tty/serial: at91: Handle shutdown more safely

commit 0cc7c6c7 upstream.

Interrupts were being cleaned up late in the shutdown handler, it is possible
that an interrupt can occur and schedule a tasklet that runs after the port is
cleaned up. There is a null dereference due to this race condition with the
following stacktrace:

[<c02092b0>] (atmel_tasklet_func+0x514/0x814) from [<c001fd34>] (tasklet_action+0x70/0xa8)
[<c001fd34>] (tasklet_action+0x70/0xa8) from [<c001f60c>] (__do_softirq+0x90/0x144)
[<c001f60c>] (__do_softirq+0x90/0x144) from [<c001fa18>] (irq_exit+0x40/0x4c)
[<c001fa18>] (irq_exit+0x40/0x4c) from [<c000e298>] (handle_IRQ+0x64/0x84)
[<c000e298>] (handle_IRQ+0x64/0x84) from [<c000d6c0>] (__irq_svc+0x40/0x50)
[<c000d6c0>] (__irq_svc+0x40/0x50) from [<c0208060>] (atmel_rx_dma_release+0x88/0xb8)
[<c0208060>] (atmel_rx_dma_release+0x88/0xb8) from [<c0209740>] (atmel_shutdown+0x104/0x160)
[<c0209740>] (atmel_shutdown+0x104/0x160) from [<c0205e8c>] (uart_port_shutdown+0x2c/0x38)
Signed-off-by: Marek Roszko <mark.roszko@gmail.com>
Acked-by: Leilei Zhao <leilei.zhao@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/atmel_serial.c

@@ -1022,12 +1022,24 @@ static int atmel_startup(struct uart_port *port)
 static void atmel_shutdown(struct uart_port *port)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
 	/*
-	 * Ensure everything is stopped.
+	 * Clear out any scheduled tasklets before
+	 * we destroy the buffers
+	 */
+	tasklet_kill(&atmel_port->tasklet);
+
+	/*
+	 * Ensure everything is stopped and
+	 * disable all interrupts, port and break condition.
 	 */
 	atmel_stop_rx(port);
 	atmel_stop_tx(port);
 
+	UART_PUT_CR(port, ATMEL_US_RSTSTA);
+	UART_PUT_IDR(port, -1);
+
+
 	/*
 	 * Shut-down the DMA.
 	 */
@@ -1053,12 +1065,6 @@ static void atmel_shutdown(struct uart_port *port)
 				 DMA_TO_DEVICE);
 	}
 
-	/*
-	 * Disable all interrupts, port and break condition.
-	 */
-	UART_PUT_CR(port, ATMEL_US_RSTSTA);
-	UART_PUT_IDR(port, -1);
-
 	/*
 	 * Free the interrupt
 	 */