Commit 3aa20d1f authored by Conor Dooley's avatar Conor Dooley

firmware: microchip: clarify that sizes and addresses are in hex

As it says on the tin. It can be kinda confusing when "22830" is in hex,
so prefix the hex numbers with a "0x".
Signed-off-by: default avatarConor Dooley <conor.dooley@microchip.com>
parent 6e3b7e86
...@@ -267,7 +267,7 @@ static int mpfs_auto_update_set_image_address(struct mpfs_auto_update_priv *priv ...@@ -267,7 +267,7 @@ static int mpfs_auto_update_set_image_address(struct mpfs_auto_update_priv *priv
AUTO_UPDATE_DIRECTORY_WIDTH); AUTO_UPDATE_DIRECTORY_WIDTH);
memset(buffer + AUTO_UPDATE_BLANK_DIRECTORY, 0x0, AUTO_UPDATE_DIRECTORY_WIDTH); memset(buffer + AUTO_UPDATE_BLANK_DIRECTORY, 0x0, AUTO_UPDATE_DIRECTORY_WIDTH);
dev_info(priv->dev, "Writing the image address (%x) to the flash directory (%llx)\n", dev_info(priv->dev, "Writing the image address (0x%x) to the flash directory (0x%llx)\n",
image_address, directory_address); image_address, directory_address);
ret = mtd_write(priv->flash, 0x0, erase_size, &bytes_written, (u_char *)buffer); ret = mtd_write(priv->flash, 0x0, erase_size, &bytes_written, (u_char *)buffer);
...@@ -315,7 +315,7 @@ static int mpfs_auto_update_write_bitstream(struct fw_upload *fw_uploader, const ...@@ -315,7 +315,7 @@ static int mpfs_auto_update_write_bitstream(struct fw_upload *fw_uploader, const
erase.len = round_up(size, (size_t)priv->flash->erasesize); erase.len = round_up(size, (size_t)priv->flash->erasesize);
erase.addr = image_address; erase.addr = image_address;
dev_info(priv->dev, "Erasing the flash at address (%x)\n", image_address); dev_info(priv->dev, "Erasing the flash at address (0x%x)\n", image_address);
ret = mtd_erase(priv->flash, &erase); ret = mtd_erase(priv->flash, &erase);
if (ret) if (ret)
goto out; goto out;
...@@ -325,7 +325,7 @@ static int mpfs_auto_update_write_bitstream(struct fw_upload *fw_uploader, const ...@@ -325,7 +325,7 @@ static int mpfs_auto_update_write_bitstream(struct fw_upload *fw_uploader, const
* will do all of that itself - including verifying that the bitstream * will do all of that itself - including verifying that the bitstream
* is valid. * is valid.
*/ */
dev_info(priv->dev, "Writing the image to the flash at address (%x)\n", image_address); dev_info(priv->dev, "Writing the image to the flash at address (0x%x)\n", image_address);
ret = mtd_write(priv->flash, (loff_t)image_address, size, &bytes_written, data); ret = mtd_write(priv->flash, (loff_t)image_address, size, &bytes_written, data);
if (ret) if (ret)
goto out; goto out;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment