Commit 3a5c419f authored by Fabio Estevam's avatar Fabio Estevam Committed by Hans Verkuil

media: dt-bindings: Add OV5642

As explained in the description text from trivial-devices.yaml:

"This is a list of trivial I2C and SPI devices that have simple device tree
bindings, consisting only of a compatible field, an address and possibly an
interrupt line."

A camera device does not fall into this category as it needs other
properties such as regulators, reset and powerdown GPIOs, clocks,
media endpoint.

Remove the OV5642 entry from trivial-devices.yaml and add its own
ovti,ov5642.yaml.
Signed-off-by: default avatarFabio Estevam <festevam@denx.de>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
parent 4af8528f
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/ovti,ov5642.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: OmniVision OV5642 Image Sensor
maintainers:
- Fabio Estevam <festevam@gmail.com>
allOf:
- $ref: /schemas/media/video-interface-devices.yaml#
properties:
compatible:
const: ovti,ov5642
reg:
maxItems: 1
clocks:
description: XCLK Input Clock
AVDD-supply:
description: Analog voltage supply, 2.8V.
DVDD-supply:
description: Digital core voltage supply, 1.5V.
DOVDD-supply:
description: Digital I/O voltage supply, 1.8V.
powerdown-gpios:
maxItems: 1
description: Reference to the GPIO connected to the powerdown pin, if any.
reset-gpios:
maxItems: 1
description: Reference to the GPIO connected to the reset pin, if any.
port:
$ref: /schemas/graph.yaml#/$defs/port-base
description: |
Video output port.
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
properties:
bus-type:
enum: [5, 6]
bus-width:
enum: [8, 10]
default: 10
data-shift:
enum: [0, 2]
default: 0
hsync-active:
enum: [0, 1]
default: 1
vsync-active:
enum: [0, 1]
default: 1
pclk-sample:
enum: [0, 1]
default: 1
allOf:
- if:
properties:
bus-type:
const: 6
then:
properties:
hsync-active: false
vsync-active: false
- if:
properties:
bus-width:
const: 10
then:
properties:
data-shift:
const: 0
required:
- bus-type
additionalProperties: false
required:
- compatible
- reg
- clocks
- port
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/media/video-interfaces.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
camera@3c {
compatible = "ovti,ov5642";
reg = <0x3c>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ov5642>;
clocks = <&clk_ext_camera>;
DOVDD-supply = <&vgen4_reg>;
AVDD-supply = <&vgen3_reg>;
DVDD-supply = <&vgen2_reg>;
powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
port {
ov5642_to_parallel: endpoint {
bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
remote-endpoint = <&parallel_from_ov5642>;
bus-width = <8>;
data-shift = <2>; /* lines 9:2 are used */
hsync-active = <0>;
vsync-active = <0>;
pclk-sample = <1>;
};
};
};
};
......@@ -311,8 +311,6 @@ properties:
- nuvoton,w83773g
# OKI ML86V7667 video decoder
- oki,ml86v7667
# OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus
- ovti,ov5642
# 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch
- plx,pex8648
# Pulsedlight LIDAR range-finding sensor
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment