Commit 3b818080 authored by Roland Vossen's avatar Roland Vossen Committed by Greg Kroah-Hartman

staging: brcm80211: removed unused error codes

Code cleanup.
Signed-off-by: default avatarRoland Vossen <rvossen@broadcom.com>
Reviewed-by: default avatarArend van Spriel <arend@broadcom.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 6b80b247
...@@ -254,13 +254,10 @@ extern struct sk_buff *pktq_mdeq(struct pktq *pq, uint prec_bmp, int *prec_out); ...@@ -254,13 +254,10 @@ extern struct sk_buff *pktq_mdeq(struct pktq *pq, uint prec_bmp, int *prec_out);
#define BCME_OK 0 /* Success */ #define BCME_OK 0 /* Success */
#define BCME_ERROR -1 /* Error generic */ #define BCME_ERROR -1 /* Error generic */
#define BCME_BADARG -2 /* Bad Argument */ #define BCME_BADARG -2 /* Bad Argument */
#define BCME_BADOPTION -3 /* Bad option */
#define BCME_NOTUP -4 /* Not up */ #define BCME_NOTUP -4 /* Not up */
#define BCME_NOTDOWN -5 /* Not down */ #define BCME_NOTDOWN -5 /* Not down */
#define BCME_NOTAP -6 /* Not AP */
#define BCME_NOTSTA -7 /* Not STA */
#define BCME_BADKEYIDX -8 /* BAD Key Index */ #define BCME_BADKEYIDX -8 /* BAD Key Index */
#define BCME_RADIOOFF -9 /* Radio Off */ #define BCME_RADIOOFF -9 /* Radio Off */
#define BCME_NOTBANDLOCKED -10 /* Not band locked */ #define BCME_NOTBANDLOCKED -10 /* Not band locked */
#define BCME_NOCLK -11 /* No Clock */ #define BCME_NOCLK -11 /* No Clock */
#define BCME_BADRATESET -12 /* BAD Rate valueset */ #define BCME_BADRATESET -12 /* BAD Rate valueset */
...@@ -268,31 +265,19 @@ extern struct sk_buff *pktq_mdeq(struct pktq *pq, uint prec_bmp, int *prec_out); ...@@ -268,31 +265,19 @@ extern struct sk_buff *pktq_mdeq(struct pktq *pq, uint prec_bmp, int *prec_out);
#define BCME_BUFTOOSHORT -14 /* Buffer too short */ #define BCME_BUFTOOSHORT -14 /* Buffer too short */
#define BCME_BUFTOOLONG -15 /* Buffer too long */ #define BCME_BUFTOOLONG -15 /* Buffer too long */
#define BCME_BUSY -16 /* Busy */ #define BCME_BUSY -16 /* Busy */
#define BCME_NOTASSOCIATED -17 /* Not Associated */
#define BCME_BADSSIDLEN -18 /* Bad SSID len */
#define BCME_OUTOFRANGECHAN -19 /* Out of Range Channel */ #define BCME_OUTOFRANGECHAN -19 /* Out of Range Channel */
#define BCME_BADCHAN -20 /* Bad Channel */ #define BCME_BADCHAN -20 /* Bad Channel */
#define BCME_BADADDR -21 /* Bad Address */ #define BCME_BADADDR -21 /* Bad Address */
#define BCME_NORESOURCE -22 /* Not Enough Resources */ #define BCME_NORESOURCE -22 /* Not Enough Resources */
#define BCME_UNSUPPORTED -23 /* Unsupported */ #define BCME_UNSUPPORTED -23 /* Unsupported */
#define BCME_BADLEN -24 /* Bad length */
#define BCME_NOTREADY -25 /* Not Ready */ #define BCME_NOTREADY -25 /* Not Ready */
#define BCME_EPERM -26 /* Not Permitted */ #define BCME_EPERM -26 /* Not Permitted */
#define BCME_NOMEM -27 /* No Memory */ #define BCME_NOMEM -27 /* No Memory */
#define BCME_ASSOCIATED -28 /* Associated */ #define BCME_ASSOCIATED -28 /* Associated */
#define BCME_RANGE -29 /* Not In Range */ #define BCME_RANGE -29 /* Not In Range */
#define BCME_NOTFOUND -30 /* Not Found */ #define BCME_NOTFOUND -30 /* Not Found */
#define BCME_WME_NOT_ENABLED -31 /* WME Not Enabled */
#define BCME_TSPEC_NOTFOUND -32 /* TSPEC Not Found */
#define BCME_ACM_NOTSUPPORTED -33 /* ACM Not Supported */
#define BCME_NOT_WME_ASSOCIATION -34 /* Not WME Association */
#define BCME_SDIO_ERROR -35 /* SDIO Bus Error */ #define BCME_SDIO_ERROR -35 /* SDIO Bus Error */
#define BCME_DONGLE_DOWN -36 /* Dongle Not Accessible */ #define BCME_DONGLE_DOWN -36 /* Dongle Not Accessible */
#define BCME_VERSION -37 /* Incorrect version */
#define BCME_TXFAIL -38 /* TX failure */
#define BCME_RXFAIL -39 /* RX failure */
#define BCME_NODEVICE -40 /* Device not present */
#define BCME_NMODE_DISABLED -41 /* NMODE disabled */
#define BCME_NONRESIDENT -42 /* access to nonresident overlay */ #define BCME_NONRESIDENT -42 /* access to nonresident overlay */
#define BCME_LAST BCME_NONRESIDENT #define BCME_LAST BCME_NONRESIDENT
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment