Commit 3b68d70d authored by Lennert Buytenhek's avatar Lennert Buytenhek Committed by Linus Torvalds

[PATCH] cs89x0: cleanly implement ixdp2x01 and pnx0501 support

Implement suitable versions of the readword/writeword macros for ixdp2x01 and
pnx0501.  Handle the 32-bit spacing of the registers in these functions
instead of in the header file.
Signed-off-by: default avatarLennert Buytenhek <buytenh@wantstofly.org>
Cc: dmitry pervushin <dpervushin@ru.mvista.com>
Cc: <dsaxena@plexity.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 3eaa5e7d
......@@ -338,6 +338,32 @@ struct net_device * __init cs89x0_probe(int unit)
}
#endif
#if defined(CONFIG_ARCH_IXDP2X01)
static int
readword(unsigned long base_addr, int portno)
{
return (u16)__raw_readl(base_addr + (portno << 1));
}
static void
writeword(unsigned long base_addr, int portno, int value)
{
__raw_writel((u16)value, base_addr + (portno << 1));
}
#else
#if defined(CONFIG_ARCH_PNX0501)
static int
readword(unsigned long base_addr, int portno)
{
return inw(base_addr + (portno << 1));
}
static void
writeword(unsigned long base_addr, int portno, int value)
{
outw(value, base_addr + (portno << 1));
}
#else
static int
readword(unsigned long base_addr, int portno)
{
......@@ -349,6 +375,8 @@ writeword(unsigned long base_addr, int portno, int value)
{
outw(value, base_addr + portno);
}
#endif
#endif
static int
readreg(struct net_device *dev, int regno)
......
......@@ -16,13 +16,6 @@
#include <linux/config.h>
#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105)
/* IXDP2401/IXDP2801 uses dword-aligned register addressing */
#define CS89x0_PORT(reg) ((reg) * 2)
#else
#define CS89x0_PORT(reg) (reg)
#endif
#define PP_ChipID 0x0000 /* offset 0h -> Corp -ID */
/* offset 2h -> Model/Product Number */
/* offset 3h -> Chip Revision Number */
......@@ -332,16 +325,16 @@
#define RAM_SIZE 0x1000 /* The card has 4k bytes or RAM */
#define PKT_START PP_TxFrame /* Start of packet RAM */
#define RX_FRAME_PORT CS89x0_PORT(0x0000)
#define RX_FRAME_PORT 0x0000
#define TX_FRAME_PORT RX_FRAME_PORT
#define TX_CMD_PORT CS89x0_PORT(0x0004)
#define TX_CMD_PORT 0x0004
#define TX_NOW 0x0000 /* Tx packet after 5 bytes copied */
#define TX_AFTER_381 0x0040 /* Tx packet after 381 bytes copied */
#define TX_AFTER_ALL 0x00c0 /* Tx packet after all bytes copied */
#define TX_LEN_PORT CS89x0_PORT(0x0006)
#define ISQ_PORT CS89x0_PORT(0x0008)
#define ADD_PORT CS89x0_PORT(0x000A)
#define DATA_PORT CS89x0_PORT(0x000C)
#define TX_LEN_PORT 0x0006
#define ISQ_PORT 0x0008
#define ADD_PORT 0x000A
#define DATA_PORT 0x000C
#define EEPROM_WRITE_EN 0x00F0
#define EEPROM_WRITE_DIS 0x0000
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment