thermal: exynos: Miscellaneous fixes to support falling threshold interrupt

Below fixes are done to support falling threshold interrupt,
* Falling interrupt status macro corrected according to exynos5 data sheet.
* The get trend function modified to calculate trip temperature correctly.
* The clearing of interrupt status in the isr is now done after handling
  the event that caused the interrupt.
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

drivers/thermal/exynos_thermal.c

@@ -82,7 +82,7 @@
 
 #define EXYNOS_TRIMINFO_RELOAD		0x1
 #define EXYNOS_TMU_CLEAR_RISE_INT	0x111
-#define EXYNOS_TMU_CLEAR_FALL_INT	(0x111 << 16)
+#define EXYNOS_TMU_CLEAR_FALL_INT	(0x111 << 12)
 #define EXYNOS_MUX_ADDR_VALUE		6
 #define EXYNOS_MUX_ADDR_SHIFT		20
 #define EXYNOS_TMU_TRIP_MODE_SHIFT	13
@@ -370,7 +370,14 @@ static int exynos_get_temp(struct thermal_zone_device *thermal,
 static int exynos_get_trend(struct thermal_zone_device *thermal,
 			int trip, enum thermal_trend *trend)
 {
-	if (thermal->temperature >= trip)
+	int ret;
+	unsigned long trip_temp;
+
+	ret = exynos_get_trip_temp(thermal, trip, &trip_temp);
+	if (ret < 0)
+		return ret;
+
+	if (thermal->temperature >= trip_temp)
 		*trend = THERMAL_TREND_RAISING;
 	else
 		*trend = THERMAL_TREND_DROPPING;
@@ -705,20 +712,18 @@ static void exynos_tmu_work(struct work_struct *work)
 	struct exynos_tmu_data *data = container_of(work,
 			struct exynos_tmu_data, irq_work);
 
+	exynos_report_trigger();
 	mutex_lock(&data->lock);
 	clk_enable(data->clk);
-
-
 	if (data->soc == SOC_ARCH_EXYNOS)
 		writel(EXYNOS_TMU_CLEAR_RISE_INT,
 				data->base + EXYNOS_TMU_REG_INTCLEAR);
 	else
 		writel(EXYNOS4210_TMU_INTCLEAR_VAL,
 				data->base + EXYNOS_TMU_REG_INTCLEAR);
-
 	clk_disable(data->clk);
 	mutex_unlock(&data->lock);
-	exynos_report_trigger();
+
 	enable_irq(data->irq);
 }