Merge branches 'pm-sleep' and 'pm-cpufreq'

* pm-sleep:
  PM / sleep: fix freeze_ops NULL pointer dereferences
  PM / sleep: Fix request_firmware() error at resume

* pm-cpufreq:
  cpufreq: make table sentinel macros unsigned to match use
  cpufreq: move policy kobj to policy->cpu at resume
  cpufreq: cpu0: OPPs can be populated at runtime
  cpufreq: kirkwood: Reinstate cpufreq driver for ARCH_KIRKWOOD
  cpufreq: imx6q: Select PM_OPP
  cpufreq: sa1110: set memory type for h3600

Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt

@@ -8,10 +8,12 @@ Both required and optional properties listed below must be defined
 under node /cpus/cpu@0.
 
 Required properties:
-- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt
-  for details
+- None
 
 Optional properties:
+- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt for
+  details. OPPs *must* be supplied either via DT, i.e. this property, or
+  populated at runtime.
 - clock-latency: Specify the possible maximum transition latency for clock,
   in unit of nanoseconds.
 - voltage-tolerance: Specify the CPU voltage tolerance in percentage.

drivers/cpufreq/Kconfig.arm

@@ -104,6 +104,7 @@ config ARM_IMX6Q_CPUFREQ
 	tristate "Freescale i.MX6 cpufreq support"
 	depends on ARCH_MXC
 	depends on REGULATOR_ANATOP
+	select PM_OPP
 	help
 	  This adds cpufreq driver support for Freescale i.MX6 series SoCs.
 
@@ -118,7 +119,7 @@ config ARM_INTEGRATOR
 	  If in doubt, say Y.
 
 config ARM_KIRKWOOD_CPUFREQ
-	def_bool MACH_KIRKWOOD
+	def_bool ARCH_KIRKWOOD || MACH_KIRKWOOD
 	help
 	  This adds the CPUFreq driver for Marvell Kirkwood
 	  SoCs.

drivers/cpufreq/cpufreq-cpu0.c

@@ -152,11 +152,8 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev)
 		goto out_put_reg;
 	}
 
-	ret = of_init_opp_table(cpu_dev);
-	if (ret) {
-		pr_err("failed to init OPP table: %d\n", ret);
-		goto out_put_clk;
-	}
+	/* OPPs might be populated at runtime, don't check for error here */
+	of_init_opp_table(cpu_dev);
 
 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
 	if (ret) {

drivers/cpufreq/cpufreq.c

@@ -1153,10 +1153,12 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif)
 	 * the creation of a brand new one. So we need to perform this update
 	 * by invoking update_policy_cpu().
 	 */
-	if (recover_policy && cpu != policy->cpu)
+	if (recover_policy && cpu != policy->cpu) {
 		update_policy_cpu(policy, cpu);
-	else
+		WARN_ON(kobject_move(&policy->kobj, &dev->kobj));
+	} else {
 		policy->cpu = cpu;
+	}
 
 	cpumask_copy(policy->cpus, cpumask_of(cpu));
 

drivers/cpufreq/sa1110-cpufreq.c

@@ -349,7 +349,7 @@ static int __init sa1110_clk_init(void)
 			name = "K4S641632D";
 		if (machine_is_h3100())
 			name = "KM416S4030CT";
-		if (machine_is_jornada720())
+		if (machine_is_jornada720() || machine_is_h3600())
 			name = "K4S281632B-1H";
 		if (machine_is_nanoengine())
 			name = "MT48LC8M16A2TG-75";

include/linux/cpufreq.h

@@ -482,8 +482,8 @@ extern struct cpufreq_governor cpufreq_gov_conservative;
  *********************************************************************/
 
 /* Special Values of .frequency field */
-#define CPUFREQ_ENTRY_INVALID	~0
-#define CPUFREQ_TABLE_END	~1
+#define CPUFREQ_ENTRY_INVALID	~0u
+#define CPUFREQ_TABLE_END	~1u
 /* Special Values of .flags field */
 #define CPUFREQ_BOOST_FREQ	(1 << 0)
 

kernel/power/process.c

@@ -186,6 +186,7 @@ void thaw_processes(void)
 
 	printk("Restarting tasks ... ");
 
+	__usermodehelper_set_disable_depth(UMH_FREEZING);
 	thaw_workqueues();
 
 	read_lock(&tasklist_lock);

kernel/power/suspend.c

@@ -306,7 +306,7 @@ int suspend_devices_and_enter(suspend_state_t state)
 		error = suspend_ops->begin(state);
 		if (error)
 			goto Close;
-	} else if (state == PM_SUSPEND_FREEZE && freeze_ops->begin) {
+	} else if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->begin) {
 		error = freeze_ops->begin();
 		if (error)
 			goto Close;
@@ -335,7 +335,7 @@ int suspend_devices_and_enter(suspend_state_t state)
  Close:
 	if (need_suspend_ops(state) && suspend_ops->end)
 		suspend_ops->end();
-	else if (state == PM_SUSPEND_FREEZE && freeze_ops->end)
+	else if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->end)
 		freeze_ops->end();
 
 	return error;