Commit 36ae6df0 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

[media] mt2063: Fix i2c read message

While here, improve a few debug messages that helped to track the
issue and may be useful in the future.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 19ad6a01
......@@ -305,35 +305,40 @@ static u32 mt2063_read(struct mt2063_state *state,
struct dvb_frontend *fe = state->frontend;
u32 i = 0;
dprintk(2, "\n");
dprintk(2, "addr 0x%02x, cnt %d\n", subAddress, cnt);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
for (i = 0; i < cnt; i++) {
int ret;
u8 b0[] = { subAddress + i };
struct i2c_msg msg[] = {
{
.addr = state->config->tuner_address,
.flags = I2C_M_RD,
.flags = 0,
.buf = b0,
.len = 1
}, {
.addr = state->config->tuner_address,
.flags = I2C_M_RD,
.buf = pData + 1,
.buf = pData + i,
.len = 1
}
};
ret = i2c_transfer(state->i2c, msg, 2);
if (ret < 0)
status = i2c_transfer(state->i2c, msg, 2);
dprintk(2, "addr 0x%02x, ret = %d, val = 0x%02x\n",
subAddress + i, status, *(pData + i));
if (status < 0)
break;
}
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
if (status < 0)
printk(KERN_ERR "Can't read from address 0x%02x,\n",
subAddress + i);
return status;
}
......@@ -1801,7 +1806,8 @@ static int mt2063_init(struct dvb_frontend *fe)
state->rcvr_mode = MT2063_CABLE_QAM;
/* Read the Part/Rev code from the tuner */
status = mt2063_read(state, MT2063_REG_PART_REV, state->reg, 1);
status = mt2063_read(state, MT2063_REG_PART_REV,
&state->reg[MT2063_REG_PART_REV], 1);
if (status < 0) {
printk(KERN_ERR "Can't read mt2063 part ID\n");
return status;
......@@ -1833,7 +1839,9 @@ static int mt2063_init(struct dvb_frontend *fe)
/* b7 != 0 ==> NOT MT2063 */
if (status < 0 || ((state->reg[MT2063_REG_RSVD_3B] & 0x80) != 0x00)) {
printk(KERN_ERR "mt2063: Unknown 2nd part ID\n");
printk(KERN_ERR "mt2063: Unknown part ID (0x%02x%02x)\n",
state->reg[MT2063_REG_PART_REV],
state->reg[MT2063_REG_RSVD_3B]);
return -ENODEV; /* Wrong tuner Part/Rev code */
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment