Commit 39412eff authored by Linus Torvalds's avatar Linus Torvalds

Merge http://gkernel.bkbits.net/irda-2.5

into home.transmeta.com:/home/torvalds/v2.5/linux
parents 079f066a 260f84a6
......@@ -157,3 +157,11 @@ CONFIG_OLD_BELKIN_DONGLE
called old_belkin.o. Some information is contained in the comments
at the top of <file:drivers/net/irda/old_belkin.c>.
ACTiSYS IR-200L dongle (Experimental)
CONFIG_ACT200L_DONGLE
Say Y here if you want to build support for the ACTiSYS IR-200L
dongle. If you want to compile it as a module, say M here and read
Documentation/modules.txt. The ACTiSYS IR-200L dongle attaches to
the normal 9-pin serial port connector, and can currently only be
used by IrTTY. To activate support for ACTiSYS IR-200L dongles
you will have to start irattach like this: "irattach -d act200l".
......@@ -18,6 +18,10 @@ if [ "$CONFIG_DONGLE" != "n" ]; then
if [ "$CONFIG_ARCH_EP7211" = "y" ]; then
dep_tristate ' EP7211 I/R support' CONFIG_EP7211_IR $CONFIG_IRDA
fi
if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
dep_tristate ' ACTiSYS IR-200L dongle (Experimental)' CONFIG_ACT200L_DONGLE $CONFIG_IRDA
dep_tristate ' Mobile Action MA600 dongle (Experimental)' CONFIG_MA600_DONGLE $CONFIG_IRDA
fi
fi
comment 'FIR device drivers'
......
......@@ -25,5 +25,7 @@ obj-$(CONFIG_LITELINK_DONGLE) += litelink.o
obj-$(CONFIG_OLD_BELKIN_DONGLE) += old_belkin.o
obj-$(CONFIG_EP7211_IR) += ep7211_ir.o
obj-$(CONFIG_MCP2120_DONGLE) += mcp2120.o
obj-$(CONFIG_ACT200L_DONGLE) += act200l.o
obj-$(CONFIG_MA600_DONGLE) += ma600.o
include $(TOPDIR)/Rules.make
/*********************************************************************
*
* Filename: act200l.c
* Version: 0.8
* Description: Implementation for the ACTiSYS ACT-IR200L dongle
* Status: Experimental.
* Author: SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
* Created at: Fri Aug 3 17:35:42 2001
* Modified at: Fri Aug 17 10:22:40 2001
* Modified by: SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
*
* Copyright (c) 2001 SHIMIZU Takuya, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
********************************************************************/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/tty.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <net/irda/irda.h>
#include <net/irda/irda_device.h>
#include <net/irda/irtty.h>
static int act200l_reset(struct irda_task *task);
static void act200l_open(dongle_t *self, struct qos_info *qos);
static void act200l_close(dongle_t *self);
static int act200l_change_speed(struct irda_task *task);
/* Regsiter 0: Control register #1 */
#define ACT200L_REG0 0x00
#define ACT200L_TXEN 0x01 /* Enable transmitter */
#define ACT200L_RXEN 0x02 /* Enable receiver */
/* Register 1: Control register #2 */
#define ACT200L_REG1 0x10
#define ACT200L_LODB 0x01 /* Load new baud rate count value */
#define ACT200L_WIDE 0x04 /* Expand the maximum allowable pulse */
/* Register 4: Output Power register */
#define ACT200L_REG4 0x40
#define ACT200L_OP0 0x01 /* Enable LED1C output */
#define ACT200L_OP1 0x02 /* Enable LED2C output */
#define ACT200L_BLKR 0x04
/* Register 5: Receive Mode register */
#define ACT200L_REG5 0x50
#define ACT200L_RWIDL 0x01 /* fixed 1.6us pulse mode */
/* Register 6: Receive Sensitivity register #1 */
#define ACT200L_REG6 0x60
#define ACT200L_RS0 0x01 /* receive threshold bit 0 */
#define ACT200L_RS1 0x02 /* receive threshold bit 1 */
/* Register 7: Receive Sensitivity register #2 */
#define ACT200L_REG7 0x70
#define ACT200L_ENPOS 0x04 /* Ignore the falling edge */
/* Register 8,9: Baud Rate Dvider register #1,#2 */
#define ACT200L_REG8 0x80
#define ACT200L_REG9 0x90
#define ACT200L_2400 0x5f
#define ACT200L_9600 0x17
#define ACT200L_19200 0x0b
#define ACT200L_38400 0x05
#define ACT200L_57600 0x03
#define ACT200L_115200 0x01
/* Register 13: Control register #3 */
#define ACT200L_REG13 0xd0
#define ACT200L_SHDW 0x01 /* Enable access to shadow registers */
/* Register 15: Status register */
#define ACT200L_REG15 0xf0
/* Register 21: Control register #4 */
#define ACT200L_REG21 0x50
#define ACT200L_EXCK 0x02 /* Disable clock output driver */
#define ACT200L_OSCL 0x04 /* oscillator in low power, medium accuracy mode */
static struct dongle_reg dongle = {
Q_NULL,
IRDA_ACT200L_DONGLE,
act200l_open,
act200l_close,
act200l_reset,
act200l_change_speed,
};
int __init act200l_init(void)
{
return irda_device_register_dongle(&dongle);
}
void __exit act200l_cleanup(void)
{
irda_device_unregister_dongle(&dongle);
}
static void act200l_open(dongle_t *self, struct qos_info *qos)
{
IRDA_DEBUG(2, __FUNCTION__ "()\n");
/* Power on the dongle */
self->set_dtr_rts(self->dev, TRUE, TRUE);
/* Set the speeds we can accept */
qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
qos->min_turn_time.bits = 0x03;
MOD_INC_USE_COUNT;
}
static void act200l_close(dongle_t *self)
{
IRDA_DEBUG(2, __FUNCTION__ "()\n");
/* Power off the dongle */
self->set_dtr_rts(self->dev, FALSE, FALSE);
MOD_DEC_USE_COUNT;
}
/*
* Function act200l_change_speed (dev, speed)
*
* Set the speed for the ACTiSYS ACT-IR200L type dongle.
*
*/
static int act200l_change_speed(struct irda_task *task)
{
dongle_t *self = (dongle_t *) task->instance;
__u32 speed = (__u32) task->param;
__u8 control[3];
int ret = 0;
IRDA_DEBUG(2, __FUNCTION__ "()\n");
self->speed_task = task;
switch (task->state) {
case IRDA_TASK_INIT:
if (irda_task_execute(self, act200l_reset, NULL, task,
(void *) speed))
{
/* Dongle need more time to reset */
irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
/* Give reset 1 sec to finish */
ret = MSECS_TO_JIFFIES(1000);
}
break;
case IRDA_TASK_CHILD_WAIT:
WARNING(__FUNCTION__ "(), resetting dongle timed out!\n");
ret = -1;
break;
case IRDA_TASK_CHILD_DONE:
/* Clear DTR and set RTS to enter command mode */
self->set_dtr_rts(self->dev, FALSE, TRUE);
switch (speed) {
case 9600:
default:
control[0] = ACT200L_REG8 | (ACT200L_9600 & 0x0f);
control[1] = ACT200L_REG9 | ((ACT200L_9600 >> 4) & 0x0f);
break;
case 19200:
control[0] = ACT200L_REG8 | (ACT200L_19200 & 0x0f);
control[1] = ACT200L_REG9 | ((ACT200L_19200 >> 4) & 0x0f);
break;
case 38400:
control[0] = ACT200L_REG8 | (ACT200L_38400 & 0x0f);
control[1] = ACT200L_REG9 | ((ACT200L_38400 >> 4) & 0x0f);
break;
case 57600:
control[0] = ACT200L_REG8 | (ACT200L_57600 & 0x0f);
control[1] = ACT200L_REG9 | ((ACT200L_57600 >> 4) & 0x0f);
break;
case 115200:
control[0] = ACT200L_REG8 | (ACT200L_115200 & 0x0f);
control[1] = ACT200L_REG9 | ((ACT200L_115200 >> 4) & 0x0f);
break;
}
control[2] = ACT200L_REG1 | ACT200L_LODB | ACT200L_WIDE;
/* Write control bytes */
self->write(self->dev, control, 3);
irda_task_next_state(task, IRDA_TASK_WAIT);
ret = MSECS_TO_JIFFIES(5);
break;
case IRDA_TASK_WAIT:
/* Go back to normal mode */
self->set_dtr_rts(self->dev, TRUE, TRUE);
irda_task_next_state(task, IRDA_TASK_DONE);
self->speed_task = NULL;
break;
default:
ERROR(__FUNCTION__ "(), unknown state %d\n", task->state);
irda_task_next_state(task, IRDA_TASK_DONE);
self->speed_task = NULL;
ret = -1;
break;
}
return ret;
}
/*
* Function act200l_reset (driver)
*
* Reset the ACTiSYS ACT-IR200L type dongle.
*/
static int act200l_reset(struct irda_task *task)
{
dongle_t *self = (dongle_t *) task->instance;
__u8 control[9] = {
ACT200L_REG15,
ACT200L_REG13 | ACT200L_SHDW,
ACT200L_REG21 | ACT200L_EXCK | ACT200L_OSCL,
ACT200L_REG13,
ACT200L_REG7 | ACT200L_ENPOS,
ACT200L_REG6 | ACT200L_RS0 | ACT200L_RS1,
ACT200L_REG5 | ACT200L_RWIDL,
ACT200L_REG4 | ACT200L_OP0 | ACT200L_OP1 | ACT200L_BLKR,
ACT200L_REG0 | ACT200L_TXEN | ACT200L_RXEN
};
int ret = 0;
IRDA_DEBUG(2, __FUNCTION__ "()\n");
self->reset_task = task;
switch (task->state) {
case IRDA_TASK_INIT:
/* Power on the dongle */
self->set_dtr_rts(self->dev, TRUE, TRUE);
irda_task_next_state(task, IRDA_TASK_WAIT1);
ret = MSECS_TO_JIFFIES(50);
break;
case IRDA_TASK_WAIT1:
/* Reset the dongle : set RTS low for 25 ms */
self->set_dtr_rts(self->dev, TRUE, FALSE);
irda_task_next_state(task, IRDA_TASK_WAIT2);
ret = MSECS_TO_JIFFIES(50);
break;
case IRDA_TASK_WAIT2:
/* Clear DTR and set RTS to enter command mode */
self->set_dtr_rts(self->dev, FALSE, TRUE);
/* Write control bytes */
self->write(self->dev, control, 9);
irda_task_next_state(task, IRDA_TASK_WAIT3);
ret = MSECS_TO_JIFFIES(15);
break;
case IRDA_TASK_WAIT3:
/* Go back to normal mode */
self->set_dtr_rts(self->dev, TRUE, TRUE);
irda_task_next_state(task, IRDA_TASK_DONE);
self->reset_task = NULL;
break;
default:
ERROR(__FUNCTION__ "(), unknown state %d\n", task->state);
irda_task_next_state(task, IRDA_TASK_DONE);
self->reset_task = NULL;
ret = -1;
break;
}
return ret;
}
MODULE_AUTHOR("SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>");
MODULE_DESCRIPTION("ACTiSYS ACT-IR200L dongle driver");
MODULE_LICENSE("GPL");
/*
* Function init_module (void)
*
* Initialize ACTiSYS ACT-IR200L module
*
*/
module_init(act200l_init);
/*
* Function cleanup_module (void)
*
* Cleanup ACTiSYS ACT-IR200L module
*
*/
module_exit(act200l_cleanup);
......@@ -30,23 +30,24 @@
* IMPORTANT NOTE
* --------------
*
* As of kernel 2.4.10, this is the state of compliance and testing of
* As of kernel 2.5.20, this is the state of compliance and testing of
* this driver (irda-usb) with regards to the USB low level drivers...
*
* This driver has been tested SUCCESSFULLY with the following drivers :
* o usb-uhci (For Intel/Via USB controllers)
* o usb-ohci (For other USB controllers)
* o usb-uhci-hcd (For Intel/Via USB controllers)
* o uhci-hcd (Alternate/JE driver for Intel/Via USB controllers)
*
* This driver has NOT been tested with the following drivers :
* o usb-ehci (USB 2.0 controllers)
* o ehci-hcd (USB 2.0 controllers)
*
* This driver WON'T WORK with the following drivers :
* o uhci (Alternate/JE driver for Intel/Via USB controllers)
* Amongst the reasons :
* o uhci doesn't implement USB_ZERO_PACKET
* o uhci non-compliant use of urb->timeout
* The final fix for USB_ZERO_PACKET in uhci is likely to be in 2.4.19 and
* 2.5.8. With this fix, the driver will work properly. More on that later.
* This driver DOESN'T SEEM TO WORK with the following drivers :
* o ohci-hcd (For other USB controllers)
* The first outgoing URB never calls its completion/failure callback.
*
* Note that all HCD drivers do USB_ZERO_PACKET and timeout properly,
* so we don't have to worry about that anymore.
* One common problem is the failure to set the address on the dongle,
* but this happens before the driver gets loaded...
*
* Jean II
*/
......@@ -167,7 +168,8 @@ static void irda_usb_build_header(struct irda_usb_cb *self,
IRDA_DEBUG(2, __FUNCTION__ "(), changing speed to %d\n", self->new_speed);
self->speed = self->new_speed;
self->new_speed = -1;
/* We will do ` self->new_speed = -1; ' in the completion
* handler just in case the current URB fail - Jean II */
switch (self->speed) {
case 2400:
......@@ -208,7 +210,8 @@ static void irda_usb_build_header(struct irda_usb_cb *self,
if (self->new_xbofs != -1) {
IRDA_DEBUG(2, __FUNCTION__ "(), changing xbofs to %d\n", self->new_xbofs);
self->xbofs = self->new_xbofs;
self->new_xbofs = -1;
/* We will do ` self->new_xbofs = -1; ' in the completion
* handler just in case the current URB fail - Jean II */
switch (self->xbofs) {
case 48:
......@@ -286,7 +289,8 @@ static void irda_usb_change_speed_xbofs(struct irda_usb_cb *self)
/*------------------------------------------------------------------*/
/*
* Note : this function will be called with both speed_urb and empty_urb...
* Speed URB callback
* Now, we can only get called for the speed URB.
*/
static void speed_bulk_callback(struct urb *urb)
{
......@@ -295,10 +299,9 @@ static void speed_bulk_callback(struct urb *urb)
IRDA_DEBUG(2, __FUNCTION__ "()\n");
/* We should always have a context */
if (self == NULL) {
WARNING(__FUNCTION__ "(), Bug : self == NULL\n");
return;
}
ASSERT(self != NULL, return;);
/* We should always be called for the speed URB */
ASSERT(urb == self->speed_urb, return;);
/* Check for timeout and other USB nasties */
if (urb->status != 0) {
......@@ -314,12 +317,14 @@ static void speed_bulk_callback(struct urb *urb)
}
/* urb is now available */
urb->status = 0;
//urb->status = 0; -> tested above
/* New speed and xbof is now commited in hardware */
self->new_speed = -1;
self->new_xbofs = -1;
/* If it was the speed URB, allow the stack to send more packets */
if(urb == self->speed_urb) {
/* Allow the stack to send more packets */
netif_wake_queue(self->netdev);
}
}
/*------------------------------------------------------------------*/
......@@ -334,6 +339,9 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
s32 speed;
s16 xbofs;
int res, mtt;
int err = 1; /* Failed */
IRDA_DEBUG(4, __FUNCTION__ "() on %s\n", netdev->name);
netif_stop_queue(netdev);
......@@ -343,10 +351,9 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
/* Check if the device is still there.
* We need to check self->present under the spinlock because
* of irda_usb_disconnect() is synchronous - Jean II */
if ((!self) || (!self->present)) {
if (!self->present) {
IRDA_DEBUG(0, __FUNCTION__ "(), Device is gone...\n");
spin_unlock_irqrestore(&self->lock, flags);
return 1; /* Failed */
goto drop;
}
/* Check if we need to change the number of xbofs */
......@@ -373,6 +380,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
irda_usb_change_speed_xbofs(self);
netdev->trans_start = jiffies;
/* Will netif_wake_queue() in callback */
err = 0; /* No error */
goto drop;
}
}
......@@ -479,7 +487,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
/* Drop silently the skb and exit */
dev_kfree_skb(skb);
spin_unlock_irqrestore(&self->lock, flags);
return 0;
return err; /* Usually 1 */
}
/*------------------------------------------------------------------*/
......@@ -495,10 +503,9 @@ static void write_bulk_callback(struct urb *urb)
IRDA_DEBUG(2, __FUNCTION__ "()\n");
/* We should always have a context */
if (self == NULL) {
WARNING(__FUNCTION__ "(), Bug : self == NULL\n");
return;
}
ASSERT(self != NULL, return;);
/* We should always be called for the speed URB */
ASSERT(urb == self->tx_urb, return;);
/* Free up the skb */
dev_kfree_skb_any(skb);
......@@ -531,10 +538,21 @@ static void write_bulk_callback(struct urb *urb)
return;
}
/* If we need to change the speed or xbofs, do it now */
/* If changes to speed or xbofs is pending... */
if ((self->new_speed != -1) || (self->new_xbofs != -1)) {
if ((self->new_speed != self->speed) ||
(self->new_xbofs != self->xbofs)) {
/* We haven't changed speed yet (because of
* IUC_SPEED_BUG), so do it now - Jean II */
IRDA_DEBUG(1, __FUNCTION__ "(), Changing speed now...\n");
irda_usb_change_speed_xbofs(self);
} else {
/* New speed and xbof is now commited in hardware */
self->new_speed = -1;
self->new_xbofs = -1;
/* Done, waiting for next packet */
netif_wake_queue(self->netdev);
}
} else {
/* Otherwise, allow the stack to send more packets */
netif_wake_queue(self->netdev);
......@@ -559,11 +577,13 @@ static void irda_usb_net_timeout(struct net_device *netdev)
int done = 0; /* If we have made any progress */
IRDA_DEBUG(0, __FUNCTION__ "(), Network layer thinks we timed out!\n");
ASSERT(self != NULL, return;);
/* Protect us from USB callbacks, net Tx and else. */
spin_lock_irqsave(&self->lock, flags);
if ((!self) || (!self->present)) {
/* self->present *MUST* be read under spinlock */
if (!self->present) {
WARNING(__FUNCTION__ "(), device not present!\n");
netif_stop_queue(netdev);
spin_unlock_irqrestore(&self->lock, flags);
......@@ -678,35 +698,7 @@ static void irda_usb_net_timeout(struct net_device *netdev)
/*------------------------------------------------------------------*/
/*
* Submit a Rx URB to the USB layer to handle reception of a frame
*
* Important note :
* The function process_urb() in usb-uhci.c contains the following code :
* > urb->complete ((struct urb *) urb);
* > // Re-submit the URB if ring-linked
* > if (is_ring && (urb->status != -ENOENT) && !contains_killed) {
* > urb->dev=usb_dev;
* > uhci_submit_urb (urb);
* > }
* The way I see it is that if we submit more than one Rx URB at a
* time, the Rx URB can be automatically re-submitted after the
* completion handler is called.
*
* My take is that it's a questionable feature, and quite difficult
* to control and to make work effectively.
* The outcome (re-submited or not) depend on various complex
* test ('is_ring' and 'contains_killed'), and the completion handler
* don't have this information, so basically the driver has no way
* to know if URB are resubmitted or not. Yuck !
* If everything is perfect, it's cool, but the problem is when
* an URB is killed (timeout, call to unlink_urb(), ...), things get
* messy...
* The other problem is that this scheme deal only with the URB
* and ignore everything about the associated buffer. So, it would
* resubmit URB even if the buffer is still in use or non-existent.
* On the other hand, submitting ourself in the completion callback
* is quite trivial and work well (this function).
* Moreover, this scheme doesn't allow to have an idle URB, which is
* necessary to overcome some URB failures.
* Mostly called by the completion callback of the previous URB.
*
* Jean II
*/
......
/*********************************************************************
*
* Filename: ma600.c
* Version: 0.1
* Description: Implementation of the MA600 dongle
* Status: Experimental.
* Author: Leung <95Etwl@alumni.ee.ust.hk> http://www.engsvr.ust/~eetwl95
* Created at: Sat Jun 10 20:02:35 2000
* Modified at:
* Modified by:
*
* Note: very thanks to Mr. Maru Wang <maru@mobileaction.com.tw> for providing
* information on the MA600 dongle
*
* Copyright (c) 2000 Leung, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
********************************************************************/
/* define this macro for release version */
//#define NDEBUG
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/tty.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <net/irda/irda.h>
#include <net/irda/irda_device.h>
#include <net/irda/irtty.h>
#ifndef NDEBUG
#undef IRDA_DEBUG
#define IRDA_DEBUG(n, args...) (printk(KERN_DEBUG args))
#undef ASSERT(expr, func)
#define ASSERT(expr, func) \
if(!(expr)) { \
printk( "Assertion failed! %s,%s,%s,line=%d\n",\
#expr,__FILE__,__FUNCTION__,__LINE__); \
##func}
#endif
/* convert hex value to ascii hex */
static const char hexTbl[] = "0123456789ABCDEF";
static void ma600_open(dongle_t *self, struct qos_info *qos);
static void ma600_close(dongle_t *self);
static int ma600_change_speed(struct irda_task *task);
static int ma600_reset(struct irda_task *task);
/* control byte for MA600 */
#define MA600_9600 0x00
#define MA600_19200 0x01
#define MA600_38400 0x02
#define MA600_57600 0x03
#define MA600_115200 0x04
#define MA600_DEV_ID1 0x05
#define MA600_DEV_ID2 0x06
#define MA600_2400 0x08
static struct dongle_reg dongle = {
Q_NULL,
IRDA_MA600_DONGLE,
ma600_open,
ma600_close,
ma600_reset,
ma600_change_speed,
};
int __init ma600_init(void)
{
IRDA_DEBUG(2, __FUNCTION__ "()\n");
return irda_device_register_dongle(&dongle);
}
void __exit ma600_cleanup(void)
{
IRDA_DEBUG(2, __FUNCTION__ "()\n");
irda_device_unregister_dongle(&dongle);
}
/*
Power on:
(0) Clear RTS and DTR for 1 second
(1) Set RTS and DTR for 1 second
(2) 9600 bps now
Note: assume RTS, DTR are clear before
*/
static void ma600_open(dongle_t *self, struct qos_info *qos)
{
IRDA_DEBUG(2, __FUNCTION__ "()\n");
qos->baud_rate.bits &= IR_2400|IR_9600|IR_19200|IR_38400
|IR_57600|IR_115200;
qos->min_turn_time.bits = 0x01; /* Needs at least 1 ms */
irda_qos_bits_to_value(qos);
//self->set_dtr_rts(self->dev, FALSE, FALSE);
// should wait 1 second
self->set_dtr_rts(self->dev, TRUE, TRUE);
// should wait 1 second
MOD_INC_USE_COUNT;
}
static void ma600_close(dongle_t *self)
{
IRDA_DEBUG(2, __FUNCTION__ "()\n");
/* Power off dongle */
self->set_dtr_rts(self->dev, FALSE, FALSE);
MOD_DEC_USE_COUNT;
}
static __u8 get_control_byte(__u32 speed)
{
__u8 byte;
switch (speed) {
default:
case 115200:
byte = MA600_115200;
break;
case 57600:
byte = MA600_57600;
break;
case 38400:
byte = MA600_38400;
break;
case 19200:
byte = MA600_19200;
break;
case 9600:
byte = MA600_9600;
break;
case 2400:
byte = MA600_2400;
break;
}
return byte;
}
/*
* Function ma600_change_speed (dev, state, speed)
*
* Set the speed for the MA600 type dongle. Warning, this
* function must be called with a process context!
*
* Algorithm
* 1. Reset
* 2. clear RTS, set DTR and wait for 1ms
* 3. send Control Byte to the MA600 through TXD to set new baud rate
* wait until the stop bit of Control Byte is sent (for 9600 baud rate,
* it takes about 10 msec)
* 4. set RTS, set DTR (return to NORMAL Operation)
* 5. wait at least 10 ms, new setting (baud rate, etc) takes effect here
* after
*/
static int ma600_change_speed(struct irda_task *task)
{
dongle_t *self = (dongle_t *) task->instance;
__u32 speed = (__u32) task->param;
static __u8 byte;
__u8 byte_echo;
int ret = 0;
IRDA_DEBUG(2, __FUNCTION__ "()\n");
ASSERT(task != NULL, return -1;);
if (self->speed_task && self->speed_task != task) {
IRDA_DEBUG(0, __FUNCTION__ "(), busy!\n");
return MSECS_TO_JIFFIES(10);
} else {
self->speed_task = task;
}
switch (task->state) {
case IRDA_TASK_INIT:
case IRDA_TASK_CHILD_INIT:
/*
* Need to reset the dongle and go to 9600 bps before
* programming
*/
if (irda_task_execute(self, ma600_reset, NULL, task,
(void *) speed)) {
/* Dongle need more time to reset */
irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
/* give 1 second to finish */
ret = MSECS_TO_JIFFIES(1000);
} else {
irda_task_next_state(task, IRDA_TASK_CHILD_DONE);
}
break;
case IRDA_TASK_CHILD_WAIT:
WARNING(__FUNCTION__ "(), resetting dongle timed out!\n");
ret = -1;
break;
case IRDA_TASK_CHILD_DONE:
/* Set DTR, Clear RTS */
self->set_dtr_rts(self->dev, TRUE, FALSE);
ret = MSECS_TO_JIFFIES(1); /* Sleep 1 ms */
irda_task_next_state(task, IRDA_TASK_WAIT);
break;
case IRDA_TASK_WAIT:
speed = (__u32) task->param;
byte = get_control_byte(speed);
/* Write control byte */
self->write(self->dev, &byte, sizeof(byte));
irda_task_next_state(task, IRDA_TASK_WAIT1);
/* Wait at least 10 ms */
ret = MSECS_TO_JIFFIES(15);
break;
case IRDA_TASK_WAIT1:
/* Read control byte echo */
self->read(self->dev, &byte_echo, sizeof(byte_echo));
if(byte != byte_echo) {
/* if control byte != echo, I don't know what to do */
printk(KERN_WARNING __FUNCTION__ "() control byte written != read!\n");
printk(KERN_WARNING "control byte = 0x%c%c\n",
hexTbl[(byte>>4)&0x0f], hexTbl[byte&0x0f]);
printk(KERN_WARNING "byte echo = 0x%c%c\n",
hexTbl[(byte_echo>>4) & 0x0f],
hexTbl[byte_echo & 0x0f]);
#ifndef NDEBUG
} else {
IRDA_DEBUG(2, __FUNCTION__ "() control byte write read OK\n");
#endif
}
/* Set DTR, Set RTS */
self->set_dtr_rts(self->dev, TRUE, TRUE);
irda_task_next_state(task, IRDA_TASK_WAIT2);
/* Wait at least 10 ms */
ret = MSECS_TO_JIFFIES(10);
break;
case IRDA_TASK_WAIT2:
irda_task_next_state(task, IRDA_TASK_DONE);
self->speed_task = NULL;
break;
default:
ERROR(__FUNCTION__ "(), unknown state %d\n", task->state);
irda_task_next_state(task, IRDA_TASK_DONE);
self->speed_task = NULL;
ret = -1;
break;
}
return ret;
}
/*
* Function ma600_reset (driver)
*
* This function resets the ma600 dongle. Warning, this function
* must be called with a process context!!
*
* Algorithm:
* 0. DTR=0, RTS=1 and wait 10 ms
* 1. DTR=1, RTS=1 and wait 10 ms
* 2. 9600 bps now
*/
int ma600_reset(struct irda_task *task)
{
dongle_t *self = (dongle_t *) task->instance;
int ret = 0;
IRDA_DEBUG(2, __FUNCTION__ "()\n");
ASSERT(task != NULL, return -1;);
if (self->reset_task && self->reset_task != task) {
IRDA_DEBUG(0, __FUNCTION__ "(), busy!\n");
return MSECS_TO_JIFFIES(10);
} else
self->reset_task = task;
switch (task->state) {
case IRDA_TASK_INIT:
/* Clear DTR and Set RTS */
self->set_dtr_rts(self->dev, FALSE, TRUE);
irda_task_next_state(task, IRDA_TASK_WAIT1);
ret = MSECS_TO_JIFFIES(10); /* Sleep 10 ms */
break;
case IRDA_TASK_WAIT1:
/* Set DTR and RTS */
self->set_dtr_rts(self->dev, TRUE, TRUE);
irda_task_next_state(task, IRDA_TASK_WAIT2);
ret = MSECS_TO_JIFFIES(10); /* Sleep 10 ms */
break;
case IRDA_TASK_WAIT2:
irda_task_next_state(task, IRDA_TASK_DONE);
self->reset_task = NULL;
break;
default:
ERROR(__FUNCTION__ "(), unknown state %d\n", task->state);
irda_task_next_state(task, IRDA_TASK_DONE);
self->reset_task = NULL;
ret = -1;
}
return ret;
}
MODULE_AUTHOR("Leung <95Etwl@alumni.ee.ust.hk> http://www.engsvr.ust/~eetwl95");
MODULE_DESCRIPTION("MA600 dongle driver version 0.1");
MODULE_LICENSE("GPL");
/*
* Function init_module (void)
*
* Initialize MA600 module
*
*/
module_init(ma600_init);
/*
* Function cleanup_module (void)
*
* Cleanup MA600 module
*
*/
module_exit(ma600_cleanup);
......@@ -68,6 +68,8 @@ typedef enum {
IRDA_OLD_BELKIN_DONGLE = 7,
IRDA_EP7211_IR = 8,
IRDA_MCP2120_DONGLE = 9,
IRDA_ACT200L_DONGLE = 10,
IRDA_MA600_DONGLE = 11,
} IRDA_DONGLE;
/* Protocol types to be used for SOCK_DGRAM */
......
......@@ -36,7 +36,7 @@
#include <net/irda/irda.h>
#include <net/irda/irqueue.h>
#define DISCOVERY_EXPIRE_TIMEOUT 6*HZ
#define DISCOVERY_EXPIRE_TIMEOUT (2*sysctl_discovery_timeout*HZ)
#define DISCOVERY_DEFAULT_SLOTS 0
/* Types of discovery */
......
......@@ -514,7 +514,7 @@ int ircomm_proc_read(char *buf, char **start, off_t offset, int len)
self = (struct ircomm_cb *) hashbin_get_first(ircomm);
while (self != NULL) {
ASSERT(self->magic == IRCOMM_MAGIC, return len;);
ASSERT(self->magic == IRCOMM_MAGIC, break;);
if(self->line < 0x10)
len += sprintf(buf+len, "ircomm%d", self->line);
......
......@@ -525,6 +525,9 @@ static void ircomm_tty_close(struct tty_struct *tty, struct file *filp)
if (!tty)
return;
ASSERT(self != NULL, return;);
ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
save_flags(flags);
cli();
......@@ -536,9 +539,6 @@ static void ircomm_tty_close(struct tty_struct *tty, struct file *filp)
return;
}
ASSERT(self != NULL, return;);
ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
if ((tty->count == 1) && (self->open_count != 1)) {
/*
* Uh, oh. tty->count is 1, which means that the tty
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment