net: phy: marvell10g: Use tabs instead of spaces for indentation

Some register definitions were defined with spaces used for indentation.
Change them to tabs.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/marvell10g.c

@@ -117,16 +117,16 @@ enum {
 	MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_NO_SGMII_AN	= 0x5,
 	MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH	= 0x6,
 	MV_V2_33X0_PORT_CTRL_MACTYPE_USXGMII			= 0x7,
-	MV_V2_PORT_INTR_STS     = 0xf040,
-	MV_V2_PORT_INTR_MASK    = 0xf043,
-	MV_V2_PORT_INTR_STS_WOL_EN      = BIT(8),
-	MV_V2_MAGIC_PKT_WORD0   = 0xf06b,
-	MV_V2_MAGIC_PKT_WORD1   = 0xf06c,
-	MV_V2_MAGIC_PKT_WORD2   = 0xf06d,
+	MV_V2_PORT_INTR_STS		= 0xf040,
+	MV_V2_PORT_INTR_MASK		= 0xf043,
+	MV_V2_PORT_INTR_STS_WOL_EN	= BIT(8),
+	MV_V2_MAGIC_PKT_WORD0		= 0xf06b,
+	MV_V2_MAGIC_PKT_WORD1		= 0xf06c,
+	MV_V2_MAGIC_PKT_WORD2		= 0xf06d,
 	/* Wake on LAN registers */
-	MV_V2_WOL_CTRL          = 0xf06e,
-	MV_V2_WOL_CTRL_CLEAR_STS        = BIT(15),
-	MV_V2_WOL_CTRL_MAGIC_PKT_EN     = BIT(0),
+	MV_V2_WOL_CTRL			= 0xf06e,
+	MV_V2_WOL_CTRL_CLEAR_STS	= BIT(15),
+	MV_V2_WOL_CTRL_MAGIC_PKT_EN	= BIT(0),
 	/* Temperature control/read registers (88X3310 only) */
 	MV_V2_TEMP_CTRL		= 0xf08a,
 	MV_V2_TEMP_CTRL_MASK	= 0xc000,