Merge tag 'omap-for-v3.19/prcm-cleanup' of...

Merge tag 'omap-for-v3.19/prcm-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "omap prcm clean-up for v3.19" from Tony Lindgren:

Clean-up series for omap PRCM (Power Reset Clock Module) from
Tero Kristo to move things a bit closer to becoming a proper
device driver.

* tag 'omap-for-v3.19/prcm-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (26 commits)
  ARM: OMAP2+: PRM: provide generic API for system reset
  ARM: OMAP3+: PRM: add generic API for reconfiguring I/O chain
  ARM: OMAP4: PRM: make PRCM interrupt handler related functions static
  ARM: OMAP3: PRM: make PRCM interrupt handler related functions static
  ARM: OMAP4: PRM: make omap4_prm_read/write_inst_reg calls static
  ARM: AM33xx: PRM: make direct register access functions static
  ARM: AM33xx: PRM: move global warm reset implementation to driver
  ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
  ARM: OMAP4: CM: make cminst direct register access functions static
  ARM: OMAP4: CM: move public definitions from cminst44xx.h to cm44xx.h
  ARM: OMAP2+: PRM: add generic API for checking hardreset status
  ARM: OMAP2+: PRM: add generic API for deasserting hardware reset
  ARM: OMAP2+: PRM: add generic API for asserting hardware reset
  ARM: AM33xx: PRM: add support for prm_init
  ARM: AM43xx: hwmod: use OMAP4 hardreset ops instead of the AM33xx version
  ARM: AM33xx: hwmod: remove am33xx specific module SoC opts
  ARM: OMAP2/3: CM: make cm_split_idlest_reg SoC calls static
  ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable
  ARM: OMAP2+: CM: make clkdm_hwsup operations static
  ARM: OMAP4+/AM33xx: CM: add common API for cm_wait_module_idle
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/mach-omap2/Makefile

@@ -113,7 +113,7 @@ obj-y					+= prm_common.o cm_common.o
 obj-$(CONFIG_ARCH_OMAP2)		+= prm2xxx_3xxx.o prm2xxx.o cm2xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= prm2xxx_3xxx.o prm3xxx.o cm3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= vc3xxx_data.o vp3xxx_data.o
-omap-prcm-4-5-common			=  cminst44xx.o cm44xx.o prm44xx.o \
+omap-prcm-4-5-common			=  cminst44xx.o prm44xx.o \
 					   prcm_mpu44xx.o prminst44xx.o \
 					   vc44xx_data.o vp44xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-prcm-4-5-common)

arch/arm/mach-omap2/am33xx-restart.c

@@ -9,8 +9,7 @@
 #include <linux/reboot.h>
 
 #include "common.h"
-#include "prm-regbits-33xx.h"
-#include "prm33xx.h"
+#include "prm.h"
 
 /**
  * am3xx_restart - trigger a software restart of the SoC
@@ -24,12 +23,5 @@ void am33xx_restart(enum reboot_mode mode, const char *cmd)
 {
 	/* TODO: Handle mode and cmd if necessary */
 
-	am33xx_prm_rmw_reg_bits(AM33XX_RST_GLOBAL_WARM_SW_MASK,
-				AM33XX_RST_GLOBAL_WARM_SW_MASK,
-				AM33XX_PRM_DEVICE_MOD,
-				AM33XX_PRM_RSTCTRL_OFFSET);
-
-	/* OCP barrier */
-	(void)am33xx_prm_read_reg(AM33XX_PRM_DEVICE_MOD,
-				  AM33XX_PRM_RSTCTRL_OFFSET);
+	omap_prm_reset_system();
 }

arch/arm/mach-omap2/clock.c

@@ -171,7 +171,8 @@ static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
 		_wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit),
 				     idlest_val, __clk_get_name(clk->hw.clk));
 	} else {
-		cm_wait_module_ready(prcm_mod, idlest_reg_id, idlest_bit);
+		omap_cm_wait_module_ready(0, prcm_mod, idlest_reg_id,
+					  idlest_bit);
 	};
 }
 

arch/arm/mach-omap2/cm.h

@@ -45,17 +45,29 @@ extern void omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2);
  * struct cm_ll_data - fn ptrs to per-SoC CM function implementations
  * @split_idlest_reg: ptr to the SoC CM-specific split_idlest_reg impl
  * @wait_module_ready: ptr to the SoC CM-specific wait_module_ready impl
+ * @wait_module_idle: ptr to the SoC CM-specific wait_module_idle impl
+ * @module_enable: ptr to the SoC CM-specific module_enable impl
+ * @module_disable: ptr to the SoC CM-specific module_disable impl
  */
 struct cm_ll_data {
 	int (*split_idlest_reg)(void __iomem *idlest_reg, s16 *prcm_inst,
 				u8 *idlest_reg_id);
-	int (*wait_module_ready)(s16 prcm_mod, u8 idlest_id, u8 idlest_shift);
+	int (*wait_module_ready)(u8 part, s16 prcm_mod, u16 idlest_reg,
+				 u8 idlest_shift);
+	int (*wait_module_idle)(u8 part, s16 prcm_mod, u16 idlest_reg,
+				u8 idlest_shift);
+	void (*module_enable)(u8 mode, u8 part, u16 inst, u16 clkctrl_offs);
+	void (*module_disable)(u8 part, u16 inst, u16 clkctrl_offs);
 };
 
 extern int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
 			       u8 *idlest_reg_id);
-extern int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift);
-
+int omap_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_reg,
+			      u8 idlest_shift);
+int omap_cm_wait_module_idle(u8 part, s16 prcm_mod, u16 idlest_reg,
+			     u8 idlest_shift);
+int omap_cm_module_enable(u8 mode, u8 part, u16 inst, u16 clkctrl_offs);
+int omap_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs);
 extern int cm_register(struct cm_ll_data *cld);
 extern int cm_unregister(struct cm_ll_data *cld);
 

arch/arm/mach-omap2/cm1_44xx.h

@@ -25,8 +25,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM1_44XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM1_44XX_H
 
-#include "cm_44xx_54xx.h"
-
 /* CM1 base address */
 #define OMAP4430_CM1_BASE		0x4a004000
 

arch/arm/mach-omap2/cm1_54xx.h

@@ -22,8 +22,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM1_54XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM1_54XX_H
 
-#include "cm_44xx_54xx.h"
-
 /* CM1 base address */
 #define OMAP54XX_CM_CORE_AON_BASE		0x4a004000
 

arch/arm/mach-omap2/cm1_7xx.h

@@ -23,8 +23,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM1_7XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM1_7XX_H
 
-#include "cm_44xx_54xx.h"
-
 /* CM1 base address */
 #define DRA7XX_CM_CORE_AON_BASE		0x4a005000
 

arch/arm/mach-omap2/cm2_44xx.h

@@ -25,8 +25,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM2_44XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM2_44XX_H
 
-#include "cm_44xx_54xx.h"
-
 /* CM2 base address */
 #define OMAP4430_CM2_BASE		0x4a008000
 

arch/arm/mach-omap2/cm2_54xx.h

@@ -21,8 +21,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM2_54XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM2_54XX_H
 
-#include "cm_44xx_54xx.h"
-
 /* CM2 base address */
 #define OMAP54XX_CM_CORE_BASE		0x4a008000
 

arch/arm/mach-omap2/cm2_7xx.h

@@ -22,8 +22,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM2_7XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM2_7XX_H
 
-#include "cm_44xx_54xx.h"
-
 /* CM2 base address */
 #define DRA7XX_CM_CORE_BASE		0x4a008000
 

arch/arm/mach-omap2/cm2xxx.c

@@ -53,7 +53,7 @@ static void _write_clktrctrl(u8 c, s16 module, u32 mask)
 	omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
 }
 
-bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
+static bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
 {
 	u32 v;
 
@@ -64,12 +64,12 @@ bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
 	return (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
 }
 
-void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
+static void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
 {
 	_write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
 }
 
-void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
+static void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
 {
 	_write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
 }
@@ -150,7 +150,7 @@ static int _omap2xxx_apll_enable(u8 enable_bit, u8 status_bit)
 	v |= m;
 	omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
 
-	omap2xxx_cm_wait_module_ready(PLL_MOD, 1, status_bit);
+	omap2xxx_cm_wait_module_ready(0, PLL_MOD, 1, status_bit);
 
 	/*
 	 * REVISIT: Should we return an error code if
@@ -204,8 +204,9 @@ void omap2xxx_cm_apll96_disable(void)
  * XXX This function is only needed until absolute register addresses are
  * removed from the OMAP struct clk records.
  */
-int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
-				 u8 *idlest_reg_id)
+static int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
+					s16 *prcm_inst,
+					u8 *idlest_reg_id)
 {
 	unsigned long offs;
 	u8 idlest_offs;
@@ -238,6 +239,7 @@ int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
 
 /**
  * omap2xxx_cm_wait_module_ready - wait for a module to leave idle or standby
+ * @part: PRCM partition, ignored for OMAP2
  * @prcm_mod: PRCM module offset
  * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
  * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
@@ -246,7 +248,8 @@ int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
  * (@prcm_mod, @idlest_id, @idlest_shift) is clocked.  Return 0 upon
  * success or -EBUSY if the module doesn't enable in time.
  */
-int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+int omap2xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
+				  u8 idlest_shift)
 {
 	int ena = 0, i = 0;
 	u8 cm_idlest_reg;

arch/arm/mach-omap2/cm2xxx.h

@@ -46,9 +46,6 @@
 
 #ifndef __ASSEMBLER__
 
-extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
-extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
-
 extern void omap2xxx_cm_set_dpll_disable_autoidle(void);
 extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
 
@@ -57,11 +54,8 @@ extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void);
 extern void omap2xxx_cm_set_apll96_disable_autoidle(void);
 extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
 
-extern bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
-extern int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
-					 u8 idlest_shift);
-extern int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
-					s16 *prcm_inst, u8 *idlest_reg_id);
+int omap2xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
+				  u8 idlest_shift);
 extern int omap2xxx_cm_fclks_active(void);
 extern int omap2xxx_cm_mpu_retention_allowed(void);
 extern u32 omap2xxx_cm_get_core_clk_src(void);

arch/arm/mach-omap2/cm33xx.c

@@ -96,13 +96,12 @@ static inline u32 am33xx_cm_read_reg_bits(u16 inst, s16 idx, u32 mask)
 /**
  * _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
  *
  * Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to
  * bit 0.
  */
-static u32 _clkctrl_idlest(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static u32 _clkctrl_idlest(u16 inst, u16 clkctrl_offs)
 {
 	u32 v = am33xx_cm_read_reg(inst, clkctrl_offs);
 	v &= AM33XX_IDLEST_MASK;
@@ -113,17 +112,16 @@ static u32 _clkctrl_idlest(u16 inst, s16 cdoffs, u16 clkctrl_offs)
 /**
  * _is_module_ready - can module registers be accessed without causing an abort?
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
  *
  * Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either
  * *FUNCTIONAL or *INTERFACE_IDLE; false otherwise.
  */
-static bool _is_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static bool _is_module_ready(u16 inst, u16 clkctrl_offs)
 {
 	u32 v;
 
-	v = _clkctrl_idlest(inst, cdoffs, clkctrl_offs);
+	v = _clkctrl_idlest(inst, clkctrl_offs);
 
 	return (v == CLKCTRL_IDLEST_FUNCTIONAL ||
 		v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false;
@@ -158,7 +156,7 @@ static void _clktrctrl_write(u8 c, u16 inst, u16 cdoffs)
  * Returns true if the clockdomain referred to by (@inst, @cdoffs)
  * is in hardware-supervised idle mode, or 0 otherwise.
  */
-bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs)
+static bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs)
 {
 	u32 v;
 
@@ -177,7 +175,7 @@ bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs)
  * Put a clockdomain referred to by (@inst, @cdoffs) into
  * hardware-supervised idle mode.  No return value.
  */
-void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs)
+static void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, inst, cdoffs);
 }
@@ -191,7 +189,7 @@ void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs)
  * software-supervised idle mode, i.e., controlled manually by the
  * Linux OMAP clockdomain code.  No return value.
  */
-void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs)
+static void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, inst, cdoffs);
 }
@@ -204,7 +202,7 @@ void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs)
  * Put a clockdomain referred to by (@inst, @cdoffs) into idle
  * No return value.
  */
-void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs)
+static void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, inst, cdoffs);
 }
@@ -217,7 +215,7 @@ void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs)
  * Take a clockdomain referred to by (@inst, @cdoffs) out of idle,
  * waking it up.  No return value.
  */
-void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs)
+static void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, inst, cdoffs);
 }
@@ -228,20 +226,22 @@ void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs)
 
 /**
  * am33xx_cm_wait_module_ready - wait for a module to be in 'func' state
+ * @part: PRCM partition, ignored for AM33xx
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ * @bit_shift: bit shift for the register, ignored for AM33xx
  *
  * Wait for the module IDLEST to be functional. If the idle state is in any
  * the non functional state (trans, idle or disabled), module and thus the
  * sysconfig cannot be accessed and will probably lead to an "imprecise
  * external abort"
  */
-int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static int am33xx_cm_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
+				       u8 bit_shift)
 {
 	int i = 0;
 
-	omap_test_timeout(_is_module_ready(inst, cdoffs, clkctrl_offs),
+	omap_test_timeout(_is_module_ready(inst, clkctrl_offs),
 			  MAX_MODULE_READY_TIME, i);
 
 	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
@@ -250,22 +250,24 @@ int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
 /**
  * am33xx_cm_wait_module_idle - wait for a module to be in 'disabled'
  * state
+ * @part: CM partition, ignored for AM33xx
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ * @bit_shift: bit shift for the register, ignored for AM33xx
  *
  * Wait for the module IDLEST to be disabled. Some PRCM transition,
  * like reset assertion or parent clock de-activation must wait the
  * module to be fully disabled.
  */
-int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static int am33xx_cm_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
+				      u8 bit_shift)
 {
 	int i = 0;
 
 	if (!clkctrl_offs)
 		return 0;
 
-	omap_test_timeout((_clkctrl_idlest(inst, cdoffs, clkctrl_offs) ==
+	omap_test_timeout((_clkctrl_idlest(inst, clkctrl_offs) ==
 				CLKCTRL_IDLEST_DISABLED),
 				MAX_MODULE_READY_TIME, i);
 
@@ -275,13 +277,14 @@ int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs)
 /**
  * am33xx_cm_module_enable - Enable the modulemode inside CLKCTRL
  * @mode: Module mode (SW or HW)
+ * @part: CM partition, ignored for AM33xx
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
  *
  * No return value.
  */
-void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static void am33xx_cm_module_enable(u8 mode, u8 part, u16 inst,
+				    u16 clkctrl_offs)
 {
 	u32 v;
 
@@ -293,13 +296,13 @@ void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, u16 clkctrl_offs)
 
 /**
  * am33xx_cm_module_disable - Disable the module inside CLKCTRL
+ * @part: CM partition, ignored for AM33xx
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
  *
  * No return value.
  */
-void am33xx_cm_module_disable(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static void am33xx_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs)
 {
 	u32 v;
 
@@ -362,3 +365,21 @@ struct clkdm_ops am33xx_clkdm_operations = {
 	.clkdm_clk_enable	= am33xx_clkdm_clk_enable,
 	.clkdm_clk_disable	= am33xx_clkdm_clk_disable,
 };
+
+static struct cm_ll_data am33xx_cm_ll_data = {
+	.wait_module_ready	= &am33xx_cm_wait_module_ready,
+	.wait_module_idle	= &am33xx_cm_wait_module_idle,
+	.module_enable		= &am33xx_cm_module_enable,
+	.module_disable		= &am33xx_cm_module_disable,
+};
+
+int __init am33xx_cm_init(void)
+{
+	return cm_register(&am33xx_cm_ll_data);
+}
+
+static void __exit am33xx_cm_exit(void)
+{
+	cm_unregister(&am33xx_cm_ll_data);
+}
+__exitcall(am33xx_cm_exit);

arch/arm/mach-omap2/cm33xx.h

@@ -374,41 +374,6 @@
 
 
 #ifndef __ASSEMBLER__
-bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs);
-void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs);
-void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs);
-void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs);
-void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs);
-
-#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
-extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
-					u16 clkctrl_offs);
-extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,
-					u16 clkctrl_offs);
-extern void am33xx_cm_module_disable(u16 inst, s16 cdoffs,
-					u16 clkctrl_offs);
-extern int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs,
-					u16 clkctrl_offs);
-#else
-static inline int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
-					u16 clkctrl_offs)
-{
-	return 0;
-}
-static inline void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,
-					u16 clkctrl_offs)
-{
-}
-static inline void am33xx_cm_module_disable(u16 inst, s16 cdoffs,
-					u16 clkctrl_offs)
-{
-}
-static inline int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs,
-					u16 clkctrl_offs)
-{
-	return 0;
-}
-#endif
-
+int am33xx_cm_init(void);
 #endif /* ASSEMBLER */
 #endif

arch/arm/mach-omap2/cm3xxx.c

@@ -42,7 +42,7 @@ static void _write_clktrctrl(u8 c, s16 module, u32 mask)
 	omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
 }
 
-bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
+static bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
 {
 	u32 v;
 
@@ -53,22 +53,22 @@ bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
 	return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
 }
 
-void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
+static void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
 {
 	_write_clktrctrl(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
 }
 
-void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
+static void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
 {
 	_write_clktrctrl(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
 }
 
-void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask)
+static void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask)
 {
 	_write_clktrctrl(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, module, mask);
 }
 
-void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask)
+static void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask)
 {
 	_write_clktrctrl(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, module, mask);
 }
@@ -79,6 +79,7 @@ void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask)
 
 /**
  * omap3xxx_cm_wait_module_ready - wait for a module to leave idle or standby
+ * @part: PRCM partition, ignored for OMAP3
  * @prcm_mod: PRCM module offset
  * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
  * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
@@ -87,7 +88,8 @@ void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask)
  * (@prcm_mod, @idlest_id, @idlest_shift) is clocked.  Return 0 upon
  * success or -EBUSY if the module doesn't enable in time.
  */
-int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+static int omap3xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
+					 u8 idlest_shift)
 {
 	int ena = 0, i = 0;
 	u8 cm_idlest_reg;
@@ -116,8 +118,9 @@ int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
  * XXX This function is only needed until absolute register addresses are
  * removed from the OMAP struct clk records.
  */
-int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
-				 u8 *idlest_reg_id)
+static int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
+					s16 *prcm_inst,
+					u8 *idlest_reg_id)
 {
 	unsigned long offs;
 	u8 idlest_offs;

arch/arm/mach-omap2/cm3xxx.h

@@ -68,18 +68,6 @@
 
 #ifndef __ASSEMBLER__
 
-extern void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask);
-
-extern bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
-extern int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
-					 u8 idlest_shift);
-
-extern int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
-					s16 *prcm_inst, u8 *idlest_reg_id);
-
 extern void omap3_cm_save_context(void);
 extern void omap3_cm_restore_context(void);
 extern void omap3_cm_save_scratchpad_contents(u32 *ptr);

arch/arm/mach-omap2/cm44xx.c

-/*
- * OMAP4 CM1, CM2 module low-level functions
- *
- * Copyright (C) 2010 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * These functions are intended to be used only by the cminst44xx.c file.
- * XXX Perhaps we should just move them there and make them static.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include "cm.h"
-#include "cm1_44xx.h"
-#include "cm2_44xx.h"
-
-/* CM1 hardware module low-level functions */
-
-/* Read a register in CM1 */
-u32 omap4_cm1_read_inst_reg(s16 inst, u16 reg)
-{
-	return readl_relaxed(cm_base + inst + reg);
-}
-
-/* Write into a register in CM1 */
-void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 reg)
-{
-	writel_relaxed(val, cm_base + inst + reg);
-}
-
-/* Read a register in CM2 */
-u32 omap4_cm2_read_inst_reg(s16 inst, u16 reg)
-{
-	return readl_relaxed(cm2_base + inst + reg);
-}
-
-/* Write into a register in CM2 */
-void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 reg)
-{
-	writel_relaxed(val, cm2_base + inst + reg);
-}

arch/arm/mach-omap2/cm44xx.h

@@ -23,4 +23,7 @@
 #define OMAP4_CM_CLKSTCTRL				0x0000
 #define OMAP4_CM_STATICDEP				0x0004
 
+void omap_cm_base_init(void);
+int omap4_cm_init(void);
+
 #endif

arch/arm/mach-omap2/cm_44xx_54xx.h

-/*
- * OMAP44xx and OMAP54xx CM1/CM2 function prototypes
- *
- * Copyright (C) 2009-2013 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Paul Walmsley (paul@pwsan.com)
- * Rajendra Nayak (rnayak@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CM_44XX_54XX_H
-#define __ARCH_ARM_MACH_OMAP2_CM_44XX_55XX_H
-
-/* CM1 Function prototypes */
-extern u32 omap4_cm1_read_inst_reg(s16 inst, u16 idx);
-extern void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 idx);
-extern u32 omap4_cm1_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
-
-/* CM2 Function prototypes */
-extern u32 omap4_cm2_read_inst_reg(s16 inst, u16 idx);
-extern void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 idx);
-extern u32 omap4_cm2_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
-
-#endif

arch/arm/mach-omap2/cm_common.c

@@ -72,9 +72,10 @@ int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
 }
 
 /**
- * cm_wait_module_ready - wait for a module to leave idle or standby
+ * omap_cm_wait_module_ready - wait for a module to leave idle or standby
+ * @part: PRCM partition
  * @prcm_mod: PRCM module offset
- * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
+ * @idlest_reg: CM_IDLESTx register
  * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
  *
  * Wait for the PRCM to indicate that the module identified by
@@ -83,7 +84,8 @@ int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
  * no per-SoC wait_module_ready() function pointer has been registered
  * or if the idlest register is unknown on the SoC.
  */
-int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+int omap_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_reg,
+			      u8 idlest_shift)
 {
 	if (!cm_ll_data->wait_module_ready) {
 		WARN_ONCE(1, "cm: %s: no low-level function defined\n",
@@ -91,7 +93,79 @@ int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
 		return -EINVAL;
 	}
 
-	return cm_ll_data->wait_module_ready(prcm_mod, idlest_id, idlest_shift);
+	return cm_ll_data->wait_module_ready(part, prcm_mod, idlest_reg,
+					     idlest_shift);
+}
+
+/**
+ * omap_cm_wait_module_idle - wait for a module to enter idle or standby
+ * @part: PRCM partition
+ * @prcm_mod: PRCM module offset
+ * @idlest_reg: CM_IDLESTx register
+ * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
+ *
+ * Wait for the PRCM to indicate that the module identified by
+ * (@prcm_mod, @idlest_id, @idlest_shift) is no longer clocked.  Return
+ * 0 upon success, -EBUSY if the module doesn't enable in time, or
+ * -EINVAL if no per-SoC wait_module_idle() function pointer has been
+ * registered or if the idlest register is unknown on the SoC.
+ */
+int omap_cm_wait_module_idle(u8 part, s16 prcm_mod, u16 idlest_reg,
+			     u8 idlest_shift)
+{
+	if (!cm_ll_data->wait_module_idle) {
+		WARN_ONCE(1, "cm: %s: no low-level function defined\n",
+			  __func__);
+		return -EINVAL;
+	}
+
+	return cm_ll_data->wait_module_idle(part, prcm_mod, idlest_reg,
+					    idlest_shift);
+}
+
+/**
+ * omap_cm_module_enable - enable a module
+ * @mode: target mode for the module
+ * @part: PRCM partition
+ * @inst: PRCM instance
+ * @clkctrl_offs: CM_CLKCTRL register offset for the module
+ *
+ * Enables clocks for a module identified by (@part, @inst, @clkctrl_offs)
+ * making its IO space accessible. Return 0 upon success, -EINVAL if no
+ * per-SoC module_enable() function pointer has been registered.
+ */
+int omap_cm_module_enable(u8 mode, u8 part, u16 inst, u16 clkctrl_offs)
+{
+	if (!cm_ll_data->module_enable) {
+		WARN_ONCE(1, "cm: %s: no low-level function defined\n",
+			  __func__);
+		return -EINVAL;
+	}
+
+	cm_ll_data->module_enable(mode, part, inst, clkctrl_offs);
+	return 0;
+}
+
+/**
+ * omap_cm_module_disable - disable a module
+ * @part: PRCM partition
+ * @inst: PRCM instance
+ * @clkctrl_offs: CM_CLKCTRL register offset for the module
+ *
+ * Disables clocks for a module identified by (@part, @inst, @clkctrl_offs)
+ * makings its IO space inaccessible. Return 0 upon success, -EINVAL if
+ * no per-SoC module_disable() function pointer has been registered.
+ */
+int omap_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs)
+{
+	if (!cm_ll_data->module_disable) {
+		WARN_ONCE(1, "cm: %s: no low-level function defined\n",
+			  __func__);
+		return -EINVAL;
+	}
+
+	cm_ll_data->module_disable(part, inst, clkctrl_offs);
+	return 0;
 }
 
 /**

arch/arm/mach-omap2/cminst44xx.c

@@ -26,7 +26,6 @@
 #include "cm1_44xx.h"
 #include "cm2_44xx.h"
 #include "cm44xx.h"
-#include "cminst44xx.h"
 #include "cm-regbits-34xx.h"
 #include "prcm44xx.h"
 #include "prm44xx.h"
@@ -74,17 +73,18 @@ void omap_cm_base_init(void)
 
 /* Private functions */
 
+static u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx);
+
 /**
  * _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield
  * @part: PRCM partition ID that the CM_CLKCTRL register exists in
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
  *
  * Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to
  * bit 0.
  */
-static u32 _clkctrl_idlest(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static u32 _clkctrl_idlest(u8 part, u16 inst, u16 clkctrl_offs)
 {
 	u32 v = omap4_cminst_read_inst_reg(part, inst, clkctrl_offs);
 	v &= OMAP4430_IDLEST_MASK;
@@ -96,26 +96,23 @@ static u32 _clkctrl_idlest(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
  * _is_module_ready - can module registers be accessed without causing an abort?
  * @part: PRCM partition ID that the CM_CLKCTRL register exists in
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
  *
  * Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either
  * *FUNCTIONAL or *INTERFACE_IDLE; false otherwise.
  */
-static bool _is_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static bool _is_module_ready(u8 part, u16 inst, u16 clkctrl_offs)
 {
 	u32 v;
 
-	v = _clkctrl_idlest(part, inst, cdoffs, clkctrl_offs);
+	v = _clkctrl_idlest(part, inst, clkctrl_offs);
 
 	return (v == CLKCTRL_IDLEST_FUNCTIONAL ||
 		v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false;
 }
 
-/* Public functions */
-
 /* Read a register in a CM instance */
-u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx)
+static u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx)
 {
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
@@ -124,7 +121,7 @@ u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx)
 }
 
 /* Write into a register in a CM instance */
-void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx)
+static void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx)
 {
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
@@ -133,8 +130,8 @@ void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx)
 }
 
 /* Read-modify-write a register in CM1. Caller must lock */
-u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, u16 inst,
-				   s16 idx)
+static u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, u16 inst,
+					  s16 idx)
 {
 	u32 v;
 
@@ -146,17 +143,18 @@ u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, u16 inst,
 	return v;
 }
 
-u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, u16 inst, s16 idx)
+static u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, u16 inst, s16 idx)
 {
 	return omap4_cminst_rmw_inst_reg_bits(bits, bits, part, inst, idx);
 }
 
-u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, u16 inst, s16 idx)
+static u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, u16 inst,
+					    s16 idx)
 {
 	return omap4_cminst_rmw_inst_reg_bits(bits, 0x0, part, inst, idx);
 }
 
-u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, u32 mask)
+static u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, u32 mask)
 {
 	u32 v;
 
@@ -200,7 +198,7 @@ static void _clktrctrl_write(u8 c, u8 part, u16 inst, u16 cdoffs)
  * Returns true if the clockdomain referred to by (@part, @inst, @cdoffs)
  * is in hardware-supervised idle mode, or 0 otherwise.
  */
-bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs)
+static bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs)
 {
 	u32 v;
 
@@ -220,7 +218,7 @@ bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs)
  * Put a clockdomain referred to by (@part, @inst, @cdoffs) into
  * hardware-supervised idle mode.  No return value.
  */
-void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs)
+static void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, part, inst, cdoffs);
 }
@@ -235,7 +233,7 @@ void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs)
  * software-supervised idle mode, i.e., controlled manually by the
  * Linux OMAP clockdomain code.  No return value.
  */
-void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs)
+static void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, part, inst, cdoffs);
 }
@@ -249,7 +247,7 @@ void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs)
  * Take a clockdomain referred to by (@part, @inst, @cdoffs) out of idle,
  * waking it up.  No return value.
  */
-void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs)
+static void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, part, inst, cdoffs);
 }
@@ -258,7 +256,7 @@ void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs)
  *
  */
 
-void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs)
+static void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, part, inst, cdoffs);
 }
@@ -267,23 +265,23 @@ void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs)
  * omap4_cminst_wait_module_ready - wait for a module to be in 'func' state
  * @part: PRCM partition ID that the CM_CLKCTRL register exists in
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ * @bit_shift: bit shift for the register, ignored for OMAP4+
  *
  * Wait for the module IDLEST to be functional. If the idle state is in any
  * the non functional state (trans, idle or disabled), module and thus the
  * sysconfig cannot be accessed and will probably lead to an "imprecise
  * external abort"
  */
-int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs,
-				   u16 clkctrl_offs)
+static int omap4_cminst_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
+					  u8 bit_shift)
 {
 	int i = 0;
 
 	if (!clkctrl_offs)
 		return 0;
 
-	omap_test_timeout(_is_module_ready(part, inst, cdoffs, clkctrl_offs),
+	omap_test_timeout(_is_module_ready(part, inst, clkctrl_offs),
 			  MAX_MODULE_READY_TIME, i);
 
 	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
@@ -294,21 +292,22 @@ int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs,
  * state
  * @part: PRCM partition ID that the CM_CLKCTRL register exists in
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ * @bit_shift: Bit shift for the register, ignored for OMAP4+
  *
  * Wait for the module IDLEST to be disabled. Some PRCM transition,
  * like reset assertion or parent clock de-activation must wait the
  * module to be fully disabled.
  */
-int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static int omap4_cminst_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
+					 u8 bit_shift)
 {
 	int i = 0;
 
 	if (!clkctrl_offs)
 		return 0;
 
-	omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) ==
+	omap_test_timeout((_clkctrl_idlest(part, inst, clkctrl_offs) ==
 			   CLKCTRL_IDLEST_DISABLED),
 			  MAX_MODULE_DISABLE_TIME, i);
 
@@ -320,13 +319,12 @@ int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_off
  * @mode: Module mode (SW or HW)
  * @part: PRCM partition ID that the CM_CLKCTRL register exists in
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
  *
  * No return value.
  */
-void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
-			    u16 clkctrl_offs)
+static void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
+				       u16 clkctrl_offs)
 {
 	u32 v;
 
@@ -340,13 +338,11 @@ void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
  * omap4_cminst_module_disable - Disable the module inside CLKCTRL
  * @part: PRCM partition ID that the CM_CLKCTRL register exists in
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
  *
  * No return value.
  */
-void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
-			     u16 clkctrl_offs)
+static void omap4_cminst_module_disable(u8 part, u16 inst, u16 clkctrl_offs)
 {
 	u32 v;
 
@@ -510,3 +506,21 @@ struct clkdm_ops am43xx_clkdm_operations = {
 	.clkdm_clk_enable	= omap4_clkdm_clk_enable,
 	.clkdm_clk_disable	= omap4_clkdm_clk_disable,
 };
+
+static struct cm_ll_data omap4xxx_cm_ll_data = {
+	.wait_module_ready	= &omap4_cminst_wait_module_ready,
+	.wait_module_idle	= &omap4_cminst_wait_module_idle,
+	.module_enable		= &omap4_cminst_module_enable,
+	.module_disable		= &omap4_cminst_module_disable,
+};
+
+int __init omap4_cm_init(void)
+{
+	return cm_register(&omap4xxx_cm_ll_data);
+}
+
+static void __exit omap4_cm_exit(void)
+{
+	cm_unregister(&omap4xxx_cm_ll_data);
+}
+__exitcall(omap4_cm_exit);

arch/arm/mach-omap2/cminst44xx.h

-/*
- * OMAP4 Clock Management (CM) function prototypes
- *
- * Copyright (C) 2010 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ARCH_ASM_MACH_OMAP2_CMINST44XX_H
-#define __ARCH_ASM_MACH_OMAP2_CMINST44XX_H
-
-bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs);
-void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs);
-void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs);
-void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs);
-void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs);
-extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
-extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
-					 u16 clkctrl_offs);
-extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
-				       u16 clkctrl_offs);
-extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
-					u16 clkctrl_offs);
-/*
- * In an ideal world, we would not export these low-level functions,
- * but this will probably take some time to fix properly
- */
-u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx);
-void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx);
-u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part,
-				   u16 inst, s16 idx);
-u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, u16 inst,
-				   s16 idx);
-u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, u16 inst,
-				     s16 idx);
-extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx,
-					   u32 mask);
-
-extern void omap_cm_base_init(void);
-
-#endif

arch/arm/mach-omap2/io.c

@@ -45,13 +45,15 @@
 #include "sram.h"
 #include "cm2xxx.h"
 #include "cm3xxx.h"
+#include "cm33xx.h"
+#include "cm44xx.h"
 #include "prm.h"
 #include "cm.h"
 #include "prcm_mpu44xx.h"
 #include "prminst44xx.h"
-#include "cminst44xx.h"
 #include "prm2xxx.h"
 #include "prm3xxx.h"
+#include "prm33xx.h"
 #include "prm44xx.h"
 #include "opp2xxx.h"
 
