Skip to content

L
linux
Commit 37937ee7 authored by Olof Johansson's avatar Olof Johansson
Browse files
Options

Merge tag 'imx-dt64-5.3' of... 

Merge tag 'imx-dt64-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree changes for 5.3:
 - Add i.MX8MQ based Librem5 devkit support.
 - Add SNVS power key support for i.MX8MQ and i.MX8MM.
 - Add GPIO alias for imx8mq and i.MX8QXP.
 - A series from Daniel Baluta to add SAI devices and enable audio
   support for imx8mm-evk board.
 - Add DDR performance monitor unit support for i.MX8QXP.
 - Add irqsteer interrupt controller device for i.MX8MQ SoC.
 - Add CPU speed grading and all OPPs for i.MX8MM and i.MX8MQ.
 - Add OCOTP device node for i.MX8QXP.
 - Various device addition for LS1028A: SATA, qDMA, USB, Mali DP500 and
   temperature sensor.
 - Random minor coding style improvements.

* tag 'imx-dt64-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits)
  arm64: dts: librem5: enable the SNVS power key
  arm64: dts: librem5: Limit the USB to 5V
  arm64: dts: imx8qxp: added ddr performance monitor nodes
  arm64: dts: imx8qxp: sort LSIO subsystem devices
  arm64: dts: imx8qxp: sort alias alphabetically
  arm64: dts: imx8qxp: Add lsio_mu13 node
  arm64: dts: imx8mm-evk: Enable audio codec wm8524
  arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit
  arm64: dts: fsl: ls1028a: Add qDMA node
  arm64: dts: imx8mm: Enable SNVS power key according to board design
  arm64: dts: imx8mq-evk: Enable SNVS power key
  arm64: dts: ls1028a: add crypto node
  arm64: dts: ls1028a: Add temperature sensor node
  arm64: dts: imx8mm: Move gic node into soc node
  arm64: dts: imx8mm: Move usbphy out of soc node
  arm64: dts: imx8mm: Pass the 'ranges' property
  arm64: dts: imx8mm: Pass a unit name for the 'soc' node
  arm64: dts: fsl: imx8mq: add the snvs power key node
  arm64: dts: ls1028a: fix watchdog device node
  arm64: dts: ls1028a: Enable sata.
  ...
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 09253fcc 01407158
Expand all Show whitespace changes
Inline Side-by-side
Showing with 1429 additions and 89 deletions
arch/arm64/boot/dts/freescale/Makefile
View file @ 37937ee7
......@@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
View file @ 37937ee7
......@@ -17,6 +17,7 @@ / {
compatible = "fsl,ls1028a-qds", "fsl,ls1028a";
aliases {
crypto = &crypto;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
......@@ -47,6 +48,15 @@ reg_1p8v: regulator-1p8v {
regulator-always-on;
};
sb_3v3: regulator-sb3v3 {
compatible = "regulator-fixed";
regulator-name = "3v3_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
......@@ -117,6 +127,12 @@ i2c@3 {
#size-cells = <0>;
reg = <0x3>;
temperature-sensor@4c {
compatible = "nxp,sa56004";
reg = <0x4c>;
vcc-supply = <&sb_3v3>;
};
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
......@@ -153,3 +169,7 @@ sgtl5000: audio-codec@a {
&sai1 {
status = "okay";
};
&sata {
status = "okay";
};
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
View file @ 37937ee7
......@@ -16,6 +16,7 @@ / {
compatible = "fsl,ls1028a-rdb", "fsl,ls1028a";
aliases {
crypto = &crypto;
serial0 = &duart0;
serial1 = &duart1;
};
......@@ -43,6 +44,15 @@ reg_1p8v: regulator-1p8v {
regulator-always-on;
};
sb_3v3: regulator-sb3v3 {
compatible = "regulator-fixed";
regulator-name = "3v3_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
......@@ -115,6 +125,12 @@ i2c@3 {
#size-cells = <0>;
reg = <0x3>;
temperature-sensor@4c {
compatible = "nxp,sa56004";
reg = <0x4c>;
vcc-supply = <&sb_3v3>;
};
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
......@@ -151,3 +167,7 @@ &enetc_port1 {
&sai4 {
status = "okay";
};
&sata {
status = "okay";
};
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
View file @ 37937ee7
......@@ -70,6 +70,27 @@ sysclk: clock-sysclk {
clock-output-names = "sysclk";
};
dpclk: clock-dp {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
clock-output-names= "dpclk";
};
aclk: clock-axi {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <650000000>;
clock-output-names= "aclk";
};
pclk: clock-apb {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <650000000>;
clock-output-names= "pclk";
};
reboot {
compatible ="syscon-reboot";
regmap = <&dcfg>;
......@@ -285,13 +306,24 @@ gpio3: gpio@2320000 {
#interrupt-cells = <2>;
};
wdog0: watchdog@23c0000 {
compatible = "fsl,ls1028a-wdt", "fsl,imx21-wdt";
reg = <0x0 0x23c0000 0x0 0x10000>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
big-endian;
status = "disabled";
usb0: usb@3100000 {
compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,dis_rxdet_inp3_quirk;
