arm64: dts: qcom: msm8996-gemini: correct UFS pad supply

The Qualcomm UFS phy switched from dedicated driver to QMP phy driver.
Eventually the old driver was removed in commit 02dca8c9 ("phy:
qcom: remove ufs qmp phy driver").  The original driver and its binding
used vddp-ref-clk regulator supply, but the new one did not and left the
supply unused.

The Qualcomm UFS phy bindings were also migrated to newer ones and
dropped support for vddp-ref-clk regulator in commit dc5cb635
("dt-bindings: phy: migrate QMP UFS PHY bindings to
qcom,sc8280xp-qmp-ufs-phy.yaml").

It turns out that this regulator, although with inaccurate name
vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or
similar, depending on the SoC) used by UFS controller.

Bring back handling of this supply by using more appropriate regulator -
UFS controller host supply.  This also fixes dtbs_check warning:

  msm8996-xiaomi-gemini.dtb: phy@627000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905161920.252013-8-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi

@@ -419,6 +419,7 @@ &ufshc {
 	vcc-supply = <&vreg_l20a_2p95>;
 	vccq-supply = <&vreg_l25a_1p2>;
 	vccq2-supply = <&vreg_s4a_1p8>;
+	vdd-hba-supply = <&vreg_l25a_1p2>;
 
 	vcc-max-microamp = <600000>;
 	vccq-max-microamp = <450000>;
@@ -430,7 +431,6 @@ &ufsphy {
 
 	vdda-phy-supply = <&vreg_l28a_0p925>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
-	vddp-ref-clk-supply = <&vreg_l25a_1p2>;
 };
 
 &venus {