@@ -565,6 +567,8 @@ void __init am33xx_init_early(void)
 	omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), NULL);
 	omap3xxx_check_revision();
 	am33xx_check_features();
+	am33xx_prm_init();
+	am33xx_cm_init();
 	am33xx_powerdomains_init();
 	am33xx_clockdomains_init();
 	am33xx_hwmod_init();
@@ -591,6 +595,8 @@ void __init am43xx_init_early(void)
 	omap_cm_base_init();
 	omap3xxx_check_revision();
 	am33xx_check_features();
+	omap44xx_prm_init();
+	omap4_cm_init();
 	am43xx_powerdomains_init();
 	am43xx_clockdomains_init();
 	am43xx_hwmod_init();
@@ -620,6 +626,7 @@ void __init omap4430_init_early(void)
 	omap_cm_base_init();
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
+	omap4_cm_init();
 	omap4_pm_init_early();
 	omap44xx_prm_init();
 	omap44xx_voltagedomains_init();
@@ -655,6 +662,7 @@ void __init omap5_init_early(void)
 	omap_cm_base_init();
 	omap44xx_prm_init();
 	omap5xxx_check_revision();
+	omap4_cm_init();
 	omap54xx_voltagedomains_init();
 	omap54xx_powerdomains_init();
 	omap54xx_clockdomains_init();
@@ -686,6 +694,7 @@ void __init dra7xx_init_early(void)
 	omap_cm_base_init();
 	omap44xx_prm_init();
 	dra7xxx_check_revision();
+	omap4_cm_init();
 	dra7xx_powerdomains_init();
 	dra7xx_clockdomains_init();
 	dra7xx_hwmod_init();

arch/arm/mach-omap2/omap2-restart.c

@@ -15,7 +15,7 @@
 
 #include "soc.h"
 #include "common.h"
-#include "prm2xxx.h"
+#include "prm.h"
 
 /*
  * reset_virt_prcm_set_ck, reset_sys_ck: pointers to the virt_prcm_set
@@ -40,8 +40,7 @@ void omap2xxx_restart(enum reboot_mode mode, const char *cmd)
 
 	/* XXX Should save the cmd argument for use after the reboot */
 
-	omap2xxx_prm_dpll_reset(); /* never returns */
-	while (1);
+	omap_prm_reset_system();
 }
 
 /**

arch/arm/mach-omap2/omap3-restart.c

@@ -14,10 +14,8 @@
 #include <linux/init.h>
 #include <linux/reboot.h>
 
-#include "iomap.h"
-#include "common.h"
 #include "control.h"
-#include "prm3xxx.h"
+#include "prm.h"
 
 /* Global address base setup code */
 
@@ -32,6 +30,5 @@
 void omap3xxx_restart(enum reboot_mode mode, const char *cmd)
 {
 	omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0));
-	omap3xxx_prm_dpll3_reset(); /* never returns */
-	while (1);
+	omap_prm_reset_system();
 }

arch/arm/mach-omap2/omap4-restart.c

@@ -9,7 +9,7 @@
 
 #include <linux/types.h>
 #include <linux/reboot.h>
-#include "prminst44xx.h"
+#include "prm.h"
 
 /**
  * omap44xx_restart - trigger a software restart of the SoC
@@ -22,7 +22,5 @@
 void omap44xx_restart(enum reboot_mode mode, const char *cmd)
 {
 	/* XXX Should save 'cmd' into scratchpad for use after reboot */
-	omap4_prminst_global_warm_sw_reset(); /* never returns */
-	while (1)
-		;
+	omap_prm_reset_system();
 }

arch/arm/mach-omap2/prm.h

@@ -29,6 +29,7 @@ int of_prcm_init(void);
  * PRM_HAS_VOLTAGE: has voltage domains
  */
 #define PRM_HAS_IO_WAKEUP	(1 << 0)
+#define PRM_HAS_VOLTAGE		(1 << 1)
 
 /*
  * MAX_MODULE_SOFTRESET_WAIT: Maximum microseconds to wait for OMAP
@@ -127,6 +128,8 @@ struct prm_reset_src_map {
  * @was_any_context_lost_old: ptr to the SoC PRM context loss test fn
  * @clear_context_loss_flags_old: ptr to the SoC PRM context loss flag clear fn
  * @late_init: ptr to the late init function
+ * @assert_hardreset: ptr to the SoC PRM hardreset assert impl
+ * @deassert_hardreset: ptr to the SoC PRM hardreset deassert impl
  *
  * XXX @was_any_context_lost_old and @clear_context_loss_flags_old are
  * deprecated.
@@ -136,14 +139,27 @@ struct prm_ll_data {
 	bool (*was_any_context_lost_old)(u8 part, s16 inst, u16 idx);
 	void (*clear_context_loss_flags_old)(u8 part, s16 inst, u16 idx);
 	int (*late_init)(void);
+	int (*assert_hardreset)(u8 shift, u8 part, s16 prm_mod, u16 offset);
+	int (*deassert_hardreset)(u8 shift, u8 st_shift, u8 part, s16 prm_mod,
+				  u16 offset, u16 st_offset);
+	int (*is_hardreset_asserted)(u8 shift, u8 part, s16 prm_mod,
+				     u16 offset);
+	void (*reset_system)(void);
 };
 
 extern int prm_register(struct prm_ll_data *pld);
 extern int prm_unregister(struct prm_ll_data *pld);
 
+int omap_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset);
+int omap_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 prm_mod,
+				u16 offset, u16 st_offset);
+int omap_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset);
 extern u32 prm_read_reset_sources(void);
 extern bool prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx);
 extern void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx);
+void omap_prm_reset_system(void);
+
+void omap_prm_reconfigure_io_chain(void);
 
 #endif
 

arch/arm/mach-omap2/prm2xxx.c

@@ -106,7 +106,7 @@ static int omap2xxx_pwrst_to_common_pwrst(u8 omap2xxx_pwrst)
  * Set the DPLL reset bit, which should reboot the SoC.  This is the
  * recommended way to restart the SoC.  No return value.
  */
-void omap2xxx_prm_dpll_reset(void)
+static void omap2xxx_prm_dpll_reset(void)
 {
 	omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, WKUP_MOD,
 				   OMAP2_RM_RSTCTRL);
@@ -212,6 +212,10 @@ struct pwrdm_ops omap2_pwrdm_operations = {
 
 static struct prm_ll_data omap2xxx_prm_ll_data = {
 	.read_reset_sources = &omap2xxx_prm_read_reset_sources,
+	.assert_hardreset = &omap2_prm_assert_hardreset,
+	.deassert_hardreset = &omap2_prm_deassert_hardreset,
+	.is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
+	.reset_system = &omap2xxx_prm_dpll_reset,
 };
 
 int __init omap2xxx_prm_init(void)

arch/arm/mach-omap2/prm2xxx.h

@@ -124,7 +124,6 @@
 extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
 extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
 
-extern void omap2xxx_prm_dpll_reset(void);
 void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
 
 extern int __init omap2xxx_prm_init(void);

arch/arm/mach-omap2/prm2xxx_3xxx.c

@@ -24,14 +24,16 @@
 /**
  * omap2_prm_is_hardreset_asserted - read the HW reset line state of
  * submodules contained in the hwmod module
- * @prm_mod: PRM submodule base (e.g. CORE_MOD)
  * @shift: register bit shift corresponding to the reset line to check
+ * @part: PRM partition, ignored for OMAP2
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @offset: register offset, ignored for OMAP2
  *
  * Returns 1 if the (sub)module hardreset line is currently asserted,
  * 0 if the (sub)module hardreset line is not currently asserted, or
  * -EINVAL if called while running on a non-OMAP2/3 chip.
  */
-int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
+int omap2_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset)
 {
 	return omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL,
 				       (1 << shift));
@@ -39,8 +41,10 @@ int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
 
 /**
  * omap2_prm_assert_hardreset - assert the HW reset line of a submodule
- * @prm_mod: PRM submodule base (e.g. CORE_MOD)
  * @shift: register bit shift corresponding to the reset line to assert
+ * @part: PRM partition, ignored for OMAP2
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @offset: register offset, ignored for OMAP2
  *
  * Some IPs like dsp or iva contain processors that require an HW
  * reset line to be asserted / deasserted in order to fully enable the
@@ -49,7 +53,7 @@ int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
  * place the submodule into reset.  Returns 0 upon success or -EINVAL
  * upon an argument error.
  */
-int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
+int omap2_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset)
 {
 	u32 mask;
 
@@ -64,6 +68,10 @@ int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
  * @prm_mod: PRM submodule base (e.g. CORE_MOD)
  * @rst_shift: register bit shift corresponding to the reset line to deassert
  * @st_shift: register bit shift for the status of the deasserted submodule
+ * @part: PRM partition, not used for OMAP2
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @rst_offset: reset register offset, not used for OMAP2
+ * @st_offset: reset status register offset, not used for OMAP2
  *
  * Some IPs like dsp or iva contain processors that require an HW
  * reset line to be asserted / deasserted in order to fully enable the
@@ -74,7 +82,8 @@ int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
  * -EINVAL upon an argument error, -EEXIST if the submodule was already out
  * of reset, or -EBUSY if the submodule did not exit reset promptly.
  */
-int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift)
+int omap2_prm_deassert_hardreset(u8 rst_shift, u8 st_shift, u8 part,
+				 s16 prm_mod, u16 rst_offset, u16 st_offset)
 {
 	u32 rst, st;
 	int c;

arch/arm/mach-omap2/prm2xxx_3xxx.h

@@ -100,9 +100,12 @@ static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 }
 
 /* These omap2_ PRM functions apply to both OMAP2 and 3 */
-extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
-extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
-extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift);
+int omap2_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset);
+int omap2_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod,
+			       u16 offset);
+int omap2_prm_deassert_hardreset(u8 rst_shift, u8 st_shift, u8 part,
+				 s16 prm_mod, u16 reset_offset,
+				 u16 st_offset);
 
 extern int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
 extern int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm);

arch/arm/mach-omap2/prm33xx.c

@@ -23,20 +23,24 @@
 #include "prm33xx.h"
 #include "prm-regbits-33xx.h"
 
+#define AM33XX_PRM_RSTCTRL_OFFSET		0x0000
+
+#define AM33XX_RST_GLOBAL_WARM_SW_MASK		(1 << 0)
+
 /* Read a register in a PRM instance */
-u32 am33xx_prm_read_reg(s16 inst, u16 idx)
+static u32 am33xx_prm_read_reg(s16 inst, u16 idx)
 {
 	return readl_relaxed(prm_base + inst + idx);
 }
 
 /* Write into a register in a PRM instance */
-void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx)
+static void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx)
 {
 	writel_relaxed(val, prm_base + inst + idx);
 }
 
 /* Read-modify-write a register in PRM. Caller must lock */
-u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
+static u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
 {
 	u32 v;
 
@@ -52,6 +56,7 @@ u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
  * am33xx_prm_is_hardreset_asserted - read the HW reset line state of
  * submodules contained in the hwmod module
  * @shift: register bit shift corresponding to the reset line to check
+ * @part: PRM partition, ignored for AM33xx
  * @inst: CM instance register offset (*_INST macro)
  * @rstctrl_offs: RM_RSTCTRL register address offset for this module
  *
@@ -59,7 +64,8 @@ u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
  * 0 if the (sub)module hardreset line is not currently asserted, or
  * -EINVAL upon parameter error.
  */
-int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, u16 rstctrl_offs)
+static int am33xx_prm_is_hardreset_asserted(u8 shift, u8 part, s16 inst,
+					    u16 rstctrl_offs)
 {
 	u32 v;
 
@@ -73,6 +79,7 @@ int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, u16 rstctrl_offs)
 /**
  * am33xx_prm_assert_hardreset - assert the HW reset line of a submodule
  * @shift: register bit shift corresponding to the reset line to assert
+ * @part: CM partition, ignored for AM33xx
  * @inst: CM instance register offset (*_INST macro)
  * @rstctrl_reg: RM_RSTCTRL register address for this module
  *
@@ -83,7 +90,8 @@ int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, u16 rstctrl_offs)
  * place the submodule into reset.  Returns 0 upon success or -EINVAL
  * upon an argument error.
  */
-int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs)
+static int am33xx_prm_assert_hardreset(u8 shift, u8 part, s16 inst,
+				       u16 rstctrl_offs)
 {
 	u32 mask = 1 << shift;
 
@@ -96,6 +104,8 @@ int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs)
  * am33xx_prm_deassert_hardreset - deassert a submodule hardreset line and
  * wait
  * @shift: register bit shift corresponding to the reset line to deassert
+ * @st_shift: reset status register bit shift corresponding to the reset line
+ * @part: PRM partition, not used for AM33xx
  * @inst: CM instance register offset (*_INST macro)
  * @rstctrl_reg: RM_RSTCTRL register address for this module
  * @rstst_reg: RM_RSTST register address for this module
@@ -109,14 +119,15 @@ int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs)
  * -EINVAL upon an argument error, -EEXIST if the submodule was already out
  * of reset, or -EBUSY if the submodule did not exit reset promptly.
  */
-int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, s16 inst,
-		u16 rstctrl_offs, u16 rstst_offs)
+static int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part,
+					 s16 inst, u16 rstctrl_offs,
+					 u16 rstst_offs)
 {
 	int c;
 	u32 mask = 1 << st_shift;
 
 	/* Check the current status to avoid  de-asserting the line twice */
-	if (am33xx_prm_is_hardreset_asserted(shift, inst, rstctrl_offs) == 0)
+	if (am33xx_prm_is_hardreset_asserted(shift, 0, inst, rstctrl_offs) == 0)
 		return -EEXIST;
 
 	/* Clear the reset status by writing 1 to the status bit */
@@ -128,7 +139,7 @@ int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, s16 inst,
 	am33xx_prm_rmw_reg_bits(mask, 0, inst, rstctrl_offs);
 
 	/* wait the status to be set */
-	omap_test_timeout(am33xx_prm_is_hardreset_asserted(st_shift, inst,
+	omap_test_timeout(am33xx_prm_is_hardreset_asserted(st_shift, 0, inst,
 							   rstst_offs),
 			  MAX_MODULE_HARDRESET_WAIT, c);
 
@@ -325,6 +336,23 @@ static int am33xx_check_vcvp(void)
 	return 0;
 }
 
+/**
+ * am33xx_prm_global_warm_sw_reset - reboot the device via warm reset
+ *
+ * Immediately reboots the device through warm reset.
+ */
+static void am33xx_prm_global_warm_sw_reset(void)
+{
+	am33xx_prm_rmw_reg_bits(AM33XX_RST_GLOBAL_WARM_SW_MASK,
+				AM33XX_RST_GLOBAL_WARM_SW_MASK,
+				AM33XX_PRM_DEVICE_MOD,
+				AM33XX_PRM_RSTCTRL_OFFSET);
+
+	/* OCP barrier */
+	(void)am33xx_prm_read_reg(AM33XX_PRM_DEVICE_MOD,
+				  AM33XX_PRM_RSTCTRL_OFFSET);
+}
+
 struct pwrdm_ops am33xx_pwrdm_operations = {
 	.pwrdm_set_next_pwrst		= am33xx_pwrdm_set_next_pwrst,
 	.pwrdm_read_next_pwrst		= am33xx_pwrdm_read_next_pwrst,
@@ -342,3 +370,21 @@ struct pwrdm_ops am33xx_pwrdm_operations = {
 	.pwrdm_wait_transition		= am33xx_pwrdm_wait_transition,
 	.pwrdm_has_voltdm		= am33xx_check_vcvp,
 };
+
+static struct prm_ll_data am33xx_prm_ll_data = {
+	.assert_hardreset		= am33xx_prm_assert_hardreset,
+	.deassert_hardreset		= am33xx_prm_deassert_hardreset,
+	.is_hardreset_asserted		= am33xx_prm_is_hardreset_asserted,
+	.reset_system			= am33xx_prm_global_warm_sw_reset,
+};
+
+int __init am33xx_prm_init(void)
+{
+	return prm_register(&am33xx_prm_ll_data);
+}
+
+static void __exit am33xx_prm_exit(void)
+{
+	prm_unregister(&am33xx_prm_ll_data);
+}
+__exitcall(am33xx_prm_exit);

arch/arm/mach-omap2/prm33xx.h

@@ -118,14 +118,7 @@
 #define AM33XX_PM_CEFUSE_PWRSTST		AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0004)
 
