(CONFIG_USB_IBMCAM)        += usbvideo/
+obj-$(CONFIG_USB_KONICAWC)      += usbvideo/
+obj-$(CONFIG_USB_VICAM)         += usbvideo/
+
 EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core

drivers/media/video/adv7170.c

-/* 
+/*
  * adv7170 - adv7170, adv7171 video encoder driver version 0.0.1
  *
  * Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com>
  *
- * Based on adv7176 driver by:    
+ * Based on adv7176 driver by:
  *
  * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
  * Copyright (C) 1999 Wolfgang Scherr <scherr@net4you.net>
@@ -173,7 +173,7 @@ adv7170_write_block (struct i2c_client *client,
 static const unsigned char init_NTSC[] = {
 	0x00, 0x10,		// MR0
 	0x01, 0x20,		// MR1
-	0x02, 0x0e,		// MR2 RTC control: bits 2 and 1 
+	0x02, 0x0e,		// MR2 RTC control: bits 2 and 1
 	0x03, 0x80,		// MR3
 	0x04, 0x30,		// MR4
 	0x05, 0x00,		// Reserved
@@ -196,7 +196,7 @@ static const unsigned char init_NTSC[] = {
 	0x16, 0x00,		// CGMS_WSS_0
 	0x17, 0x00,		// CGMS_WSS_1
 	0x18, 0x00,		// CGMS_WSS_2
-	0x19, 0x00,		// Teletext Ctl 
+	0x19, 0x00,		// Teletext Ctl
 };
 
 static const unsigned char init_PAL[] = {
@@ -381,7 +381,7 @@ static unsigned short normal_i2c[] =
 };
 
 static unsigned short ignore = I2C_CLIENT_END;
-                                                                                
+
 static struct i2c_client_address_data addr_data = {
 	.normal_i2c		= normal_i2c,
 	.probe			= &ignore,

drivers/media/video/adv7175.c

-/* 
+/*
  *  adv7175 - adv7175a video encoder driver version 0.0.3
  *
  * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
@@ -233,7 +233,7 @@ adv7175_command (struct i2c_client *client,
 				    sizeof(init_common));
 		adv7175_write(client, 0x07, TR0MODE | TR0RST);
 		adv7175_write(client, 0x07, TR0MODE);
-	        break;
+		break;
 
 	case ENCODER_GET_CAPABILITIES:
 	{
@@ -399,7 +399,7 @@ static unsigned short normal_i2c[] =
 };
 
 static unsigned short ignore = I2C_CLIENT_END;
-                                                                                
+
 static struct i2c_client_address_data addr_data = {
 	.normal_i2c		= normal_i2c,
 	.probe			= &ignore,

drivers/media/video/arv.c

@@ -161,39 +161,39 @@ void iic(int n, unsigned long addr, unsigned long data1, unsigned long data2,
 {
 	int i;
 
-  	/* Slave Address */
-  	ar_outl(addr, PLDI2CDATA);
+	/* Slave Address */
+	ar_outl(addr, PLDI2CDATA);
 	wait_for_vsync();
 
-  	/* Start */
-  	ar_outl(1, PLDI2CCND);
+	/* Start */
+	ar_outl(1, PLDI2CCND);
 	wait_acknowledge();
 
 	/* Transfer data 1 */
-  	ar_outl(data1, PLDI2CDATA);
+	ar_outl(data1, PLDI2CDATA);
 	wait_for_vsync();
-  	ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN);
+	ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN);
 	wait_acknowledge();
 
 	/* Transfer data 2 */
-  	ar_outl(data2, PLDI2CDATA);
+	ar_outl(data2, PLDI2CDATA);
 	wait_for_vsync();
-  	ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN);
+	ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN);
 	wait_acknowledge();
 
 	if (n == 3) {
 		/* Transfer data 3 */
-	  	ar_outl(data3, PLDI2CDATA);
+		ar_outl(data3, PLDI2CDATA);
 		wait_for_vsync();
-	  	ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN);
+		ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN);
 		wait_acknowledge();
-  	}
+	}
 
-  	/* Stop */
+	/* Stop */
 	for (i = 0; i < 100; i++)
 		cpu_relax();
-  	ar_outl(2, PLDI2CCND);
-  	ar_outl(2, PLDI2CCND);
+	ar_outl(2, PLDI2CCND);
+	ar_outl(2, PLDI2CCND);
 
 	while (ar_inl(PLDI2CSTS) & PLDI2CSTS_BB)
 		cpu_relax();
@@ -204,24 +204,24 @@ void init_iic(void)
 {
 	DEBUG(1, "init_iic:\n");
 
-  	/*
+	/*
 	 * ICU Setting (iic)
 	 */
-  	/* I2C Setting */
-  	ar_outl(0x0, PLDI2CCR);      	/* I2CCR Disable                   */
-  	ar_outl(0x0300, PLDI2CMOD); 	/* I2CMOD ACK/8b-data/7b-addr/auto */
-  	ar_outl(0x1, PLDI2CACK);	/* I2CACK ACK                      */
+	/* I2C Setting */
+	ar_outl(0x0, PLDI2CCR);      	/* I2CCR Disable                   */
+	ar_outl(0x0300, PLDI2CMOD); 	/* I2CMOD ACK/8b-data/7b-addr/auto */
+	ar_outl(0x1, PLDI2CACK);	/* I2CACK ACK                      */
 
     	/* I2C CLK */
-   	/* 50MH-100k */
+	/* 50MH-100k */
 	if (freq == 75) {
-  		ar_outl(369, PLDI2CFREQ);	/* BCLK = 75MHz */
+		ar_outl(369, PLDI2CFREQ);	/* BCLK = 75MHz */
 	} else if (freq == 50) {
 		ar_outl(244, PLDI2CFREQ);	/* BCLK = 50MHz */
 	} else {
 		ar_outl(244, PLDI2CFREQ);	/* default: BCLK = 50MHz */
 	}
-  	ar_outl(0x1, PLDI2CCR); 	/* I2CCR Enable */
+	ar_outl(0x1, PLDI2CCR); 	/* I2CCR Enable */
 }
 
 /**************************************************************************
@@ -253,7 +253,7 @@ static inline void wait_for_vertical_sync(int exp_line)
 
 	/*
 	 * check HCOUNT because we cannot check vertical sync.
- 	 */
+	 */
 	for (; tmout >= 0; tmout--) {
 		l = ar_inl(ARVHCOUNT);
 		if (l == exp_line)
@@ -562,8 +562,8 @@ static void ar_interrupt(int irq, void *dev, struct pt_regs *regs)
 		/* operations for interlace mode */
 		if ( line_count < (AR_HEIGHT_VGA/2) ) 	/* even line */
 			line_number = (line_count << 1);
-		else 		  			/* odd line */
- 			line_number =
+		else 					/* odd line */
+			line_number =
 			(((line_count - (AR_HEIGHT_VGA/2)) << 1) + 1);
 	} else {
 		line_number = line_count;
@@ -651,7 +651,7 @@ static int ar_initialize(struct video_device *dev)
 		cr |= ARVCR1_NORMAL;
 	ar_outl(cr, ARVCR1);
 
-  	/*
+	/*
 	 * Initialize IIC so that CPU can communicate with AR LSI,
 	 * and send boot commands to AR LSI.
 	 */
@@ -846,7 +846,7 @@ static int __init ar_init(void)
 	 * so register video device as a frame grabber type.
 	 * device is named "video[0-64]".
 	 * video_register_device() initializes h/w using ar_initialize().
- 	 */
+	 */
 	if (video_register_device(ar->vdev, VFL_TYPE_GRABBER, video_nr) != 0) {
 		/* return -1, -ENFILE(full) or others */
 		printk("arv: register video (Colour AR) failed.\n");

drivers/media/video/bt819.c

-/* 
+/*
  *  bt819 - BT819A VideoStream Decoder (Rockwell Part)
  *
  * Copyright (C) 1999 Mike Bernson <mike@mlb.org>
@@ -6,7 +6,7 @@
  *
  * Modifications for LML33/DC10plus unified driver
  * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
- *  
+ *
  * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net>
  *    - moved over to linux>=2.4.x i2c protocol (9/9/2002)
  *
@@ -206,9 +206,9 @@ bt819_init (struct i2c_client *client)
 					   Bug in the bt819 stepping on my board?
 					*/
 		0x14, 0x00,	/* 0x14 Vertial Scaling lsb */
-		0x16, 0x07,	/* 0x16 Video Timing Polarity 
+		0x16, 0x07,	/* 0x16 Video Timing Polarity
 					   ACTIVE=active low
-					   FIELD: high=odd, 
+					   FIELD: high=odd,
 					   vreset=active high,
 					   hreset=active high */
 		0x18, 0x68,	/* 0x18 AGC Delay */
@@ -497,7 +497,7 @@ static unsigned short normal_i2c[] = {
 };
 
 static unsigned short ignore = I2C_CLIENT_END;
-                                                                                
+
 static struct i2c_client_address_data addr_data = {
 	.normal_i2c		= normal_i2c,
 	.probe			= &ignore,

drivers/media/video/bt856.c

-/* 
+/*
  * bt856 - BT856A Digital Video Encoder (Rockwell Part)
  *
  * Copyright (C) 1999 Mike Bernson <mike@mlb.org>
@@ -285,7 +285,7 @@ bt856_command (struct i2c_client *client,
 static unsigned short normal_i2c[] = { I2C_BT856 >> 1, I2C_CLIENT_END };
 
 static unsigned short ignore = I2C_CLIENT_END;
-                                                                                
+
 static struct i2c_client_address_data addr_data = {
 	.normal_i2c		= normal_i2c,
 	.probe			= &ignore,

drivers/media/video/bt8xx/Kconfig

+config VIDEO_BT848
+	tristate "BT848 Video For Linux"
+	depends on VIDEO_DEV && PCI && I2C
+	select I2C_ALGOBIT
+	select FW_LOADER
+	select VIDEO_BTCX
+	select VIDEO_BUF
+	select VIDEO_IR
+	select VIDEO_TUNER
+	select VIDEO_TVEEPROM
+	select VIDEO_MSP3400
+	---help---
+	  Support for BT848 based frame grabber/overlay boards. This includes
+	  the Miro, Hauppauge and STB boards. Please read the material in
+	  <file:Documentation/video4linux/bttv/> for more information.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bttv.
+
+config VIDEO_BT848_DVB
+	bool "DVB/ATSC Support for bt878 based TV cards"
+	depends on VIDEO_BT848 && DVB_CORE
+	select DVB_BT8XX
+	---help---
+	  This adds support for DVB/ATSC cards based on the BT878 chip.

drivers/media/video/bt8xx/Makefile

+#
+# Makefile for the video capture/playback device drivers.
+#
+
+bttv-objs      :=      bttv-driver.o bttv-cards.o bttv-if.o \
+		       bttv-risc.o bttv-vbi.o bttv-i2c.o bttv-gpio.o \
+		       bttv-input.o
+
+obj-$(CONFIG_VIDEO_BT848) += bttv.o
+
+EXTRA_CFLAGS += -I$(src)/..
+EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core

drivers/media/video/bt832.c → drivers/media/video/bt8xx/bt832.c

@@ -30,7 +30,6 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
-#include <media/audiochip.h>
 #include <media/v4l2-common.h>
 
 #include "bttv.h"
@@ -39,7 +38,7 @@
 MODULE_LICENSE("GPL");
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { I2C_BT832_ALT1>>1, I2C_BT832_ALT2>>1,
+static unsigned short normal_i2c[] = { I2C_ADDR_BT832_ALT1>>1, I2C_ADDR_BT832_ALT2>>1,
 				       I2C_CLIENT_END };
 I2C_CLIENT_INSMOD;
 

drivers/media/video/bttv-driver.c → drivers/media/video/bt8xx/bttv-driver.c

@@ -36,13 +36,15 @@
 #include <linux/kdev_t.h>
 #include "bttvp.h"
 #include <media/v4l2-common.h>
+#include <media/tvaudio.h>
+#include <media/msp3400.h>
 
 #include <linux/dma-mapping.h>
 
 #include <asm/io.h>
 #include <asm/byteorder.h>
 
-#include "rds.h"
+#include <media/rds.h>
 
 
 unsigned int bttv_num;			/* number of Bt848s in use */
@@ -926,45 +928,98 @@ video_mux(struct bttv *btv, unsigned int input)
 
 static char *audio_modes[] = {
 	"audio: tuner", "audio: radio", "audio: extern",
-	"audio: intern", "audio: off"
+	"audio: intern", "audio: mute"
 };
 
 static int
-audio_mux(struct bttv *btv, int mode)
+audio_mux(struct bttv *btv, int input, int mute)
 {
-	int val,mux,i2c_mux,signal;
+	int gpio_val, signal;
+	struct v4l2_control ctrl;
+	struct i2c_client *c;
 
 	gpio_inout(bttv_tvcards[btv->c.type].gpiomask,
 		   bttv_tvcards[btv->c.type].gpiomask);
 	signal = btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC;
 
-	switch (mode) {
-	case AUDIO_MUTE:
-		btv->audio |= AUDIO_MUTE;
-		break;
-	case AUDIO_UNMUTE:
-		btv->audio &= ~AUDIO_MUTE;
-		break;
-	case AUDIO_TUNER:
-	case AUDIO_RADIO:
-	case AUDIO_EXTERN:
-	case AUDIO_INTERN:
-		btv->audio &= AUDIO_MUTE;
-		btv->audio |= mode;
-	}
-	i2c_mux = mux = (btv->audio & AUDIO_MUTE) ? AUDIO_OFF : btv->audio;
-	if (btv->opt_automute && !signal && !btv->radio_user)
-		mux = AUDIO_OFF;
-
-	val = bttv_tvcards[btv->c.type].audiomux[mux];
-	gpio_bits(bttv_tvcards[btv->c.type].gpiomask,val);
+	btv->mute = mute;
+	btv->audio = input;
+
+	/* automute */
+	mute = mute || (btv->opt_automute && !signal && !btv->radio_user);
+
+	if (mute)
+		gpio_val = bttv_tvcards[btv->c.type].gpiomute;
+	else
+		gpio_val = bttv_tvcards[btv->c.type].gpiomux[input];
+
+	gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpio_val);
 	if (bttv_gpio)
-		bttv_gpio_tracking(btv,audio_modes[mux]);
-	if (!in_interrupt())
-		bttv_call_i2c_clients(btv,AUDC_SET_INPUT,&(i2c_mux));
+		bttv_gpio_tracking(btv, audio_modes[mute ? 4 : input]);
+	if (in_interrupt())
+		return 0;
+
+	ctrl.id = V4L2_CID_AUDIO_MUTE;
+	ctrl.value = btv->mute;
+	bttv_call_i2c_clients(btv, VIDIOC_S_CTRL, &ctrl);
+	c = btv->i2c_msp34xx_client;
+	if (c) {
+		struct v4l2_routing route;
+
+		/* Note: the inputs tuner/radio/extern/intern are translated
+		   to msp routings. This assumes common behavior for all msp3400
+		   based TV cards. When this assumption fails, then the
+		   specific MSP routing must be added to the card table.
+		   For now this is sufficient. */
+		switch (input) {
+		case TVAUDIO_INPUT_RADIO:
+			route.input = MSP_INPUT(MSP_IN_SCART_2, MSP_IN_TUNER_1,
+				    MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART);
+			break;
+		case TVAUDIO_INPUT_EXTERN:
+			route.input = MSP_INPUT(MSP_IN_SCART_1, MSP_IN_TUNER_1,
+				    MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART);
+			break;
+		case TVAUDIO_INPUT_INTERN:
+			/* Yes, this is the same input as for RADIO. I doubt
+			   if this is ever used. The only board with an INTERN
+			   input is the BTTV_BOARD_AVERMEDIA98. I wonder how
+			   that was tested. My guess is that the whole INTERN
+			   input does not work. */
+			route.input = MSP_INPUT(MSP_IN_SCART_2, MSP_IN_TUNER_1,
+				    MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART);
+			break;
+		case TVAUDIO_INPUT_TUNER:
+		default:
+			route.input = MSP_INPUT_DEFAULT;
+			break;
+		}
+		route.output = MSP_OUTPUT_DEFAULT;
+		c->driver->command(c, VIDIOC_INT_S_AUDIO_ROUTING, &route);
+	}
+	c = btv->i2c_tvaudio_client;
+	if (c) {
+		struct v4l2_routing route;
+
+		route.input = input;
+		route.output = 0;
+		c->driver->command(c, VIDIOC_INT_S_AUDIO_ROUTING, &route);
+	}
 	return 0;
 }
 
+static inline int
+audio_mute(struct bttv *btv, int mute)
+{
+	return audio_mux(btv, btv->audio, mute);
+}
+
+static inline int
+audio_input(struct bttv *btv, int input)
+{
+	return audio_mux(btv, input, btv->mute);
+}
+
 static void
 i2c_vidiocschan(struct bttv *btv)
 {
@@ -1023,8 +1078,8 @@ set_input(struct bttv *btv, unsigned int input)
 	} else {
 		video_mux(btv,input);
 	}
-	audio_mux(btv,(input == bttv_tvcards[btv->c.type].tuner ?
-		       AUDIO_TUNER : AUDIO_EXTERN));
+	audio_input(btv,(input == bttv_tvcards[btv->c.type].tuner ?
+		       TVAUDIO_INPUT_TUNER : TVAUDIO_INPUT_EXTERN));
 	set_tvnorm(btv,btv->tvnorm);
 	i2c_vidiocschan(btv);
 }
@@ -1236,10 +1291,10 @@ static int set_control(struct bttv *btv, struct v4l2_control *c)
 	case V4L2_CID_AUDIO_MUTE:
 		if (c->value) {
 			va.flags |= VIDEO_AUDIO_MUTE;
-			audio_mux(btv, AUDIO_MUTE);
+			audio_mute(btv, 1);
 		} else {
 			va.flags &= ~VIDEO_AUDIO_MUTE;
-			audio_mux(btv, AUDIO_UNMUTE);
+			audio_mute(btv, 0);
 		}
 		break;
 
@@ -1397,7 +1452,7 @@ bttv_switch_overlay(struct bttv *btv, struct bttv_fh *fh,
 		free_btres(btv,fh,RESOURCE_OVERLAY);
 	if (NULL != old) {
 		dprintk("switch_overlay: old=%p state is %d\n",old,old->vb.state);
-		bttv_dma_free(btv, old);
+		bttv_dma_free(&fh->cap,btv, old);
 		kfree(old);
 	}
 	dprintk("switch_overlay: done\n");
@@ -1407,7 +1462,8 @@ bttv_switch_overlay(struct bttv *btv, struct bttv_fh *fh,
 /* ----------------------------------------------------------------------- */
 /* video4linux (1) interface                                               */
 
-static int bttv_prepare_buffer(struct bttv *btv, struct bttv_buffer *buf,
+static int bttv_prepare_buffer(struct videobuf_queue *q,struct bttv *btv,
+			       struct bttv_buffer *buf,
 			       const struct bttv_format *fmt,
 			       unsigned int width, unsigned int height,
 			       enum v4l2_field field)
@@ -1450,7 +1506,7 @@ static int bttv_prepare_buffer(struct bttv *btv, struct bttv_buffer *buf,
 	/* alloc risc memory */
 	if (STATE_NEEDS_INIT == buf->vb.state) {
 		redo_dma_risc = 1;
-		if (0 != (rc = videobuf_iolock(btv->c.pci,&buf->vb,&btv->fbuf)))
+		if (0 != (rc = videobuf_iolock(q,&buf->vb,&btv->fbuf)))
 			goto fail;
 	}
 
@@ -1462,7 +1518,7 @@ static int bttv_prepare_buffer(struct bttv *btv, struct bttv_buffer *buf,
 	return 0;
 
  fail:
-	bttv_dma_free(btv,buf);
+	bttv_dma_free(q,btv,buf);
 	return rc;
 }
 
@@ -1486,7 +1542,7 @@ buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 	struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb);
 	struct bttv_fh *fh = q->priv_data;
 
-	return bttv_prepare_buffer(fh->btv, buf, fh->fmt,
+	return bttv_prepare_buffer(q,fh->btv, buf, fh->fmt,
 				   fh->width, fh->height, field);
 }
 
@@ -1510,7 +1566,7 @@ static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
 	struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb);
 	struct bttv_fh *fh = q->priv_data;
 
-	bttv_dma_free(fh->btv,buf);
+	bttv_dma_free(&fh->cap,fh->btv,buf);
 }
 
 static struct videobuf_queue_ops bttv_video_qops = {
@@ -1653,7 +1709,7 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)
 			return -EINVAL;
 
 		mutex_lock(&btv->lock);
-		audio_mux(btv, (v->flags&VIDEO_AUDIO_MUTE) ? AUDIO_MUTE : AUDIO_UNMUTE);
+		audio_mute(btv, (v->flags&VIDEO_AUDIO_MUTE) ? 1 : 0);
 		bttv_call_i2c_clients(btv,cmd,v);
 
 		/* card specific hooks */
@@ -1822,7 +1878,8 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)
 			bttv_call_i2c_clients(btv, VIDIOCGAUDIO, &va);
 			if (t->audmode == V4L2_TUNER_MODE_MONO)
 				va.mode = VIDEO_SOUND_MONO;
-			else if (t->audmode == V4L2_TUNER_MODE_STEREO)
+			else if (t->audmode == V4L2_TUNER_MODE_STEREO ||
+				 t->audmode == V4L2_TUNER_MODE_LANG1_LANG2)
 				va.mode = VIDEO_SOUND_STEREO;
 			else if (t->audmode == V4L2_TUNER_MODE_LANG1)
 				va.mode = VIDEO_SOUND_LANG1;
@@ -2496,7 +2553,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file,
 		field = (vm->height > bttv_tvnorms[btv->tvnorm].sheight/2)
 			? V4L2_FIELD_INTERLACED
 			: V4L2_FIELD_BOTTOM;
-		retval = bttv_prepare_buffer(btv,buf,
+		retval = bttv_prepare_buffer(&fh->cap,btv,buf,
 					     format_by_palette(vm->format),
 					     vm->width,vm->height,field);
 		if (0 != retval)
@@ -2528,8 +2585,8 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file,
 			retval = -EIO;
 			/* fall through */
 		case STATE_DONE:
-			videobuf_dma_pci_sync(btv->c.pci,&buf->vb.dma);
-			bttv_dma_free(btv,buf);
+			videobuf_dma_sync(&fh->cap,&buf->vb.dma);
+			bttv_dma_free(&fh->cap,btv,buf);
 			break;
 		default:
 			retval = -EINVAL;
@@ -3162,8 +3219,8 @@ static int radio_open(struct inode *inode, struct file *file)
 
 	file->private_data = btv;
 
-	bttv_call_i2c_clients(btv,AUDC_SET_RADIO,&btv->tuner_type);
-	audio_mux(btv,AUDIO_RADIO);
+	bttv_call_i2c_clients(btv,AUDC_SET_RADIO,NULL);
+	audio_input(btv,TVAUDIO_INPUT_RADIO);
 
 	mutex_unlock(&btv->lock);
 	return 0;
@@ -3749,7 +3806,7 @@ static irqreturn_t bttv_irq(int irq, void *dev_id, struct pt_regs * regs)
 			bttv_irq_switch_video(btv);
 
 		if ((astat & BT848_INT_HLOCK)  &&  btv->opt_automute)
-			audio_mux(btv, -1);
+			audio_mute(btv, btv->mute);  /* trigger automute */
 
 		if (astat & (BT848_INT_SCERR|BT848_INT_OCERR)) {
 			printk(KERN_INFO "bttv%d: %s%s @ %08x,",btv->c.nr,
@@ -4050,7 +4107,7 @@ static int __devinit bttv_probe(struct pci_dev *dev,
 		bt848_contrast(btv,32768);
 		bt848_hue(btv,32768);
 		bt848_sat(btv,32768);
-		audio_mux(btv,AUDIO_MUTE);
+		audio_mute(btv, 1);
 		set_input(btv,0);
 	}
 

drivers/media/video/bttv-i2c.c → drivers/media/video/bt8xx/bttv-i2c.c

@@ -302,6 +302,10 @@ static int attach_inform(struct i2c_client *client)
 	if (!client->driver->command)
 		return 0;
 
+	if (client->driver->id == I2C_DRIVERID_MSP3400)
+		btv->i2c_msp34xx_client = client;
+	if (client->driver->id == I2C_DRIVERID_TVAUDIO)
+		btv->i2c_tvaudio_client = client;
 	if (btv->tuner_type != UNSET) {
 		struct tuner_setup tun_setup;
 

drivers/media/video/bttv-risc.c → drivers/media/video/bt8xx/bttv-risc.c

@@ -509,11 +509,11 @@ bttv_risc_hook(struct bttv *btv, int slot, struct btcx_riscmem *risc,
 }
 
 void
-bttv_dma_free(struct bttv *btv, struct bttv_buffer *buf)
+bttv_dma_free(struct videobuf_queue *q,struct bttv *btv, struct bttv_buffer *buf)
 {
 	BUG_ON(in_interrupt());
 	videobuf_waiton(&buf->vb,0,0);
-	videobuf_dma_pci_unmap(btv->c.pci, &buf->vb.dma);
+	videobuf_dma_unmap(q, &buf->vb.dma);
 	videobuf_dma_free(&buf->vb.dma);
 	btcx_riscmem_free(btv->c.pci,&buf->bottom);
 	btcx_riscmem_free(btv->c.pci,&buf->top);

drivers/media/video/bttv-vbi.c → drivers/media/video/bt8xx/bttv-vbi.c

@@ -96,7 +96,7 @@ static int vbi_buffer_prepare(struct videobuf_queue *q,
 		return -EINVAL;
 
 	if (STATE_NEEDS_INIT == buf->vb.state) {
-		if (0 != (rc = videobuf_iolock(btv->c.pci, &buf->vb, NULL)))
+		if (0 != (rc = videobuf_iolock(q, &buf->vb, NULL)))
 			goto fail;
 		if (0 != (rc = vbi_buffer_risc(btv,buf,fh->lines)))
 			goto fail;
@@ -109,7 +109,7 @@ static int vbi_buffer_prepare(struct videobuf_queue *q,
 	return 0;
 
  fail:
-	bttv_dma_free(btv,buf);
+	bttv_dma_free(q,btv,buf);
 	return rc;
 }
 
@@ -136,7 +136,7 @@ static void vbi_buffer_release(struct videobuf_queue *q, struct videobuf_buffer
 	struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb);
 
 	dprintk("free %p\n",vb);
-	bttv_dma_free(fh->btv,buf);
+	bttv_dma_free(&fh->cap,fh->btv,buf);
 }
 
 struct videobuf_queue_ops bttv_vbi_qops = {

drivers/media/video/bttv.h → drivers/media/video/bt8xx/bttv.h

@@ -18,6 +18,7 @@
 #include <linux/i2c.h>
 #include <media/ir-common.h>
 #include <media/ir-kbd-i2c.h>
+#include <media/i2c-addr.h>
 
 /* ---------------------------------------------------------- */
 /* exported by bttv-cards.c                                   */
@@ -168,25 +169,6 @@
 #define BTTV_BOARD_HAUPPAUGE_IMPACTVCB     0x8f
 #define BTTV_BOARD_MACHTV_MAGICTV          0x90
 
-/* i2c address list */
-#define I2C_TSA5522        0xc2
-#define I2C_TDA7432        0x8a
-#define I2C_BT832_ALT1	   0x88
-#define I2C_BT832_ALT2	   0x8a // alternate setting
-#define I2C_TDA8425        0x82
-#define I2C_TDA9840        0x84
-#define I2C_TDA9850        0xb6 /* also used by 9855,9873 */
-#define I2C_TDA9874        0xb0 /* also used by 9875 */
-#define I2C_TDA9875        0xb0
-#define I2C_HAUPEE         0xa0
-#define I2C_STBEE          0xae
-#define I2C_VHX            0xc0
-#define I2C_MSP3400        0x80
-#define I2C_MSP3400_ALT    0x88
-#define I2C_TEA6300        0x80 /* also used by 6320 */
-#define I2C_DPL3518	   0x84
-#define I2C_TDA9887	   0x86
-
 /* more card-specific defines */
 #define PT2254_L_CHANNEL 0x10
 #define PT2254_R_CHANNEL 0x08
@@ -252,7 +234,8 @@ struct tvcard
 	unsigned int digital_mode; // DIGITAL_MODE_CAMERA or DIGITAL_MODE_VIDEO
 	u32 gpiomask;
 	u32 muxsel[16];
-	u32 audiomux[6]; /* Tuner, Radio, external, internal, mute, stereo */
+	u32 gpiomux[4];  /* Tuner, Radio, external, internal */
+	u32 gpiomute;    /* GPIO mute setting */
 	u32 gpiomask2;   /* GPIO MUX mask */
 
 	/* i2c audio flags */

drivers/media/video/bttvp.h → drivers/media/video/bt8xx/bttvp.h

@@ -41,7 +41,6 @@
 
 #include <linux/device.h>
 #include <media/video-buf.h>
-#include <media/audiochip.h>
 #include <media/tuner.h>
 #include <media/tveeprom.h>
 #include <media/ir-common.h>
@@ -190,7 +189,8 @@ int bttv_buffer_activate_video(struct bttv *btv,
 			       struct bttv_buffer_set *set);
 int bttv_buffer_activate_vbi(struct bttv *btv,
 			     struct bttv_buffer *vbi);
-void bttv_dma_free(struct bttv *btv, struct bttv_buffer *buf);
+void bttv_dma_free(struct videobuf_queue *q, struct bttv *btv,
+		   struct bttv_buffer *buf);
 
 /* overlay handling */
 int bttv_overlay_risc(struct bttv *btv, struct bttv_overlay *ov,
@@ -298,6 +298,8 @@ struct bttv {
 	int                        i2c_state, i2c_rc;
 	int                        i2c_done;
 	wait_queue_head_t          i2c_queue;
+	struct i2c_client 	  *i2c_msp34xx_client;
+	struct i2c_client 	  *i2c_tvaudio_client;
 
 	/* video4linux (1) */
 	struct video_device *video_dev;
@@ -320,6 +322,7 @@ struct bttv {
 	/* video state */
 	unsigned int input;
 	unsigned int audio;
+	unsigned int mute;
 	unsigned long freq;
 	int tvnorm,hue,contrast,bright,saturation;
 	struct v4l2_framebuffer fbuf;

drivers/media/video/bw-qcam.c

@@ -150,7 +150,7 @@ static int qc_calibrate(struct qcam_device *q)
 static struct qcam_device *qcam_init(struct parport *port)
 {
 	struct qcam_device *q;
-	
+
 	q = kmalloc(sizeof(struct qcam_device), GFP_KERNEL);
 	if(q==NULL)
 		return NULL;
@@ -158,16 +158,16 @@ static struct qcam_device *qcam_init(struct parport *port)
 	q->pport = port;
 	q->pdev = parport_register_device(port, "bw-qcam", NULL, NULL,
 					  NULL, 0, NULL);
-	if (q->pdev == NULL) 
+	if (q->pdev == NULL)
 	{
 		printk(KERN_ERR "bw-qcam: couldn't register for %s.\n",
 		       port->name);
 		kfree(q);
 		return NULL;
 	}
-	
+
 	memcpy(&q->vdev, &qcam_template, sizeof(qcam_template));
-	
+
 	mutex_init(&q->lock);
 
 	q->port_mode = (QC_ANY | QC_NOTSET);
@@ -236,12 +236,12 @@ static int qc_waithand(struct qcam_device *q, int val)
 		while (!((status = read_lpstatus(q)) & 8))
 		{
 			/* 1000 is enough spins on the I/O for all normal
-			   cases, at that point we start to poll slowly 
+			   cases, at that point we start to poll slowly
 			   until the camera wakes up. However, we are
 			   busy blocked until the camera responds, so
 			   setting it lower is much better for interactive
 			   response. */
-			   
+
 			if(runs++>maxpoll)
 			{
 				msleep_interruptible(5);
@@ -255,12 +255,12 @@ static int qc_waithand(struct qcam_device *q, int val)
 		while (((status = read_lpstatus(q)) & 8))
 		{
 			/* 1000 is enough spins on the I/O for all normal
-			   cases, at that point we start to poll slowly 
+			   cases, at that point we start to poll slowly
 			   until the camera wakes up. However, we are
 			   busy blocked until the camera responds, so
 			   setting it lower is much better for interactive
 			   response. */
-			   
+
 			if(runs++>maxpoll)
 			{
 				msleep_interruptible(5);
@@ -282,17 +282,17 @@ static unsigned int qc_waithand2(struct qcam_device *q, int val)
 {
 	unsigned int status;
 	int runs=0;
-	
-	do 
+
+	do
 	{
 		status = read_lpdata(q);
 		/* 1000 is enough spins on the I/O for all normal
-		   cases, at that point we start to poll slowly 
+		   cases, at that point we start to poll slowly
 		   until the camera wakes up. However, we are
 		   busy blocked until the camera responds, so
 		   setting it lower is much better for interactive
 		   response. */
-		   
+
 		if(runs++>maxpoll)
 		{
 			msleep_interruptible(5);
@@ -321,7 +321,7 @@ static int qc_detect(struct qcam_device *q)
 
 	lastreg = reg = read_lpstatus(q) & 0xf0;
 
-	for (i = 0; i < 500; i++) 
+	for (i = 0; i < 500; i++)
 	{
 		reg = read_lpstatus(q) & 0xf0;
 		if (reg != lastreg)
@@ -357,7 +357,7 @@ static int qc_detect(struct qcam_device *q)
 
 static void qc_reset(struct qcam_device *q)
 {
-	switch (q->port_mode & QC_FORCE_MASK) 
+	switch (q->port_mode & QC_FORCE_MASK)
 	{
 		case QC_FORCE_UNIDIR:
 			q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR;
@@ -370,7 +370,7 @@ static void qc_reset(struct qcam_device *q)
 		case QC_ANY:
 			write_lpcontrol(q, 0x20);
 			write_lpdata(q, 0x75);
-	
+
 			if (read_lpdata(q) != 0x75) {
 				q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR;
 			} else {
@@ -398,8 +398,8 @@ static void qc_reset(struct qcam_device *q)
 static int qc_setscanmode(struct qcam_device *q)
 {
 	int old_mode = q->mode;
-	
-	switch (q->transfer_scale) 
+
+	switch (q->transfer_scale)
 	{
 		case 1:
 			q->mode = 0;
@@ -412,7 +412,7 @@ static int qc_setscanmode(struct qcam_device *q)
 			break;
 	}
 
-	switch (q->bpp) 
+	switch (q->bpp)
 	{
 		case 4:
 			break;
@@ -421,7 +421,7 @@ static int qc_setscanmode(struct qcam_device *q)
 			break;
 	}
 
-	switch (q->port_mode & QC_MODE_MASK) 
+	switch (q->port_mode & QC_MODE_MASK)
 	{
 		case QC_BIDIR:
 			q->mode += 1;
@@ -430,10 +430,10 @@ static int qc_setscanmode(struct qcam_device *q)
 		case QC_UNIDIR:
 			break;
 	}
-	
+
 	if (q->mode != old_mode)
 		q->status |= QC_PARAM_CHANGE;
-	
+
 	return 0;
 }
 
@@ -451,7 +451,7 @@ static void qc_set(struct qcam_device *q)
 	/* Set the brightness.  Yes, this is repetitive, but it works.
 	 * Shorter versions seem to fail subtly.  Feel free to try :-). */
 	/* I think the problem was in qc_command, not here -- bls */
-	
+
 	qc_command(q, 0xb);
 	qc_command(q, q->brightness);
 
@@ -502,13 +502,13 @@ static inline int qc_readbytes(struct qcam_device *q, char buffer[])
 	unsigned int hi2, lo2;
 	static int state = 0;
 
-	if (buffer == NULL) 
+	if (buffer == NULL)
 	{
 		state = 0;
 		return 0;
 	}
-	
-	switch (q->port_mode & QC_MODE_MASK) 
+
+	switch (q->port_mode & QC_MODE_MASK)
 	{
 		case QC_BIDIR:		/* Bi-directional Port */
 			write_lpcontrol(q, 0x26);
@@ -517,7 +517,7 @@ static inline int qc_readbytes(struct qcam_device *q, char buffer[])
 			write_lpcontrol(q, 0x2e);
 			lo2 = (qc_waithand2(q, 0) >> 1);
 			hi2 = (read_lpstatus(q) >> 3) & 0x1f;
-			switch (q->bpp) 
+			switch (q->bpp)
 			{
 				case 4:
 					buffer[0] = lo & 0xf;
@@ -544,7 +544,7 @@ static inline int qc_readbytes(struct qcam_device *q, char buffer[])
 			write_lpcontrol(q, 0xe);
 			hi = (qc_waithand(q, 0) & 0xf0) >> 4;
 
-			switch (q->bpp) 
+			switch (q->bpp)
 			{
 				case 4:
 					buffer[0] = lo;
@@ -552,7 +552,7 @@ static inline int qc_readbytes(struct qcam_device *q, char buffer[])
 					ret = 2;
 					break;
 				case 6:
-					switch (state) 
+					switch (state)
 					{
 						case 0:
 							buffer[0] = (lo << 2) | ((hi & 0xc) >> 2);
@@ -604,13 +604,13 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l
 	int  shift=8-q->bpp;
 	char invert;
 
-	if (q->mode == -1) 
+	if (q->mode == -1)
 		return -ENXIO;
 
 	qc_command(q, 0x7);
 	qc_command(q, q->mode);
 
-	if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR) 
+	if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR)
 	{
 		write_lpcontrol(q, 0x2e);	/* turn port around */
 		write_lpcontrol(q, 0x26);
@@ -618,7 +618,7 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l
 		write_lpcontrol(q, 0x2e);
 		(void) qc_waithand(q, 0);
 	}
-	
+
 	/* strange -- should be 15:63 below, but 4bpp is odd */
 	invert = (q->bpp == 4) ? 16 : 63;
 
@@ -629,15 +629,15 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l
 	    q->transfer_scale;
 	transperline = (transperline + divisor - 1) / divisor;
 
-	for (i = 0, yield = yieldlines; i < linestotrans; i++) 
+	for (i = 0, yield = yieldlines; i < linestotrans; i++)
 	{
-		for (pixels_read = j = 0; j < transperline; j++) 
+		for (pixels_read = j = 0; j < transperline; j++)
 		{
 			bytes = qc_readbytes(q, buffer);
-			for (k = 0; k < bytes && (pixels_read + k) < pixels_per_line; k++) 
+			for (k = 0; k < bytes && (pixels_read + k) < pixels_per_line; k++)
 			{
 				int o;
-				if (buffer[k] == 0 && invert == 16) 
+				if (buffer[k] == 0 && invert == 16)
 				{
 					/* 4bpp is odd (again) -- inverter is 16, not 15, but output
 					   must be 0-15 -- bls */
@@ -653,7 +653,7 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l
 			pixels_read += bytes;
 		}
 		(void) qc_readbytes(q, NULL);	/* reset state machine */
-		
+
 		/* Grabbing an entire frame from the quickcam is a lengthy
 		   process. We don't (usually) want to busy-block the
 		   processor for the entire frame. yieldlines is a module
@@ -666,7 +666,7 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l
 		}
 	}
 
-	if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR) 
+	if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR)
 	{
 		write_lpcontrol(q, 2);
 		write_lpcontrol(q, 6);
@@ -687,7 +687,7 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file,
 {
 	struct video_device *dev = video_devdata(file);
 	struct qcam_device *qcam=(struct qcam_device *)dev;
-	
+
 	switch(cmd)
 	{
 		case VIDIOCGCAP:
@@ -762,7 +762,7 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file,
 			    	return -EINVAL;
 			if(p->depth!=4 && p->depth!=6)
 				return -EINVAL;
-			
+
 			/*
 			 *	Now load the camera.
 			 */
@@ -790,11 +790,11 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file,
 				return -EINVAL;
 			if(vw->width<80||vw->width>320)
 				return -EINVAL;
-				
+
 			qcam->width = 320;
 			qcam->height = 240;
 			qcam->transfer_scale = 4;
-			
+
 			if(vw->width>=160 && vw->height>=120)
 			{
 				qcam->transfer_scale = 2;
@@ -808,11 +808,11 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file,
 			mutex_lock(&qcam->lock);
 			qc_setscanmode(qcam);
 			mutex_unlock(&qcam->lock);
-			
+
 			/* We must update the camera before we grab. We could
 			   just have changed the grab size */
 			qcam->status |= QC_PARAM_CHANGE;
-			
+
 			/* Ok we figured out what to use from our wide choice */
 			return 0;
 		}
@@ -853,9 +853,9 @@ static ssize_t qcam_read(struct file *file, char __user *buf,
 	struct qcam_device *qcam=(struct qcam_device *)v;
 	int len;
 	parport_claim_or_block(qcam->pdev);
-	
+
 	mutex_lock(&qcam->lock);
-	
+
 	qc_reset(qcam);
 
 	/* Update the camera parameters if we need to */
@@ -863,13 +863,13 @@ static ssize_t qcam_read(struct file *file, char __user *buf,
 		qc_set(qcam);
 
 	len=qc_capture(qcam, buf,count);
-	
+
 	mutex_unlock(&qcam->lock);
-	
+
 	parport_release(qcam->pdev);
 	return len;
 }
- 
+
 static struct file_operations qcam_fops = {
 	.owner		= THIS_MODULE,
 	.open           = video_exclusive_open,
@@ -905,11 +905,11 @@ static int init_bwqcam(struct parport *port)
 	qcam=qcam_init(port);
 	if(qcam==NULL)
 		return -ENODEV;
-		
+
 	parport_claim_or_block(qcam->pdev);
 
 	qc_reset(qcam);
-	
+
 	if(qc_detect(qcam)==0)
 	{
 		parport_release(qcam->pdev);
@@ -920,9 +920,9 @@ static int init_bwqcam(struct parport *port)
 	qc_calibrate(qcam);
 
 	parport_release(qcam->pdev);
-	
+
 	printk(KERN_INFO "Connectix Quickcam on %s\n", qcam->pport->name);
-	
+
 	if(video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1)
 	{
 		parport_unregister_device(qcam->pdev);
@@ -1013,7 +1013,7 @@ static int __init init_bw_qcams(void)
 		printk("Connectix Quickcam max-poll was above 5000. Using 5000.\n");
 		maxpoll = 5000;
 	}
-	
+
 	if (yieldlines < 1) {
 		printk("Connectix Quickcam yieldlines was less than 1. Using 1.\n");
 		yieldlines = 1;

drivers/media/video/c-qcam.c

@@ -16,7 +16,7 @@
  *
  * The parport parameter controls which parports will be scanned.
  * Scanning all parports causes some printers to print a garbage page.
- *       -- March 14, 1999  Billy Donahue <billy@escape.com> 
+ *       -- March 14, 1999  Billy Donahue <billy@escape.com>
  *
  * Fixed data format to BGR, added force_rgb parameter. Added missing
  * parport_unregister_driver() on module removal.
@@ -88,7 +88,7 @@ static inline unsigned int qcam_ready2(struct qcam_device *qcam)
 	return (parport_read_data(qcam->pport) & 0x1)?1:0;
 }
 
-static unsigned int qcam_await_ready1(struct qcam_device *qcam, 
+static unsigned int qcam_await_ready1(struct qcam_device *qcam,
 					     int value)
 {
 	unsigned long oldjiffies = jiffies;
@@ -98,7 +98,7 @@ static unsigned int qcam_await_ready1(struct qcam_device *qcam,
 		if (qcam_ready1(qcam) == value)
 			return 0;
 
-	/* If the camera didn't respond within 1/25 second, poll slowly 
+	/* If the camera didn't respond within 1/25 second, poll slowly
 	   for a while. */
 	for (i = 0; i < 50; i++)
 	{
@@ -123,7 +123,7 @@ static unsigned int qcam_await_ready2(struct qcam_device *qcam, int value)
 		if (qcam_ready2(qcam) == value)
 			return 0;
 
-	/* If the camera didn't respond within 1/25 second, poll slowly 
+	/* If the camera didn't respond within 1/25 second, poll slowly
 	   for a while. */
 	for (i = 0; i < 50; i++)
 	{
@@ -157,12 +157,12 @@ static int qcam_write_data(struct qcam_device *qcam, unsigned int data)
 	unsigned int idata;
 	parport_write_data(qcam->pport, data);
 	idata = qcam_read_data(qcam);
-	if (data != idata) 
+	if (data != idata)
 	{
-		printk(KERN_WARNING "cqcam: sent %x but received %x\n", data, 
+		printk(KERN_WARNING "cqcam: sent %x but received %x\n", data,
 		       idata);
 		return 1;
-	} 
+	}
 	return 0;
 }
 
@@ -193,12 +193,12 @@ static int qc_detect(struct qcam_device *qcam)
 	   no device was found".  Fix this one day. */
 	if (qcam->pport->probe_info[0].class == PARPORT_CLASS_MEDIA
 	    && qcam->pport->probe_info[0].model
-	    && !strcmp(qcam->pdev->port->probe_info[0].model, 
+	    && !strcmp(qcam->pdev->port->probe_info[0].model,
 		       "Color QuickCam 2.0")) {
 		printk(KERN_DEBUG "QuickCam: Found by IEEE1284 probe.\n");
 		return 1;
 	}
-	
+
 	if (probe < 2)
 		return 0;
 
@@ -206,11 +206,11 @@ static int qc_detect(struct qcam_device *qcam)
 
 	/* look for a heartbeat */
 	ostat = stat = parport_read_status(qcam->pport);
-	for (i=0; i<250; i++) 
+	for (i=0; i<250; i++)
 	{
 		mdelay(1);
 		stat = parport_read_status(qcam->pport);
-		if (ostat != stat) 
+		if (ostat != stat)
 		{
 			if (++count >= 3) return 1;
 			ostat = stat;
@@ -226,11 +226,11 @@ static int qc_detect(struct qcam_device *qcam)
 	count = 0;
 
 	ostat = stat = parport_read_status(qcam->pport);
-	for (i=0; i<250; i++) 
+	for (i=0; i<250; i++)
 	{
 		mdelay(1);
 		stat = parport_read_status(qcam->pport);
-		if (ostat != stat) 
+		if (ostat != stat)
 		{
 			if (++count >= 3) return 1;
 			ostat = stat;
@@ -247,7 +247,7 @@ static void qc_reset(struct qcam_device *qcam)
 	parport_write_control(qcam->pport, 0x8);
 	mdelay(1);
 	parport_write_control(qcam->pport, 0xc);
-	mdelay(1);          
+	mdelay(1);
 }
 
 /* Reset the QuickCam and program for brightness, contrast,
@@ -258,7 +258,7 @@ static void qc_setup(struct qcam_device *q)
 	qc_reset(q);
 
 	/* Set the brightness.  */
-       	qcam_set(q, 11, q->brightness);
+	qcam_set(q, 11, q->brightness);
 
 	/* Set the height and width.  These refer to the actual
 	   CCD area *before* applying the selected decimation.  */
@@ -272,12 +272,12 @@ static void qc_setup(struct qcam_device *q)
 	/* Set contrast and white balance.  */
 	qcam_set(q, 0x19, q->contrast);
 	qcam_set(q, 0x1f, q->whitebal);
-	
+
 	/* Set the speed.  */
 	qcam_set(q, 45, 2);
 }
 
-/* Read some bytes from the camera and put them in the buffer. 
+/* Read some bytes from the camera and put them in the buffer.
    nbytes should be a multiple of 3, because bidirectional mode gives
    us three bytes at a time.  */
 
@@ -383,7 +383,7 @@ static long qc_capture(struct qcam_device *q, char __user *buf, unsigned long le
 
 	if (qcam_set(q, 7, (q->mode | (is_bi_dir?1:0)) + 1))
 		return -EIO;
-	
+
 	lines = q->height;
 	pixelsperline = q->width;
 	bitsperxfer = (is_bi_dir) ? 24 : 8;
@@ -499,7 +499,7 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file,
 {
 	struct video_device *dev = video_devdata(file);
 	struct qcam_device *qcam=(struct qcam_device *)dev;
-	
+
 	switch(cmd)
 	{
 		case VIDIOCGCAP:
@@ -574,7 +574,7 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file,
 			 */
 			if (p->depth != 24 || p->palette != VIDEO_PALETTE_RGB24)
 				return -EINVAL;
-			
+
 			/*
 			 *	Now load the camera.
 			 */
@@ -584,7 +584,7 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file,
 
 			mutex_lock(&qcam->lock);
 			parport_claim_or_block(qcam->pdev);
-			qc_setup(qcam); 
+			qc_setup(qcam);
 			parport_release(qcam->pdev);
 			mutex_unlock(&qcam->lock);
 			return 0;
@@ -601,11 +601,11 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file,
 				return -EINVAL;
 			if(vw->width<80||vw->width>320)
 				return -EINVAL;
-				
+
 			qcam->width = 80;
 			qcam->height = 60;
 			qcam->mode = QC_DECIMATION_4;
-			
+
 			if(vw->width>=160 && vw->height>=120)
 			{
 				qcam->width = 160;
@@ -627,7 +627,7 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file,
 				qcam->mode = QC_BILLIONS | QC_DECIMATION_1;
 			}
 #endif
-			/* Ok we figured out what to use from our 
+			/* Ok we figured out what to use from our
 			   wide choice */
 			mutex_lock(&qcam->lock);
 			parport_claim_or_block(qcam->pdev);
@@ -676,7 +676,7 @@ static ssize_t qcam_read(struct file *file, char __user *buf,
 	mutex_lock(&qcam->lock);
 	parport_claim_or_block(qcam->pdev);
 	/* Probably should have a semaphore against multiple users */
-	len = qc_capture(qcam, buf,count); 
+	len = qc_capture(qcam, buf,count);
 	parport_release(qcam->pdev);
 	mutex_unlock(&qcam->lock);
 	return len;
@@ -707,7 +707,7 @@ static struct video_device qcam_template=
 static struct qcam_device *qcam_init(struct parport *port)
 {
 	struct qcam_device *q;
-	
+
 	q = kmalloc(sizeof(struct qcam_device), GFP_KERNEL);
 	if(q==NULL)
 		return NULL;
@@ -718,14 +718,14 @@ static struct qcam_device *qcam_init(struct parport *port)
 
 	q->bidirectional = (q->pport->modes & PARPORT_MODE_TRISTATE)?1:0;
 
-	if (q->pdev == NULL) 
+	if (q->pdev == NULL)
 	{
 		printk(KERN_ERR "c-qcam: couldn't register for %s.\n",
 		       port->name);
 		kfree(q);
 		return NULL;
 	}
-	
+
 	memcpy(&q->vdev, &qcam_template, sizeof(qcam_template));
 
 	mutex_init(&q->lock);
@@ -766,11 +766,11 @@ static int init_cqcam(struct parport *port)
 	qcam = qcam_init(port);
 	if (qcam==NULL)
 		return -ENODEV;
-		
+
 	parport_claim_or_block(qcam->pdev);
 
 	qc_reset(qcam);
-	
+
 	if (probe && qc_detect(qcam)==0)
 	{
 		parport_release(qcam->pdev);
@@ -782,7 +782,7 @@ static int init_cqcam(struct parport *port)
 	qc_setup(qcam);
 
 	parport_release(qcam->pdev);
-	
+
 	if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1)
 	{
 		printk(KERN_ERR "Unable to register Colour QuickCam on %s\n",
@@ -792,9 +792,9 @@ static int init_cqcam(struct parport *port)
 		return -ENODEV;
 	}
 
-	printk(KERN_INFO "video%d: Colour QuickCam found on %s\n", 
+	printk(KERN_INFO "video%d: Colour QuickCam found on %s\n",
 	       qcam->vdev.minor, qcam->pport->name);
-	
+
 	qcams[num_cams++] = qcam;
 
 	return 0;

drivers/media/video/cpia2/cpia2.h

@@ -381,7 +381,7 @@ struct cpia2_fh {
 
 struct camera_data {
 	/* locks */
-	struct semaphore busy_lock;	/* guard against SMP multithreading */
+	struct mutex busy_lock;	/* guard against SMP multithreading */
 	struct v4l2_prio_state prio;
 
 	/* camera status */

drivers/media/video/cs8420.h

@@ -20,7 +20,7 @@
 #define __CS8420_H__
 
 /* Initialization Sequence */
-	 
+
 static __u8 init8420[] = {
 	1, 0x01,	2, 0x02,	3, 0x00,	4, 0x46,
 	5, 0x24,	6, 0x84,	18, 0x18,	19, 0x13,

drivers/media/video/cx25840/cx25840-audio.c

@@ -18,7 +18,6 @@
 
 #include <linux/videodev2.h>
 #include <linux/i2c.h>
-#include <media/audiochip.h>
 #include <media/v4l2-common.h>
 
 #include "cx25840.h"