snps,quirk-frame-length-adjustment = <0x20>;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
usb1: usb@3110000 {
compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
reg = <0x0 0x3110000 0x0 0x10000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,dis_rxdet_inp3_quirk;
snps,quirk-frame-length-adjustment = <0x20>;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@3200000 {
......@@ -356,6 +388,79 @@ smmu: iommu@5000000 {
<GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
};
crypto: crypto@8000000 {
compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
fsl,sec-era = <10>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x00 0x8000000 0x100000>;
reg = <0x00 0x8000000 0x0 0x100000>;
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
dma-coherent;
sec_jr0: jr@10000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr1: jr@20000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x20000 0x10000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr2: jr@30000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x30000 0x10000>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr3: jr@40000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x40000 0x10000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
};
};
qdma: dma-controller@8380000 {
compatible = "fsl,ls1028a-qdma", "fsl,ls1021a-qdma";
reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
<0x0 0x8390000 0x0 0x10000>, /* Status regs */
<0x0 0x83a0000 0x0 0x40000>; /* Block regs */
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "qdma-error", "qdma-queue0",
"qdma-queue1", "qdma-queue2", "qdma-queue3";
dma-channels = <8>;
block-number = <1>;
block-offset = <0x10000>;
fsl,dma-queues = <2>;
status-sizes = <64>;
queue-sizes = <64 64>;
};
cluster1_core0_watchdog: watchdog@c000000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
clocks = <&clockgen 4 15>, <&clockgen 4 15>;
clock-names = "apb_pclk", "wdog_clk";
};
cluster1_core1_watchdog: watchdog@c010000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
clocks = <&clockgen 4 15>, <&clockgen 4 15>;
clock-names = "apb_pclk", "wdog_clk";
};
sai1: audio-controller@f100000 {
#sound-dai-cells = <0>;
compatible = "fsl,vf610-sai";
......@@ -433,4 +538,21 @@ enetc_port1: ethernet@0,1 {
};
};
};
malidp0: display@f080000 {
compatible = "arm,mali-dp500";
reg = <0x0 0xf080000 0x0 0x10000>;
interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
<0 223 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "DE", "SE";
clocks = <&dpclk>, <&aclk>, <&aclk>, <&pclk>;
clock-names = "pxlclk", "mclk", "aclk", "pclk";
arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
port {
dp0_out: endpoint {
};
};
};
};
arch/arm64/boot/dts/freescale/imx8mm-evk.dts
View file @ 37937ee7
......@@ -37,6 +37,41 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
wm8524: audio-codec {
#sound-dai-cells = <0>;
compatible = "wlf,wm8524";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_wlf>;
wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
};
sound-wm8524 {
compatible = "simple-audio-card";
simple-audio-card,name = "wm8524-audio";
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&cpudai>;
simple-audio-card,bitclock-master = <&cpudai>;
simple-audio-card,widgets =
"Line", "Left Line Out Jack",
"Line", "Right Line Out Jack";
simple-audio-card,routing =
"Left Line Out Jack", "LINEVOUTL",
"Right Line Out Jack", "LINEVOUTR";
cpudai: simple-audio-card,cpu {
sound-dai = <&sai3>;
};
simple-audio-card,codec {
sound-dai = <&wm8524>;
clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
};
};
};
&A53_0 {
cpu-supply = <&buck2_reg>;
};
&fec1 {
......@@ -61,6 +96,19 @@ ethphy0: ethernet-phy@0 {
};
};
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
assigned-clock-rates = <24576000>;
status = "okay";
};
&snvs_pwrkey {
status = "okay";
};
&uart2 { /* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
......@@ -95,6 +143,120 @@ &wdog1 {
status = "okay";
};
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio1>;
interrupts = <3 GPIO_ACTIVE_LOW>;
rohm,reset-snvs-powered;
regulators {
buck1_reg: BUCK1 {
regulator-name = "BUCK1";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <1250>;
};
buck2_reg: BUCK2 {
regulator-name = "BUCK2";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <1250>;
rohm,dvs-run-voltage = <1000000>;
rohm,dvs-idle-voltage = <900000>;
};
buck3_reg: BUCK3 {
// BUCK5 in datasheet
regulator-name = "BUCK3";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1350000>;
regulator-boot-on;
regulator-always-on;
};
buck4_reg: BUCK4 {
// BUCK6 in datasheet
regulator-name = "BUCK4";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
buck5_reg: BUCK5 {
// BUCK7 in datasheet
regulator-name = "BUCK5";
regulator-min-microvolt = <1605000>;
regulator-max-microvolt = <1995000>;
regulator-boot-on;
regulator-always-on;
};
buck6_reg: BUCK6 {
// BUCK8 in datasheet
regulator-name = "BUCK6";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
regulator-always-on;
};
ldo1_reg: LDO1 {
regulator-name = "LDO1";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: LDO2 {
regulator-name = "LDO2";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;
};
ldo3_reg: LDO3 {
regulator-name = "LDO3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: LDO4 {
regulator-name = "LDO4";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo6_reg: LDO6 {
regulator-name = "LDO6";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
};
};
};
&iomuxc {
pinctrl-names = "default";
......@@ -124,12 +286,40 @@ MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19
>;
};
pinctrl_gpio_wlf: gpiowlfgrp {
fsl,pins = <
MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
>;
};
pinctrl_pmic: pmicirq {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
fsl,pins = <
MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
>;
};
pinctrl_sai3: sai3grp {
fsl,pins = <
MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
......
arch/arm64/boot/dts/freescale/imx8mm.dtsi
View file @ 37937ee7
......@@ -53,6 +53,8 @@ A53_0: cpu@0 {
enable-method = "psci";
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
nvmem-cells = <&cpu_speed_grade>;
nvmem-cell-names = "speed_grade";
};
A53_1: cpu@1 {
......@@ -100,14 +102,23 @@ a53_opp_table: opp-table {
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <850000>;
opp-supported-hw = <0xe>, <0x7>;
clock-latency-ns = <150000>;
};
opp-1600000000 {
opp-hz = /bits/ 64 <1600000000>;
opp-microvolt = <900000>;
opp-supported-hw = <0xc>, <0x7>;
clock-latency-ns = <150000>;
};
opp-1800000000 {
opp-hz = /bits/ 64 <1800000000>;
opp-microvolt = <1000000>;
/* Consumer only but rely on speed grading */
opp-supported-hw = <0x8>, <0x7>;
clock-latency-ns = <150000>;
opp-suspend;
};
};
......@@ -158,15 +169,6 @@ clk_ext4: clock-ext4 {
clock-output-names = "clk_ext4";
};
gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */
<0x0 0x38880000 0 0xC0000>; /* GICR (RD_base + SGI_base) */
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
......@@ -189,7 +191,23 @@ timer {
arm,no-tick-in-suspend;
};
soc {
usbphynop1: usbphynop1 {
compatible = "usb-nop-xceiv";
clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
clock-names = "main_clk";
};
usbphynop2: usbphynop2 {
compatible = "usb-nop-xceiv";
clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
clock-names = "main_clk";
};
soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
......@@ -199,7 +217,73 @@ aips1: bus@30000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ranges = <0x30000000 0x30000000 0x400000>;
sai1: sai@30010000 {
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
reg = <0x30010000 0x10000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
<&clk IMX8MM_CLK_SAI1_ROOT>,
<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
dma-names = "rx", "tx";
status = "disabled";
};
sai2: sai@30020000 {
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
reg = <0x30020000 0x10000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
<&clk IMX8MM_CLK_SAI2_ROOT>,
<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
dma-names = "rx", "tx";
status = "disabled";
};
sai3: sai@30030000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
reg = <0x30030000 0x10000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
<&clk IMX8MM_CLK_SAI3_ROOT>,
<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
dma-names = "rx", "tx";
status = "disabled";
};
sai5: sai@30050000 {
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
reg = <0x30050000 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
<&clk IMX8MM_CLK_SAI5_ROOT>,
<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
dma-names = "rx", "tx";
status = "disabled";
};
sai6: sai@30060000 {
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
reg = <0x30060000 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
<&clk IMX8MM_CLK_SAI6_ROOT>,
<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
dma-names = "rx", "tx";
status = "disabled";
};
gpio1: gpio@30200000 {
compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
......@@ -324,6 +408,10 @@ ocotp: ocotp-ctrl@30350000 {
/* For nvmem subnodes */
#address-cells = <1>;
#size-cells = <1>;
cpu_speed_grade: speed-grade@10 {
reg = <0x10 4>;
};
};
