Commit 3bda2418 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  [PATCH] spidernet: rework tx queue handling
  [PATCH] spidernet: bug fix for init code
  [PATCH] sky2: NAPI poll fix
  [NET] ethtool: fix oops by testing correct struct member
  e1000: bump version to 7.1.9-k4
  e1000: fix panic on large frame receive when mtu=default
  e1000: remove CRC bytes from measured packet length
  e1000: Redo netpoll fix to address community concerns
parents f5beec49 bdd01503
......@@ -110,6 +110,9 @@ struct e1000_adapter;
#define E1000_MIN_RXD 80
#define E1000_MAX_82544_RXD 4096
/* this is the size past which hardware will drop packets when setting LPE=0 */
#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
/* Supported Rx Buffer Sizes */
#define E1000_RXBUFFER_128 128 /* Used for packet split */
#define E1000_RXBUFFER_256 256 /* Used for packet split */
......
......@@ -36,7 +36,7 @@ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
#else
#define DRIVERNAPI "-NAPI"
#endif
#define DRV_VERSION "7.1.9-k2"DRIVERNAPI
#define DRV_VERSION "7.1.9-k4"DRIVERNAPI
char e1000_driver_version[] = DRV_VERSION;
static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
......@@ -1068,7 +1068,7 @@ e1000_sw_init(struct e1000_adapter *adapter)
pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
adapter->rx_buffer_len = MAXIMUM_ETHERNET_FRAME_SIZE;
adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
adapter->rx_ps_bsize0 = E1000_RXBUFFER_128;
hw->max_frame_size = netdev->mtu +
ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
......@@ -3148,7 +3148,6 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu)
adapter->rx_buffer_len = E1000_RXBUFFER_16384;
/* adjust allocation if LPE protects us, and we aren't using SBP */
#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
if (!adapter->hw.tbi_compatibility_on &&
((max_frame == MAXIMUM_ETHERNET_FRAME_SIZE) ||
(max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
......@@ -3387,8 +3386,8 @@ e1000_intr(int irq, void *data, struct pt_regs *regs)
E1000_WRITE_REG(hw, IMC, ~0);
E1000_WRITE_FLUSH(hw);
}
if (likely(netif_rx_schedule_prep(&adapter->polling_netdev[0])))
__netif_rx_schedule(&adapter->polling_netdev[0]);
if (likely(netif_rx_schedule_prep(netdev)))
__netif_rx_schedule(netdev);
else
e1000_irq_enable(adapter);
#else
......@@ -3431,34 +3430,26 @@ e1000_clean(struct net_device *poll_dev, int *budget)
{
struct e1000_adapter *adapter;
int work_to_do = min(*budget, poll_dev->quota);
int tx_cleaned = 0, i = 0, work_done = 0;
int tx_cleaned = 0, work_done = 0;
/* Must NOT use netdev_priv macro here. */
adapter = poll_dev->priv;
/* Keep link state information with original netdev */
if (!netif_carrier_ok(adapter->netdev))
if (!netif_carrier_ok(poll_dev))
goto quit_polling;
while (poll_dev != &adapter->polling_netdev[i]) {
i++;
BUG_ON(i == adapter->num_rx_queues);
/* e1000_clean is called per-cpu. This lock protects
* tx_ring[0] from being cleaned by multiple cpus
* simultaneously. A failure obtaining the lock means
* tx_ring[0] is currently being cleaned anyway. */
if (spin_trylock(&adapter->tx_queue_lock)) {
tx_cleaned = e1000_clean_tx_irq(adapter,
&adapter->tx_ring[0]);
spin_unlock(&adapter->tx_queue_lock);
}
if (likely(adapter->num_tx_queues == 1)) {
/* e1000_clean is called per-cpu. This lock protects
* tx_ring[0] from being cleaned by multiple cpus
* simultaneously. A failure obtaining the lock means
* tx_ring[0] is currently being cleaned anyway. */
if (spin_trylock(&adapter->tx_queue_lock)) {
tx_cleaned = e1000_clean_tx_irq(adapter,
&adapter->tx_ring[0]);
spin_unlock(&adapter->tx_queue_lock);
}
} else
tx_cleaned = e1000_clean_tx_irq(adapter, &adapter->tx_ring[i]);
adapter->clean_rx(adapter, &adapter->rx_ring[i],
adapter->clean_rx(adapter, &adapter->rx_ring[0],
&work_done, work_to_do);
*budget -= work_done;
......@@ -3466,7 +3457,7 @@ e1000_clean(struct net_device *poll_dev, int *budget)
/* If no Tx and not enough Rx work done, exit the polling mode */
if ((!tx_cleaned && (work_done == 0)) ||
!netif_running(adapter->netdev)) {
!netif_running(poll_dev)) {
quit_polling:
netif_rx_complete(poll_dev);
e1000_irq_enable(adapter);
......@@ -3681,6 +3672,9 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
length = le16_to_cpu(rx_desc->length);
/* adjust length to remove Ethernet CRC */
length -= 4;
if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
/* All receives must fit into a single buffer */
E1000_DBG("%s: Receive packet consumed multiple"
......@@ -3885,8 +3879,9 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
pci_dma_sync_single_for_device(pdev,
ps_page_dma->ps_page_dma[0],
PAGE_SIZE, PCI_DMA_FROMDEVICE);
/* remove the CRC */
l1 -= 4;
skb_put(skb, l1);
length += l1;
goto copydone;
} /* if */
}
......@@ -3905,6 +3900,10 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
skb->truesize += length;
}
/* strip the ethernet crc, problem is we're using pages now so
* this whole operation can get a little cpu intensive */
pskb_trim(skb, skb->len - 4);
copydone:
e1000_rx_checksum(adapter, staterr,
le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
......@@ -4752,6 +4751,7 @@ static void
e1000_netpoll(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
disable_irq(adapter->pdev->irq);
e1000_intr(adapter->pdev->irq, netdev, NULL);
e1000_clean_tx_irq(adapter, adapter->tx_ring);
......
......@@ -50,7 +50,7 @@
#include "sky2.h"
#define DRV_NAME "sky2"
#define DRV_VERSION "1.4"
#define DRV_VERSION "1.5"
#define PFX DRV_NAME " "
/*
......@@ -2204,9 +2204,6 @@ static int sky2_poll(struct net_device *dev0, int *budget)
int work_done = 0;
u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
if (!~status)
goto out;
if (status & Y2_IS_HW_ERR)
sky2_hw_intr(hw);
......@@ -2243,7 +2240,7 @@ static int sky2_poll(struct net_device *dev0, int *budget)
if (sky2_more_work(hw))
return 1;
out:
netif_rx_complete(dev0);
sky2_read32(hw, B0_Y2_SP_LISR);
......
This diff is collapsed.
......@@ -208,7 +208,10 @@ extern char spider_net_driver_name[];
#define SPIDER_NET_DMA_RX_VALUE 0x80000000
#define SPIDER_NET_DMA_RX_FEND_VALUE 0x00030003
/* to set TX_DMA_EN */
#define SPIDER_NET_DMA_TX_VALUE 0x80000000
#define SPIDER_NET_TX_DMA_EN 0x80000000
#define SPIDER_NET_GDTDCEIDIS 0x00000002
#define SPIDER_NET_DMA_TX_VALUE SPIDER_NET_TX_DMA_EN | \
SPIDER_NET_GDTDCEIDIS
#define SPIDER_NET_DMA_TX_FEND_VALUE 0x00030003
/* SPIDER_NET_UA_DESCR_VALUE is OR'ed with the unicast address */
......@@ -329,55 +332,23 @@ enum spider_net_int2_status {
(~SPIDER_NET_TXINT) & \
(~SPIDER_NET_RXINT) )
#define SPIDER_NET_GPREXEC 0x80000000
#define SPIDER_NET_GPRDAT_MASK 0x0000ffff
#define SPIDER_NET_GPREXEC 0x80000000
#define SPIDER_NET_GPRDAT_MASK 0x0000ffff
/* descriptor bits
*
* 1010 descriptor ready
* 0 descr in middle of chain
* 000 fixed to 0
*
* 0 no interrupt on completion
* 000 fixed to 0
* 1 no ipsec processing
* 1 last descriptor for this frame
* 00 no checksum
* 10 tcp checksum
* 11 udp checksum
*
* 00 fixed to 0
* 0 fixed to 0
* 0 no interrupt on response errors
* 0 no interrupt on invalid descr
* 0 no interrupt on dma process termination
* 0 no interrupt on descr chain end
* 0 no interrupt on descr complete
*
* 000 fixed to 0
* 0 response error interrupt status
* 0 invalid descr status
* 0 dma termination status
* 0 descr chain end status
* 0 descr complete status */
#define SPIDER_NET_DMAC_CMDSTAT_NOCS 0xa00c0000
#define SPIDER_NET_DMAC_CMDSTAT_TCPCS 0xa00e0000
#define SPIDER_NET_DMAC_CMDSTAT_UDPCS 0xa00f0000
#define SPIDER_NET_DESCR_IND_PROC_SHIFT 28
#define SPIDER_NET_DESCR_IND_PROC_MASKO 0x0fffffff
/* descr ready, descr is in middle of chain, get interrupt on completion */
#define SPIDER_NET_DMAC_RX_CARDOWNED 0xa0800000
enum spider_net_descr_status {
SPIDER_NET_DESCR_COMPLETE = 0x00, /* used in rx and tx */
SPIDER_NET_DESCR_RESPONSE_ERROR = 0x01, /* used in rx and tx */
SPIDER_NET_DESCR_PROTECTION_ERROR = 0x02, /* used in rx and tx */
SPIDER_NET_DESCR_FRAME_END = 0x04, /* used in rx */
SPIDER_NET_DESCR_FORCE_END = 0x05, /* used in rx and tx */
SPIDER_NET_DESCR_CARDOWNED = 0x0a, /* used in rx and tx */
SPIDER_NET_DESCR_NOT_IN_USE /* any other value */
};
#define SPIDER_NET_DMAC_NOINTR_COMPLETE 0x00800000
#define SPIDER_NET_DMAC_NOCS 0x00040000
#define SPIDER_NET_DMAC_TCP 0x00020000
#define SPIDER_NET_DMAC_UDP 0x00030000
#define SPIDER_NET_TXDCEST 0x08000000
#define SPIDER_NET_DESCR_IND_PROC_MASK 0xF0000000
#define SPIDER_NET_DESCR_COMPLETE 0x00000000 /* used in rx and tx */
#define SPIDER_NET_DESCR_RESPONSE_ERROR 0x10000000 /* used in rx and tx */
#define SPIDER_NET_DESCR_PROTECTION_ERROR 0x20000000 /* used in rx and tx */
#define SPIDER_NET_DESCR_FRAME_END 0x40000000 /* used in rx */
#define SPIDER_NET_DESCR_FORCE_END 0x50000000 /* used in rx and tx */
#define SPIDER_NET_DESCR_CARDOWNED 0xA0000000 /* used in rx and tx */
#define SPIDER_NET_DESCR_NOT_IN_USE 0xF0000000
struct spider_net_descr {
/* as defined by the hardware */
......@@ -398,7 +369,7 @@ struct spider_net_descr {
} __attribute__((aligned(32)));
struct spider_net_descr_chain {
/* we walk from tail to head */
spinlock_t lock;
struct spider_net_descr *head;
struct spider_net_descr *tail;
};
......@@ -453,8 +424,6 @@ struct spider_net_card {
struct spider_net_descr_chain tx_chain;
struct spider_net_descr_chain rx_chain;
atomic_t rx_chain_refill;
atomic_t tx_chain_release;
struct net_device_stats netdev_stats;
......
......@@ -437,7 +437,7 @@ static int ethtool_set_pauseparam(struct net_device *dev, void __user *useraddr)
{
struct ethtool_pauseparam pauseparam;
if (!dev->ethtool_ops->get_pauseparam)
if (!dev->ethtool_ops->set_pauseparam)
return -EOPNOTSUPP;
if (copy_from_user(&pauseparam, useraddr, sizeof(pauseparam)))
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment