mmc: core: Convert to use __mmc_poll_for_busy() SD_APP_OP_COND too

Similar to what has already been changed for eMMC and the MMC_SEND_OP_COND
(CMD1), let's convert the SD_APP_OP_COND (ACMD41) for SD cards to use the
common __mmc_poll_for_busy() too.

This change means the initial delay period, that starts as 10ms will now
increase for every loop when being busy. The total accepted timeout for
being busy is 1s, which is according to the SD spec.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Felix Qin <xiaokeqinhealth@126.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240425133034.79599-1-ulf.hansson@linaro.org

drivers/mmc/core/sd_ops.c

@@ -19,6 +19,15 @@
 #include "sd_ops.h"
 #include "mmc_ops.h"
 
+#define SD_APP_OP_COND_PERIOD_US	(10 * 1000) /* 10ms */
+#define SD_APP_OP_COND_TIMEOUT_MS	1000 /* 1s */
+
+struct sd_app_op_cond_busy_data {
+	struct mmc_host *host;
+	u32 ocr;
+	struct mmc_command *cmd;
+};
+
 int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card)
 {
 	int err;
@@ -115,10 +124,45 @@ int mmc_app_set_bus_width(struct mmc_card *card, int width)
 	return mmc_wait_for_app_cmd(card->host, card, &cmd);
 }
 
+static int sd_app_op_cond_cb(void *cb_data, bool *busy)
+{
+	struct sd_app_op_cond_busy_data *data = cb_data;
+	struct mmc_host *host = data->host;
+	struct mmc_command *cmd = data->cmd;
+	u32 ocr = data->ocr;
+	int err;
+
+	*busy = false;
+
+	err = mmc_wait_for_app_cmd(host, NULL, cmd);
+	if (err)
+		return err;
+
+	/* If we're just probing, do a single pass. */
+	if (ocr == 0)
+		return 0;
+
+	/* Wait until reset completes. */
+	if (mmc_host_is_spi(host)) {
+		if (!(cmd->resp[0] & R1_SPI_IDLE))
+			return 0;
+	} else if (cmd->resp[0] & MMC_CARD_BUSY) {
+		return 0;
+	}
+
+	*busy = true;
+	return 0;
+}
+
 int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
 {
 	struct mmc_command cmd = {};
-	int i, err = 0;
+	struct sd_app_op_cond_busy_data cb_data = {
+		.host = host,
+		.ocr = ocr,
+		.cmd = &cmd
+	};
+	int err;
 
 	cmd.opcode = SD_APP_OP_COND;
 	if (mmc_host_is_spi(host))
@@ -127,36 +171,16 @@ int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
 		cmd.arg = ocr;
 	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR;
 
-	for (i = 100; i; i--) {
-		err = mmc_wait_for_app_cmd(host, NULL, &cmd);
-		if (err)
-			break;
-
-		/* if we're just probing, do a single pass */
-		if (ocr == 0)
-			break;
-
-		/* otherwise wait until reset completes */
-		if (mmc_host_is_spi(host)) {
-			if (!(cmd.resp[0] & R1_SPI_IDLE))
-				break;
-		} else {
-			if (cmd.resp[0] & MMC_CARD_BUSY)
-				break;
-		}
-
-		err = -ETIMEDOUT;
-
-		mmc_delay(10);
-	}
-
-	if (!i)
-		pr_err("%s: card never left busy state\n", mmc_hostname(host));
+	err = __mmc_poll_for_busy(host, SD_APP_OP_COND_PERIOD_US,
+				  SD_APP_OP_COND_TIMEOUT_MS, &sd_app_op_cond_cb,
+				  &cb_data);
+	if (err)
+		return err;
 
 	if (rocr && !mmc_host_is_spi(host))
 		*rocr = cmd.resp[0];
 
-	return err;
+	return 0;
 }
 
 static int __mmc_send_if_cond(struct mmc_host *host, u32 ocr, u8 pcie_bits,