anatop: anatop@30360000 {
......@@ -351,6 +439,7 @@ snvs_pwrkey: snvs-powerkey {
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
wakeup-source;
status = "disabled";
};
};
......@@ -376,7 +465,7 @@ aips2: bus@30400000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ranges = <0x30400000 0x30400000 0x400000>;
pwm1: pwm@30660000 {
compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
......@@ -427,7 +516,7 @@ aips3: bus@30800000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ranges = <0x30800000 0x30800000 0x400000>;
ecspi1: spi@30820000 {
compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
......@@ -646,7 +735,7 @@ aips4: bus@32c00000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ranges = <0x32c00000 0x32c00000 0x400000>;
usbotg1: usb@32e40000 {
compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
......@@ -663,14 +752,6 @@ usbotg1: usb@32e40000 {
status = "disabled";
};
usbphynop1: usbphynop1 {
compatible = "usb-nop-xceiv";
clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
clock-names = "main_clk";
};
usbmisc1: usbmisc@32e40200 {
compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
#index-cells = <1>;
......@@ -692,14 +773,6 @@ usbotg2: usb@32e50000 {
status = "disabled";
};
usbphynop2: usbphynop2 {
compatible = "usb-nop-xceiv";
clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
clock-names = "main_clk";
};
usbmisc2: usbmisc@32e50200 {
compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
#index-cells = <1>;
......@@ -736,5 +809,14 @@ gpmi: nand-controller@33002000{
dma-names = "rx-tx";
status = "disabled";
};
gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>, /* GIC Dist */
<0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
arch/arm64/boot/dts/freescale/imx8mq-evk.dts
View file @ 37937ee7
......@@ -242,6 +242,10 @@ &pgc_gpu {
power-supply = <&sw1a_reg>;
};
&snvs_pwrkey {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
......
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts 0 → 100644
View file @ 37937ee7
This diff is collapsed.
arch/arm64/boot/dts/freescale/imx8mq.dtsi
View file @ 37937ee7
......@@ -8,6 +8,7 @@
#include <dt-bindings/power/imx8mq-power.h>
#include <dt-bindings/reset/imx8mq-reset.h>
#include <dt-bindings/gpio/gpio.h>
#include "dt-bindings/input/input.h"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
#include "imx8mq-pinfunc.h"
......@@ -19,6 +20,11 @@ / {
#size-cells = <2>;
aliases {
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
......@@ -95,6 +101,8 @@ A53_0: cpu@0 {
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
nvmem-cells = <&cpu_speed_grade>;
nvmem-cell-names = "speed_grade";
};
A53_1: cpu@1 {
......@@ -145,14 +153,32 @@ a53_opp_table: opp-table {
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <900000>;
/* Industrial only */
opp-supported-hw = <0xf>, <0x4>;
clock-latency-ns = <150000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <900000>;
/* Consumer only */
opp-supported-hw = <0xe>, <0x3>;
clock-latency-ns = <150000>;
};
opp-1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1000000>;
opp-supported-hw = <0xc>, <0x7>;
clock-latency-ns = <150000>;
};
opp-1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1000000>;
/* Consumer only but rely on speed grading */
opp-supported-hw = <0x8>, <0x7>;
clock-latency-ns = <150000>;
opp-suspend;
};
};
......@@ -415,6 +441,10 @@ ocotp: ocotp-ctrl@30350000 {
clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>;
#address-cells = <1>;
#size-cells = <1>;
cpu_speed_grade: speed-grade@10 {
reg = <0x10 4>;
};
};
anatop: syscon@30360000 {
......@@ -437,6 +467,14 @@ snvs_rtc: snvs-rtc-lp{
clock-names = "snvs-rtc";
};
snvs_pwrkey: snvs-powerkey {
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&snvs>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
wakeup-source;
status = "disabled";
};
};
clk: clock-controller@30380000 {
......@@ -817,6 +855,25 @@ fec1: ethernet@30be0000 {
};
};
bus@32c00000 { /* AIPS4 */
compatible = "fsl,imx8mq-aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x32c00000 0x32c00000 0x400000>;
irqsteer: interrupt-controller@32e2d000 {
compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer";
reg = <0x32e2d000 0x1000>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
clock-names = "ipg";
fsl,channel = <0>;
fsl,num-irqs = <64>;
interrupt-controller;
#interrupt-cells = <1>;
};
};
gpu: gpu@38000000 {
compatible = "vivante,gc";
reg = <0x38000000 0x40000>;
......@@ -905,7 +962,6 @@ usb3_phy1: usb-phy@382f0040 {
status = "disabled";
};
pcie0: pcie@33800000 {
compatible = "fsl,imx8mq-pcie";
reg = <0x33800000 0x400000>,
......
arch/arm64/boot/dts/freescale/imx8qxp.dtsi
View file @ 37937ee7
......@@ -17,11 +17,19 @@ / {
#size-cells = <2>;
aliases {
gpio0 = &lsio_gpio0;
gpio1 = &lsio_gpio1;
gpio2 = &lsio_gpio2;
gpio3 = &lsio_gpio3;
gpio4 = &lsio_gpio4;
gpio5 = &lsio_gpio5;
gpio6 = &lsio_gpio6;
gpio7 = &lsio_gpio7;
mmc0 = &usdhc1;
mmc1 = &usdhc2;
mmc2 = &usdhc3;
serial0 = &adma_lpuart0;
mu1 = &lsio_mu1;
serial0 = &adma_lpuart0;
};
cpus {
......@@ -141,6 +149,12 @@ iomuxc: pinctrl {
compatible = "fsl,imx8qxp-iomuxc";
};
ocotp: imx8qx-ocotp {
compatible = "fsl,imx8qxp-scu-ocotp";
#address-cells = <1>;
#size-cells = <1>;
};
pd: imx8qx-pd {
compatible = "fsl,imx8qxp-scu-pd";
#power-domain-cells = <1>;
......@@ -149,6 +163,11 @@ pd: imx8qx-pd {
rtc: rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
watchdog {
compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
timeout-sec = <60>;
};
};
timer {
......@@ -378,56 +397,25 @@ fec2: ethernet@5b050000 {
};
};
lsio_subsys: bus@5d000000 {
ddr_subsyss: bus@5c000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
lsio_lpcg: clock-controller@5d400000 {
compatible = "fsl,imx8qxp-lpcg-lsio";
reg = <0x5d400000 0x400000>;
#clock-cells = <1>;
};
lsio_mu0: mailbox@5d1b0000 {
compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1b0000 0x10000>;
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
status = "disabled";
};
ranges = <0x5c000000 0x0 0x5c000000 0x1000000>;
lsio_mu1: mailbox@5d1c0000 {
compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1c0000 0x10000>;
interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
ddr-pmu@5c020000 {
compatible = "fsl,imx8-ddr-pmu";
reg = <0x5c020000 0x10000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
};
lsio_mu2: mailbox@5d1d0000 {
compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1d0000 0x10000>;
interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
status = "disabled";
};
lsio_mu3: mailbox@5d1e0000 {
compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1e0000 0x10000>;
interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
status = "disabled";
};
lsio_mu4: mailbox@5d1f0000 {
compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1f0000 0x10000>;
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
status = "disabled";
};
lsio_subsys: bus@5d000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
lsio_gpio0: gpio@5d080000 {
compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
......@@ -516,10 +504,58 @@ lsio_gpio7: gpio@5d0f0000 {
#interrupt-cells = <2>;
power-domains = <&pd IMX_SC_R_GPIO_7>;
};
lsio_mu0: mailbox@5d1b0000 {
compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1b0000 0x10000>;
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
status = "disabled";
};
watchdog {
compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
timeout-sec = <60>;
lsio_mu1: mailbox@5d1c0000 {
compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1c0000 0x10000>;
interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
};
lsio_mu2: mailbox@5d1d0000 {
compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1d0000 0x10000>;
interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
status = "disabled";
};
lsio_mu3: mailbox@5d1e0000 {
compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1e0000 0x10000>;
interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
status = "disabled";
};
lsio_mu4: mailbox@5d1f0000 {
compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d1f0000 0x10000>;
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
status = "disabled";
};
lsio_mu13: mailbox@5d280000 {
compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
reg = <0x5d280000 0x10000>;
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <2>;
power-domains = <&pd IMX_SC_R_MU_13A>;
};
lsio_lpcg: clock-controller@5d400000 {
compatible = "fsl,imx8qxp-lpcg-lsio";
reg = <0x5d400000 0x400000>;
#clock-cells = <1>;
};
};
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7