drm/amd/display: On clock init, maintain DISPCLK freq

[Why]
On init if a display is connected, we need to maintain the DISPCLK
frequency Even though DPG_EN=1, the display still requires the correct
timing or it could cause audio corruption (if DISPCLK freq is reduced).

[How]
Read the current DISPCLK freq and request the same value to ensure the
timing is valid and unchanged.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/clk_mgr/dcn401/dcn401_clk_mgr.c

@@ -1459,6 +1459,22 @@ static int dcn401_get_dtb_ref_freq_khz(struct clk_mgr *clk_mgr_base)
 	return dtb_ref_clk_khz;
 }
 
+static int dcn401_get_dispclk_from_dentist(struct clk_mgr *clk_mgr_base)
+{
+	struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
+	uint32_t dispclk_wdivider;
+	int disp_divider;
+
+	REG_GET(DENTIST_DISPCLK_CNTL, DENTIST_DISPCLK_WDIVIDER, &dispclk_wdivider);
+	disp_divider = dentist_get_divider_from_did(dispclk_wdivider);
+
+	/* Return DISPCLK freq in Khz */
+	if (disp_divider)
+		return (DENTIST_DIVIDER_RANGE_SCALE_FACTOR * clk_mgr->base.dentist_vco_freq_khz) / disp_divider;
+
+	return 0;
+}
+
 static struct clk_mgr_funcs dcn401_funcs = {
 		.get_dp_ref_clk_frequency = dce12_get_dp_ref_freq_khz,
 		.get_dtb_ref_clk_frequency = dcn401_get_dtb_ref_freq_khz,
@@ -1472,6 +1488,7 @@ static struct clk_mgr_funcs dcn401_funcs = {
 		.are_clock_states_equal = dcn401_are_clock_states_equal,
 		.enable_pme_wa = dcn401_enable_pme_wa,
 		.is_smu_present = dcn401_is_smu_present,
+		.get_dispclk_from_dentist = dcn401_get_dispclk_from_dentist,
 };
 
 struct clk_mgr_internal *dcn401_clk_mgr_construct(

drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c

@@ -57,7 +57,16 @@ static void dcn401_initialize_min_clocks(struct dc *dc)
 	clocks->socclk_khz = dc->clk_mgr->bw_params->clk_table.entries[0].socclk_mhz * 1000;
 	clocks->dramclk_khz = dc->clk_mgr->bw_params->clk_table.entries[0].memclk_mhz * 1000;
 	clocks->dppclk_khz = dc->clk_mgr->bw_params->clk_table.entries[0].dppclk_mhz * 1000;
-	clocks->dispclk_khz = dc->clk_mgr->bw_params->clk_table.entries[0].dispclk_mhz * 1000;
+	if (dc->debug.disable_boot_optimizations) {
+		clocks->dispclk_khz = dc->clk_mgr->bw_params->clk_table.entries[0].dispclk_mhz * 1000;
+	} else {
+		/* Even though DPG_EN = 1 for the connected display, it still requires the
+		 * correct timing so we cannot set DISPCLK to min freq or it could cause
+		 * audio corruption. Read current DISPCLK from DENTIST and request the same
+		 * freq to ensure that the timing is valid and unchanged.
+		 */
+		clocks->dispclk_khz = dc->clk_mgr->funcs->get_dispclk_from_dentist(dc->clk_mgr);
+	}
 	clocks->ref_dtbclk_khz = dc->clk_mgr->bw_params->clk_table.entries[0].dtbclk_mhz * 1000;
 	clocks->fclk_p_state_change_support = true;
 	clocks->p_state_change_support = true;