 #ifndef __ASSEMBLER__
-extern u32 am33xx_prm_read_reg(s16 inst, u16 idx);
-extern void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx);
-extern u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
-extern void am33xx_prm_global_warm_sw_reset(void);
-extern int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst,
-		u16 rstctrl_offs);
-extern int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs);
-extern int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, s16 inst,
-		u16 rstctrl_offs, u16 rstst_offs);
+int am33xx_prm_init(void);
+
 #endif /* ASSEMBLER */
 #endif

arch/arm/mach-omap2/prm3xxx.c

@@ -30,6 +30,11 @@
 #include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
 
+static void omap3xxx_prm_read_pending_irqs(unsigned long *events);
+static void omap3xxx_prm_ocp_barrier(void);
+static void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
+static void omap3xxx_prm_restore_irqen(u32 *saved_mask);
+
 static const struct omap_prcm_irq omap3_prcm_irqs[] = {
 	OMAP_PRCM_IRQ("wkup",	0,	0),
 	OMAP_PRCM_IRQ("io",	9,	1),
@@ -131,7 +136,7 @@ u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
  * recommended way to restart the SoC, considering Errata i520.  No
  * return value.
  */
-void omap3xxx_prm_dpll3_reset(void)
+static void omap3xxx_prm_dpll3_reset(void)
 {
 	omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, OMAP3430_GR_MOD,
 				   OMAP2_RM_RSTCTRL);
@@ -147,7 +152,7 @@ void omap3xxx_prm_dpll3_reset(void)
  * MPU IRQs, and store the result into the u32 pointed to by @events.
  * No return value.
  */
-void omap3xxx_prm_read_pending_irqs(unsigned long *events)
+static void omap3xxx_prm_read_pending_irqs(unsigned long *events)
 {
 	u32 mask, st;
 
@@ -166,7 +171,7 @@ void omap3xxx_prm_read_pending_irqs(unsigned long *events)
  * block, to avoid race conditions after acknowledging or clearing IRQ
  * bits.  No return value.
  */
-void omap3xxx_prm_ocp_barrier(void)
+static void omap3xxx_prm_ocp_barrier(void)
 {
 	omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
 }
@@ -182,7 +187,7 @@ void omap3xxx_prm_ocp_barrier(void)
  * returning; otherwise, spurious interrupts might occur.  No return
  * value.
  */
-void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
+static void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
 {
 	saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
 					       OMAP3_PRM_IRQENABLE_MPU_OFFSET);
@@ -202,7 +207,7 @@ void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
  * barrier should be needed here; any pending PRM interrupts will fire
  * once the writes reach the PRM.  No return value.
  */
-void omap3xxx_prm_restore_irqen(u32 *saved_mask)
+static void omap3xxx_prm_restore_irqen(u32 *saved_mask)
 {
 	omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
 				OMAP3_PRM_IRQENABLE_MPU_OFFSET);
@@ -375,7 +380,7 @@ void __init omap3_prm_init_pm(bool has_uart4, bool has_iva)
  * The ST_IO_CHAIN bit does not exist in 3430 before es3.1. The only
  * thing we can do is toggle EN_IO bit for earlier omaps.
  */
-void omap3430_pre_es3_1_reconfigure_io_chain(void)
+static void omap3430_pre_es3_1_reconfigure_io_chain(void)
 {
 	omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
 				     PM_WKEN);
@@ -393,7 +398,7 @@ void omap3430_pre_es3_1_reconfigure_io_chain(void)
  * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit.  No
  * return value. These registers are only available in 3430 es3.1 and later.
  */
-void omap3_prm_reconfigure_io_chain(void)
+static void omap3_prm_reconfigure_io_chain(void)
 {
 	int i = 0;
 
@@ -415,15 +420,6 @@ void omap3_prm_reconfigure_io_chain(void)
 	omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
 }
 
-/**
- * omap3xxx_prm_reconfigure_io_chain - reconfigure I/O chain
- */
-void omap3xxx_prm_reconfigure_io_chain(void)
-{
-	if (omap3_prcm_irq_setup.reconfigure_io_chain)
-		omap3_prcm_irq_setup.reconfigure_io_chain();
-}
-
 /**
  * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
  *
@@ -664,6 +660,10 @@ static int omap3xxx_prm_late_init(void);
 static struct prm_ll_data omap3xxx_prm_ll_data = {
 	.read_reset_sources = &omap3xxx_prm_read_reset_sources,
 	.late_init = &omap3xxx_prm_late_init,
+	.assert_hardreset = &omap2_prm_assert_hardreset,
+	.deassert_hardreset = &omap2_prm_deassert_hardreset,
+	.is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
+	.reset_system = &omap3xxx_prm_dpll3_reset,
 };
 
 int __init omap3xxx_prm_init(void)

arch/arm/mach-omap2/prm3xxx.h

@@ -144,22 +144,6 @@ extern u32 omap3_prm_vcvp_read(u8 offset);
 extern void omap3_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
-#ifdef CONFIG_ARCH_OMAP3
-void omap3xxx_prm_reconfigure_io_chain(void);
-#else
-static inline void omap3xxx_prm_reconfigure_io_chain(void)
-{
-}
-#endif
-
-/* PRM interrupt-related functions */
-extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
-extern void omap3xxx_prm_ocp_barrier(void);
-extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
-extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
-
-extern void omap3xxx_prm_dpll3_reset(void);
-
 extern int __init omap3xxx_prm_init(void);
 extern u32 omap3xxx_prm_get_reset_sources(void);
 int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);

arch/arm/mach-omap2/prm44xx.c

@@ -32,6 +32,12 @@
 
 /* Static data */
 
+static void omap44xx_prm_read_pending_irqs(unsigned long *events);
+static void omap44xx_prm_ocp_barrier(void);
+static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask);
+static void omap44xx_prm_restore_irqen(u32 *saved_mask);
+static void omap44xx_prm_reconfigure_io_chain(void);
+
 static const struct omap_prcm_irq omap4_prcm_irqs[] = {
 	OMAP_PRCM_IRQ("io",     9,      1),
 };
@@ -80,19 +86,19 @@ static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = {
 /* PRM low-level functions */
 
 /* Read a register in a CM/PRM instance in the PRM module */
-u32 omap4_prm_read_inst_reg(s16 inst, u16 reg)
+static u32 omap4_prm_read_inst_reg(s16 inst, u16 reg)
 {
 	return readl_relaxed(prm_base + inst + reg);
 }
 
 /* Write into a register in a CM/PRM instance in the PRM module */
-void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg)
+static void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg)
 {
 	writel_relaxed(val, prm_base + inst + reg);
 }
 
 /* Read-modify-write a register in a PRM module. Caller must lock */
-u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg)
+static u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg)
 {
 	u32 v;
 
@@ -207,7 +213,7 @@ static inline u32 _read_pending_irq_reg(u16 irqen_offs, u16 irqst_offs)
  * MPU IRQs, and store the result into the two u32s pointed to by @events.
  * No return value.
  */
-void omap44xx_prm_read_pending_irqs(unsigned long *events)
+static void omap44xx_prm_read_pending_irqs(unsigned long *events)
 {
 	events[0] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_OFFSET,
 					  OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
@@ -224,7 +230,7 @@ void omap44xx_prm_read_pending_irqs(unsigned long *events)
  * block, to avoid race conditions after acknowledging or clearing IRQ
  * bits.  No return value.
  */
-void omap44xx_prm_ocp_barrier(void)
+static void omap44xx_prm_ocp_barrier(void)
 {
 	omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
 				OMAP4_REVISION_PRM_OFFSET);
@@ -241,7 +247,7 @@ void omap44xx_prm_ocp_barrier(void)
  * interrupts reaches the PRM before returning; otherwise, spurious
  * interrupts might occur.  No return value.
  */
-void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
+static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
 {
 	saved_mask[0] =
 		omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
@@ -270,7 +276,7 @@ void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
  * No OCP barrier should be needed here; any pending PRM interrupts will fire
  * once the writes reach the PRM.  No return value.
  */
-void omap44xx_prm_restore_irqen(u32 *saved_mask)
+static void omap44xx_prm_restore_irqen(u32 *saved_mask)
 {
 	omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_OCP_SOCKET_INST,
 				 OMAP4_PRM_IRQENABLE_MPU_OFFSET);
@@ -287,7 +293,7 @@ void omap44xx_prm_restore_irqen(u32 *saved_mask)
  * deasserting WUCLKIN and waiting for WUCLKOUT to be deasserted.
  * No return value. XXX Are the final two steps necessary?
  */
-void omap44xx_prm_reconfigure_io_chain(void)
+static void omap44xx_prm_reconfigure_io_chain(void)
 {
 	int i = 0;
 	s32 inst = omap4_prmst_get_prm_dev_inst();
@@ -652,11 +658,10 @@ static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
 
 static int omap4_check_vcvp(void)
 {
-	/* No VC/VP on dra7xx devices */
-	if (soc_is_dra7xx())
-		return 0;
+	if (prm_features & PRM_HAS_VOLTAGE)
+		return 1;
 
-	return 1;
+	return 0;
 }
 
 struct pwrdm_ops omap4_pwrdm_operations = {
@@ -689,6 +694,10 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
 	.was_any_context_lost_old = &omap44xx_prm_was_any_context_lost_old,
 	.clear_context_loss_flags_old = &omap44xx_prm_clear_context_loss_flags_old,
 	.late_init = &omap44xx_prm_late_init,
+	.assert_hardreset	= omap4_prminst_assert_hardreset,
+	.deassert_hardreset	= omap4_prminst_deassert_hardreset,
+	.is_hardreset_asserted	= omap4_prminst_is_hardreset_asserted,
+	.reset_system		= omap4_prminst_global_warm_sw_reset,
 };
 
 int __init omap44xx_prm_init(void)
@@ -696,6 +705,9 @@ int __init omap44xx_prm_init(void)
 	if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx())
 		prm_features |= PRM_HAS_IO_WAKEUP;
 
+	if (!soc_is_dra7xx())
+		prm_features |= PRM_HAS_VOLTAGE;
+
 	return prm_register(&omap44xx_prm_ll_data);
 }
 

arch/arm/mach-omap2/prm44xx_54xx.h

@@ -26,10 +26,6 @@
 /* Function prototypes */
 #ifndef __ASSEMBLER__
 
-extern u32 omap4_prm_read_inst_reg(s16 inst, u16 idx);
-extern void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 idx);
-extern u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
-
 /* OMAP4/OMAP5-specific VP functions */
 u32 omap4_prm_vp_check_txdone(u8 vp_id);
 void omap4_prm_vp_clear_txdone(u8 vp_id);
@@ -42,21 +38,6 @@ extern u32 omap4_prm_vcvp_read(u8 offset);
 extern void omap4_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
-	defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
-void omap44xx_prm_reconfigure_io_chain(void);
-#else
-static inline void omap44xx_prm_reconfigure_io_chain(void)
-{
-}
-#endif
-
-/* PRM interrupt-related functions */
-extern void omap44xx_prm_read_pending_irqs(unsigned long *events);
-extern void omap44xx_prm_ocp_barrier(void);
-extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask);
-extern void omap44xx_prm_restore_irqen(u32 *saved_mask);
-
 extern int __init omap44xx_prm_init(void);
 extern u32 omap44xx_prm_get_reset_sources(void);
 

arch/arm/mach-omap2/prm_common.c

@@ -422,6 +422,105 @@ void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx)
 			  __func__);
 }
 
+/**
+ * omap_prm_assert_hardreset - assert hardreset for an IP block
+ * @shift: register bit shift corresponding to the reset line
+ * @part: PRM partition
+ * @prm_mod: PRM submodule base or instance offset
+ * @offset: register offset
+ *
+ * Asserts a hardware reset line for an IP block.
+ */
+int omap_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset)
+{
+	if (!prm_ll_data->assert_hardreset) {
+		WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+			  __func__);
+		return -EINVAL;
+	}
+
+	return prm_ll_data->assert_hardreset(shift, part, prm_mod, offset);
+}
+
+/**
+ * omap_prm_deassert_hardreset - deassert hardreset for an IP block
+ * @shift: register bit shift corresponding to the reset line
+ * @st_shift: reset status bit shift corresponding to the reset line
+ * @part: PRM partition
+ * @prm_mod: PRM submodule base or instance offset
+ * @offset: register offset
+ * @st_offset: status register offset
+ *
+ * Deasserts a hardware reset line for an IP block.
+ */
+int omap_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 prm_mod,
+				u16 offset, u16 st_offset)
+{
+	if (!prm_ll_data->deassert_hardreset) {
+		WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+			  __func__);
+		return -EINVAL;
+	}
+
+	return prm_ll_data->deassert_hardreset(shift, st_shift, part, prm_mod,
+					       offset, st_offset);
+}
+
+/**
+ * omap_prm_is_hardreset_asserted - check the hardreset status for an IP block
+ * @shift: register bit shift corresponding to the reset line
+ * @part: PRM partition
+ * @prm_mod: PRM submodule base or instance offset
+ * @offset: register offset
+ *
+ * Checks if a hardware reset line for an IP block is enabled or not.
+ */
+int omap_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset)
+{
+	if (!prm_ll_data->is_hardreset_asserted) {
+		WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+			  __func__);
+		return -EINVAL;
+	}
+
+	return prm_ll_data->is_hardreset_asserted(shift, part, prm_mod, offset);
+}
+
+/**
+ * omap_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
+ *
+ * Clear any previously-latched I/O wakeup events and ensure that the
+ * I/O wakeup gates are aligned with the current mux settings.
+ * Calls SoC specific I/O chain reconfigure function if available,
+ * otherwise does nothing.
+ */
+void omap_prm_reconfigure_io_chain(void)
+{
+	if (!prcm_irq_setup || !prcm_irq_setup->reconfigure_io_chain)
+		return;
+
+	prcm_irq_setup->reconfigure_io_chain();
+}
+
+/**
+ * omap_prm_reset_system - trigger global SW reset
+ *
+ * Triggers SoC specific global warm reset to reboot the device.
+ */
+void omap_prm_reset_system(void)
+{
+	if (!prm_ll_data->reset_system) {
+		WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+			  __func__);
+		return;
+	}
+
+	prm_ll_data->reset_system();
+
+	while (1)
+		cpu_relax();
+}
+
 /**
  * prm_register - register per-SoC low-level data with the PRM
  * @pld: low-level per-SoC OMAP PRM data & function pointers to register

arch/arm/mach-omap2/prminst44xx.c

@@ -148,8 +148,12 @@ int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
 /**
  * omap4_prminst_deassert_hardreset - deassert a submodule hardreset line and
  * wait
- * @rstctrl_reg: RM_RSTCTRL register address for this module
  * @shift: register bit shift corresponding to the reset line to deassert
+ * @st_shift: status bit offset, not used for OMAP4+
+ * @part: PRM partition
+ * @inst: PRM instance offset
+ * @rstctrl_offs: reset register offset
+ * @st_offs: reset status register offset, not used for OMAP4+
  *
  * Some IPs like dsp, ipu or iva contain processors that require an HW
  * reset line to be asserted / deasserted in order to fully enable the
@@ -160,8 +164,8 @@ int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
  * -EINVAL upon an argument error, -EEXIST if the submodule was already out
  * of reset, or -EBUSY if the submodule did not exit reset promptly.
  */
-int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst,
-				     u16 rstctrl_offs)
+int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 inst,
+				     u16 rstctrl_offs, u16 st_offs)
 {
 	int c;
 	u32 mask = 1 << shift;

arch/arm/mach-omap2/prminst44xx.h

@@ -30,8 +30,9 @@ extern int omap4_prminst_is_hardreset_asserted(u8 shift, u8 part, s16 inst,
 					       u16 rstctrl_offs);
 extern int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
 					  u16 rstctrl_offs);
-extern int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst,
-					    u16 rstctrl_offs);
+int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part,
+				     s16 inst, u16 rstctrl_offs,
+				     u16 rstst_offs);
 
 extern void omap_prm_base_init(void);