Commit 381ddfe4 authored by Laurent Pinchart's avatar Laurent Pinchart

drm: rcar-du: Hardcode encoders types to DRM_MODE_ENCODER_NONE

Unlike the connector type, the encoder type is unused by userspace. As
it is equally unused in the driver, except in a single location where
the connector type can be used instead, hardcode it to
DRM_MODE_ENCODER_NONE. This allow removing all code that tries to
determine (unsuccessfully in case a bridge is used) the encoder type.
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
parent 5c602531
......@@ -44,12 +44,10 @@ static const struct rcar_du_device_info rcar_du_r8a7779_info = {
*/
[RCAR_DU_OUTPUT_DPAD0] = {
.possible_crtcs = BIT(0),
.encoder_type = DRM_MODE_ENCODER_NONE,
.port = 0,
},
[RCAR_DU_OUTPUT_DPAD1] = {
.possible_crtcs = BIT(1) | BIT(0),
.encoder_type = DRM_MODE_ENCODER_NONE,
.port = 1,
},
},
......@@ -68,17 +66,14 @@ static const struct rcar_du_device_info rcar_du_r8a7790_info = {
*/
[RCAR_DU_OUTPUT_DPAD0] = {
.possible_crtcs = BIT(2) | BIT(1) | BIT(0),
.encoder_type = DRM_MODE_ENCODER_NONE,
.port = 0,
},
[RCAR_DU_OUTPUT_LVDS0] = {
.possible_crtcs = BIT(0),
.encoder_type = DRM_MODE_ENCODER_LVDS,
.port = 1,
},
[RCAR_DU_OUTPUT_LVDS1] = {
.possible_crtcs = BIT(2) | BIT(1),
.encoder_type = DRM_MODE_ENCODER_LVDS,
.port = 2,
},
},
......@@ -97,12 +92,10 @@ static const struct rcar_du_device_info rcar_du_r8a7791_info = {
*/
[RCAR_DU_OUTPUT_DPAD0] = {
.possible_crtcs = BIT(1) | BIT(0),
.encoder_type = DRM_MODE_ENCODER_NONE,
.port = 0,
},
[RCAR_DU_OUTPUT_LVDS0] = {
.possible_crtcs = BIT(0),
.encoder_type = DRM_MODE_ENCODER_LVDS,
.port = 1,
},
},
......@@ -118,12 +111,10 @@ static const struct rcar_du_device_info rcar_du_r8a7792_info = {
/* R8A7792 has two RGB outputs. */
[RCAR_DU_OUTPUT_DPAD0] = {
.possible_crtcs = BIT(0),
.encoder_type = DRM_MODE_ENCODER_NONE,
.port = 0,
},
[RCAR_DU_OUTPUT_DPAD1] = {
.possible_crtcs = BIT(1),
.encoder_type = DRM_MODE_ENCODER_NONE,
.port = 1,
},
},
......@@ -141,12 +132,10 @@ static const struct rcar_du_device_info rcar_du_r8a7794_info = {
*/
[RCAR_DU_OUTPUT_DPAD0] = {
.possible_crtcs = BIT(0),
.encoder_type = DRM_MODE_ENCODER_NONE,
.port = 0,
},
[RCAR_DU_OUTPUT_DPAD1] = {
.possible_crtcs = BIT(1),
.encoder_type = DRM_MODE_ENCODER_NONE,
.port = 1,
},
},
......@@ -165,12 +154,10 @@ static const struct rcar_du_device_info rcar_du_r8a7795_info = {
*/
[RCAR_DU_OUTPUT_DPAD0] = {
.possible_crtcs = BIT(3),
.encoder_type = DRM_MODE_ENCODER_NONE,
.port = 0,
},
[RCAR_DU_OUTPUT_LVDS0] = {
.possible_crtcs = BIT(0),
.encoder_type = DRM_MODE_ENCODER_LVDS,
.port = 3,
},
},
......@@ -189,12 +176,10 @@ static const struct rcar_du_device_info rcar_du_r8a7796_info = {
*/
[RCAR_DU_OUTPUT_DPAD0] = {
.possible_crtcs = BIT(2),
.encoder_type = DRM_MODE_ENCODER_NONE,
.port = 0,
},
[RCAR_DU_OUTPUT_LVDS0] = {
.possible_crtcs = BIT(0),
.encoder_type = DRM_MODE_ENCODER_LVDS,
.port = 2,
},
},
......
......@@ -38,7 +38,6 @@ struct rcar_du_lvdsenc;
/*
* struct rcar_du_output_routing - Output routing specification
* @possible_crtcs: bitmask of possible CRTCs for the output
* @encoder_type: DRM type of the internal encoder associated with the output
* @port: device tree port number corresponding to this output route
*
* The DU has 5 possible outputs (DPAD0/1, LVDS0/1, TCON). Output routing data
......@@ -47,7 +46,6 @@ struct rcar_du_lvdsenc;
*/
struct rcar_du_output_routing {
unsigned int possible_crtcs;
unsigned int encoder_type;
unsigned int port;
};
......
......@@ -68,7 +68,7 @@ static int rcar_du_encoder_atomic_check(struct drm_encoder *encoder,
* Only panel-related encoder types require validation here, everything
* else is handled by the bridge drivers.
*/
if (encoder->encoder_type == DRM_MODE_ENCODER_LVDS) {
if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS) {
const struct drm_display_mode *panel_mode;
if (list_empty(&connector->modes)) {
......@@ -156,7 +156,6 @@ static const struct drm_encoder_funcs encoder_funcs = {
};
int rcar_du_encoder_init(struct rcar_du_device *rcdu,
enum rcar_du_encoder_type type,
enum rcar_du_output output,
struct device_node *enc_node,
struct device_node *con_node)
......@@ -164,7 +163,6 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
struct rcar_du_encoder *renc;
struct drm_encoder *encoder;
struct drm_bridge *bridge = NULL;
unsigned int encoder_type;
int ret;
renc = devm_kzalloc(rcdu->dev, sizeof(*renc), GFP_KERNEL);
......@@ -188,33 +186,23 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
}
if (enc_node) {
dev_dbg(rcdu->dev, "initializing encoder %s for output %u\n",
of_node_full_name(enc_node), output);
/* Locate the DRM bridge from the encoder DT node. */
bridge = of_drm_find_bridge(enc_node);
if (!bridge) {
ret = -EPROBE_DEFER;
goto done;
}
}
switch (type) {
case RCAR_DU_ENCODER_VGA:
encoder_type = DRM_MODE_ENCODER_DAC;
break;
case RCAR_DU_ENCODER_LVDS:
encoder_type = DRM_MODE_ENCODER_LVDS;
break;
case RCAR_DU_ENCODER_HDMI:
encoder_type = DRM_MODE_ENCODER_TMDS;
break;
case RCAR_DU_ENCODER_NONE:
default:
/* No external encoder, use the internal encoder type. */
encoder_type = rcdu->info->routes[output].encoder_type;
break;
} else {
dev_dbg(rcdu->dev,
"initializing internal encoder for output %u\n",
output);
}
ret = drm_encoder_init(rcdu->ddev, encoder, &encoder_funcs,
encoder_type, NULL);
DRM_MODE_ENCODER_NONE, NULL);
if (ret < 0)
goto done;
......
......@@ -21,14 +21,6 @@ struct drm_panel;
struct rcar_du_device;
struct rcar_du_lvdsenc;
enum rcar_du_encoder_type {
RCAR_DU_ENCODER_UNUSED = 0,
RCAR_DU_ENCODER_NONE,
RCAR_DU_ENCODER_VGA,
RCAR_DU_ENCODER_LVDS,
RCAR_DU_ENCODER_HDMI,
};
struct rcar_du_encoder {
struct drm_encoder base;
enum rcar_du_output output;
......@@ -51,7 +43,6 @@ struct rcar_du_connector {
container_of(c, struct rcar_du_connector, connector)
int rcar_du_encoder_init(struct rcar_du_device *rcdu,
enum rcar_du_encoder_type type,
enum rcar_du_output output,
struct device_node *enc_node,
struct device_node *con_node);
......
......@@ -284,16 +284,6 @@ static int rcar_du_encoders_init_one(struct rcar_du_device *rcdu,
enum rcar_du_output output,
struct of_endpoint *ep)
{
static const struct {
const char *compatible;
enum rcar_du_encoder_type type;
} encoders[] = {
{ "adi,adv7123", RCAR_DU_ENCODER_VGA },
{ "adi,adv7511w", RCAR_DU_ENCODER_HDMI },
{ "thine,thc63lvdm83d", RCAR_DU_ENCODER_LVDS },
};
enum rcar_du_encoder_type enc_type = RCAR_DU_ENCODER_NONE;
struct device_node *connector = NULL;
struct device_node *encoder = NULL;
struct device_node *ep_node = NULL;
......@@ -340,30 +330,7 @@ static int rcar_du_encoders_init_one(struct rcar_du_device *rcdu,
of_node_put(entity_ep_node);
if (encoder) {
/*
* If an encoder has been found, get its type based on its
* compatible string.
*/
unsigned int i;
for (i = 0; i < ARRAY_SIZE(encoders); ++i) {
if (of_device_is_compatible(encoder,
encoders[i].compatible)) {
enc_type = encoders[i].type;
break;
}
}
if (i == ARRAY_SIZE(encoders)) {
dev_warn(rcdu->dev,
"unknown encoder type for %s, skipping\n",
encoder->full_name);
of_node_put(encoder);
of_node_put(connector);
return -EINVAL;
}
} else {
if (!encoder) {
/*
* If no encoder has been found the entity must be the
* connector.
......@@ -371,7 +338,7 @@ static int rcar_du_encoders_init_one(struct rcar_du_device *rcdu,
connector = entity;
}
ret = rcar_du_encoder_init(rcdu, enc_type, output, encoder, connector);
ret = rcar_du_encoder_init(rcdu, output, encoder, connector);
if (ret && ret != -EPROBE_DEFER)
dev_warn(rcdu->dev,
"failed to initialize encoder %s on output %u (%d), skipping\n",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment