net: fec: align IP header in hardware

The FEC receive accelerator (RACC) supports shifting the data payload of
received packets by 16-bits, which aligns the payload (IP header) on a
4-byte boundary, which is, if not required, at least strongly suggested
by the Linux networking layer.

Without this patch, a huge number of alignment faults will be taken by the
IP stack, as seen in /proc/cpu/alignment:

	~/$ cat /proc/cpu/alignment
	User:		0
	System:		72645 (inet_gro_receive+0x104/0x27c)
	Skipped:	0
	Half:		0
	Word:		0
	DWord:		0
	Multi:		72645
	User faults:	3 (fixup+warn)

This patch was suggested by Andrew Lunn in this message to linux-netdev:
	http://marc.info/?l=linux-arm-kernel&m=147465452108384&w=2

and adapted from a patch by Russell King from 2014:
	http://git.arm.linux.org.uk/cgit/linux-arm.git/commit/?id=70d8a8aSigned-off-by: Eric Nelson <eric@nelint.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/freescale/fec_main.c

@@ -180,6 +180,7 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
 /* FEC receive acceleration */
 #define FEC_RACC_IPDIS		(1 << 1)
 #define FEC_RACC_PRODIS		(1 << 2)
+#define FEC_RACC_SHIFT16	BIT(7)
 #define FEC_RACC_OPTIONS	(FEC_RACC_IPDIS | FEC_RACC_PRODIS)
 
 /*
@@ -945,9 +946,11 @@ fec_restart(struct net_device *ndev)
 
 #if !defined(CONFIG_M5272)
 	if (fep->quirks & FEC_QUIRK_HAS_RACC) {
-		/* set RX checksum */
 		val = readl(fep->hwp + FEC_RACC);
+		/* align IP header */
+		val |= FEC_RACC_SHIFT16;
 		if (fep->csum_flags & FLAG_RX_CSUM_ENABLED)
+			/* set RX checksum */
 			val |= FEC_RACC_OPTIONS;
 		else
 			val &= ~FEC_RACC_OPTIONS;
@@ -1428,6 +1431,12 @@ fec_enet_rx_queue(struct net_device *ndev, int budget, u16 queue_id)
 		prefetch(skb->data - NET_IP_ALIGN);
 		skb_put(skb, pkt_len - 4);
 		data = skb->data;
+
+#if !defined(CONFIG_M5272)
+		if (fep->quirks & FEC_QUIRK_HAS_RACC)
+			data = skb_pull_inline(skb, 2);
+#endif
+
 		if (!is_copybreak && need_swap)
 			swap_buffer(data, pkt_len);