Commit 390a5fa5 authored by Sakari Ailus's avatar Sakari Ailus Committed by Mauro Carvalho Chehab

[media] smiapp: Obtain device information from the Device Tree if OF node exists

Platform data support is retained.

of_property_read_u64_array() isn't used yet as it's not in yet.
Signed-off-by: default avatarSakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@osg.samsung.com>
parent a2cec3c0
......@@ -25,11 +25,13 @@
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/of_gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/smiapp.h>
#include <linux/v4l2-mediabus.h>
#include <media/v4l2-device.h>
#include <media/v4l2-of.h>
#include "smiapp.h"
......@@ -2919,19 +2921,121 @@ static int smiapp_resume(struct device *dev)
#endif /* CONFIG_PM */
static struct smiapp_platform_data *smiapp_get_pdata(struct device *dev)
{
struct smiapp_platform_data *pdata;
struct v4l2_of_endpoint bus_cfg;
struct device_node *ep;
struct property *prop;
__be32 *val;
uint32_t asize;
unsigned int i;
int rval;
if (!dev->of_node)
return dev->platform_data;
ep = of_graph_get_next_endpoint(dev->of_node, NULL);
if (!ep)
return NULL;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
rval = -ENOMEM;
goto out_err;
}
v4l2_of_parse_endpoint(ep, &bus_cfg);
switch (bus_cfg.bus_type) {
case V4L2_MBUS_CSI2:
pdata->csi_signalling_mode = SMIAPP_CSI_SIGNALLING_MODE_CSI2;
break;
/* FIXME: add CCP2 support. */
default:
rval = -EINVAL;
goto out_err;
}
pdata->lanes = bus_cfg.bus.mipi_csi2.num_data_lanes;
dev_dbg(dev, "lanes %u\n", pdata->lanes);
/* xshutdown GPIO is optional */
pdata->xshutdown = of_get_named_gpio(dev->of_node, "reset-gpios", 0);
/* NVM size is not mandatory */
of_property_read_u32(dev->of_node, "nokia,nvm-size",
&pdata->nvm_size);
rval = of_property_read_u32(dev->of_node, "clock-frequency",
&pdata->ext_clk);
if (rval) {
dev_warn(dev, "can't get clock-frequency\n");
goto out_err;
}
dev_dbg(dev, "reset %d, nvm %d, clk %d, csi %d\n", pdata->xshutdown,
pdata->nvm_size, pdata->ext_clk, pdata->csi_signalling_mode);
rval = of_get_property(
dev->of_node, "link-frequencies", &asize) ? 0 : -ENOENT;
if (rval) {
dev_warn(dev, "can't get link-frequencies array size\n");
goto out_err;
}
pdata->op_sys_clock = devm_kzalloc(dev, asize, GFP_KERNEL);
if (!pdata->op_sys_clock) {
rval = -ENOMEM;
goto out_err;
}
asize /= sizeof(*pdata->op_sys_clock);
/*
* Read a 64-bit array --- this will be replaced with a
* of_property_read_u64_array() once it's merged.
*/
prop = of_find_property(dev->of_node, "link-frequencies", NULL);
if (!prop)
goto out_err;
if (!prop->value)
goto out_err;
if (asize * sizeof(*pdata->op_sys_clock) > prop->length)
goto out_err;
val = prop->value;
if (IS_ERR(val))
goto out_err;
for (i = 0; i < asize; i++)
pdata->op_sys_clock[i] = of_read_number(val + i * 2, 2);
for (; asize > 0; asize--)
dev_dbg(dev, "freq %d: %lld\n", asize - 1,
pdata->op_sys_clock[asize - 1]);
of_node_put(ep);
return pdata;
out_err:
of_node_put(ep);
return NULL;
}
static int smiapp_probe(struct i2c_client *client,
const struct i2c_device_id *devid)
{
struct smiapp_sensor *sensor;
struct smiapp_platform_data *pdata = smiapp_get_pdata(&client->dev);
int rval;
if (client->dev.platform_data == NULL)
if (pdata == NULL)
return -ENODEV;
sensor = devm_kzalloc(&client->dev, sizeof(*sensor), GFP_KERNEL);
if (sensor == NULL)
return -ENOMEM;
sensor->platform_data = client->dev.platform_data;
sensor->platform_data = pdata;
mutex_init(&sensor->mutex);
mutex_init(&sensor->power_mutex);
sensor->src = &sensor->ssds[sensor->ssds_used];
......@@ -2990,6 +3094,11 @@ static int smiapp_remove(struct i2c_client *client)
return 0;
}
static const struct of_device_id smiapp_of_table[] = {
{ .compatible = "nokia,smia" },
{ },
};
static const struct i2c_device_id smiapp_id_table[] = {
{ SMIAPP_NAME, 0 },
{ },
......@@ -3003,6 +3112,7 @@ static const struct dev_pm_ops smiapp_pm_ops = {
static struct i2c_driver smiapp_i2c_driver = {
.driver = {
.of_match_table = smiapp_of_table,
.name = SMIAPP_NAME,
.pm = &smiapp_pm_ops,
},
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment